From 0c2256670fc0822cc5a86bca754186c50f943a1c Mon Sep 17 00:00:00 2001 From: Guus Sliepen Date: Fri, 8 Aug 2003 14:07:12 +0000 Subject: [PATCH] Remove unused stuff from doc/. Let configure update pathnames in documentation. --- configure.in | 12 +- doc/GNUmakefile | 23 - doc/Makefile.am | 21 +- doc/Makefile.maint | 38 - doc/Makefile.summ | 2 - doc/help2man | 375 -- doc/texinfo.tex | 5484 --------------------------- doc/{tinc.conf.5 => tinc.conf.5.in} | 30 +- doc/tinc.texi | 76 +- doc/{tincd.8 => tincd.8.in} | 18 +- doc/tincinclude.texi.in | 4 + 11 files changed, 77 insertions(+), 6006 deletions(-) delete mode 100644 doc/GNUmakefile delete mode 100644 doc/Makefile.maint delete mode 100644 doc/Makefile.summ delete mode 100644 doc/help2man delete mode 100644 doc/texinfo.tex rename doc/{tinc.conf.5 => tinc.conf.5.in} (95%) rename doc/{tincd.8 => tincd.8.in} (91%) create mode 100644 doc/tincinclude.texi.in diff --git a/configure.in b/configure.in index ce67855..8f21837 100644 --- a/configure.in +++ b/configure.in @@ -1,6 +1,6 @@ dnl Process this file with autoconf to produce a configure script. -dnl $Id: configure.in,v 1.13.2.80 2003/08/02 16:05:33 guus Exp $ +dnl $Id: configure.in,v 1.13.2.81 2003/08/08 14:07:11 guus Exp $ AC_PREREQ(2.57) AC_INIT(src/tincd.c) @@ -296,10 +296,6 @@ AC_ARG_ENABLE(tracing, AC_SUBST(INCLUDES) -AC_OUTPUT(Makefile -src/Makefile -doc/Makefile -lib/Makefile -po/Makefile.in -m4/Makefile -) +AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile doc/tincd.8 doc/tinc.conf.5 doc/tincinclude.texi lib/Makefile po/Makefile.in m4/Makefile]) + +AC_OUTPUT diff --git a/doc/GNUmakefile b/doc/GNUmakefile deleted file mode 100644 index 8fb7a6b..0000000 --- a/doc/GNUmakefile +++ /dev/null @@ -1,23 +0,0 @@ -# Having a separate GNUmakefile lets me use features of GNU make -# to generate the man pages. -# This makefile is used only if you run GNU Make. -# It is necessary if you want to build targets usually of interest -# only to the maintainer. - -have-Makefile := $(shell test -f Makefile && echo yes) - -# If the user runs GNU make but has not yet run ./configure, -# give them a diagnostic. -ifeq ($(have-Makefile),yes) - -include Makefile -include $(srcdir)/Makefile.maint - -else - -all: - @echo There seems to be no Makefile in this directory. - @echo "You must run ./configure before running \`make'." - @exit 1 - -endif diff --git a/doc/Makefile.am b/doc/Makefile.am index c3b209f..dc4c67c 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -2,17 +2,11 @@ info_TEXINFOS = tinc.texi -dyn_MANS = -man_aux = $(dyn_MANS:.8=.x) +man_MANS = tincd.8 tinc.conf.5 -man_MANS = tincd.8 tinc.conf.5 $(dyn_MANS) +EXTRA_DIST = tincinclude.texi.in tincd.8.in tinc.conf.5.in sample-config.tar.gz -PERL = @PERL@ -HELP2MAN = help2man -MAINTAINERCLEANFILES = $(dyn_MANS) - -EXTRA_DIST = $(man_MANS) $(HELP2MAN) $(man_aux) \ - Makefile.maint GNUmakefile Makefile.summ sample-config.tar.gz +CLEANFILES = *.html # Use `ginstall' in the definition of man_MANS to avoid # confusion with the `install' target. The install rule transforms `ginstall' @@ -22,13 +16,8 @@ transform = s/ginstall/install/; @program_transform_name@ # For additional rules usually of interest only to the maintainer, # see GNUmakefile and Makefile.maint. -tinc.pdf: tinc.texi - texi2pdf -o tinc.pdf tinc.texi - texi2html: tinc.texi - mkdir -p html - rm -f html/*.html - cd html && texi2html -split=chapter ../tinc.texi + texi2html -split=chapter tinc.texi -%.html: % +%.html: $(man_MANS) w3mman2html $< > $@ diff --git a/doc/Makefile.maint b/doc/Makefile.maint deleted file mode 100644 index 75804f0..0000000 --- a/doc/Makefile.maint +++ /dev/null @@ -1,38 +0,0 @@ -# This -*- Makefile -*- uses features of GNU make. -# It is included via GNUmakefile. - -# The following one line summaries were extracted from the -# original man pages using this bit of sh code: -# for i in *.1; do echo "$i: "|tr -d '\012'; \ -# grep -A1 SH.NAME $i|sed '/SH NAME/d;s/^[^ ][^ ]* .- //'; done - -include Makefile.summ - -HELP2MAN-run = $(PERL) -w -- $(srcdir)/$(HELP2MAN) - -# Depend on configure.in to get version number changes. -$(dyn_MANS): $(top_srcdir)/configure.in - -# Depend on the source file containing the --help text. -# Filter out irregular cases. -regular-men = $(filter-out $(irregular-men),$(dyn_MANS)) -$(regular-men): %.8: $(top_srcdir)/src/%.c - -executable = $(patsubst %/install,%/ginstall, ../src/$(basename $@)) -$(dyn_MANS): %.8: %.x $(HELP2MAN) - @if test -f $(executable); then \ - echo "Updating man page $@"; \ - rm -f $@-t $@; \ - $(HELP2MAN-run) \ - --name="$($(basename $@)-summary)" \ - --include=$(basename $@).x \ - $(executable) > $@-t; \ - chmod -w $@-t; \ - mv $@-t $@; \ - else \ - echo "WARNING: The man page $@ cannot be updated yet."; \ - echo " Retry once the corresponding executable is built."; \ - fi - -sample-config.tar.gz: - GZIP=$(GZIP_ENV) $(AMTAR) chozf sample-config.tar.gz sample-config diff --git a/doc/Makefile.summ b/doc/Makefile.summ deleted file mode 100644 index a97b492..0000000 --- a/doc/Makefile.summ +++ /dev/null @@ -1,2 +0,0 @@ -# -*- makefile -*- -tincd-summary = tinc VPN daemon diff --git a/doc/help2man b/doc/help2man deleted file mode 100644 index 71778a9..0000000 --- a/doc/help2man +++ /dev/null @@ -1,375 +0,0 @@ -#!/usr/bin/perl -w - -# Generate a short man page from --help and --version output. -# Copyright © 1997, 98 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Written by Brendan O'Dea - -use 5.004; -use strict; -use Getopt::Long; -use POSIX qw(strftime setlocale LC_TIME); - -my $this_program = 'help2man'; -my $this_version = '1.006'; -my $version_info = < -EOT - -my $help_info = < \$opt_name, - 'include=s' => \$include, - 'opt-include=s' => \$opt_include, - 'output=s' => \$opt_output, - 'no-info' => \$opt_no_info, - help => sub { print $help_info; exit }, - version => sub { print $version_info; exit }, -) or die $help_info; - -die $help_info unless @ARGV == 1; - -my %include = (); -my @include = (); # to retain order - -# Process include file (if given). Format is: -# -# [section name] -# verbatim text - -if ($include or $opt_include) -{ - if (open INC, $include || $opt_include) - { - my $sect; - - while () - { - if (/^\[([^]]+)\]/) - { - $sect = uc $1; - $sect =~ s/^\s+//; - $sect =~ s/\s+$//; - next; - } - - # Silently ignore anything before the first - # section--allows for comments and revision info. - next unless $sect; - - push @include, $sect unless $include{$sect}; - $include{$sect} ||= ''; - $include{$sect} .= $_; - } - - close INC; - - die "$this_program: no valid information found in `$include'\n" - unless %include; - - # Compress trailing blank lines. - for (keys %include) - { - $include{$_} =~ s/\n+$//; - $include{$_} .= "\n" unless /^NAME$/; - } - } - else - { - die "$this_program: can't open `$include' ($!)\n" if $include; - } -} - -# Turn off localisation of executable's ouput. -@ENV{qw(LANGUAGE LANG LC_ALL)} = ('C') x 3; - -# Turn off localisation of date (for strftime) -setlocale LC_TIME, 'C'; - -# Grab help and version paragraphs from executable -my @help = split /\n\n+/, `$ARGV[0] --help 2>/dev/null` - or die "$this_program: can't get `--help' info from $ARGV[0]\n"; - -my @version = split /\n\n+/, `$ARGV[0] --version 2>/dev/null` - or die "$this_program: can't get `--version' info from $ARGV[0]\n"; - -my $date = strftime "%B %Y", localtime; -my $program = $ARGV[0]; $program =~ s!.*/!!; -my $package = $program; -my $version; - -if ($opt_output) -{ - unlink $opt_output - or die "$this_program: can't unlink $opt_output ($!)\n" - if -e $opt_output; - - open STDOUT, ">$opt_output" - or die "$this_program: can't create $opt_output ($!)\n"; -} - -# The first line of the --version information is assumed to be in one -# of the following formats: -# -# -# -# GNU -# (GNU ) -# - GNU -# -# and seperated from any copyright/author details by a blank line. - -$_ = shift @version; - -if (/^(\S+)\s+\((GNU\s+[^)]+)\)\s+(.*)/ or - /^(\S+)\s+-\s*(GNU\s+\S+)\s+(.*)/) -{ - $program = $1; - $package = $2; - $version = $3; -} -elsif (/^(GNU\s+)?(\S+)\s+(.*)/) -{ - $program = $2; - $package = $1 ? "$1$2" : $2; - $version = $3; -} -else -{ - $version = $_; -} - -$program =~ s!.*/!!; - -# no info for `info' itself -$opt_no_info = 1 if $program eq 'info'; - -# --name overrides --include contents -$include{NAME} = "$program \\- $opt_name" if $opt_name; - -# Default (useless) NAME paragraph -$include{NAME} ||= "$program \\- manual page for $program $version"; - -# Man pages traditionally have the page title in caps. -my $PROGRAM = uc $program; - -# Header. -print < 0pt - % Only leave this space if the footline is nonempty. - % (We lessened \vsize for it in \oddfootingxxx.) - % The \baselineskip=24pt in plain's \makefootline has no effect. - \vskip 2\baselineskip - \unvbox\footlinebox - \fi - % - \ifcropmarks - \egroup % end of \vbox\bgroup - \hfil\egroup % end of (centering) \line\bgroup - \vskip\topandbottommargin plus1fill minus1fill - \boxmaxdepth = \cornerthick - \vbox to0pt{\vss - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% - }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% - }% - \egroup % \vbox from first cropmarks clause - \fi - }% end of \shipout\vbox - }% end of group with \turnoffactive - \advancepageno - \ifnum\outputpenalty>-20000 \else\dosupereject\fi -} - -\newinsert\margin \dimen\margin=\maxdimen - -\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} -{\catcode`\@ =11 -\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi -% marginal hacks, juha@viisa.uucp (Juha Takala) -\ifvoid\margin\else % marginal info is present - \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi -\dimen@=\dp#1 \unvbox#1 -\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi -\ifr@ggedbottom \kern-\dimen@ \vfil \fi} -} - -% Here are the rules for the cropmarks. Note that they are -% offset so that the space between them is truly \outerhsize or \outervsize -% (P. A. MacKay, 12 November, 1986) -% -\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} -\def\nstop{\vbox - {\hrule height\cornerthick depth\cornerlong width\cornerthick}} -\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} -\def\nsbot{\vbox - {\hrule height\cornerlong depth\cornerthick width\cornerthick}} - -% Parse an argument, then pass it to #1. The argument is the rest of -% the input line (except we remove a trailing comment). #1 should be a -% macro which expects an ordinary undelimited TeX argument. -% -\def\parsearg#1{% - \let\next = #1% - \begingroup - \obeylines - \futurelet\temp\parseargx -} - -% If the next token is an obeyed space (from an @example environment or -% the like), remove it and recurse. Otherwise, we're done. -\def\parseargx{% - % \obeyedspace is defined far below, after the definition of \sepspaces. - \ifx\obeyedspace\temp - \expandafter\parseargdiscardspace - \else - \expandafter\parseargline - \fi -} - -% Remove a single space (as the delimiter token to the macro call). -{\obeyspaces % - \gdef\parseargdiscardspace {\futurelet\temp\parseargx}} - -{\obeylines % - \gdef\parseargline#1^^M{% - \endgroup % End of the group started in \parsearg. - % - % First remove any @c comment, then any @comment. - % Result of each macro is put in \toks0. - \argremovec #1\c\relax % - \expandafter\argremovecomment \the\toks0 \comment\relax % - % - % Call the caller's macro, saved as \next in \parsearg. - \expandafter\next\expandafter{\the\toks0}% - }% -} - -% Since all \c{,omment} does is throw away the argument, we can let TeX -% do that for us. The \relax here is matched by the \relax in the call -% in \parseargline; it could be more or less anything, its purpose is -% just to delimit the argument to the \c. -\def\argremovec#1\c#2\relax{\toks0 = {#1}} -\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}} - -% \argremovec{,omment} might leave us with trailing spaces, though; e.g., -% @end itemize @c foo -% will have two active spaces as part of the argument with the -% `itemize'. Here we remove all active spaces from #1, and assign the -% result to \toks0. -% -% This loses if there are any *other* active characters besides spaces -% in the argument -- _ ^ +, for example -- since they get expanded. -% Fortunately, Texinfo does not define any such commands. (If it ever -% does, the catcode of the characters in questionwill have to be changed -% here.) But this means we cannot call \removeactivespaces as part of -% \argremovec{,omment}, since @c uses \parsearg, and thus the argument -% that \parsearg gets might well have any character at all in it. -% -\def\removeactivespaces#1{% - \begingroup - \ignoreactivespaces - \edef\temp{#1}% - \global\toks0 = \expandafter{\temp}% - \endgroup -} - -% Change the active space to expand to nothing. -% -\begingroup - \obeyspaces - \gdef\ignoreactivespaces{\obeyspaces\let =\empty} -\endgroup - - -\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} - -%% These are used to keep @begin/@end levels from running away -%% Call \inENV within environments (after a \begingroup) -\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} -\def\ENVcheck{% -\ifENV\errmessage{Still within an environment; press RETURN to continue} -\endgroup\fi} % This is not perfect, but it should reduce lossage - -% @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Press RETURN to continue.