imx: mx6ul_14x14_evk: configure for 24bpp display

[oweals/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 1f0904f7045e965a6c3e26f6f2e465dc3d39c06c..66148ce477908e3129c9e3b3804c7fb7fbc1855b 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -88,6 +88,7 @@ config DISTRO_DEFAULTS
        select CMD_PART if PARTITIONS
        select CMD_PING if CMD_NET
        select CMD_PXE if NET
+       select CMD_SYSBOOT
        select ENV_VARS_UBOOT_CONFIG
        select HUSH_PARSER
        select SUPPORT_RAW_INITRD
@@ -146,7 +147,9 @@ config SYS_MALLOC_F_LEN
        default 0x1000 if AM33XX
        default 0x2800 if SANDBOX
        default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
-                          ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
+                          ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \
+                          ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \
+                          ARCH_LS1046A)
        default 0x400
        help
          Before relocation, memory is very limited on many platforms. Still,
@@ -252,10 +255,11 @@ config BUILD_TARGET
        default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
        default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
        default "u-boot-elf.srec" if RCAR_GEN3
-       default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
-                               ARCH_SUNXI || RISCV)
+       default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+                               ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
        default "u-boot.kwb" if KIRKWOOD
        default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+       default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
        help
          Some SoCs need special image types (e.g. U-Boot binary
          with a special header) as build targets. By defining
@@ -280,6 +284,20 @@ config SYS_LDSCRIPT
          Path within the source tree to the linker script to use for the
          main U-Boot binary.
 
+config ERR_PTR_OFFSET
+       hex
+       default 0x0
+       help
+         Some U-Boot pointers have redundant information, so we can use a
+         scheme where we can return either an error code or a pointer with the
+         same return value. The default implementation just casts the pointer
+         to a number, however, this may fail on platforms where the end of the
+         address range is used for valid pointers (e.g. 0xffffff00 is a valid
+         heap pointer in socfpga SPL).
+         For such platforms, this value provides an upper range of those error
+         pointer values - up to 'MAX_ERRNO' bytes below this value must be
+         unused/invalid addresses.
+
 endmenu                # General setup
 
 menu "Boot images"
@@ -367,6 +385,14 @@ config FIT_ENABLE_RSASSA_PSS_SUPPORT
          Enable this to support the pss padding algorithm as described
          in the rfc8017 (https://tools.ietf.org/html/rfc8017).
 
+config FIT_CIPHER
+       bool "Enable ciphering data in a FIT uImages"
+       depends on DM
+       select AES
+       help
+         Enable the feature of data ciphering/unciphering in the tool mkimage
+         and in the u-boot support of the FIT image.
+
 config FIT_VERBOSE
        bool "Show verbose messages when FIT images fail"
        help
@@ -428,6 +454,24 @@ config SPL_LOAD_FIT
          particular it can handle selecting from multiple device tree
          and passing the correct one to U-Boot.
 
+config SPL_LOAD_FIT_APPLY_OVERLAY
+       bool "Enable SPL applying DT overlays from FIT"
+       depends on SPL_LOAD_FIT
+       select OF_LIBFDT_OVERLAY
+       help
+         The device tree is loaded from the FIT image. Allow the SPL is to
+         also load device-tree overlays from the FIT image an apply them
+         over the device tree.
+
+config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ
+       depends on SPL_LOAD_FIT_APPLY_OVERLAY
+       default 0x10000
+       hex "size of temporary buffer used to load the overlays"
+       help
+         The size of the area where the overlays will be loaded and
+         uncompress. Must be at least as large as biggest overlay
+         (uncompressed)
+
 config SPL_LOAD_FIT_FULL
        bool "Enable SPL loading U-Boot as a FIT (full fitImage features)"
        select SPL_FIT
@@ -466,6 +510,7 @@ config SPL_FIT_GENERATOR
        depends on SPL_FIT
        default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
        default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+       default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
        default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
        help
          Specifies a (platform specific) script file to generate the FIT
@@ -529,9 +574,14 @@ config SYS_EXTRA_OPTIONS
          configuration to Kconfig. Since this option will be removed sometime,
          new boards should not use this option.
 
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+       bool
        depends on !NIOS2 && !XTENSA
        depends on !EFI_APP
+       default y
+
+config SYS_TEXT_BASE
+       depends on HAVE_SYS_TEXT_BASE
        default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
        default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
        default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
@@ -540,8 +590,6 @@ config SYS_TEXT_BASE
        help
          The address in memory that U-Boot will be running from, initially.
 
-
-
 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI || MPC83xx
        int "CPU clock frequency"