configs/at91sam9x5ek_spiflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0x26f00000
   4 CONFIG_TARGET_AT91SAM9X5EK=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x2000
   6 CONFIG_ENV_SIZE=0x3000
   7 CONFIG_ENV_OFFSET=0x5000
   8 CONFIG_ENV_SECT_SIZE=0x1000
   9 CONFIG_DM_GPIO=y
  10 CONFIG_NR_DRAM_BANKS=1
  11 CONFIG_DEBUG_UART_BOARD_INIT=y
  12 CONFIG_DEBUG_UART_BASE=0xfffff200
  13 CONFIG_DEBUG_UART_CLOCK=132000000
  14 CONFIG_DEBUG_UART=y
  15 CONFIG_FIT=y
  16 CONFIG_SPI_BOOT=y
  17 CONFIG_BOOTDELAY=3
  18 CONFIG_USE_BOOTARGS=y
  19 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs rw"
  20 # CONFIG_CONSOLE_MUX is not set
  21 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  22 # CONFIG_DISPLAY_BOARDINFO is not set
  23 CONFIG_HUSH_PARSER=y
  24 CONFIG_SYS_PROMPT="U-Boot> "
  25 CONFIG_CMD_BOOTZ=y
  26 # CONFIG_CMD_FLASH is not set
  27 CONFIG_CMD_MMC=y
  28 CONFIG_CMD_NAND=y
  29 CONFIG_CMD_NAND_TRIMFFS=y
  30 CONFIG_CMD_USB=y
  31 # CONFIG_CMD_SETEXPR is not set
  32 CONFIG_CMD_DHCP=y
  33 CONFIG_CMD_PING=y
  34 CONFIG_CMD_FAT=y
  35 CONFIG_CMD_MTDPARTS=y
  36 CONFIG_CMD_UBI=y
  37 CONFIG_OF_CONTROL=y
  38 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
  39 CONFIG_ENV_IS_IN_SPI_FLASH=y
  40 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  41 CONFIG_DM=y
  42 CONFIG_CLK=y
  43 CONFIG_CLK_AT91=y
  44 CONFIG_AT91_GPIO=y
  45 CONFIG_DM_MMC=y
  46 CONFIG_GENERIC_ATMEL_MCI=y
  47 CONFIG_MTD=y
  48 CONFIG_MTD_RAW_NAND=y
  49 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  50 CONFIG_NAND_ATMEL=y
  51 CONFIG_DM_SPI_FLASH=y
  52 CONFIG_SF_DEFAULT_SPEED=30000000
  53 CONFIG_SPI_FLASH_ATMEL=y
  54 CONFIG_DM_ETH=y
  55 CONFIG_MACB=y
  56 CONFIG_PINCTRL=y
  57 CONFIG_PINCTRL_AT91=y
  58 CONFIG_DM_SERIAL=y
  59 CONFIG_DEBUG_UART_ANNOUNCE=y
  60 CONFIG_ATMEL_USART=y
  61 CONFIG_SPI=y
  62 CONFIG_DM_SPI=y
  63 CONFIG_TIMER=y
  64 CONFIG_ATMEL_PIT_TIMER=y
  65 CONFIG_USB=y
  66 CONFIG_DM_USB=y
  67 CONFIG_USB_EHCI_HCD=y
  68 CONFIG_USB_STORAGE=y
  69 CONFIG_DM_VIDEO=y
  70 # CONFIG_VIDEO_BPP8 is not set
  71 # CONFIG_VIDEO_BPP32 is not set
  72 CONFIG_ATMEL_HLCD=y