xilinx: Move bootmode detection to separate function

[oweals/u-boot.git] / README

diff --git a/README b/README
index 19dae14ac0829a27ffc26c560f880b336c737ff9..083485067654c319b7f7b84227ae23c689467b1d 100644 (file)
--- a/README
+++ b/README
@@ -1632,16 +1632,6 @@ The following options need to be configured:
                  - activate this driver with CONFIG_SYS_I2C_RCAR
                  - This driver adds 4 i2c buses
 
-                 - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0
-                 - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0
-                 - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1
-                 - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1
-                 - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2
-                 - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2
-                 - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3
-                 - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3
-                 - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses
-
                - drivers/i2c/sh_i2c.c:
                  - activate this driver with CONFIG_SYS_I2C_SH
                  - This driver adds from 2 to 5 i2c buses
@@ -3186,16 +3176,6 @@ necessary. For example using the ELDK on a 4xx CPU, please enter:
        $ CROSS_COMPILE=ppc_4xx-
        $ export CROSS_COMPILE
 
-Note: If you wish to generate Windows versions of the utilities in
-      the tools directory you can use the MinGW toolchain
-      (http://www.mingw.org).  Set your HOST tools to the MinGW
-      toolchain and execute 'make tools'.  For example:
-
-       $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
-
-      Binaries such as tools/mkimage.exe will be created which can
-      be executed on computers running Windows.
-
 U-Boot is intended to be simple to build. After installing the
 sources you must configure U-Boot for one specific board type. This
 is done by typing:
@@ -3203,9 +3183,9 @@ is done by typing:
        make NAME_defconfig
 
 where "NAME_defconfig" is the name of one of the existing configu-
-rations; see boards.cfg for supported names.
+rations; see configs/*_defconfig for supported names.
 
-Note: for some board special configuration names may exist; check if
+Note: for some boards special configuration names may exist; check if
       additional information is available from the board vendor; for
       instance, the TQM823L systems are available without (standard)
       or with LCD support. You can select such additional "features"