dm: arm: imx: cx9020: remove unused mmc functions

[oweals/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 7dc7798df4e104025a653b549b5d7ee996cedd18..91c1082ace226d6ad679fe9bde43fd7024663173 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -86,6 +86,7 @@ config DISTRO_DEFAULTS
        select SUPPORT_RAW_INITRD
        select SYS_LONGHELP
        imply CMD_MII if NET
+       imply USB_STORAGE
        imply USE_BOOTCOMMAND
        help
          Select this to enable various options and commands which are suitable
@@ -104,6 +105,12 @@ config ENV_VARS_UBOOT_CONFIG
          - CONFIG_SYS_VENDOR
          - CONFIG_SYS_SOC
 
+config NR_DRAM_BANKS
+       int "Number of DRAM banks"
+       default 4
+       help
+         This defines the number of DRAM banks.
+
 config SYS_BOOT_GET_CMDLINE
        bool "Enable kernel command line setup"
        help
@@ -119,6 +126,7 @@ config SYS_BOOT_GET_KBD
 config SYS_MALLOC_F
        bool "Enable malloc() pool before relocation"
        default y if DM
+
        help
          Before relocation, memory is very limited on many platforms. Still,
          we can provide a small malloc() pool if needed. Driver model in
@@ -129,6 +137,7 @@ config SYS_MALLOC_F_LEN
        hex "Size of malloc() pool before relocation"
        depends on SYS_MALLOC_F
        default 0x1000 if AM33XX
+       default 0x2800 if SANDBOX
        default 0x400
        help
          Before relocation, memory is very limited on many platforms. Still,
@@ -136,6 +145,13 @@ config SYS_MALLOC_F_LEN
          particular needs this to operate, so that it can allocate the
          initial serial device and any others that are needed.
 
+config SYS_MALLOC_LEN
+       hex "Define memory for Dynamic allocation"
+       depends on ARCH_ZYNQ || ARCH_VERSAL
+       help
+         This defines memory to be allocated for Dynamic allocation
+         TODO: Use for other architectures
+
 config SPL_SYS_MALLOC_F_LEN
        hex "Size of malloc() pool in SPL before relocation"
        depends on SYS_MALLOC_F
@@ -197,7 +213,7 @@ config PHYS_64BIT
        help
          Say Y here to support 64bit physical memory address.
          This can be used not only for 64bit SoCs, but also for
-         large physical address extention on 32bit SoCs.
+         large physical address extension on 32bit SoCs.
 
 config BUILD_ROM
        bool "Build U-Boot as BIOS replacement"
@@ -208,6 +224,32 @@ config BUILD_ROM
          which are not shipped in the U-Boot source tree.
          Please, see doc/README.x86 for details.
 
+config SPL_IMAGE
+       string "SPL image used in the combined SPL+U-Boot image"
+       default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+       default "spl/u-boot-spl.bin"
+       help
+         Select the SPL build target that shall be generated by the SPL
+         build process (default spl/u-boot-spl.bin). This image will be
+         used to generate a combined image with SPL and main U-Boot
+         proper as one single image.
+
+config BUILD_TARGET
+       string "Build target special images"
+       default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
+       default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
+       default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
+       default "u-boot-elf.srec" if RCAR_GEN3
+       default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
+       default "u-boot.kwb" if KIRKWOOD
+       default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+       help
+         Some SoCs need special image types (e.g. U-Boot binary
+         with a special header) as build targets. By defining
+         CONFIG_BUILD_TARGET in the SoC / board header, this
+         special image will be automatically built upon calling
+         make / buildman.
+
 endmenu                # General setup
 
 menu "Boot images"
@@ -235,6 +277,16 @@ config FIT
 
 if FIT
 
+config FIT_EXTERNAL_OFFSET
+       hex "Text Base"
+       default 0x0
+       help
+         This specifies a data offset in fit image.
+         The offset is from data payload offset to the beginning of
+         fit image header. When specifies a offset, specific data
+         could be put in the hole between data payload and fit image
+         header, such as CSF data on i.MX platform.
+
 config FIT_ENABLE_SHA256_SUPPORT
        bool "Support SHA256 checksum of FIT image contents"
        default y
@@ -277,6 +329,14 @@ config FIT_SIGNATURE_MAX_SIZE
          device memory. Assure this size does not extend past expected storage
          space.
 
+config FIT_ENABLE_RSASSA_PSS_SUPPORT
+       bool "Support rsassa-pss signature scheme of FIT image contents"
+       depends on FIT_SIGNATURE
+       default n
+       help
+         Enable this to support the pss padding algorithm as described
+         in the rfc8017 (https://tools.ietf.org/html/rfc8017).
+
 config FIT_VERBOSE
        bool "Show verbose messages when FIT images fail"
        help
@@ -375,6 +435,7 @@ config SPL_FIT_GENERATOR
        string ".its file generator script for U-Boot FIT image"
        depends on SPL_FIT
        default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+       default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
        help
          Specifies a (platform specific) script file to generate the FIT
          source file used to build the U-Boot FIT image file. This gets
@@ -440,7 +501,7 @@ config SYS_EXTRA_OPTIONS
 config SYS_TEXT_BASE
        depends on !NIOS2 && !XTENSA
        depends on !EFI_APP
-       default 0x80800000 if ARCH_OMAP2PLUS
+       default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
        default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
        default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
        default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S