arch/arm/dts/rk3399-rockpro64.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  */
   6
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         chosen {
  14                 stdout-path = "serial2:1500000n8";
  15         };
  16
  17         clkin_gmac: external-gmac-clock {
  18                 compatible = "fixed-clock";
  19                 clock-frequency = <125000000>;
  20                 clock-output-names = "clkin_gmac";
  21                 #clock-cells = <0>;
  22         };
  23
  24         gpio-keys {
  25                 compatible = "gpio-keys";
  26                 autorepeat;
  27                 pinctrl-names = "default";
  28                 pinctrl-0 = <&pwrbtn>;
  29
  30                 power {
  31                         debounce-interval = <100>;
  32                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  33                         label = "GPIO Key Power";
  34                         linux,code = <KEY_POWER>;
  35                         wakeup-source;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
  43
  44                 work-led {
  45                         label = "work";
  46                         default-state = "on";
  47                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 diy-led {
  51                         label = "diy";
  52                         default-state = "off";
  53                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  54                 };
  55         };
  56
  57         fan: pwm-fan {
  58                 compatible = "pwm-fan";
  59                 #cooling-cells = <2>;
  60                 fan-supply = <&vcc12v_dcin>;
  61                 pwms = <&pwm1 0 50000 0>;
  62         };
  63
  64         sdio_pwrseq: sdio-pwrseq {
  65                 compatible = "mmc-pwrseq-simple";
  66                 clocks = <&rk808 1>;
  67                 clock-names = "ext_clock";
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&wifi_enable_h>;
  70                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  71         };
  72
  73         sound {
  74                 compatible = "audio-graph-card";
  75                 label = "rockchip,rk3399";
  76                 dais = <&i2s1_p0>;
  77         };
  78
  79         vcc12v_dcin: vcc12v-dcin {
  80                 compatible = "regulator-fixed";
  81                 regulator-name = "vcc12v_dcin";
  82                 regulator-always-on;
  83                 regulator-boot-on;
  84                 regulator-min-microvolt = <12000000>;
  85                 regulator-max-microvolt = <12000000>;
  86         };
  87
  88         /* switched by pmic_sleep */
  89         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
  90                 compatible = "regulator-fixed";
  91                 regulator-name = "vcc1v8_s3";
  92                 regulator-always-on;
  93                 regulator-boot-on;
  94                 regulator-min-microvolt = <1800000>;
  95                 regulator-max-microvolt = <1800000>;
  96                 vin-supply = <&vcc_1v8>;
  97         };
  98
  99         vcc3v3_pcie: vcc3v3-pcie-regulator {
 100                 compatible = "regulator-fixed";
 101                 enable-active-high;
 102                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 103                 pinctrl-names = "default";
 104                 pinctrl-0 = <&pcie_pwr_en>;
 105                 regulator-name = "vcc3v3_pcie";
 106                 regulator-always-on;
 107                 regulator-boot-on;
 108                 vin-supply = <&vcc12v_dcin>;
 109         };
 110
 111         vcc3v3_sys: vcc3v3-sys {
 112                 compatible = "regulator-fixed";
 113                 regulator-name = "vcc3v3_sys";
 114                 regulator-always-on;
 115                 regulator-boot-on;
 116                 regulator-min-microvolt = <3300000>;
 117                 regulator-max-microvolt = <3300000>;
 118                 vin-supply = <&vcc5v0_sys>;
 119         };
 120
 121         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 122         vcc5v0_host: vcc5v0-host-regulator {
 123                 compatible = "regulator-fixed";
 124                 enable-active-high;
 125                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 126                 pinctrl-names = "default";
 127                 pinctrl-0 = <&vcc5v0_host_en>;
 128                 regulator-name = "vcc5v0_host";
 129                 regulator-always-on;
 130                 vin-supply = <&vcc5v0_usb>;
 131         };
 132
 133         vcc5v0_typec: vcc5v0-typec-regulator {