} - -\outer\def\begin{\parsearg\beginxxx} - -\def\beginxxx #1{% -\expandafter\ifx\csname #1\endcsname\relax -{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else -\csname #1\endcsname\fi} - -% @end foo executes the definition of \Efoo. -% -\def\end{\parsearg\endxxx} -\def\endxxx #1{% - \removeactivespaces{#1}% - \edef\endthing{\the\toks0}% - % - \expandafter\ifx\csname E\endthing\endcsname\relax - \expandafter\ifx\csname \endthing\endcsname\relax - % There's no \foo, i.e., no ``environment'' foo. - \errhelp = \EMsimple - \errmessage{Undefined command `@end \endthing'}% - \else - \unmatchedenderror\endthing - \fi - \else - % Everything's ok; the right environment has been started. - \csname E\endthing\endcsname - \fi -} - -% There is an environment #1, but it hasn't been started. Give an error. -% -\def\unmatchedenderror#1{% - \errhelp = \EMsimple - \errmessage{This `@end #1' doesn't have a matching `@#1'}% -} - -% Define the control sequence \E#1 to give an unmatched @end error. -% -\def\defineunmatchedend#1{% - \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}% -} - - -% Single-spacing is done by various environments (specifically, in -% \nonfillstart and \quotations). -\newskip\singlespaceskip \singlespaceskip = 12.5pt -\def\singlespace{% - % Why was this kern here? It messes up equalizing space above and below - % environments. --karl, 6may93 - %{\advance \baselineskip by -\singlespaceskip - %\kern \baselineskip}% - \setleading \singlespaceskip -} - -%% Simple single-character @ commands - -% @@ prints an @ -% Kludge this until the fonts are right (grr). -\def\@{{\tt\char64}} - -% This is turned off because it was never documented -% and you can use @w{...} around a quote to suppress ligatures. -%% Define @` and @' to be the same as ` and ' -%% but suppressing ligatures. -%\def\`{{`}} -%\def\'{{'}} - -% Used to generate quoted braces. -\def\mylbrace {{\tt\char123}} -\def\myrbrace {{\tt\char125}} -\let\{=\mylbrace -\let\}=\myrbrace -\begingroup - % Definitions to produce actual \{ & \} command in an index. - \catcode`\{ = 12 \catcode`\} = 12 - \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\@ = 0 \catcode`\\ = 12 - @gdef@lbracecmd[\{]% - @gdef@rbracecmd[\}]% -@endgroup - -% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent -% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H. -\let\, = \c -\let\dotaccent = \. -\def\ringaccent#1{{\accent23 #1}} -\let\tieaccent = \t -\let\ubaraccent = \b -\let\udotaccent = \d - -% Other special characters: @questiondown @exclamdown -% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss. -\def\questiondown{?`} -\def\exclamdown{!`} - -% Dotless i and dotless j, used for accents. -\def\imacro{i} -\def\jmacro{j} -\def\dotless#1{% - \def\temp{#1}% - \ifx\temp\imacro \ptexi - \else\ifx\temp\jmacro \j - \else \errmessage{@dotless can be used only with i or j}% - \fi\fi -} - -% Be sure we're in horizontal mode when doing a tie, since we make space -% equivalent to this in @example-like environments. Otherwise, a space -% at the beginning of a line will start with \penalty -- and -% since \penalty is valid in vertical mode, we'd end up putting the -% penalty on the vertical list instead of in the new paragraph. -{\catcode`@ = 11 - % Avoid using \@M directly, because that causes trouble - % if the definition is written into an index file. - \global\let\tiepenalty = \@M - \gdef\tie{\leavevmode\penalty\tiepenalty\ } -} - -% @: forces normal size whitespace following. -\def\:{\spacefactor=1000 } - -% @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} - -% @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } - -% @! is an end-of-sentence bang. -\def\!{!\spacefactor=3000 } - -% @? is an end-of-sentence query. -\def\?{?\spacefactor=3000 } - -% @w prevents a word break. Without the \leavevmode, @w at the -% beginning of a paragraph, when TeX is still in vertical mode, would -% produce a whole line of output instead of starting the paragraph. -\def\w#1{\leavevmode\hbox{#1}} - -% @group ... @end group forces ... to be all on one page, by enclosing -% it in a TeX vbox. We use \vtop instead of \vbox to construct the box -% to keep its height that of a normal line. According to the rules for -% \topskip (p.114 of the TeXbook), the glue inserted is -% max (\topskip - \ht (first item), 0). If that height is large, -% therefore, no glue is inserted, and the space between the headline and -% the text is small, which looks bad. -% -\def\group{\begingroup - \ifnum\catcode13=\active \else - \errhelp = \groupinvalidhelp - \errmessage{@group invalid in context where filling is enabled}% - \fi - % - % The \vtop we start below produces a box with normal height and large - % depth; thus, TeX puts \baselineskip glue before it, and (when the - % next line of text is done) \lineskip glue after it. (See p.82 of - % the TeXbook.) Thus, space below is not quite equal to space - % above. But it's pretty close. - \def\Egroup{% - \egroup % End the \vtop. - \endgroup % End the \group. - }% - % - \vtop\bgroup - % We have to put a strut on the last line in case the @group is in - % the midst of an example, rather than completely enclosing it. - % Otherwise, the interline space between the last line of the group - % and the first line afterwards is too small. But we can't put the - % strut in \Egroup, since there it would be on a line by itself. - % Hence this just inserts a strut at the beginning of each line. - \everypar = {\strut}% - % - % Since we have a strut on every line, we don't need any of TeX's - % normal interline spacing. - \offinterlineskip - % - % OK, but now we have to do something about blank - % lines in the input in @example-like environments, which normally - % just turn into \lisppar, which will insert no space now that we've - % turned off the interline space. Simplest is to make them be an - % empty paragraph. - \ifx\par\lisppar - \edef\par{\leavevmode \par}% - % - % Reset ^^M's definition to new definition of \par. - \obeylines - \fi - % - % Do @comment since we are called inside an environment such as - % @example, where each end-of-line in the input causes an - % end-of-line in the output. We don't want the end-of-line after - % the `@group' to put extra space in the output. Since @group - % should appear on a line by itself (according to the Texinfo - % manual), we don't worry about eating any user text. - \comment -} -% -% TeX puts in an \escapechar (i.e., `@') at the beginning of the help -% message, so this ends up printing `@group can only ...'. -% -\newhelp\groupinvalidhelp{% -group can only be used in environments such as @example,^^J% -where each line of input produces a line of output.} - -% @need space-in-mils -% forces a page break if there is not space-in-mils remaining. - -\newdimen\mil \mil=0.001in - -\def\need{\parsearg\needx} - -% Old definition--didn't work. -%\def\needx #1{\par % -%% This method tries to make TeX break the page naturally -%% if the depth of the box does not fit. -%{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak -%\prevdepth=-1000pt -%}} - -\def\needx#1{% - % Go into vertical mode, so we don't make a big box in the middle of a - % paragraph. - \par - % - % Don't add any leading before our big empty box, but allow a page - % break, since the best break might be right here. - \allowbreak - \nointerlineskip - \vtop to #1\mil{\vfil}% - % - % TeX does not even consider page breaks if a penalty added to the - % main vertical list is 10000 or more. But in order to see if the - % empty box we just added fits on the page, we must make it consider - % page breaks. On the other hand, we don't want to actually break the - % page after the empty box. So we use a penalty of 9999. - % - % There is an extremely small chance that TeX will actually break the - % page at this \penalty, if there are no other feasible breakpoints in - % sight. (If the user is using lots of big @group commands, which - % almost-but-not-quite fill up a page, TeX will have a hard time doing - % good page breaking, for example.) However, I could not construct an - % example where a page broke at this \penalty; if it happens in a real - % document, then we can reconsider our strategy. - \penalty9999 - % - % Back up by the size of the box, whether we did a page break or not. - \kern -#1\mil - % - % Do not allow a page break right after this kern. - \nobreak -} - -% @br forces paragraph break - -\let\br = \par - -% @dots{} output an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. -% -\def\dots{% - \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \leavevmode - \hbox to 2em{% - \hskip 0pt plus 0.25fil minus 0.25fil - .\hss.\hss.\hss.% - \hskip 0pt plus 0.5fil minus 0.5fil - }% - \spacefactor=3000 -} - - -% @page forces the start of a new page -% -\def\page{\par\vfill\supereject} - -% @exdent text.... -% outputs text on separate line in roman font, starting at standard page margin - -% This records the amount of indent in the innermost environment. -% That's how much \exdent should take out. -\newskip\exdentamount - -% This defn is used inside fill environments such as @defun. -\def\exdent{\parsearg\exdentyyy} -\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}} - -% This defn is used inside nofill environments such as @example. -\def\nofillexdent{\parsearg\nofillexdentyyy} -\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount -\leftline{\hskip\leftskip{\rm#1}}}} - -% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph. - -\def\inmargin#1{% -\strut\vadjust{\nobreak\kern-\strutdepth - \vtop to \strutdepth{\baselineskip\strutdepth\vss - \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}} -\newskip\inmarginspacing \inmarginspacing=1cm -\def\strutdepth{\dp\strutbox} - -%\hbox{{\rm#1}}\hfil\break}} - -% @include file insert text of that file as input. -% Allow normal characters that we make active in the argument (a file name). -\def\include{\begingroup - \catcode`\\=12 - \catcode`~=12 - \catcode`^=12 - \catcode`_=12 - \catcode`|=12 - \catcode`<=12 - \catcode`>=12 - \catcode`+=12 - \parsearg\includezzz} -% Restore active chars for included file. -\def\includezzz#1{\endgroup\begingroup - % Read the included file in a group so nested @include's work. - \def\thisfile{#1}% - \input\thisfile -\endgroup} - -\def\thisfile{} - -% @center line outputs that line, centered - -\def\center{\parsearg\centerzzz} -\def\centerzzz #1{{\advance\hsize by -\leftskip -\advance\hsize by -\rightskip -\centerline{#1}}} - -% @sp n outputs n lines of vertical space - -\def\sp{\parsearg\spxxx} -\def\spxxx #1{\vskip #1\baselineskip} - -% @comment ...line which is ignored... -% @c is the same as @comment -% @ignore ... @end ignore is another way to write a comment - -\def\comment{\begingroup \catcode`\^^M=\other% -\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% -\commentxxx} -{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} - -\let\c=\comment - -% @paragraphindent is defined for the Info formatting commands only. -\let\paragraphindent=\comment - -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax -} - -% Ignore @ignore ... @end ignore. -% -\def\ignore{\doignore{ignore}} - -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. -% -\def\ifinfo{\doignore{ifinfo}} -\def\ifhtml{\doignore{ifhtml}} -\def\ifnottex{\doignore{ifnottex}} -\def\html{\doignore{html}} -\def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment - -% Ignore text until a line `@end #1'. -% -\def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - % - % And now expand that command. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{***WARNING*** for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi -} - -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. -% -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. - % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% -} - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. -% -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup -} -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} - -% @value{foo} gets the text saved in variable foo. -% -{ - \catcode`\_ = \active - % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup - \catcode`\-=12 \catcode`\_=12 - \indexbreaks \let_\normalunderscore - \valuexxx} -} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} - -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable, since the result -% winds up in the index file. This means that if the variable's value -% contains other Texinfo commands, it's almost certain it will fail -% (although perhaps we could fix that with sufficient work to do a -% one-level expansion on the result, instead of complete). -% -\def\expandablevalue#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']}% - \else - \csname SET#1\endcsname - \fi -} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. -% -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail - \else - \expandafter\ifsetsucceed - \fi -} -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} - -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed - \else - \expandafter\ifclearfail - \fi -} -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. -% -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} - -% @asis just yields its argument. Used with @table, for example. -% -\def\asis#1{#1} - -% @math means output in math mode. -% We don't use $'s directly in the definition of \math because control -% sequences like \math are expanded when the toc file is written. Then, -% we read the toc file back, the $'s will be normal characters (as they -% should be, according to the definition of Texinfo). So we must use a -% control sequence to switch into and out of math mode. -% -% This isn't quite enough for @math to work properly in indices, but it -% seems unlikely it will ever be needed there. -% -\let\implicitmath = $ -\def\math#1{\implicitmath #1\implicitmath} - -% @bullet and @minus need the same treatment as @math, just above. -\def\bullet{\implicitmath\ptexbullet\implicitmath} -\def\minus{\implicitmath-\implicitmath} - -% @refill is a no-op. -\let\refill=\relax - -% If working on a large document in chapters, it is convenient to -% be able to disable indexing, cross-referencing, and contents, for test runs. -% This is done with @novalidate (before @setfilename). -% -\newif\iflinks \linkstrue % by default we want the aux files. -\let\novalidate = \linksfalse - -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \iflinks - \readauxfile - \fi % \openindices needs to do some work in any case. - \openindices - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \global\let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - % Just to be on the safe side, close the input stream before the \input. - \openin 1 texinfo.cnf - \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi - \closein1 - \temp - % - \comment % Ignore the actual filename. -} - -% Called from \setfilename. -% -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% -} - -% @bye. -\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} - - -\message{fonts,} -% Font-change commands. - -% Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf analogous to plain's \rm, etc. -\newfam\sffam -\def\sf{\fam=\sffam \tensf} -\let\li = \sf % Sometimes we call it \li, not \sf. - -% We don't need math for this one. -\def\ttsl{\tenttsl} - -% Use Computer Modern fonts at \magstephalf (11pt). -\newcount\mainmagstep -\mainmagstep=\magstephalf - -% Set the font macro #1 to the font named #2, adding on the -% specified font prefix (normally `cm'). -% #3 is the font's design size, #4 is a scale factor -\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4} - -% Use cm as the default font prefix. -% To specify the font prefix, you must define \fontprefix -% before you read in texinfo.tex. -\ifx\fontprefix\undefined -\def\fontprefix{cm} -\fi -% Support font families that don't use the same naming scheme as CM. -\def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold -\def\bfshape{b} -\def\bxshape{bx} -\def\ttshape{tt} -\def\ttbshape{tt} -\def\ttslshape{sltt} -\def\itshape{ti} -\def\itbshape{bxti} -\def\slshape{sl} -\def\slbshape{bxsl} -\def\sfshape{ss} -\def\sfbshape{ss} -\def\scshape{csc} -\def\scbshape{csc} - -\ifx\bigger\relax -\let\mainmagstep=\magstep1 -\setfont\textrm\rmshape{12}{1000} -\setfont\texttt\ttshape{12}{1000} -\else -\setfont\textrm\rmshape{10}{\mainmagstep} -\setfont\texttt\ttshape{10}{\mainmagstep} -\fi -% Instead of cmb10, you many want to use cmbx10. -% cmbx10 is a prettier font on its own, but cmb10 -% looks better when embedded in a line with cmr10. -\setfont\textbf\bfshape{10}{\mainmagstep} -\setfont\textit\itshape{10}{\mainmagstep} -\setfont\textsl\slshape{10}{\mainmagstep} -\setfont\textsf\sfshape{10}{\mainmagstep} -\setfont\textsc\scshape{10}{\mainmagstep} -\setfont\textttsl\ttslshape{10}{\mainmagstep} -\font\texti=cmmi10 scaled \mainmagstep -\font\textsy=cmsy10 scaled \mainmagstep - -% A few fonts for @defun, etc. -\setfont\defbf\bxshape{10}{\magstep1} %was 1314 -\setfont\deftt\ttshape{10}{\magstep1} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} - -% Fonts for indices and small examples (9pt). -% We actually use the slanted font rather than the italic, -% because texinfo normally uses the slanted fonts for that. -% Do not make many font distinctions in general in the index, since they -% aren't very useful. -\setfont\ninett\ttshape{9}{1000} -\setfont\ninettsl\ttslshape{10}{900} -\setfont\indrm\rmshape{9}{1000} -\setfont\indit\itshape{9}{1000} -\setfont\indsl\slshape{9}{1000} -\let\indtt=\ninett -\let\indttsl=\ninettsl -\let\indsf=\indrm -\let\indbf=\indrm -\setfont\indsc\scshape{10}{900} -\font\indi=cmmi9 -\font\indsy=cmsy9 - -% Fonts for title page: -\setfont\titlerm\rmbshape{12}{\magstep3} -\setfont\titleit\itbshape{10}{\magstep4} -\setfont\titlesl\slbshape{10}{\magstep4} -\setfont\titlett\ttbshape{12}{\magstep3} -\setfont\titlettsl\ttslshape{10}{\magstep4} -\setfont\titlesf\sfbshape{17}{\magstep1} -\let\titlebf=\titlerm -\setfont\titlesc\scbshape{10}{\magstep4} -\font\titlei=cmmi12 scaled \magstep3 -\font\titlesy=cmsy10 scaled \magstep4 -\def\authorrm{\secrm} - -% Chapter (and unnumbered) fonts (17.28pt). -\setfont\chaprm\rmbshape{12}{\magstep2} -\setfont\chapit\itbshape{10}{\magstep3} -\setfont\chapsl\slbshape{10}{\magstep3} -\setfont\chaptt\ttbshape{12}{\magstep2} -\setfont\chapttsl\ttslshape{10}{\magstep3} -\setfont\chapsf\sfbshape{17}{1000} -\let\chapbf=\chaprm -\setfont\chapsc\scbshape{10}{\magstep3} -\font\chapi=cmmi12 scaled \magstep2 -\font\chapsy=cmsy10 scaled \magstep3 - -% Section fonts (14.4pt). -\setfont\secrm\rmbshape{12}{\magstep1} -\setfont\secit\itbshape{10}{\magstep2} -\setfont\secsl\slbshape{10}{\magstep2} -\setfont\sectt\ttbshape{12}{\magstep1} -\setfont\secttsl\ttslshape{10}{\magstep2} -\setfont\secsf\sfbshape{12}{\magstep1} -\let\secbf\secrm -\setfont\secsc\scbshape{10}{\magstep2} -\font\seci=cmmi12 scaled \magstep1 -\font\secsy=cmsy10 scaled \magstep2 - -% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad. -% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded. -% \setfont\ssecsl\slshape{10}{\magstep1} -% \setfont\ssectt\ttshape{10}{\magstep1} -% \setfont\ssecsf\sfshape{10}{\magstep1} - -%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx. -%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than -%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1. -%\setfont\ssectt\ttshape{10}{1315} -%\setfont\ssecsf\sfshape{10}{1315} - -%\let\ssecbf=\ssecrm - -% Subsection fonts (13.15pt). -\setfont\ssecrm\rmbshape{12}{\magstephalf} -\setfont\ssecit\itbshape{10}{1315} -\setfont\ssecsl\slbshape{10}{1315} -\setfont\ssectt\ttbshape{12}{\magstephalf} -\setfont\ssecttsl\ttslshape{10}{1315} -\setfont\ssecsf\sfbshape{12}{\magstephalf} -\let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{\magstep1} -\font\sseci=cmmi12 scaled \magstephalf -\font\ssecsy=cmsy10 scaled 1315 -% The smallcaps and symbol fonts should actually be scaled \magstep1.5, -% but that is not a standard magnification. - -% In order for the font changes to affect most math symbols and letters, -% we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts, we -% don't bother to reset \scriptfont and \scriptscriptfont (which would -% also require loading a lot more fonts). -% -\def\resetmathfonts{% - \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy - \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf - \textfont\ttfam = \tentt \textfont\sffam = \tensf -} - - -% The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this so that font changes will continue to work -% in math mode, where it is the current \fam that is relevant in most -% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam -% \tenbf}, for example. By redefining \tenbf, we obviate the need to -% redefine \bf itself. -\def\textfonts{% - \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl - \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl - \resetmathfonts} -\def\titlefonts{% - \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl - \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc - \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy - \let\tenttsl=\titlettsl - \resetmathfonts \setleading{25pt}} -\def\titlefont#1{{\titlefonts\rm #1}} -\def\chapfonts{% - \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl - \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl - \resetmathfonts \setleading{19pt}} -\def\secfonts{% - \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl - \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl - \resetmathfonts \setleading{16pt}} -\def\subsecfonts{% - \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl - \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl - \resetmathfonts \setleading{15pt}} -\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf? -\def\indexfonts{% - \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl - \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc - \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl - \resetmathfonts \setleading{12pt}} - -% Set up the default fonts, so we can use them for creating boxes. -% -\textfonts - -% Define these so they can be easily changed for other fonts. -\def\angleleft{$\langle$} -\def\angleright{$\rangle$} - -% Count depth in font-changes, for error checks -\newcount\fontdepth \fontdepth=0 - -% Fonts for short table of contents. -\setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bxshape{12}{1000} -\setfont\shortcontsl\slshape{12}{1000} - -%% Add scribe-like font environments, plus @l for inline lisp (usually sans -%% serif) and @ii for TeX italic - -% \smartitalic{ARG} outputs arg in italics, followed by an italic correction -% unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} -\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} - -\let\i=\smartitalic -\let\var=\smartslanted -\let\dfn=\smartslanted -\let\emph=\smartitalic -\let\cite=\smartslanted - -\def\b#1{{\bf #1}} -\let\strong=\b - -% We can't just use \exhyphenpenalty, because that only has effect at -% the end of a paragraph. Restore normal hyphenation at the end of the -% group within which \nohyphenation is presumably called. -% -\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} -\def\restorehyphenation{\hyphenchar\font = `- } - -\def\t#1{% - {\tt \rawbackslash \frenchspacing #1}% - \null -} -\let\ttfont=\t -\def\samp#1{`\tclose{#1}'\null} -\setfont\smallrm\rmshape{8}{1000} -\font\smallsy=cmsy9 -\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{% - \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% - \vbox{\hrule\kern-0.4pt - \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% - \kern-0.4pt\hrule}% - \kern-.06em\raise0.4pt\hbox{\angleright}}}} -% The old definition, with no lozenge: -%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. -\def\tclose#1{% - {% - % Change normal interword space to be same as for the current font. - \spaceskip = \fontdimen2\font - % - % Switch to typewriter. - \tt - % - % But `\ ' produces the large typewriter interword space. - \def\ {{\spaceskip = 0pt{} }}% - % - % Turn off hyphenation. - \nohyphenation - % - \rawbackslash - \frenchspacing - #1% - }% - \null -} - -% We *must* turn on hyphenation at `-' and `_' in \code. -% Otherwise, it is too hard to avoid overfull hboxes -% in the Emacs manual, the Library manual, etc. - -% Unfortunately, TeX uses one parameter (\hyphenchar) to control -% both hyphenation at - and hyphenation within words. -% We must therefore turn them both off (\tclose does that) -% and arrange explicitly to hyphenate at a dash. -% -- rms. -{ - \catcode`\-=\active - \catcode`\_=\active - % - \global\def\code{\begingroup - \catcode`\-=\active \let-\codedash - \catcode`\_=\active \let_\codeunder - \codex - } - % - % If we end up with any active - characters when handling the index, - % just treat them as a normal -. - \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} -} - -\def\realdash{-} -\def\codedash{-\discretionary{}{}{}} -\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}} -\def\codex #1{\tclose{#1}\endgroup} - -%\let\exp=\tclose %Was temporary - -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\def\kbdinputstyle{\parsearg\kbdinputstylexxx} -\def\kbdinputstylexxx#1{% - \def\arg{#1}% - \ifx\arg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is kbdinputdistinct. (Too much of a hassle to call the macro, -% the catcodes are wrong for parsearg to work.) -\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl} - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\look}}\fi -\else{\tclose{\kbdfont\look}}\fi} - -% For @url, @env, @command quotes seem unnecessary, so use \code. -\let\url=\code -\let\env=\code -\let\command=\code - -% @uref (abbreviation for `urlref') takes an optional second argument -% specifying the text to display. First (mandatory) arg is the url. -% Perhaps eventually put in a hypertex \special here. -% -\def\uref#1{\urefxxx #1,,\finish} -\def\urefxxx#1,#2,#3\finish{% - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \unhbox0\ (\code{#1})% - \else - \code{#1}% - \fi -} - -% rms does not like the angle brackets --karl, 17may97. -% So now @email is just like @uref. -%\def\email#1{\angleleft{\tt #1}\angleright} -\let\email=\uref - -% Check if we are currently using a typewriter font. Since all the -% Computer Modern typewriter fonts have zero interword stretch (and -% shrink), and it is reasonable to expect all typewriter fonts to have -% this property, we can check that font parameter. -% -\def\ifmonospace{\ifdim\fontdimen3\font=0pt } - -% Typeset a dimension, e.g., `in' or `pt'. The only reason for the -% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. -% -\def\dmn#1{\thinspace #1} - -\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} - -% @l was never documented to mean ``switch to the Lisp font'', -% and it is not used as such in any manual I can find. We need it for -% Polish suppressed-l. --karl, 22sep96. -%\def\l#1{{\li #1}\null} - -% Explicit font changes: @r, @sc, undocumented @ii. -\def\r#1{{\rm #1}} % roman font -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font - -% @acronym downcases the argument and prints in smallcaps. -\def\acronym#1{{\smallcaps \lowercase{#1}}} - -% @pounds{} is a sterling sign. -\def\pounds{{\it\$}} - - -\message{page headings,} - -\newskip\titlepagetopglue \titlepagetopglue = 1.5in -\newskip\titlepagebottomglue \titlepagebottomglue = 2pc - -% First the title page. Must do @settitle before @titlepage. -\newif\ifseenauthor -\newif\iffinishedtitlepage - -% Do an implicit @contents or @shortcontents after @end titlepage if the -% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. -% -\newif\ifsetcontentsaftertitlepage - \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue -\newif\ifsetshortcontentsaftertitlepage - \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue - -\def\shorttitlepage{\parsearg\shorttitlepagezzz} -\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} - -\def\titlepage{\begingroup \parindent=0pt \textfonts - \let\subtitlerm=\tenrm - \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% - % - \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% - % - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % - % Now you can print the title using @title. - \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefonts\rm ##1} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt}% - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Now you can put text using @subtitle. - \def\subtitle{\parsearg\subtitlezzz}% - \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% - % - % @author should come last, but may come many times. - \def\author{\parsearg\authorzzz}% - \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi - {\authorfont \leftline{##1}}}% - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - \oldpage - \let\page = \oldpage - \hbox{}}% -% \def\page{\oldpage \hbox{}} -} - -\def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - % - % If they want short, they certainly want long too. - \ifsetshortcontentsaftertitlepage - \shortcontents - \contents - \global\let\shortcontents = \relax - \global\let\contents = \relax - \fi - % - \ifsetcontentsaftertitlepage - \contents - \global\let\contents = \relax - \global\let\shortcontents = \relax - \fi - % - \HEADINGSon -} - -\def\finishtitlepage{% - \vskip4pt \hrule height 2pt width \hsize - \vskip\titlepagebottomglue - \finishedtitlepagetrue -} - -%%% Set up page headings and footings. - -\let\thispage=\folio - -\newtoks\evenheadline % headline on even pages -\newtoks\oddheadline % headline on odd pages -\newtoks\evenfootline % footline on even pages -\newtoks\oddfootline % footline on odd pages - -% Now make Tex use those variables -\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline - \else \the\evenheadline \fi}} -\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline - \else \the\evenfootline \fi}\HEADINGShook} -\let\HEADINGShook=\relax - -% Commands to set those variables. -% For example, this is what @headings on does -% @evenheading @thistitle|@thispage|@thischapter -% @oddheading @thischapter|@thispage|@thistitle -% @evenfooting @thisfile|| -% @oddfooting ||@thisfile - -\def\evenheading{\parsearg\evenheadingxxx} -\def\oddheading{\parsearg\oddheadingxxx} -\def\everyheading{\parsearg\everyheadingxxx} - -\def\evenfooting{\parsearg\evenfootingxxx} -\def\oddfooting{\parsearg\oddfootingxxx} -\def\everyfooting{\parsearg\everyfootingxxx} - -{\catcode`\@=0 % - -\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} -\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} -\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}% - -\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} -\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% -\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} -\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% - \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% - % - % Leave some space for the footline. Hopefully ok to assume - % @evenfooting will not be used by itself. - \global\advance\pageheight by -\baselineskip - \global\advance\vsize by -\baselineskip -} - -\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}} -% -}% unbind the catcode of @. - -% @headings double turns headings on for double-sided printing. -% @headings single turns headings on for single-sided printing. -% @headings off turns them off. -% @headings on same as @headings double, retained for compatibility. -% @headings after turns on double-sided headings after this page. -% @headings doubleafter turns on double-sided headings after this page. -% @headings singleafter turns on single-sided headings after this page. -% By default, they are off at the start of a document, -% and turned `on' after @end titlepage. - -\def\headings #1 {\csname HEADINGS#1\endcsname} - -\def\HEADINGSoff{ -\global\evenheadline={\hfil} \global\evenfootline={\hfil} -\global\oddheadline={\hfil} \global\oddfootline={\hfil}} -\HEADINGSoff -% When we turn headings on, set the page number to 1. -% For double-sided printing, put current file name in lower left corner, -% chapter name on inside top of right hand pages, document -% title on inside top of left hand pages, and page numbers on outside top -% edge of all pages. -\def\HEADINGSdouble{ -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chapoddpage -} -\let\contentsalignmacro = \chappager - -% For single-sided printing, chapter title goes across top left of page, -% page number on top right. -\def\HEADINGSsingle{ -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chappager -} -\def\HEADINGSon{\HEADINGSdouble} - -\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} -\let\HEADINGSdoubleafter=\HEADINGSafter -\def\HEADINGSdoublex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chapoddpage -} - -\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} -\def\HEADINGSsinglex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chappager -} - -% Subroutines used in generating headings -% Produces Day Month Year style of output. -\def\today{\number\day\space -\ifcase\month\or -January\or February\or March\or April\or May\or June\or -July\or August\or September\or October\or November\or December\fi -\space\number\year} - -% Use this if you want the Month Day, Year style of output. -%\def\today{\ifcase\month\or -%January\or February\or March\or April\or May\or June\or -%July\or August\or September\or October\or November\or December\fi -%\space\number\day, \number\year} - -% @settitle line... specifies the title of the document, for headings -% It generates no output of its own - -\def\thistitle{No Title} -\def\settitle{\parsearg\settitlezzz} -\def\settitlezzz #1{\gdef\thistitle{#1}} - - -\message{tables,} -% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x). - -% default indentation of table text -\newdimen\tableindent \tableindent=.8in -% default indentation of @itemize and @enumerate text -\newdimen\itemindent \itemindent=.3in -% margin between end of table item and start of table text. -\newdimen\itemmargin \itemmargin=.1in - -% used internally for \itemindent minus \itemmargin -\newdimen\itemmax - -% Note @table, @vtable, and @vtable define @item, @itemx, etc., with -% these defs. -% They also define \itemindex -% to index the item name in whatever manner is desired (perhaps none). - -\newif\ifitemxneedsnegativevskip - -\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} - -\def\internalBitem{\smallbreak \parsearg\itemzzz} -\def\internalBitemx{\itemxpar \parsearg\itemzzz} - -\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} -\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz} - -\def\internalBkitem{\smallbreak \parsearg\kitemzzz} -\def\internalBkitemx{\itemxpar \parsearg\kitemzzz} - -\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% - \itemzzz {#1}} - -\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% - \itemzzz {#1}} - -\def\itemzzz #1{\begingroup % - \advance\hsize by -\rightskip - \advance\hsize by -\tableindent - \setbox0=\hbox{\itemfont{#1}}% - \itemindex{#1}% - \nobreak % This prevents a break before @itemx. - % - % If the item text does not fit in the space we have, put it on a line - % by itself, and do not allow a page break either before or after that - % line. We do not start a paragraph here because then if the next - % command is, e.g., @kindex, the whatsit would get put into the - % horizontal list on a line by itself, resulting in extra blank space. - \ifdim \wd0>\itemmax - % - % Make this a paragraph so we get the \parskip glue and wrapping, - % but leave it ragged-right. - \begingroup - \advance\leftskip by-\tableindent - \advance\hsize by\tableindent - \advance\rightskip by0pt plus1fil - \leavevmode\unhbox0\par - \endgroup - % - % We're going to be starting a paragraph, but we don't want the - % \parskip glue -- logically it's part of the @item we just started. - \nobreak \vskip-\parskip - % - % Stop a page break at the \parskip glue coming up. Unfortunately - % we can't prevent a possible page break at the following - % \baselineskip glue. - \nobreak - \endgroup - \itemxneedsnegativevskipfalse - \else - % The item text fits into the space. Start a paragraph, so that the - % following text (if any) will end up on the same line. - \noindent - % Do this with kerns and \unhbox so that if there is a footnote in - % the item text, it can migrate to the main vertical list and - % eventually be printed. - \nobreak\kern-\tableindent - \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 - \unhbox0 - \nobreak\kern\dimen0 - \endgroup - \itemxneedsnegativevskiptrue - \fi -} - -\def\item{\errmessage{@item while not in a table}} -\def\itemx{\errmessage{@itemx while not in a table}} -\def\kitem{\errmessage{@kitem while not in a table}} -\def\kitemx{\errmessage{@kitemx while not in a table}} -\def\xitem{\errmessage{@xitem while not in a table}} -\def\xitemx{\errmessage{@xitemx while not in a table}} - -% Contains a kludge to get @end[description] to work. -\def\description{\tablez{\dontindex}{1}{}{}{}{}} - -% @table, @ftable, @vtable. -\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} -{\obeylines\obeyspaces% -\gdef\tablex #1^^M{% -\tabley\dontindex#1 \endtabley}} - -\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} -{\obeylines\obeyspaces% -\gdef\ftablex #1^^M{% -\tabley\fnitemindex#1 \endtabley -\def\Eftable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex} -{\obeylines\obeyspaces% -\gdef\vtablex #1^^M{% -\tabley\vritemindex#1 \endtabley -\def\Evtable{\endgraf\afterenvbreak\endgroup}% -\let\Etable=\relax}} - -\def\dontindex #1{} -\def\fnitemindex #1{\doind {fn}{\code{#1}}}% -\def\vritemindex #1{\doind {vr}{\code{#1}}}% - -{\obeyspaces % -\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% -\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} - -\def\tablez #1#2#3#4#5#6{% -\aboveenvbreak % -\begingroup % -\def\Edescription{\Etable}% Necessary kludge. -\let\itemindex=#1% -\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % -\ifnum 0#4>0 \tableindent=#4\mil \fi % -\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % -\def\itemfont{#2}% -\itemmax=\tableindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \tableindent % -\exdentamount=\tableindent -\parindent = 0pt -\parskip = \smallskipamount -\ifdim \parskip=0pt \parskip=2pt \fi% -\def\Etable{\endgraf\afterenvbreak\endgroup}% -\let\item = \internalBitem % -\let\itemx = \internalBitemx % -\let\kitem = \internalBkitem % -\let\kitemx = \internalBkitemx % -\let\xitem = \internalBxitem % -\let\xitemx = \internalBxitemx % -} - -% This is the counter used by @enumerate, which is really @itemize - -\newcount \itemno - -\def\itemize{\parsearg\itemizezzz} - -\def\itemizezzz #1{% - \begingroup % ended by the @end itemize - \itemizey {#1}{\Eitemize} -} - -\def\itemizey #1#2{% -\aboveenvbreak % -\itemmax=\itemindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \itemindent % -\exdentamount=\itemindent -\parindent = 0pt % -\parskip = \smallskipamount % -\ifdim \parskip=0pt \parskip=2pt \fi% -\def#2{\endgraf\afterenvbreak\endgroup}% -\def\itemcontents{#1}% -\let\item=\itemizeitem} - -% Set sfcode to normal for the chars that usually have another value. -% These are `.?!:;,' -\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 - \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } - -% \splitoff TOKENS\endmark defines \first to be the first token in -% TOKENS, and \rest to be the remainder. -% -\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% - -% Allow an optional argument of an uppercase letter, lowercase letter, -% or number, to specify the first label in the enumerated list. No -% argument is the same as `1'. -% -\def\enumerate{\parsearg\enumeratezzz} -\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} -\def\enumeratey #1 #2\endenumeratey{% - \begingroup % ended by the @end enumerate - % - % If we were given no argument, pretend we were given `1'. - \def\thearg{#1}% - \ifx\thearg\empty \def\thearg{1}\fi - % - % Detect if the argument is a single token. If so, it might be a - % letter. Otherwise, the only valid thing it can be is a number. - % (We will always have one token, because of the test we just made. - % This is a good thing, since \splitoff doesn't work given nothing at - % all -- the first parameter is undelimited.) - \expandafter\splitoff\thearg\endmark - \ifx\rest\empty - % Only one token in the argument. It could still be anything. - % A ``lowercase letter'' is one whose \lccode is nonzero. - % An ``uppercase letter'' is one whose \lccode is both nonzero, and - % not equal to itself. - % Otherwise, we assume it's a number. - % - % We need the \relax at the end of the \ifnum lines to stop TeX from - % continuing to look for a . - % - \ifnum\lccode\expandafter`\thearg=0\relax - \numericenumerate % a number (we hope) - \else - % It's a letter. - \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax - \lowercaseenumerate % lowercase letter - \else - \uppercaseenumerate % uppercase letter - \fi - \fi - \else - % Multiple tokens in the argument. We hope it's a number. - \numericenumerate - \fi -} - -% An @enumerate whose labels are integers. The starting integer is -% given in \thearg. -% -\def\numericenumerate{% - \itemno = \thearg - \startenumeration{\the\itemno}% -} - -% The starting (lowercase) letter is in \thearg. -\def\lowercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more lowercase letters in @enumerate; get a bigger - alphabet}% - \fi - \char\lccode\itemno - }% -} - -% The starting (uppercase) letter is in \thearg. -\def\uppercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more uppercase letters in @enumerate; get a bigger - alphabet} - \fi - \char\uccode\itemno - }% -} - -% Call itemizey, adding a period to the first argument and supplying the -% common last two arguments. Also subtract one from the initial value in -% \itemno, since @item increments \itemno. -% -\def\startenumeration#1{% - \advance\itemno by -1 - \itemizey{#1.