# SPDX-License-Identifier: GPL-2.0+
VERSION = 2019
-PATCHLEVEL = 07
+PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION = -rc4
+EXTRAVERSION =
NAME =
# *DOCUMENTATION*
# Use 'make C=2' to enable checking of *all* source files, regardless
# of whether they are re-compiled or not.
#
-# See the file "Documentation/sparse.txt" for more details, including
+# See the file "doc/sparse.txt" for more details, including
# where to get the "sparse" utility.
ifeq ("$(origin C)", "command line")
# KBUILD_MODULES := 1
#endif
+# Check ths size of a binary:
+# Args:
+# $1: File to check
+# #2: Size limit in bytes (decimal or 0xhex)
define size_check
actual=$$( wc -c $1 | awk '{print $$1}'); \
limit=$$( printf "%d" $2 ); \
if test $$actual -gt $$limit; then \
echo "$1 exceeds file size limit:" >&2; \
- echo " limit: $$limit bytes" >&2; \
- echo " actual: $$actual bytes" >&2; \
- echo " excess: $$((actual - limit)) bytes" >&2; \
+ echo " limit: $$(printf %#x bytes $$limit) bytes" >&2; \
+ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
+ echo " excess: $$(printf %#x $$((actual - limit))) bytes" >&2;\
exit 1; \
fi
endef
endif
endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
-ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX6)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
-ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
+ifeq ($(CONFIG_MX7)$(CONFIG_IMX_HAB), yy)
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
else
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
endif
-ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
+ifdef CONFIG_INIT_SP_RELATIVE
ALL-y += init_sp_bss_offset_check
endif
ALL-y += u-boot-with-dtb.bin
endif
+ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
+ALL-y += idbloader.img
+endif
+
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
endif
endif
endif
-ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
+ifneq ($(CONFIG_DM),y)
@echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
- @echo >&2 "(possibly in a subsequent patch in your series)"
- @echo >&2 "before sending patches to the mailing list."
+ @echo >&2 "This board does not use CONFIG_DM. CONFIG_DM will be"
+ @echo >&2 "compulsory starting with the v2020.01 release."
+ @echo >&2 "Failure to update may result in board removal."
+ @echo >&2 "See doc/driver-model/migration.rst for more info."
@echo >&2 "===================================================="
endif
ifeq ($(CONFIG_MMC),y)
@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
@echo >&2 "===================================================="
endif
+endif
+ifneq ($(CONFIG_NET),)
+ifneq ($(CONFIG_DM_ETH),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_ETH (Driver Model"
+ @echo >&2 "for Ethernet drivers). Please update the board to use"
+ @echo >&2 "CONFIG_DM_ETH before the v2020.07 release. Failure to"
+ @echo >&2 "update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/migration.rst for more info."
+ @echo >&2 "===================================================="
+endif
endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
fi \
fi
-ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
+ifdef CONFIG_INIT_SP_RELATIVE
ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
else
# ---------------------------------------------------------------------------
# Use 'make BINMAN_DEBUG=1' to enable debugging
quiet_cmd_binman = BINMAN $@
-cmd_binman = $(srctree)/tools/binman/binman -u -d u-boot.dtb -O . -m \
+cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
+ --toolpath $(objtree)/tools \
+ $(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
+ build -u -d u-boot.dtb -O . -m \
-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
- $(if $(BINMAN_DEBUG),-D) $(BINMAN_$(@F)) $<
+ $(BINMAN_$(@F))
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
CONFIG_SYS_UBOOT_START := 0
endif
-# Boards with more complex image requirments can provide an .its source file
+# Boards with more complex image requirements can provide an .its source file
# or a generator script
ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BIN := u-boot-with-dtb.bin
+else
+UBOOT_BIN := u-boot.bin
+endif
+
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
- $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
+ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
+ ,$(UBOOT_BIN)) FORCE
$(call if_changed,mkimage)
$(BOARD_SIZE_CHECK)
MKIMAGEFLAGS_u-boot.itb = -E
endif
-u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
+u-boot.itb: u-boot-nodtb.bin \
+ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_OF_HOSTFILE),dts/dt.dtb) \
+ $(U_BOOT_ITS) FORCE
$(call if_changed,mkfitimage)
$(BOARD_SIZE_CHECK)
u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
+ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
+MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd
+tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
+ $(call if_changed,mkimage)
+idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,cat)
+endif
+
ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+ifeq ($(CONFIG_SPL_LOAD_IMX_CONTAINER), y)
+u-boot.cnt: u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
+flash.bin: spl/u-boot-spl.bin u-boot.cnt FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+else
flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
endif
+endif
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
(grep -v '^#' | \
grep -v '^$$' | \
tr '\n' '\0' | \
- sed -e 's/\\\x0/\n/' | \
+ sed -e 's/\\\x0/\n/g' | \
xxd -i ; echo ", 0x00" ; )
endef
$(call cmd,rmfiles)
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '*.ko.*' -o -name '*.su' \
+ -o -name '*.ko.*' -o -name '*.su' -o -name '*.pyc' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
- -type f -print | xargs rm -f
+ -type f -print | xargs rm -f \
+ bl31.c bl31.elf bl31_*.bin image.map tispl.bin*
# mrproper - Delete all generated files, including .config
#
@echo ' coccicheck - Execute static code analysis with Coccinelle'
@echo ''
@echo 'Documentation targets:'
- @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
+ @$(MAKE) -f $(srctree)/doc/Makefile dochelp
@echo ''
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
@echo ' make V=2 [targets] 2 => give reason for rebuild of target'
linkcheckdocs dochelp refcheckdocs
PHONY += $(DOC_TARGETS)
$(DOC_TARGETS): scripts_basic FORCE
- $(Q)$(MAKE) $(build)=Documentation $@
+ $(Q)$(MAKE) $(build)=doc $@
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
projects / oweals / u-boot.git / blobdiff