/dts-v1/; /* * (Bogus) example FIT image description file demonstrating the usage * of multiple images loaded by the SPL. * Several binaries will be loaded at their respective load addresses. * * For booting U-Boot, "firmware" is searched first. If not found, "loadables" * is used to identify images to be loaded into memory. If falcon boot is * enabled, "kernel" is searched first. If not found, it falls back to the * same flow as booting U-Boot. Changing image type will result skipping * specific image. * * Finally the one image specifying an entry point will be entered by the SPL. */ / { description = "multiple firmware blobs and U-Boot, loaded by SPL"; #address-cells = <0x1>; images { uboot { description = "U-Boot (64-bit)"; type = "standalone"; arch = "arm64"; compression = "none"; load = <0x4a000000>; }; atf { description = "ARM Trusted Firmware"; type = "firmware"; arch = "arm64"; compression = "none"; load = <0x18000>; entry = <0x18000>; }; mgmt-firmware { description = "arisc management processor firmware"; type = "firmware"; arch = "or1k"; compression = "none"; load = <0x40000>; }; fdt-1 { description = "Pine64+ DT"; type = "flat_dt"; compression = "none"; load = <0x4fa00000>; arch = "arm64"; }; fdt-2 { description = "Pine64 DT"; type = "flat_dt"; compression = "none"; load = <0x4fa00000>; arch = "arm64"; }; kernel { description = "4.7-rc5 kernel"; type = "kernel"; compression = "none"; load = <0x40080000>; arch = "arm64"; }; initrd { description = "Debian installer initrd"; type = "ramdisk"; compression = "none"; load = <0x4fe00000>; arch = "arm64"; }; }; configurations { default = "config-1"; config-1 { description = "sun50i-a64-pine64-plus"; loadables = "uboot", "atf", "kernel", "initrd"; fdt = "fdt-1"; }; config-2 { description = "sun50i-a64-pine64"; loadables = "uboot", "atf", "mgmt-firmware"; fdt = "fdt-2"; }; }; };