 134                 compatible = "regulator-fixed";
 135                 enable-active-high;
 136                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 137                 pinctrl-names = "default";
 138                 pinctrl-0 = <&vcc5v0_typec_en>;
 139                 regulator-name = "vcc5v0_typec";
 140                 regulator-always-on;
 141                 vin-supply = <&vcc5v0_usb>;
 142         };
 143
 144         vcc5v0_sys: vcc5v0-sys {
 145                 compatible = "regulator-fixed";
 146                 regulator-name = "vcc5v0_sys";
 147                 regulator-always-on;
 148                 regulator-boot-on;
 149                 regulator-min-microvolt = <5000000>;
 150                 regulator-max-microvolt = <5000000>;
 151                 vin-supply = <&vcc12v_dcin>;
 152         };
 153
 154         vcc5v0_usb: vcc5v0-usb {
 155                 compatible = "regulator-fixed";
 156                 regulator-name = "vcc5v0_usb";
 157                 regulator-always-on;
 158                 regulator-boot-on;
 159                 regulator-min-microvolt = <5000000>;
 160                 regulator-max-microvolt = <5000000>;
 161                 vin-supply = <&vcc12v_dcin>;
 162         };
 163
 164         vdd_log: vdd-log {
 165                 compatible = "pwm-regulator";
 166                 pwms = <&pwm2 0 25000 1>;
 167                 regulator-name = "vdd_log";
 168                 regulator-always-on;
 169                 regulator-boot-on;
 170                 regulator-min-microvolt = <800000>;
 171                 regulator-max-microvolt = <1700000>;
 172                 vin-supply = <&vcc5v0_sys>;
 173         };
 174 };
 175
 176 &cpu_l0 {
 177         cpu-supply = <&vdd_cpu_l>;
 178 };
 179
 180 &cpu_l1 {
 181         cpu-supply = <&vdd_cpu_l>;
 182 };
 183
 184 &cpu_l2 {
 185         cpu-supply = <&vdd_cpu_l>;
 186 };
 187
 188 &cpu_l3 {
 189         cpu-supply = <&vdd_cpu_l>;
 190 };
 191
 192 &cpu_b0 {
 193         cpu-supply = <&vdd_cpu_b>;
 194 };
 195
 196 &cpu_b1 {
 197         cpu-supply = <&vdd_cpu_b>;
 198 };
 199
 200 &emmc_phy {
 201         status = "okay";
 202 };
 203
 204 &gmac {
 205         assigned-clocks = <&cru SCLK_RMII_SRC>;
 206         assigned-clock-parents = <&clkin_gmac>;
 207         clock_in_out = "input";
 208         phy-supply = <&vcc_lan>;
 209         phy-mode = "rgmii";
 210         pinctrl-names = "default";
 211         pinctrl-0 = <&rgmii_pins>;
 212         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 213         snps,reset-active-low;
 214         snps,reset-delays-us = <0 10000 50000>;
 215         tx_delay = <0x28>;
 216         rx_delay = <0x11>;
 217         status = "okay";
 218 };
 219
 220 &hdmi {
 221         ddc-i2c-bus = <&i2c3>;
 222         pinctrl-names = "default";
 223         pinctrl-0 = <&hdmi_cec>;
 224         status = "okay";
 225 };
 226
 227 &hdmi_sound {
 228         status = "okay";
 229 };
 230
 231 &gpu {
 232         mali-supply = <&vdd_gpu>;
 233         status = "okay";
 234 };
 235
 236 &i2c0 {
 237         clock-frequency = <400000>;
 238         i2c-scl-rising-time-ns = <168>;
 239         i2c-scl-falling-time-ns = <4>;
 240         status = "okay";
 241
 242         rk808: pmic@1b {
 243                 compatible = "rockchip,rk808";
 244                 reg = <0x1b>;
 245                 interrupt-parent = <&gpio3>;
 246                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 247                 #clock-cells = <1>;
 248                 clock-output-names = "xin32k", "rk808-clkout2";
 249                 pinctrl-names = "default";
 250                 pinctrl-0 = <&pmic_int_l>;
 251                 rockchip,system-power-controller;
 252                 wakeup-source;
 253
 254                 vcc1-supply = <&vcc5v0_sys>;
 255                 vcc2-supply = <&vcc5v0_sys>;
 256                 vcc3-supply = <&vcc5v0_sys>;
 257                 vcc4-supply = <&vcc5v0_sys>;
 258                 vcc6-supply = <&vcc5v0_sys>;
 259                 vcc7-supply = <&vcc5v0_sys>;
 260                 vcc8-supply = <&vcc3v3_sys>;
 261                 vcc9-supply = <&vcc5v0_sys>;
 262                 vcc10-supply = <&vcc5v0_sys>;
 263                 vcc11-supply = <&vcc5v0_sys>;
 264                 vcc12-supply = <&vcc3v3_sys>;
 265                 vddio-supply = <&vcca_1v8>;
 266
 267                 regulators {
 268                         vdd_center: DCDC_REG1 {
 269                                 regulator-name = "vdd_center";
 270                                 regulator-always-on;
 271                                 regulator-boot-on;
