cm_fx6: fix video stdout in default environment
[oweals/u-boot.git] / include / configs / apalis_imx6.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2013-2019 Toradex, Inc.
4  *
5  * Configuration settings for the Toradex Apalis iMX6
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <linux/stringify.h>
12
13 #include "mx6_common.h"
14
15 #undef CONFIG_DISPLAY_BOARDINFO
16
17 #define CONFIG_MACH_TYPE                4886
18
19 #include <asm/arch/imx-regs.h>
20 #include <asm/mach-imx/gpio.h>
21
22 #ifdef CONFIG_SPL
23 #include "imx6_spl.h"
24 #endif
25
26 #define CONFIG_CMDLINE_TAG
27 #define CONFIG_SETUP_MEMORY_TAGS
28 #define CONFIG_INITRD_TAG
29 #define CONFIG_REVISION_TAG
30 #define CONFIG_SERIAL_TAG
31
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
34
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE            UART1_BASE
37
38 /* I2C Configs */
39 #define CONFIG_SYS_I2C_MXC
40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
43 #define CONFIG_SYS_I2C_SPEED            100000
44 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
45
46 /* MMC Configs */
47 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
48 #define CONFIG_SYS_FSL_USDHC_NUM        3
49
50 /*
51  * SATA Configs
52  */
53 #ifdef CONFIG_CMD_SATA
54 #define CONFIG_LBA48
55 #endif
56
57 /* Network */
58 #define PHY_ANEG_TIMEOUT                15000 /* PHY needs longer aneg time */
59
60 /* USB Configs */
61 /* Host */
62 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
63 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
64 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
65 #define CONFIG_MXC_USB_FLAGS            0
66 /* Client */
67 #define CONFIG_USBD_HS
68
69 /* Framebuffer and LCD */
70 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
71 #define CONFIG_VIDEO_BMP_RLE8
72 #define CONFIG_SPLASH_SCREEN
73 #define CONFIG_SPLASH_SCREEN_ALIGN
74 #define CONFIG_BMP_16BPP
75 #define CONFIG_VIDEO_LOGO
76 #define CONFIG_VIDEO_BMP_LOGO
77 #define CONFIG_CONSOLE_MUX
78 #define CONFIG_IMX_HDMI
79 #define CONFIG_IMX_VIDEO_SKIP
80
81 /* allow to overwrite serial and ethaddr */
82 #define CONFIG_ENV_OVERWRITE
83
84 /* Command definition */
85
86 #undef CONFIG_IPADDR
87 #define CONFIG_IPADDR                   192.168.10.2
88 #define CONFIG_NETMASK                  255.255.255.0
89 #undef CONFIG_SERVERIP
90 #define CONFIG_SERVERIP                 192.168.10.1
91
92 #define CONFIG_LOADADDR                 0x12000000
93
94 #ifndef CONFIG_SPL_BUILD
95 #define BOOT_TARGET_DEVICES(func) \
96         func(MMC, mmc, 0) \
97         func(MMC, mmc, 1) \
98         func(MMC, mmc, 2) \
99         func(USB, usb, 0) \
100         func(DHCP, dhcp, na)
101 #include <config_distro_bootcmd.h>
102 #undef BOOTENV_RUN_NET_USB_START
103 #define BOOTENV_RUN_NET_USB_START ""
104 #else /* CONFIG_SPL_BUILD */
105 #define BOOTENV
106 #endif /* CONFIG_SPL_BUILD */
107
108 #define DFU_ALT_EMMC_INFO \
109         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
110         "boot part 0 1;" \
111         "rootfs part 0 2;" \
112         "zImage fat 0 1;" \
113         "imx6q-apalis-eval.dtb fat 0 1;" \
114         "imx6q-apalis-cam-eval.dtb fat 0 1"
115
116 #define UBOOT_UPDATE \
117         "uboot_hwpart=1\0" \
118         "uboot_blk=8a\0" \
119         "uboot_spl_blk=2\0" \
120         "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
121                 "setexpr blkcnt ${blkcnt} / 0x200\0" \
122         "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
123                 "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
124         "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
125                 "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
126
127 #define EMMC_BOOTCMD \
128         "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
129                 "ro,noatime rootfstype=ext4 rootwait\0" \
130         "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
131                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
132                 "${vidargs}; echo Booting from internal eMMC chip...; " \
133                 "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
134                 "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
135                 "bootz ${kernel_addr_r} ${dtbparam}\0" \
136         "emmcbootpart=1\0" \
137         "emmcdev=0\0" \
138         "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
139                 "${fdt_addr_r} ${fdt_file} && " \
140                 "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
141         "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
142         "emmcrootpart=2\0"
143
144 #define MEM_LAYOUT_ENV_SETTINGS \
145         "bootm_size=0x20000000\0" \
146         "fdt_addr_r=0x12100000\0" \
147         "kernel_addr_r=0x11000000\0" \
148         "pxefile_addr_r=0x17100000\0" \
149         "ramdisk_addr_r=0x12200000\0" \
150         "scriptaddr=0x17000000\0"
151
152 #define NFS_BOOTCMD \
153         "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \
154         "nfsboot=run setup; " \
155                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
156                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
157                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
158                 "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
159         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
160                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
161
162 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
163 #define FDT_FILE "imx6q-apalis-eval.dtb"
164 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
165 #else
166 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
167 #endif
168 #define CONFIG_EXTRA_ENV_SETTINGS \
169         BOOTENV \
170         "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
171                 "usb start ; " \
172                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
173         "boot_file=zImage\0" \
174         "console=ttymxc0\0" \
175         "defargs=enable_wait_mode=off vmalloc=400M\0" \
176         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
177         EMMC_BOOTCMD \
178         "fdt_file=" FDT_FILE "\0" \
179         "fdt_fixup=;\0" \
180         MEM_LAYOUT_ENV_SETTINGS \
181         NFS_BOOTCMD \
182         UBOOT_UPDATE \
183         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
184                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
185                 "flash_eth.img && source ${loadaddr}\0" \
186         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
187                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
188                 "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
189                 " ${loadaddr} flash_blk.img && " \
190                 "source ${loadaddr}\0" \
191         "setup=setenv setupargs fec_mac=${ethaddr} " \
192                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
193                 "console=${console},${baudrate}n8\0 " \
194         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
195         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
196                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
197                 "source ${loadaddr}\0" \
198         "splashpos=m,m\0" \
199         "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
200         "vidargs=mxc_hdmi.only_cea=1 " \
201                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
202                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
203                 "fbmem=32M\0 "
204
205 /* Miscellaneous configurable options */
206 #undef CONFIG_SYS_CBSIZE
207 #define CONFIG_SYS_CBSIZE               1024
208 #undef CONFIG_SYS_MAXARGS
209 #define CONFIG_SYS_MAXARGS              48
210
211 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
212
213 /* Physical Memory Map */
214 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
215
216 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
217 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
218 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
219
220 #define CONFIG_SYS_INIT_SP_OFFSET \
221         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
222 #define CONFIG_SYS_INIT_SP_ADDR \
223         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
224
225 /* environment organization */
226
227 #if defined(CONFIG_ENV_IS_IN_MMC)
228 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
229 #define CONFIG_SYS_MMC_ENV_DEV          0
230 #define CONFIG_SYS_MMC_ENV_PART         1
231 #endif
232
233 #endif  /* __CONFIG_H */