efi_loader: efi_variable_parse_signature() returns NULL on error

[oweals/u-boot.git] / README

diff --git a/README b/README
index 8cfa92fac9e54eedf72c1dd0f5a325f61297c12c..2e8ad3bc0cb1f18a983da5eb0d525a66bb26d0e2 100644 (file)
--- a/README
+++ b/README
@@ -896,8 +896,6 @@ The following options need to be configured:
 
                CONFIG_TULIP
                Support for Digital 2114x chips.
-               Optional CONFIG_TULIP_SELECT_MEDIA for board specific
-               modem chip initialisation (KS8761/QS6611).
 
                CONFIG_NATSEMI
                Support for National dp83815 chips.
@@ -1632,16 +1630,6 @@ The following options need to be configured:
                  - activate this driver with CONFIG_SYS_I2C_RCAR
                  - This driver adds 4 i2c buses
 
-                 - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0
-                 - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0
-                 - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1
-                 - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1
-                 - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2
-                 - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2
-                 - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3
-                 - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3
-                 - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses
-
                - drivers/i2c/sh_i2c.c:
                  - activate this driver with CONFIG_SYS_I2C_SH
                  - This driver adds from 2 to 5 i2c buses
@@ -3186,16 +3174,6 @@ necessary. For example using the ELDK on a 4xx CPU, please enter:
        $ CROSS_COMPILE=ppc_4xx-
        $ export CROSS_COMPILE
 
-Note: If you wish to generate Windows versions of the utilities in
-      the tools directory you can use the MinGW toolchain
-      (http://www.mingw.org).  Set your HOST tools to the MinGW
-      toolchain and execute 'make tools'.  For example:
-
-       $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
-
-      Binaries such as tools/mkimage.exe will be created which can
-      be executed on computers running Windows.
-
 U-Boot is intended to be simple to build. After installing the
 sources you must configure U-Boot for one specific board type. This
 is done by typing:
@@ -3203,9 +3181,9 @@ is done by typing:
        make NAME_defconfig
 
 where "NAME_defconfig" is the name of one of the existing configu-
-rations; see boards.cfg for supported names.
+rations; see configs/*_defconfig for supported names.
 
-Note: for some board special configuration names may exist; check if
+Note: for some boards special configuration names may exist; check if
       additional information is available from the board vendor; for
       instance, the TQM823L systems are available without (standard)
       or with LCD support. You can select such additional "features"
@@ -4639,7 +4617,7 @@ int main(int argc, char *argv[])
        while (learning) {
                Read the README file in the top level directory;
                Read http://www.denx.de/twiki/bin/view/DULG/Manual;
-               Read applicable doc/*.README;
+               Read applicable doc/README.*;
                Read the source, Luke;
                /* find . -name "*.[chS]" | xargs grep -i <keyword> */
        }
@@ -4734,8 +4712,6 @@ it:
 * For new features: a description of the feature and your
   implementation.
 
-* A CHANGELOG entry as plaintext (separate from the patch)
-
 * For major contributions, add a MAINTAINERS file with your
   information and associated file and directory references.