 272                                 regulator-min-microvolt = <750000>;
 273                                 regulator-max-microvolt = <1350000>;
 274                                 regulator-ramp-delay = <6001>;
 275                                 regulator-state-mem {
 276                                         regulator-off-in-suspend;
 277                                 };
 278                         };
 279
 280                         vdd_cpu_l: DCDC_REG2 {
 281                                 regulator-name = "vdd_cpu_l";
 282                                 regulator-always-on;
 283                                 regulator-boot-on;
 284                                 regulator-min-microvolt = <750000>;
 285                                 regulator-max-microvolt = <1350000>;
 286                                 regulator-ramp-delay = <6001>;
 287                                 regulator-state-mem {
 288                                         regulator-off-in-suspend;
 289                                 };
 290                         };
 291
 292                         vcc_ddr: DCDC_REG3 {
 293                                 regulator-name = "vcc_ddr";
 294                                 regulator-always-on;
 295                                 regulator-boot-on;
 296                                 regulator-state-mem {
 297                                         regulator-on-in-suspend;
 298                                 };
 299                         };
 300
 301                         vcc_1v8: DCDC_REG4 {
 302                                 regulator-name = "vcc_1v8";
 303                                 regulator-always-on;
 304                                 regulator-boot-on;
 305                                 regulator-min-microvolt = <1800000>;
 306                                 regulator-max-microvolt = <1800000>;
 307                                 regulator-state-mem {
 308                                         regulator-on-in-suspend;
 309                                         regulator-suspend-microvolt = <1800000>;
 310                                 };
 311                         };
 312
 313                         vcc1v8_dvp: LDO_REG1 {
 314                                 regulator-name = "vcc1v8_dvp";
 315                                 regulator-always-on;
 316                                 regulator-boot-on;
 317                                 regulator-min-microvolt = <1800000>;
 318                                 regulator-max-microvolt = <1800000>;
 319                                 regulator-state-mem {
 320                                         regulator-off-in-suspend;
 321                                 };
 322                         };
 323
 324                         vcc3v0_touch: LDO_REG2 {
 325                                 regulator-name = "vcc3v0_touch";
 326                                 regulator-always-on;
 327                                 regulator-boot-on;
 328                                 regulator-min-microvolt = <3000000>;
 329                                 regulator-max-microvolt = <3000000>;
 330                                 regulator-state-mem {
 331                                         regulator-off-in-suspend;
 332                                 };
 333                         };
 334
 335                         vcca_1v8: LDO_REG3 {
 336                                 regulator-name = "vcca_1v8";
 337                                 regulator-always-on;
 338                                 regulator-boot-on;
 339                                 regulator-min-microvolt = <1800000>;
 340                                 regulator-max-microvolt = <1800000>;
 341                                 regulator-state-mem {
 342                                         regulator-on-in-suspend;
 343                                         regulator-suspend-microvolt = <1800000>;
 344                                 };
 345                         };
 346
 347                         vcc_sdio: LDO_REG4 {
 348                                 regulator-name = "vcc_sdio";
 349                                 regulator-always-on;
 350                                 regulator-boot-on;
 351                                 regulator-min-microvolt = <1800000>;
 352                                 regulator-max-microvolt = <3000000>;
 353                                 regulator-state-mem {
 354                                         regulator-on-in-suspend;
 355                                         regulator-suspend-microvolt = <3000000>;
 356                                 };
