configs/pcm052_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_THUMB_BUILD=y
   3 CONFIG_ARCH_VF610=y
   4 CONFIG_SYS_TEXT_BASE=0x3f401000
   5 CONFIG_ENV_SIZE=0x2000
   6 CONFIG_ENV_OFFSET=0xA0000
   7 CONFIG_DM_GPIO=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_ENV_OFFSET_REDUND=0xC0000
  10 CONFIG_TARGET_PCM052=y
  11 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
  12 CONFIG_BOOTDELAY=3
  13 CONFIG_BOARD_EARLY_INIT_F=y
  14 CONFIG_HUSH_PARSER=y
  15 CONFIG_CMD_BOOTZ=y
  16 CONFIG_CMD_MEMTEST=y
  17 CONFIG_SYS_MEMTEST_START=0x80010000
  18 CONFIG_SYS_MEMTEST_END=0x87c00000
  19 CONFIG_CMD_GPIO=y
  20 CONFIG_CMD_I2C=y
  21 CONFIG_CMD_MMC=y
  22 CONFIG_CMD_NAND_TRIMFFS=y
  23 CONFIG_CMD_DHCP=y
  24 CONFIG_CMD_MII=y
  25 CONFIG_CMD_PING=y
  26 CONFIG_CMD_FAT=y
  27 CONFIG_MTDIDS_DEFAULT="nand0=NAND"
  28 CONFIG_MTDPARTS_DEFAULT="mtdparts=NAND:640k(bootloader),128k(env1),128k(env2),128k(dtb),6144k(kernel),-(root)"
  29 CONFIG_CMD_UBI=y
  30 CONFIG_OF_CONTROL=y
  31 CONFIG_DEFAULT_DEVICE_TREE="vf610-pcm052"
  32 CONFIG_ENV_IS_IN_NAND=y
  33 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  34 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  35 CONFIG_DM=y
  36 CONFIG_VYBRID_GPIO=y
  37 CONFIG_DM_I2C=y
  38 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  39 CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
  40 CONFIG_SYS_I2C_MXC=y
  41 CONFIG_MISC=y
  42 CONFIG_I2C_EEPROM=y
  43 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
  44 CONFIG_SYS_I2C_EEPROM_BUS=2
  45 CONFIG_SYS_EEPROM_SIZE=32768
  46 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
  47 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
  48 CONFIG_DM_MMC=y
  49 CONFIG_FSL_ESDHC_IMX=y
  50 CONFIG_MTD=y
  51 CONFIG_DM_MTD=y
  52 CONFIG_NAND_VF610_NFC=y
  53 CONFIG_NAND_VF610_NFC_DT=y
  54 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
  55 CONFIG_DM_SPI_FLASH=y
  56 CONFIG_SPI_FLASH_STMICRO=y
  57 CONFIG_SPI_FLASH_MTD=y
  58 CONFIG_PHYLIB=y
  59 CONFIG_PHY_MICREL=y
  60 CONFIG_PHY_MICREL_KSZ8XXX=y
  61 CONFIG_DM_ETH=y
  62 CONFIG_FEC_MXC=y
  63 CONFIG_MII=y
  64 CONFIG_PINCTRL=y
  65 CONFIG_PINCTRL_VYBRID=y
  66 CONFIG_DM_RTC=y
  67 CONFIG_RTC_M41T62=y
  68 CONFIG_DM_SERIAL=y
  69 CONFIG_FSL_LPUART=y
  70 CONFIG_SPI=y
  71 CONFIG_DM_SPI=y
  72 CONFIG_FSL_QSPI=y
  73 # CONFIG_EFI_LOADER is not set