}\Eenumerate\flushcr -} - -% @alphaenumerate and @capsenumerate are abbreviations for giving an arg -% to @enumerate. -% -\def\alphaenumerate{\enumerate{a}} -\def\capsenumerate{\enumerate{A}} -\def\Ealphaenumerate{\Eenumerate} -\def\Ecapsenumerate{\Eenumerate} - -% Definition of @item while inside @itemize. - -\def\itemizeitem{% -\advance\itemno by 1 -{\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{In hmode at itemizeitem}\fi -{\parskip=0in \hskip 0pt -\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% -\vadjust{\penalty 1200}}% -\flushcr} - -% @multitable macros -% Amy Hendrickson, 8/18/94, 3/6/96 -% -% @multitable ... @end multitable will make as many columns as desired. -% Contents of each column will wrap at width given in preamble. Width -% can be specified either with sample text given in a template line, -% or in percent of \hsize, the current width of text on page. - -% Table can continue over pages but will only break between lines. - -% To make preamble: -% -% Either define widths of columns in terms of percent of \hsize: -% @multitable @columnfractions .25 .3 .45 -% @item ... -% -% Numbers following @columnfractions are the percent of the total -% current hsize to be used for each column. You may use as many -% columns as desired. - - -% Or use a template: -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item ... -% using the widest term desired in each column. -% -% For those who want to use more than one line's worth of words in -% the preamble, break the line within one argument and it -% will parse correctly, i.e., -% -% @multitable {Column 1 template} {Column 2 template} {Column 3 -% template} -% Not: -% @multitable {Column 1 template} {Column 2 template} -% {Column 3 template} - -% Each new table line starts with @item, each subsequent new column -% starts with @tab. Empty columns may be produced by supplying @tab's -% with nothing between them for as many times as empty columns are needed, -% ie, @tab@tab@tab will produce two empty columns. - -% @item, @tab, @multitable or @end multitable do not need to be on their -% own lines, but it will not hurt if they are. - -% Sample multitable: - -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff -% @tab Many paragraphs of text may be used in any column. -% -% They will wrap at the width determined by the template. -% @item@tab@tab This will be in third column. -% @end multitable - -% Default dimensions may be reset by user. -% @multitableparskip is vertical space between paragraphs in table. -% @multitableparindent is paragraph indent in table. -% @multitablecolmargin is horizontal space to be left between columns. -% @multitablelinespace is space to leave between table items, baseline -% to baseline. -% 0pt means it depends on current normal line spacing. -% -\newskip\multitableparskip -\newskip\multitableparindent -\newdimen\multitablecolspace -\newskip\multitablelinespace -\multitableparskip=0pt -\multitableparindent=6pt -\multitablecolspace=12pt -\multitablelinespace=0pt - -% Macros used to set up halign preamble: -% -\let\endsetuptable\relax -\def\xendsetuptable{\endsetuptable} -\let\columnfractions\relax -\def\xcolumnfractions{\columnfractions} -\newif\ifsetpercent - -% #1 is the part of the @columnfraction before the decimal point, which -% is presumably either 0 or the empty string (but we don't check, we -% just throw it away). #2 is the decimal part, which we use as the -% percent of \hsize for this column. -\def\pickupwholefraction#1.#2 {% - \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% - \setuptable -} - -\newcount\colcount -\def\setuptable#1{% - \def\firstarg{#1}% - \ifx\firstarg\xendsetuptable - \let\go = \relax - \else - \ifx\firstarg\xcolumnfractions - \global\setpercenttrue - \else - \ifsetpercent - \let\go\pickupwholefraction - \else - \global\advance\colcount by 1 - \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; - % typically that is always in the input, anyway. - \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% - \fi - \fi - \ifx\go\pickupwholefraction - % Put the argument back for the \pickupwholefraction call, so - % we'll always have a period there to be parsed. - \def\go{\pickupwholefraction#1}% - \else - \let\go = \setuptable - \fi% - \fi - \go -} - -% multitable syntax -\def\tab{&\hskip1sp\relax} % 2/2/96 - % tiny skip here makes sure this column space is - % maintained, even if it is never used. - -% @multitable ... @end multitable definitions: -% -\def\multitable{\parsearg\dotable} -\def\dotable#1{\bgroup - \vskip\parskip - \let\item\crcr - \tolerance=9500 - \hbadness=9500 - \setmultitablespacing - \parskip=\multitableparskip - \parindent=\multitableparindent - \overfullrule=0pt - \global\colcount=0 - \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% - % - % To parse everything between @multitable and @item: - \setuptable#1 \endsetuptable - % - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. - \everycr{\noalign{% - % - % \filbreak%% keeps underfull box messages off when table breaks over pages. - % Maybe so, but it also creates really weird page breaks when the table - % breaks over pages. Wouldn't \vfil be better? Wait until the problem - % manifests itself, so it can be fixed for real --karl. - \global\colcount=0\relax}}% - % - % This preamble sets up a generic column definition, which will - % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and - % continue for many paragraphs if desired. - \halign\bgroup&\global\advance\colcount by 1\relax - \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip - \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace - \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr -} - -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. -\ifdim\multitablelinespace=0pt -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. -\else -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi -\ifdim\multitableparskip>\multitablelinespace -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi% -\ifdim\multitableparskip=0pt -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi} - - -\message{indexing,} -% Index generation facilities - -% Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} - -% \newindex {foo} defines an index named foo. -% It automatically defines \fooindex such that -% \fooindex ...rest of line... puts an entry in the index foo. -% It also defines \fooindfile to be the number of the output channel for -% the file that accumulates this index. The file's extension is foo. -% The name of an index should be no more than 2 characters long -% for the sake of vms. -% -\def\newindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 % Open the file - \fi - \expandafter\xdef\csname#1index\endcsname{% % Define @#1index - \noexpand\doindex{#1}} -} - -% @defindex foo == \newindex{foo} - -\def\defindex{\parsearg\newindex} - -% Define @defcodeindex, like @defindex except put all entries in @code. - -\def\newcodeindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 - \fi - \expandafter\xdef\csname#1index\endcsname{% - \noexpand\docodeindex{#1}} -} - -\def\defcodeindex{\parsearg\newcodeindex} - -% @synindex foo bar makes index foo feed into index bar. -% Do this instead of @defindex foo if you don't want it as a separate index. -% The \closeout helps reduce unnecessary open files; the limit on the -% Acorn RISC OS is a mere 16 files. -\def\synindex#1 #2 {% - \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname - \expandafter\closeout\csname#1indfile\endcsname - \expandafter\let\csname#1indfile\endcsname=\synindexfoo - \expandafter\xdef\csname#1index\endcsname{% define \xxxindex - \noexpand\doindex{#2}}% -} - -% @syncodeindex foo bar similar, but put all entries made for index foo -% inside @code. -\def\syncodeindex#1 #2 {% - \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname - \expandafter\closeout\csname#1indfile\endcsname - \expandafter\let\csname#1indfile\endcsname=\synindexfoo - \expandafter\xdef\csname#1index\endcsname{% define \xxxindex - \noexpand\docodeindex{#2}}% -} - -% Define \doindex, the driver for all \fooindex macros. -% Argument #1 is generated by the calling \fooindex macro, -% and it is "foo", the name of the index. - -% \doindex just uses \parsearg; it calls \doind for the actual work. -% This is because \doind is more useful to call from other macros. - -% There is also \dosubind {index}{topic}{subtopic} -% which makes an entry in a two-level index such as the operation index. - -\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} -\def\singleindexer #1{\doind{\indexname}{#1}} - -% like the previous two, but they put @code around the argument. -\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} -\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} - -\def\indexdummies{% -\def\ { }% -% Take care of the plain tex accent commands. -\def\"{\realbackslash "}% -\def\`{\realbackslash `}% -\def\'{\realbackslash '}% -\def\^{\realbackslash ^}% -\def\~{\realbackslash ~}% -\def\={\realbackslash =}% -\def\b{\realbackslash b}% -\def\c{\realbackslash c}% -\def\d{\realbackslash d}% -\def\u{\realbackslash u}% -\def\v{\realbackslash v}% -\def\H{\realbackslash H}% -% Take care of the plain tex special European modified letters. -\def\oe{\realbackslash oe}% -\def\ae{\realbackslash ae}% -\def\aa{\realbackslash aa}% -\def\OE{\realbackslash OE}% -\def\AE{\realbackslash AE}% -\def\AA{\realbackslash AA}% -\def\o{\realbackslash o}% -\def\O{\realbackslash O}% -\def\l{\realbackslash l}% -\def\L{\realbackslash L}% -\def\ss{\realbackslash ss}% -% Take care of texinfo commands likely to appear in an index entry. -% (Must be a way to avoid doing expansion at all, and thus not have to -% laboriously list every single command here.) -\def\@{@}% will be @@ when we switch to @ as escape char. -% Need these in case \tex is in effect and \{ is a \delimiter again. -% But can't use \lbracecmd and \rbracecmd because texindex assumes -% braces and backslashes are used only as delimiters. -\let\{ = \mylbrace -\let\} = \myrbrace -\def\_{{\realbackslash _}}% -\def\w{\realbackslash w }% -\def\bf{\realbackslash bf }% -%\def\rm{\realbackslash rm }% -\def\sl{\realbackslash sl }% -\def\sf{\realbackslash sf}% -\def\tt{\realbackslash tt}% -\def\gtr{\realbackslash gtr}% -\def\less{\realbackslash less}% -\def\hat{\realbackslash hat}% -\def\TeX{\realbackslash TeX}% -\def\dots{\realbackslash dots }% -\def\result{\realbackslash result}% -\def\equiv{\realbackslash equiv}% -\def\expansion{\realbackslash expansion}% -\def\print{\realbackslash print}% -\def\error{\realbackslash error}% -\def\point{\realbackslash point}% -\def\copyright{\realbackslash copyright}% -\def\tclose##1{\realbackslash tclose {##1}}% -\def\code##1{\realbackslash code {##1}}% -\def\uref##1{\realbackslash uref {##1}}% -\def\url##1{\realbackslash url {##1}}% -\def\env##1{\realbackslash env {##1}}% -\def\command##1{\realbackslash command {##1}}% -\def\option##1{\realbackslash option {##1}}% -\def\dotless##1{\realbackslash dotless {##1}}% -\def\samp##1{\realbackslash samp {##1}}% -\def\,##1{\realbackslash ,{##1}}% -\def\t##1{\realbackslash t {##1}}% -\def\r##1{\realbackslash r {##1}}% -\def\i##1{\realbackslash i {##1}}% -\def\b##1{\realbackslash b {##1}}% -\def\sc##1{\realbackslash sc {##1}}% -\def\cite##1{\realbackslash cite {##1}}% -\def\key##1{\realbackslash key {##1}}% -\def\file##1{\realbackslash file {##1}}% -\def\var##1{\realbackslash var {##1}}% -\def\kbd##1{\realbackslash kbd {##1}}% -\def\dfn##1{\realbackslash dfn {##1}}% -\def\emph##1{\realbackslash emph {##1}}% -\def\acronym##1{\realbackslash acronym {##1}}% -% -% Handle some cases of @value -- where the variable name does not -% contain - or _, and the value does not contain any -% (non-fully-expandable) commands. -\let\value = \expandablevalue -% -\unsepspaces -} - -% If an index command is used in an @example environment, any spaces -% therein should become regular spaces in the raw index file, not the -% expansion of \tie (\\leavevmode \penalty \@M \ ). -{\obeyspaces - \gdef\unsepspaces{\obeyspaces\let =\space}} - -% \indexnofonts no-ops all font-change commands. -% This is used when outputting the strings to sort the index by. -\def\indexdummyfont#1{#1} -\def\indexdummytex{TeX} -\def\indexdummydots{...