 357                         };
 358
 359                         vcca3v0_codec: LDO_REG5 {
 360                                 regulator-name = "vcca3v0_codec";
 361                                 regulator-always-on;
 362                                 regulator-boot-on;
 363                                 regulator-min-microvolt = <3000000>;
 364                                 regulator-max-microvolt = <3000000>;
 365                                 regulator-state-mem {
 366                                         regulator-off-in-suspend;
 367                                 };
 368                         };
 369
 370                         vcc_1v5: LDO_REG6 {
 371                                 regulator-name = "vcc_1v5";
 372                                 regulator-always-on;
 373                                 regulator-boot-on;
 374                                 regulator-min-microvolt = <1500000>;
 375                                 regulator-max-microvolt = <1500000>;
 376                                 regulator-state-mem {
 377                                         regulator-on-in-suspend;
 378                                         regulator-suspend-microvolt = <1500000>;
 379                                 };
 380                         };
 381
 382                         vcca1v8_codec: LDO_REG7 {
 383                                 regulator-name = "vcca1v8_codec";
 384                                 regulator-always-on;
 385                                 regulator-boot-on;
 386                                 regulator-min-microvolt = <1800000>;
 387                                 regulator-max-microvolt = <1800000>;
 388                                 regulator-state-mem {
 389                                         regulator-off-in-suspend;
 390                                 };
 391                         };
 392
 393                         vcc_3v0: LDO_REG8 {
 394                                 regulator-name = "vcc_3v0";
 395                                 regulator-always-on;
 396                                 regulator-boot-on;
 397                                 regulator-min-microvolt = <3000000>;
 398                                 regulator-max-microvolt = <3000000>;
 399                                 regulator-state-mem {
 400                                         regulator-on-in-suspend;
 401                                         regulator-suspend-microvolt = <3000000>;
 402                                 };
 403                         };
 404
 405                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 406                                 regulator-name = "vcc3v3_s3";
 407                                 regulator-always-on;
 408                                 regulator-boot-on;
 409                                 regulator-state-mem {
 410                                         regulator-off-in-suspend;
 411                                 };
 412                         };
 413
 414                         vcc3v3_s0: SWITCH_REG2 {
 415                                 regulator-name = "vcc3v3_s0";
 416                                 regulator-always-on;
 417                                 regulator-boot-on;
 418                                 regulator-state-mem {
 419                                         regulator-off-in-suspend;
 420                                 };
 421                         };
 422                 };
 423         };
 424
 425         vdd_cpu_b: regulator@40 {
 426                 compatible = "silergy,syr827";
 427                 reg = <0x40>;
 428                 fcs,suspend-voltage-selector = <1>;
 429                 pinctrl-names = "default";
 430                 pinctrl-0 = <&vsel1_gpio>;
 431                 regulator-name = "vdd_cpu_b";
 432                 regulator-min-microvolt = <712500>;
 433                 regulator-max-microvolt = <1500000>;
 434                 regulator-ramp-delay = <1000>;
 435                 regulator-always-on;
 436                 regulator-boot-on;
 437                 vin-supply = <&vcc5v0_sys>;
 438
 439                 regulator-state-mem {
 440                         regulator-off-in-suspend;
 441                 };
 442         };
 443
 444         vdd_gpu: regulator@41 {
 445                 compatible = "silergy,syr828";
 446                 reg = <0x41>;
 447                 fcs,suspend-voltage-selector = <1>;
 448                 pinctrl-names = "default";
 449                 pinctrl-0 = <&vsel2_gpio>;
 450                 regulator-name = "vdd_gpu";
 451                 regulator-min-microvolt = <712500>;
