configs/ls1046ardb_qspi_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1046ARDB=y
   3 CONFIG_SYS_TEXT_BASE=0x40100000
   4 CONFIG_ENV_SIZE=0x2000
   5 CONFIG_ENV_SECT_SIZE=0x40000
   6 CONFIG_ENV_OFFSET=0x300000
   7 CONFIG_FSL_LS_PPA=y
   8 CONFIG_QSPI_AHB_INIT=y
   9 CONFIG_NR_DRAM_BANKS=2
  10 CONFIG_AHCI=y
  11 CONFIG_DISTRO_DEFAULTS=y
  12 CONFIG_FIT_VERBOSE=y
  13 CONFIG_OF_BOARD_SETUP=y
  14 CONFIG_QSPI_BOOT=y
  15 CONFIG_BOOTDELAY=10
  16 CONFIG_USE_BOOTARGS=y
  17 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  18 CONFIG_MISC_INIT_R=y
  19 CONFIG_CMD_DM=y
  20 CONFIG_CMD_GPT=y
  21 CONFIG_CMD_I2C=y
  22 CONFIG_CMD_MMC=y
  23 CONFIG_CMD_NAND=y
  24 CONFIG_CMD_PCI=y
  25 CONFIG_CMD_USB=y
  26 CONFIG_CMD_CACHE=y
  27 CONFIG_MP=y
  28 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  29 CONFIG_OF_CONTROL=y
  30 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
  31 CONFIG_ENV_IS_IN_SPI_FLASH=y
  32 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  33 CONFIG_DM=y
  34 CONFIG_SATA_CEVA=y
  35 CONFIG_FSL_CAAM=y
  36 CONFIG_DM_MMC=y
  37 CONFIG_FSL_ESDHC=y
  38 CONFIG_MTD=y
  39 CONFIG_MTD_RAW_NAND=y
  40 # CONFIG_SPI_FLASH_BAR is not set
  41 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  42 CONFIG_PHYLIB=y
  43 CONFIG_PHY_AQUANTIA=y
  44 CONFIG_DM_ETH=y
  45 CONFIG_DM_MDIO=y
  46 CONFIG_E1000=y
  47 CONFIG_FMAN_ENET=y
  48 CONFIG_PCI=y
  49 CONFIG_DM_PCI=y
  50 CONFIG_DM_PCI_COMPAT=y
  51 CONFIG_PCIE_LAYERSCAPE=y
  52 CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
  53 CONFIG_DM_SCSI=y
  54 CONFIG_SYS_NS16550=y
  55 CONFIG_SPI=y
  56 CONFIG_DM_SPI=y
  57 CONFIG_FSL_QSPI=y
  58 CONFIG_USB=y
  59 CONFIG_DM_USB=y
  60 CONFIG_USB_XHCI_HCD=y
  61 CONFIG_USB_XHCI_DWC3=y
  62 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
  63 CONFIG_DM_I2C=y
  64 CONFIG_DM_GPIO=y