} - -\def\indexnofonts{% -% Just ignore accents. -\let\,=\indexdummyfont -\let\"=\indexdummyfont -\let\`=\indexdummyfont -\let\'=\indexdummyfont -\let\^=\indexdummyfont -\let\~=\indexdummyfont -\let\==\indexdummyfont -\let\b=\indexdummyfont -\let\c=\indexdummyfont -\let\d=\indexdummyfont -\let\u=\indexdummyfont -\let\v=\indexdummyfont -\let\H=\indexdummyfont -\let\dotless=\indexdummyfont -% Take care of the plain tex special European modified letters. -\def\oe{oe}% -\def\ae{ae}% -\def\aa{aa}% -\def\OE{OE}% -\def\AE{AE}% -\def\AA{AA}% -\def\o{o}% -\def\O{O}% -\def\l{l}% -\def\L{L}% -\def\ss{ss}% -\let\w=\indexdummyfont -\let\t=\indexdummyfont -\let\r=\indexdummyfont -\let\i=\indexdummyfont -\let\b=\indexdummyfont -\let\emph=\indexdummyfont -\let\strong=\indexdummyfont -\let\cite=\indexdummyfont -\let\sc=\indexdummyfont -%Don't no-op \tt, since it isn't a user-level command -% and is used in the definitions of the active chars like <, >, |... -%\let\tt=\indexdummyfont -\let\tclose=\indexdummyfont -\let\code=\indexdummyfont -\let\url=\indexdummyfont -\let\uref=\indexdummyfont -\let\env=\indexdummyfont -\let\command=\indexdummyfont -\let\option=\indexdummyfont -\let\file=\indexdummyfont -\let\samp=\indexdummyfont -\let\kbd=\indexdummyfont -\let\key=\indexdummyfont -\let\var=\indexdummyfont -\let\TeX=\indexdummytex -\let\dots=\indexdummydots -\def\@{@}% -} - -% To define \realbackslash, we must make \ not be an escape. -% We must first make another character (@) an escape -% so we do not become unable to do a definition. - -{\catcode`\@=0 \catcode`\\=\other - @gdef@realbackslash{\}} - -\let\indexbackslash=0 %overridden during \printindex. -\let\SETmarginindex=\relax % put index entries in margin (undocumented)? - -% For \ifx comparisons. -\def\emptymacro{\empty} - -% Most index entries go through here, but \dosubind is the general case. -% -\def\doind#1#2{\dosubind{#1}{#2}\empty} - -% Workhorse for all \fooindexes. -% #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% \empty if called from \doind, as we usually are. The main exception -% is with defuns, which call us directly. -% -\def\dosubind#1#2#3{% - % Put the index entry in the margin if desired. - \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}% - \fi - {% - \count255=\lastpenalty - {% - \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ - {% - \let\folio = 0% We will expand all macros now EXCEPT \folio. - \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - \def\thirdarg{#3}% - % - % If third arg is present, precede it with space in sort key. - \ifx\thirdarg\emptymacro - \let\subentry = \empty - \else - \def\subentry{ #3}% - \fi - % - % First process the index-string with all font commands turned off - % to get the string to sort by. - {\indexnofonts \xdef\indexsorttmp{#2\subentry}}% - % - % Now produce the complete index entry, with both the sort key and the - % original text, including any font commands. - \toks0 = {#2}% - \edef\temp{% - \write\csname#1indfile\endcsname{% - \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}% - }% - % - % If third (subentry) arg is present, add it to the index string. - \ifx\thirdarg\emptymacro \else - \toks0 = {#3}% - \edef\temp{\temp{\the\toks0}}% - \fi - % - % If a skip is the last thing on the list now, preserve it - % by backing up by \lastskip, doing the \write, then inserting - % the skip again. Otherwise, the whatsit generated by the - % \write will make \lastskip zero. The result is that sequences - % like this: - % @end defun - % @tindex whatever - % @defun ... - % will have extra space inserted, because the \medbreak in the - % start of the @defun won't see the skip inserted by the @end of - % the previous defun. - % - % But don't do any of this if we're not in vertical mode. We - % don't want to do a \vskip and prematurely end a paragraph. - % - % Avoid page breaks due to these extra skips, too. - % - \iflinks - \ifvmode - \skip0 = \lastskip - \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi - \fi - % - \temp % do the write - % - % - \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi - \fi - }% - }% - \penalty\count255 - }% -} - -% The index entry written in the file actually looks like -% \entry {sortstring}{page}{topic} -% or -% \entry {sortstring}{page}{topic}{subtopic} -% The texindex program reads in these files and writes files -% containing these kinds of lines: -% \initial {c} -% before the first topic whose initial is c -% \entry {topic}{pagelist} -% for a topic that is used without subtopics -% \primary {topic} -% for the beginning of a topic that is used with subtopics -% \secondary {subtopic}{pagelist} -% for each subtopic. - -% Define the user-accessible indexing commands -% @findex, @vindex, @kindex, @cindex. - -\def\findex {\fnindex} -\def\kindex {\kyindex} -\def\cindex {\cpindex} -\def\vindex {\vrindex} -\def\tindex {\tpindex} -\def\pindex {\pgindex} - -\def\cindexsub {\begingroup\obeylines\cindexsub} -{\obeylines % -\gdef\cindexsub "#1" #2^^M{\endgroup % -\dosubind{cp}{#2}{#1}}} - -% Define the macros used in formatting output of the sorted index material. - -% @printindex causes a particular index (the ??s file) to get printed. -% It does not print any chapter heading (usually an @unnumbered). -% -\def\printindex{\parsearg\doprintindex} -\def\doprintindex#1{\begingroup - \dobreak \chapheadingskip{10000}% - % - \indexfonts \rm - \tolerance = 9500 - \indexbreaks - % - % See if the index file exists and is nonempty. - % Change catcode of @ here so that if the index file contains - % \initial {@} - % as its first line, TeX doesn't complain about mismatched braces - % (because it thinks @} is a control sequence). - \catcode`\@ = 11 - \openin 1 \jobname.#1s - \ifeof 1 - % \enddoublecolumns gets confused if there is no text in the index, - % and it loses the chapter title and the aux file entries for the - % index. The easiest way to prevent this problem is to make sure - % there is some text. - (Index is nonexistent) - \else - % - % If the index file exists but is empty, then \openin leaves \ifeof - % false. We have to make TeX try to read something from the file, so - % it can discover if there is anything in it. - \read 1 to \temp - \ifeof 1 - (Index is empty) - \else - % Index files are almost Texinfo source, but we use \ as the escape - % character. It would be better to use @, but that's too big a change - % to make right now. - \def\indexbackslash{\rawbackslashxx}% - \catcode`\\ = 0 - \escapechar = `\\ - \begindoublecolumns - \input \jobname.#1s - \enddoublecolumns - \fi - \fi - \closein 1 -\endgroup} - -% These macros are used by the sorted index file itself. -% Change them to control the appearance of the index. - -\def\initial#1{{% - % Some minor font changes for the special characters. - \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt - % - % Remove any glue we may have, we'll be inserting our own. - \removelastskip - % - % We like breaks before the index initials, so insert a bonus. - \penalty -300 - % - % Typeset the initial. Making this add up to a whole number of - % baselineskips increases the chance of the dots lining up from column - % to column. It still won't often be perfect, because of the stretch - % we need before each entry, but it's better. - % - % No shrink because it confuses \balancecolumns. - \vskip 1.67\baselineskip plus .5\baselineskip - \leftline{\secbf #1}% - \vskip .33\baselineskip plus .1\baselineskip - % - % Do our best not to break after the initial. - \nobreak -}} - -% This typesets a paragraph consisting of #1, dot leaders, and then #2 -% flush to the right margin. It is used for index and table of contents -% entries. The paragraph is indented by \leftskip. -% -\def\entry#1#2{\begingroup - % - % Start a new paragraph if necessary, so our assignments below can't - % affect previous text. - \par - % - % Do not fill out the last line with white space. - \parfillskip = 0in - % - % No extra space above this paragraph. - \parskip = 0in - % - % Do not prefer a separate line ending with a hyphen to fewer lines. - \finalhyphendemerits = 0 - % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. - % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em - % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil - % - % A bit of stretch before each entry for the benefit of balancing columns. - \vskip 0pt plus1pt - % - % Start a ``paragraph'' for the index entry so the line breaking - % parameters we've set above will have an effect. - \noindent - % - % Insert the text of the index entry. TeX will do line-breaking on it. - #1% - % The following is kludged to not output a line of dots in the index if - % there are no page numbers. The next person who breaks this will be - % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#2}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd\ \else% - % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 - \null\nobreak\indexdotfill % Have leaders before the page number. - % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. - \ #2% The page number ends the paragraph. - \fi% - \par -\endgroup} - -% Like \dotfill except takes at least 1 em. -\def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} - -\def\primary #1{\line{#1\hfil}} - -\newskip\secondaryindent \secondaryindent=0.5cm - -\def\secondary #1#2{ -{\parfillskip=0in \parskip=0in -\hangindent =1in \hangafter=1 -\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par -}} - -% Define two-column mode, which we use to typeset indexes. -% Adapted from the TeXbook, page 416, which is to say, -% the manmac.tex format used to print the TeXbook itself. -\catcode`\@=11 - -\newbox\partialpage -\newdimen\doublecolumnhsize - -\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns - % Grab any single-column material above us. - \output = {\global\setbox\partialpage = \vbox{% - % - % Here is a possibility not foreseen in manmac: if we accumulate a - % whole lot of material, we might end up calling this \output - % routine twice in a row (see the doublecol-lose test, which is - % essentially a couple of indexes with @setchapternewpage off). In - % that case, we must prevent the second \partialpage from - % simply overwriting the first, causing us to lose the page. - % This will preserve it until a real output routine can ship it - % out. Generally, \partialpage will be empty when this runs and - % this will be a no-op. - \unvbox\partialpage - % - % Unvbox the main output page. - \unvbox255 - \kern-\topskip \kern\baselineskip - }}% - \eject % run that output routine to set \partialpage - % - % Use the double-column output routine for subsequent pages. - \output = {\doublecolumnout}% - % - % Change the page size parameters. We could do this once outside this - % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 - % format, but then we repeat the same computation. Repeating a couple - % of assignments once per index is clearly meaningless for the - % execution time, so we may as well do it in one place. - % - % First we halve the line length, less a little for the gutter between - % the columns. We compute the gutter based on the line length, so it - % changes automatically with the paper format. The magic constant - % below is chosen so that the gutter has the same value (well, +-<1pt) - % as it did when we hard-coded it. - % - % We put the result in a separate register, \doublecolumhsize, so we - % can restore it in \pagesofar, after \hsize itself has (potentially) - % been clobbered. - % - \doublecolumnhsize = \hsize - \advance\doublecolumnhsize by -.04154\hsize - \divide\doublecolumnhsize by 2 - \hsize = \doublecolumnhsize - % - % Double the \vsize as well. (We don't need a separate register here, - % since nobody clobbers \vsize.) - \advance\vsize by -\ht\partialpage - \vsize = 2\vsize -} - -% The double-column output routine for all double-column pages except -% the last. -% -\def\doublecolumnout{% - \splittopskip=\topskip \splitmaxdepth=\maxdepth - % Get the available space for the double columns -- the normal - % (undoubled) page height minus any material left over from the - % previous page. - \dimen@ = \vsize - \divide\dimen@ by 2 - % - % box0 will be the left-hand column, box2 the right. - \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ - \onepageout\pagesofar - \unvbox255 - \penalty\outputpenalty -} -\def\pagesofar{% - % Re-output the contents of the output page -- any previous material, - % followed by the two boxes we just split, in box0 and box2. - \advance\vsize by \ht\partialpage - \unvbox\partialpage - % - \hsize = \doublecolumnhsize - \wd0=\hsize \wd2=\hsize - \hbox to\pagewidth{\box0\hfil\box2}% -} -\def\enddoublecolumns{% - \output = {% - % Split the last of the double-column material. Leave it on the - % current page, no automatic page break. - \balancecolumns - % - % If we end up splitting too much material for the current page, - % though, there will be another page break right after this \output - % invocation ends. Having called \balancecolumns once, we do not - % want to call it again. Therefore, reset \output to its normal - % definition right away. (We hope \balancecolumns will never be - % called on to balance too much material, but if it is, this makes - % the output somewhat more palatable.) - \global\output = {\onepageout{\pagecontents\PAGE}}% - }% - \eject - \endgroup % started in \begindoublecolumns - % - % \pagegoal was set to the doubled \vsize above, since we restarted - % the current page. We're now back to normal single-column - % typesetting, so reset \pagegoal to the normal \vsize (after the - % \endgroup where \vsize got restored). - \pagegoal = \vsize -} -\def\balancecolumns{% - % Called at the end of the double column material. - \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. - \dimen@ = \ht0 - \advance\dimen@ by \topskip - \advance\dimen@ by-\baselineskip - \divide\dimen@ by 2 % target to split to - %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% - \splittopskip = \topskip - % Loop until we get a decent breakpoint. - {% - \vbadness = 10000 - \loop - \global\setbox3 = \copy0 - \global\setbox1 = \vsplit3 to \dimen@ - \ifdim\ht3>\dimen@ - \global\advance\dimen@ by 1pt - \repeat - }% - %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% - \setbox0=\vbox to\dimen@{\unvbox1}% - \setbox2=\vbox to\dimen@{\unvbox3}% - % - \pagesofar -} -\catcode`\@ = \other - - -\message{sectioning,} -% Define chapters, sections, etc. - -\newcount\chapno -\newcount\secno \secno=0 -\newcount\subsecno \subsecno=0 -\newcount\subsubsecno \subsubsecno=0 - -% This counter is funny since it counts through charcodes of letters A, B, ... -\newcount\appendixno \appendixno = `\@ -\def\appendixletter{\char\the\appendixno} - -% Each @chapter defines this as the name of the chapter. -% page headings and footings can use it. @section does likewise. -\def\thischapter{} -\def\thissection{} - -\newcount\absseclevel % used to calculate proper heading level -\newcount\secbase\secbase=0 % @raise/lowersections modify this count - -% @raisesections: treat @section as chapter, @subsection as section, etc. -\def\raisesections{\global\advance\secbase by -1} -\let\up=\raisesections % original BFox name - -% @lowersections: treat @chapter as