 452                 regulator-max-microvolt = <1500000>;
 453                 regulator-ramp-delay = <1000>;
 454                 regulator-always-on;
 455                 regulator-boot-on;
 456                 vin-supply = <&vcc5v0_sys>;
 457
 458                 regulator-state-mem {
 459                         regulator-off-in-suspend;
 460                 };
 461         };
 462 };
 463
 464 &i2c1 {
 465         i2c-scl-rising-time-ns = <300>;
 466         i2c-scl-falling-time-ns = <15>;
 467         status = "okay";
 468 };
 469
 470 &i2c3 {
 471         i2c-scl-rising-time-ns = <450>;
 472         i2c-scl-falling-time-ns = <15>;
 473         status = "okay";
 474 };
 475
 476 &i2c4 {
 477         i2c-scl-rising-time-ns = <600>;
 478         i2c-scl-falling-time-ns = <20>;
 479         status = "okay";
 480
 481         fusb0: typec-portc@22 {
 482                 compatible = "fcs,fusb302";
 483                 reg = <0x22>;
 484                 interrupt-parent = <&gpio1>;
 485                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 486                 pinctrl-names = "default";
 487                 pinctrl-0 = <&fusb0_int>;
 488                 vbus-supply = <&vcc5v0_typec>;
 489                 status = "okay";
 490         };
 491 };
 492
 493 &i2s0 {
 494         rockchip,playback-channels = <8>;
 495         rockchip,capture-channels = <8>;
 496         status = "okay";
 497 };
 498
 499 &i2s1 {
 500         rockchip,playback-channels = <2>;
 501         rockchip,capture-channels = <2>;
 502         status = "okay";
 503
 504         i2s1_p0: port {
 505                 i2s1_p0_0: endpoint {
 506                         dai-format = "i2s";
 507                         mclk-fs = <256>;
 508                         remote-endpoint = <&es8316_p0_0>;
 509                 };
 510         };
 511 };
 512
 513 &i2s2 {
 514         status = "okay";
 515 };
 516
 517 &io_domains {
 518         status = "okay";
 519
 520         bt656-supply = <&vcc1v8_dvp>;
 521         audio-supply = <&vcc_3v0>;
 522         sdmmc-supply = <&vcc_sdio>;
 523         gpio1830-supply = <&vcc_3v0>;
 524 };
 525
 526 &pcie0 {
 527         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 528         num-lanes = <4>;
 529         pinctrl-names = "default";
 530         pinctrl-0 = <&pcie_perst>;
 531         vpcie12v-supply = <&vcc12v_dcin>;
 532         vpcie3v3-supply = <&vcc3v3_pcie>;
 533         status = "okay";
 534 };
 535
 536 &pcie_phy {
 537         status = "okay";
 538 };
 539
 540 &pmu_io_domains {
 541         pmu1830-supply = <&vcc_3v0>;
 542         status = "okay";
 543 };
 544
 545 &pinctrl {
 546         bt {
 547                 bt_enable_h: bt-enable-h {
 548                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 549                 };
 550
 551                 bt_host_wake_l: bt-host-wake-l {
 552                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 553                 };
 554
 555                 bt_wake_l: bt-wake-l {
 556                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 557                 };
 558         };
 559
 560         buttons {
 561                 pwrbtn: pwrbtn {
 562                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 563                 };
 564         };
 565
 566         fusb302x {
 567                 fusb0_int: fusb0-int {
 568                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 569                 };
 570         };
 571
 572         leds {
 573                 work_led_gpio: work_led-gpio {
 574                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 575                 };
 576
 577                 diy_led_gpio: diy_led-gpio {
 578                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 579                 };
 580         };
 581
 582         pcie {
 583                 pcie_perst: pcie-perst {
 584                         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 585                 };
 586
 587                 pcie_pwr_en: pcie-pwr-en {
 588                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 589                 };
 590         };
 591
 592         pmic {
 593                 pmic_int_l: pmic-int-l {
 594                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 595                 };
 596
 597                 vsel1_gpio: vsel1-gpio {
 598                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 599                 };
 600
 601                 vsel2_gpio: vsel2-gpio {
 602                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 603                 };
