# SPDX-License-Identifier: GPL-2.0+ # # Copyright (C) 2015, Bin Meng if VENDOR_INTEL choice prompt "Mainboard model" optional config TARGET_BAYLEYBAY bool "Bayley Bay" help This is the Intel Bayley Bay Customer Reference Board. It contains an Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC, PCIe and some other sensor interfaces. config TARGET_CHERRYHILL bool "Cherry Hill" help This is the Intel Cherry Hill Customer Reference Board. It is in a mini-ITX form factor containing the Intel Braswell SoC, which has a 64-bit quad-core, single-thread, Intel Atom processor, along with serial console, 10/100/1000 Ethernet, SD-Card, USB 2/3, SATA, PCIe, some GPIOs, one HDMI and two DP video out. config TARGET_COUGARCANYON2 bool "Cougar Canyon 2" help This is the Intel Cougar Canyon 2 Customer Reference Board. It is built on the Chief River platform with Intel Ivybridge Processor and Panther Point chipset. The board has 4GB RAM, with some other peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI. config TARGET_CROWNBAY bool "Crown Bay" help This is the Intel Crown Bay Customer Reference Board. It contains the Intel Atom Processor E6xx populated on the COM Express module with 1GB DDR2 soldered down memory and a carrier board with the Intel Platform Controller Hub EG20T, other system components and peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. config TARGET_EDISON bool "Edison" help This is the Intel Edison Compute Module. It contains a dual core Intel Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers. config TARGET_GALILEO bool "Galileo" help This is the Intel Galileo board, which is the first in a family of Arduino-certified development and prototyping boards based on Intel architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit single-core, single-thread, Intel Pentium processor instrunction set architecture (ISA) compatible, operating at speeds up to 400Mhz, along with 256MB DDR3 memory. It supports a wide range of industry standard I/O interfaces, including a full-sized mini-PCIe slot, one 100Mb Ethernet port, a microSD card slot, a USB host port and a USB client port. config TARGET_MINNOWMAX bool "Minnowboard MAX" help This is the Intel Minnowboard MAX. It contains an Atom E3800 processor in a small form factor with Ethernet, micro-SD, USB 2, USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out. It requires some binary blobs - see README.x86 for details. Note that PCIE_ECAM_BASE is set up by the FSP so the value used by U-Boot matches that value. config TARGET_SLIMBOOTLOADER bool "slimbootloader" help This target is used for running U-Boot on top of Slim Bootloader boot firmware as a payload. Slim Bootloader does memory initialization and silicon initialization, and it passes necessary information in HOB (Hand Off Block) to a payload. The payload consumes HOB data which is generated by Slim Bootloader for its driver initialization. Slim Bootloader consumes FSP and its HOB, but FSP HOB is cleared Before launching a payload. Instead, Slim Bootloader generates its HOB data such as memory info, serial port info and so on. Refer to doc/board/intel/slimbootloader.rst for the details. endchoice source "board/intel/bayleybay/Kconfig" source "board/intel/cherryhill/Kconfig" source "board/intel/cougarcanyon2/Kconfig" source "board/intel/crownbay/Kconfig" source "board/intel/edison/Kconfig" source "board/intel/galileo/Kconfig" source "board/intel/minnowmax/Kconfig" source "board/intel/slimbootloader/Kconfig" endif