section, @section as subsection, etc. -\def\lowersections{\global\advance\secbase by 1} -\let\down=\lowersections % original BFox name - -% Choose a numbered-heading macro -% #1 is heading level if unmodified by @raisesections or @lowersections -% #2 is text for heading -\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \chapterzzz{#2} -\or - \seczzz{#2} -\or - \numberedsubseczzz{#2} -\or - \numberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \chapterzzz{#2} - \else - \numberedsubsubseczzz{#2} - \fi -\fi -} - -% like \numhead, but chooses appendix heading levels -\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \appendixzzz{#2} -\or - \appendixsectionzzz{#2} -\or - \appendixsubseczzz{#2} -\or - \appendixsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \appendixzzz{#2} - \else - \appendixsubsubseczzz{#2} - \fi -\fi -} - -% like \numhead, but chooses numberless heading levels -\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \unnumberedzzz{#2} -\or - \unnumberedseczzz{#2} -\or - \unnumberedsubseczzz{#2} -\or - \unnumberedsubsubseczzz{#2} -\else - \ifnum \absseclevel<0 - \unnumberedzzz{#2} - \else - \unnumberedsubsubseczzz{#2} - \fi -\fi -} - -% @chapter, @appendix, @unnumbered. -\def\thischaptername{No Chapter Title} -\outer\def\chapter{\parsearg\chapteryyy} -\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}% -\chapmacro {#1}{\the\chapno}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -% We don't substitute the actual chapter name into \thischapter -% because we don't want its macros evaluated now. -\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% - {\the\chapno}}}% -\temp -\donoderef -\global\let\section = \numberedsec -\global\let\subsection = \numberedsubsec -\global\let\subsubsection = \numberedsubsubsec -} - -\outer\def\appendix{\parsearg\appendixyyy} -\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \appendixno by 1 -\message{\putwordAppendix\space \appendixletter}% -\chapmacro {#1}{\putwordAppendix{} \appendixletter}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}% - {\putwordAppendix{} \appendixletter}}}% -\temp -\appendixnoderef -\global\let\section = \appendixsec -\global\let\subsection = \appendixsubsec -\global\let\subsubsection = \appendixsubsubsec -} - -% @centerchap is like @unnumbered, but the heading is centered. -\outer\def\centerchap{\parsearg\centerchapyyy} -\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}} - -% @top is like @unnumbered. -\outer\def\top{\parsearg\unnumberedyyy} - -\outer\def\unnumbered{\parsearg\unnumberedyyy} -\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz #1{% -\secno=0 \subsecno=0 \subsubsecno=0 -% -% This used to be simply \message{#1}, but TeX fully expands the -% argument to \message. Therefore, if #1 contained @-commands, TeX -% expanded them. For example, in `@unnumbered The @cite{Book}', TeX -% expanded @cite (which turns out to cause errors because \cite is meant -% to be executed, not expanded). -% -% Anyway, we don't want the fully-expanded definition of @cite to appear -% as a result of the \message, we just want `@cite' itself. We use -% \the to achieve this: TeX expands \the only once, -% simply yielding the contents of . (We also do this for -% the toc entries.) -\toks0 = {#1}\message{(\the\toks0)}% -% -\unnumbchapmacro {#1}% -\gdef\thischapter{#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}% -\temp -\unnumbnoderef -\global\let\section = \unnumberedsec -\global\let\subsection = \unnumberedsubsec -\global\let\subsubsection = \unnumberedsubsubsec -} - -% Sections. -\outer\def\numberedsec{\parsearg\secyyy} -\def\secyyy #1{\numhead1{#1}} % normally calls seczzz -\def\seczzz #1{% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% - {\the\chapno}{\the\secno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsection{\parsearg\appendixsecyyy} -\outer\def\appendixsec{\parsearg\appendixsecyyy} -\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz #1{% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}% - {\appendixletter}{\the\secno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy} -\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz #1{% -\plainsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak -} - -% Subsections. -\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy} -\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz #1{% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% - {\the\chapno}{\the\secno}{\the\subsecno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy} -\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz #1{% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}% - {\appendixletter}{\the\secno}{\the\subsecno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy} -\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz #1{% -\plainsubsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry% - {\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak -} - -% Subsubsections. -\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy} -\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz #1{% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% -\temp -\donoderef -\nobreak -} - -\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy} -\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz #1{% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}% - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}% -\temp -\appendixnoderef -\nobreak -} - -\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy} -\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz #1{% -\plainsubsubsecheading {#1}\gdef\thissection{#1}% -\toks0 = {#1}% -\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry% - {\the\toks0}}}% -\temp -\unnumbnoderef -\nobreak -} - -% These are variants which are not "outer", so they can appear in @ifinfo. -% Actually, they should now be obsolete; ordinary section commands should work. -\def\infotop{\parsearg\unnumberedzzz} -\def\infounnumbered{\parsearg\unnumberedzzz} -\def\infounnumberedsec{\parsearg\unnumberedseczzz} -\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} - -\def\infoappendix{\parsearg\appendixzzz} -\def\infoappendixsec{\parsearg\appendixseczzz} -\def\infoappendixsubsec{\parsearg\appendixsubseczzz} -\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} - -\def\infochapter{\parsearg\chapterzzz} -\def\infosection{\parsearg\sectionzzz} -\def\infosubsection{\parsearg\subsectionzzz} -\def\infosubsubsection{\parsearg\subsubsectionzzz} - -% These macros control what the section commands do, according -% to what kind of chapter we are in (ordinary, appendix, or unnumbered). -% Define them by default for a numbered chapter. -\global\let\section = \numberedsec -\global\let\subsection = \numberedsubsec -\global\let\subsubsection = \numberedsubsubsec - -% Define @majorheading, @heading and @subheading - -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - - -\def\majorheading{\parsearg\majorheadingzzz} -\def\majorheadingzzz #1{% -{\advance\chapheadingskip by 10pt \chapbreak }% -{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} - -\def\chapheading{\parsearg\chapheadingzzz} -\def\chapheadingzzz #1{\chapbreak % -{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\penalty 200} - -% @heading, @subheading, @subsubheading. -\def\heading{\parsearg\plainsecheading} -\def\subheading{\parsearg\plainsubsecheading} -\def\subsubheading{\parsearg\plainsubsubsecheading} - -% These macros generate a chapter, section, etc. heading only -% (including whitespace, linebreaking, etc. around it), -% given all the information in convenient, parsed form. - -%%% Args are the skip and penalty (usually negative) -\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} - -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} - -%%% Define plain chapter starts, and page on/off switching for it -% Parameter controlling skip before chapter headings (if needed) - -\newskip\chapheadingskip - -\def\chapbreak{\dobreak \chapheadingskip {-4000}} -\def\chappager{\par\vfill\supereject} -\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} - -\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} - -\def\CHAPPAGoff{% -\global\let\contentsalignmacro = \chappager -\global\let\pchapsepmacro=\chapbreak -\global\let\pagealignmacro=\chappager} - -\def\CHAPPAGon{% -\global\let\contentsalignmacro = \chappager -\global\let\pchapsepmacro=\chappager -\global\let\pagealignmacro=\chappager -\global\def\HEADINGSon{\HEADINGSsingle}} - -\def\CHAPPAGodd{ -\global\let\contentsalignmacro = \chapoddpage -\global\let\pchapsepmacro=\chapoddpage -\global\let\pagealignmacro=\chapoddpage -\global\def\HEADINGSon{\HEADINGSdouble}} - -\CHAPPAGon - -\def\CHAPFplain{ -\global\let\chapmacro=\chfplain -\global\let\unnumbchapmacro=\unnchfplain -\global\let\centerchapmacro=\centerchfplain} - -% Plain chapter opening. -% #1 is the text, #2 the chapter number or empty if unnumbered. -\def\chfplain#1#2{% - \pchapsepmacro - {% - \chapfonts \rm - \def\chapnum{#2}% - \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}% - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 \centerparametersmaybe - \unhbox0 #1\par}% - }% - \nobreak\bigskip % no page break after a chapter title - \nobreak -} - -% Plain opening for unnumbered. -\def\unnchfplain#1{\chfplain{#1}{}} - -% @centerchap -- centered and unnumbered. -\let\centerparametersmaybe = \relax -\def\centerchfplain#1{{% - \def\centerparametersmaybe{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt - }% - \chfplain{#1}{}% -}} - -\CHAPFplain % The default - -\def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\nobreak -} - -\def\chfopen #1#2{\chapoddpage {\chapfonts -\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% -\par\penalty 5000 % -} - -\def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rm #1}\hfill}}\bigskip \par\nobreak -} - -\def\CHAPFopen{ -\global\let\chapmacro=\chfopen -\global\let\unnumbchapmacro=\unnchfopen -\global\let\centerchapmacro=\centerchfopen} - - -% Section titles. -\newskip\secheadingskip -\def\secheadingbreak{\dobreak \secheadingskip {-1000}} -\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}} -\def\plainsecheading#1{\sectionheading{sec}{}{#1}} - -% Subsection titles. -\newskip \subsecheadingskip -\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} -\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}} -\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}} - -% Subsubsection titles. -\let\subsubsecheadingskip = \subsecheadingskip -\let\subsubsecheadingbreak = \subsecheadingbreak -\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}} -\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}} - - -% Print any size section title. -% -% #1 is the section type (sec/subsec/subsubsec), #2 is the section -% number (maybe empty), #3 the text. -\def\sectionheading#1#2#3{% - {% - \expandafter\advance\csname #1headingskip\endcsname by \parskip - \csname #1headingbreak\endcsname - }% - {% - % Switch to the right set of fonts. - \csname #1fonts\endcsname \rm - % - % Only insert the separating space if we have a section number. - \def\secnum{#2}% - \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}% - % - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent = \wd0 % zero if no section number - \unhbox0 #3}% - }% - \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak -} - - -\message{toc,} -\newwrite\tocfile - -% Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. We supply {\folio} at the end of the -% argument, which will end up as the last argument to the \...entry macro. -% -% We open the .toc file here instead of at @setfilename or any other -% given time so that @contents can be put in the document anywhere. -% -\newif\iftocfileopened -\def\writetocentry#1{% - \iftocfileopened\else - \immediate\openout\tocfile = \jobname.toc - \global\tocfileopenedtrue - \fi - \iflinks \write\tocfile{#1{\folio}}\fi -} - -\newskip\contentsrightmargin \contentsrightmargin=1in -\newcount\savepageno -\newcount\lastnegativepageno \lastnegativepageno = -1 - -% Finish up the main text and prepare to read what we've written -% to \tocfile. -% -\def\startcontents#1{% - % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund - \contentsalignmacro - \immediate\closeout\tocfile - % - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \unnumbchapmacro{#1}\def\thischapter{}% - \savepageno = \pageno - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. - % - % Roman numerals for page numbers. - \ifnum \pageno>0 \pageno = \lastnegativepageno \fi -} - - -% Normal (long) toc. -\def\contents{% - \startcontents{\putwordTableofContents}% - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \endgroup - \lastnegativepageno = \pageno - \pageno = \savepageno -} - -% And just the chapters. -\def\summarycontents{% - \startcontents{\putwordShortContents}% - % - \let\chapentry = \shortchapentry - \let\unnumbchapentry = \shortunnumberedentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl - \rm - \hyphenpenalty = 10000 - \advance\baselineskip by 1pt % Open it up a little. - \def\secentry ##1##2##3##4{} - \def\unnumbsecentry ##1##2{} - \def\subsecentry ##1##2##3##4##5{} - \def\unnumbsubsecentry ##1##2{} - \def\subsubsecentry ##1##2##3##4##5##6{} - \def\unnumbsubsubsecentry ##1##2{} - \openin 1 \jobname.toc - \ifeof 1 \else - \closein 1 - \input \jobname.toc - \fi - \vfill \eject - \endgroup - \lastnegativepageno = \pageno - \pageno = \savepageno -} -\let\shortcontents = \summarycontents - -% These macros generate individual entries in the table of contents. -% The first argument is the chapter or section name. -% The last argument is the page number. -% The arguments in between are the chapter number, section number, ... - -% Chapter-level things, for both the long and short contents. -\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} - -% See