 604         };
 605
 606         sdio-pwrseq {
 607                 wifi_enable_h: wifi-enable-h {
 608                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 609                 };
 610         };
 611
 612         usb-typec {
 613                 vcc5v0_typec_en: vcc5v0_typec_en {
 614                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 615                 };
 616         };
 617
 618         usb2 {
 619                 vcc5v0_host_en: vcc5v0-host-en {
 620                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 621                 };
 622         };
 623 };
 624
 625 &pwm0 {
 626         status = "okay";
 627 };
 628
 629 &pwm1 {
 630         status = "okay";
 631 };
 632
 633 &pwm2 {
 634         status = "okay";
 635 };
 636
 637 &saradc {
 638         vref-supply = <&vcca1v8_s3>;
 639         status = "okay";
 640 };
 641
 642 &sdio0 {
 643         bus-width = <4>;
 644         cap-sd-highspeed;
 645         cap-sdio-irq;
 646         disable-wp;
 647         keep-power-in-suspend;
 648         mmc-pwrseq = <&sdio_pwrseq>;
 649         non-removable;
 650         pinctrl-names = "default";
 651         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 652         sd-uhs-sdr104;
 653         status = "okay";
 654 };
 655
 656 &sdmmc {
 657         bus-width = <4>;
 658         cap-sd-highspeed;
 659         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 660         disable-wp;
 661         max-frequency = <150000000>;
 662         pinctrl-names = "default";
 663         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 664         status = "okay";
 665 };
 666
 667 &sdhci {
 668         bus-width = <8>;
 669         mmc-hs200-1_8v;
 670         non-removable;
 671         status = "okay";
 672 };
 673
 674 &spi1 {
 675         status = "okay";
 676
 677         flash@0 {
 678                 compatible = "jedec,spi-nor";
 679                 reg = <0>;
 680                 spi-max-frequency = <10000000>;
 681         };
 682 };
 683
 684 &tcphy0 {
 685         status = "okay";
 686 };
 687
 688 &tcphy1 {
 689         status = "okay";
 690 };
 691
 692 &tsadc {
 693         /* tshut mode 0:CRU 1:GPIO */
 694         rockchip,hw-tshut-mode = <1>;
 695         /* tshut polarity 0:LOW 1:HIGH */
 696         rockchip,hw-tshut-polarity = <1>;
 697         status = "okay";
 698 };
 699
 700 &u2phy0 {
 701         status = "okay";
 702
 703         u2phy0_otg: otg-port {
 704                 status = "okay";
 705         };
 706
 707         u2phy0_host: host-port {
 708                 phy-supply = <&vcc5v0_host>;
 709                 status = "okay";
 710         };
 711 };
 712
 713 &u2phy1 {
 714         status = "okay";
 715
 716         u2phy1_otg: otg-port {
 717                 status = "okay";
 718         };
 719
 720         u2phy1_host: host-port {
 721                 phy-supply = <&vcc5v0_host>;
 722                 status = "okay";
 723         };
 724 };
 725
 726 &uart0 {
 727         pinctrl-names = "default";
 728         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 729         status = "okay";
 730
 731         bluetooth {
 732                 compatible = "brcm,bcm43438-bt";
 733                 clocks = <&rk808 1>;
 734                 clock-names = "lpo";
 735                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 736                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 737                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 738                 pinctrl-names = "default";
 739                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 740                 vbat-supply = <&vcc3v3_sys>;
 741                 vddio-supply = <&vcc_1v8>;
 742         };
 743 };
 744
 745 &uart2 {
 746         status = "okay";
 747 };
 748
 749 &usb_host0_ehci {
 750         status = "okay";
 751 };
 752
 753 &usb_host0_ohci {
 754         status = "okay";
 755 };
 756
 757 &usb_host1_ehci {
 758         status = "okay";
 759 };
 760
 761 &usb_host1_ohci {
 762         status = "okay";
 763 };
 764
 765 &usbdrd3_0 {
 766         status = "okay";
 767 };
 768
 769 &usbdrd_dwc3_0 {
 770         status = "okay";
 771         dr_mode = "otg";
 772 };
 773
 774 &usbdrd3_1 {
 775         status = "okay";
 776 };
 777
 778 &usbdrd_dwc3_1 {
 779         status = "okay";
 780         dr_mode = "host";
 781 };
 782
 783 &vopb {
 784         status = "okay";
 785 };
 786
 787 &vopb_mmu {
 788         status = "okay";
 789 };
 790
 791 &vopl {
 792         status = "okay";
 793 };
 794
 795 &vopl_mmu {
 796         status = "okay";
 797 };