comments in \dochapentry re vbox and related settings -\def\shortchapentry#1#2#3{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}% -} - -% Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter. -% We could simplify the code here by writing out an \appendixentry -% command in the toc file for appendices, instead of using \chapentry -% for both, but it doesn't seem worth it. -\setbox0 = \hbox{\shortcontrm \putwordAppendix } -\newdimen\shortappendixwidth \shortappendixwidth = \wd0 - -\def\shortchaplabel#1{% - % We typeset #1 in a box of constant width, regardless of the text of - % #1, so the chapter titles will come out aligned. - \setbox0 = \hbox{#1}% - \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi - % - % This space should be plenty, since a single number is .5em, and the - % widest letter (M) is 1em, at least in the Computer Modern fonts. - % (This space doesn't include the extra space that gets added after - % the label; that gets put in by \shortchapentry above.) - \advance\dimen0 by 1.1em - \hbox to \dimen0{#1\hfil}% -} - -\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} -\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}} - -% Sections. -\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} -\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} - -% Subsections. -\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} -\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} - -% And subsubsections. -\def\subsubsecentry#1#2#3#4#5#6{% - \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} -\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} - -% This parameter controls the indentation of the various levels. -\newdimen\tocindent \tocindent = 3pc - -% Now for the actual typesetting. In all these, #1 is the text and #2 is the -% page number. -% -% If the toc has to be broken over pages, we want it to be at chapters -% if at all possible; hence the \penalty. -\def\dochapentry#1#2{% - \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip - \begingroup - \chapentryfonts - \tocentry{#1}{\dopageno{#2}}% - \endgroup - \nobreak\vskip .25\baselineskip plus.1\baselineskip -} - -\def\dosecentry#1#2{\begingroup - \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno{#2}}% -\endgroup} - -\def\dosubsecentry#1#2{\begingroup - \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno{#2}}% -\endgroup} - -\def\dosubsubsecentry#1#2{\begingroup - \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno{#2}}% -\endgroup} - -% Final typesetting of a toc entry; we use the same \entry macro as for -% the index entries, but we want to suppress hyphenation here. (We -% can't do that in the \entry macro, since index entries might consist -% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.) -\def\tocentry#1#2{\begingroup - \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks - % Do not use \turnoffactive in these arguments. Since the toc is - % typeset in cmr, so characters such as _ would come out wrong; we - % have to do the usual translation tricks. - \entry{#1}{#2}% -\endgroup} - -% Space between chapter (or whatever) number and the title. -\def\labelspace{\hskip1em \relax} - -\def\dopageno#1{{\rm #1}} -\def\doshortpageno#1{{\rm #1}} - -\def\chapentryfonts{\secfonts \rm} -\def\secentryfonts{\textfonts} -\let\subsecentryfonts = \textfonts -\let\subsubsecentryfonts = \textfonts - - -\message{environments,} - -% Since these characters are used in examples, it should be an even number of -% \tt widths. Each \tt character is 1en, so two makes it 1em. -% Furthermore, these definitions must come after we define our fonts. -\newbox\dblarrowbox \newbox\longdblarrowbox -\newbox\pushcharbox \newbox\bullbox -\newbox\equivbox \newbox\errorbox - -%{\tentt -%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil} -%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil} -%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil} -%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil} -% Adapted from the manmac format (p.420 of TeXbook) -%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex -% depth .1ex\hfil} -%} - -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. -\def\point{$\star$} -\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} -\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} -\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} -\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} - -% Adapted from the TeXbook's \boxit. -{\tentt \global\dimen0 = 3em}% Width of the box. -\dimen2 = .55pt % Thickness of rules -% The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} - -\global\setbox\errorbox=\hbox to \dimen0{\hfil - \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. - \advance\hsize by -2\dimen2 % Rules. - \vbox{ - \hrule height\dimen2 - \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. - \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. - \kern3pt\vrule width\dimen2}% Space to right. - \hrule height\dimen2} - \hfil} - -% The @error{} command. -\def\error{\leavevmode\lower.7ex\copy\errorbox} - -% @tex ... @end tex escapes into raw Tex temporarily. -% One exception: @ is still an escape character, so that @end tex works. -% But \@ or @@ will get a plain tex @ character. - -\def\tex{\begingroup - \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 - \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 - \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie - \catcode `\%=14 - \catcode 43=12 % plus - \catcode`\"=12 - \catcode`\==12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 - \escapechar=`\\ - % - \let\b=\ptexb - \let\bullet=\ptexbullet - \let\c=\ptexc - \let\,=\ptexcomma - \let\.=\ptexdot - \let\dots=\ptexdots - \let\equiv=\ptexequiv - \let\!=\ptexexclam - \let\i=\ptexi - \let\{=\ptexlbrace - \let\+=\tabalign - \let\}=\ptexrbrace - \let\*=\ptexstar - \let\t=\ptext - % - \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% - \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% - \def\@{@}% -\let\Etex=\endgroup} - -% Define @lisp ... @endlisp. -% @lisp does a \begingroup so it can rebind things, -% including the definition of @endlisp (which normally is erroneous). - -% Amount to narrow the margins by for @lisp. -\newskip\lispnarrowing \lispnarrowing=0.4in - -% This is the definition that ^^M gets inside @lisp, @example, and other -% such environments. \null is better than a space, since it doesn't -% have any width. -\def\lisppar{\null\endgraf} - -% Make each space character in the input produce a normal interword -% space in the output. Don't allow a line break at this space, as this -% is used only in environments like @example, where each line of input -% should produce a line of output anyway. -% -{\obeyspaces % -\gdef\sepspaces{\obeyspaces\let =\tie}} - -% Define \obeyedspace to be our active space, whatever it is. This is -% for use in \parsearg. -{\sepspaces% -\global\let\obeyedspace= } - -% This space is always present above and below environments. -\newskip\envskipamount \envskipamount = 0pt - -% Make spacing and below environment symmetrical. We use \parskip here -% to help in doing that, since in @example-like environments \parskip -% is reset to zero; thus the \afterenvbreak inserts no space -- but the -% start of the next paragraph will insert \parskip -% -\def\aboveenvbreak{{\advance\envskipamount by \parskip -\endgraf \ifdim\lastskip<\envskipamount -\removelastskip \penalty-50 \vskip\envskipamount \fi}} - -\let\afterenvbreak = \aboveenvbreak - -% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. -\let\nonarrowing=\relax - -% @cartouche ... @end cartouche: draw rectangle w/rounded corners around -% environment contents. -\font\circle=lcircle10 -\newdimen\circthick -\newdimen\cartouter\newdimen\cartinner -\newskip\normbskip\newskip\normpskip\newskip\normlskip -\circthick=\fontdimen8\circle -% -\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth -\def\ctr{{\hskip 6pt\circle\char'010}} -\def\cbl{{\circle\char'012\hskip -6pt}} -\def\cbr{{\hskip 6pt\circle\char'011}} -\def\carttop{\hbox to \cartouter{\hskip\lskip - \ctl\leaders\hrule height\circthick\hfil\ctr - \hskip\rskip}} -\def\cartbot{\hbox to \cartouter{\hskip\lskip - \cbl\leaders\hrule height\circthick\hfil\cbr - \hskip\rskip}} -% -\newskip\lskip\newskip\rskip - -\long\def\cartouche{% -\begingroup - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt %we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18.4pt % allow for 3pt kerns on either -% side, and for 6pt waste from -% each corner char, and rule thickness - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \hsize=\cartinner - \kern3pt - \begingroup - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip -\def\Ecartouche{% - \endgroup - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup -\endgroup -}} - - -% This macro is called at the beginning of all the @example variants, -% inside a group. -\def\nonfillstart{% - \aboveenvbreak - \inENV % This group ends at the end of the body - \hfuzz = 12pt % Don't be fussy - \sepspaces % Make spaces be word-separators rather than space tokens. - \singlespace - \let\par = \lisppar % don't ignore blank lines - \obeylines % each line of input is a line of output - \parskip = 0pt - \parindent = 0pt - \emergencystretch = 0pt % don't try to avoid overfull boxes - % @cartouche defines \nonarrowing to inhibit narrowing - % at next level down. - \ifx\nonarrowing\relax - \advance \leftskip by \lispnarrowing - \exdentamount=\lispnarrowing - \let\exdent=\nofillexdent - \let\nonarrowing=\relax - \fi -} - -% Define the \E... control sequence only if we are inside the particular -% environment, so the error checking in \end will work. -% -% To end an @example-like environment, we first end the paragraph (via -% \afterenvbreak's vertical glue), and then the group. That way we keep -% the zero \parskip that the environments set -- \parskip glue will be -% inserted at the beginning of the next paragraph in the document, after -% the environment. -% -\def\nonfillfinish{\afterenvbreak\endgroup} - -% @lisp: indented, narrowed, typewriter font. -\def\lisp{\begingroup - \nonfillstart - \let\Elisp = \nonfillfinish - \tt - \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return -} - -% @example: Same as @lisp. -\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp} - -% @small... is usually equivalent to the non-small (@smallbook -% redefines). We must call \example (or whatever) last in the -% definition, since it reads the return following the @example (or -% whatever) command. -% -% This actually allows (for example) @end display inside an -% @smalldisplay. Too bad, but makeinfo will catch the error anyway. -% -\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display} -\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp} -\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format} -\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp} - -% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts. -% Originally contributed by Pavel@xerox. -\def\smalllispx{\begingroup - \def\Esmalllisp{\nonfillfinish\endgroup}% - \def\Esmallexample{\nonfillfinish\endgroup}% - \indexfonts - \lisp -} - -% @display: same as @lisp except keep current font. -% -\def\display{\begingroup - \nonfillstart - \let\Edisplay = \nonfillfinish - \gobble -} - -% @smalldisplay (when @smallbook): @display plus smaller fonts. -% -\def\smalldisplayx{\begingroup - \def\Esmalldisplay{\nonfillfinish\endgroup}% - \indexfonts \rm - \display -} - -% @format: same as @display except don't narrow margins. -% -\def\format{\begingroup - \let\nonarrowing = t - \nonfillstart - \let\Eformat = \nonfillfinish - \gobble -} - -% @smallformat (when @smallbook): @format plus smaller fonts. -% -\def\smallformatx{\begingroup - \def\Esmallformat{\nonfillfinish\endgroup}% - \indexfonts \rm - \format -} - -% @flushleft (same as @format). -% -\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format} - -% @flushright. -% -\def\flushright{\begingroup - \let\nonarrowing = t - \nonfillstart - \let\Eflushright = \nonfillfinish - \advance\leftskip by 0pt plus 1fill - \gobble -} - -% @quotation does normal linebreaking (hence we can't use \nonfillstart) -% and narrows the margins. -% -\def\quotation{% - \begingroup\inENV %This group ends at the end of the @quotation body - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \singlespace - \parindent=0pt - % We have retained a nonzero parskip for the environment, since we're - % doing normal filling. So to avoid extra space below the environment... - \def\Equotation{\parskip = 0pt \nonfillfinish}% - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. - \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing - \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \let\nonarrowing = \relax - \fi -} - - -\message{defuns,} -% Define formatter for defuns -% First, allow user to change definition object font (\df) internally -\def\setdeffont #1 {\csname DEF#1\endcsname} - -\newskip\defbodyindent \defbodyindent=.4in -\newskip\defargsindent \defargsindent=50pt -\newskip\deftypemargin \deftypemargin=12pt -\newskip\deflastargmargin \deflastargmargin=18pt - -\newcount\parencount -% define \functionparens, which makes ( and ) and & do special things. -% \functionparens affects the group it is contained in. -\def\activeparens{% -\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active -\catcode`\[=\active \catcode`\]=\active} - -% Make control sequences which act like normal parenthesis chars. -\let\lparen = ( \let\rparen = ) - -{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) - -% Be sure that we always have a definition for `(', etc. For example, -% if the fn name has parens in it, \boldbrax will not be in effect yet, -% so TeX would otherwise complain about undefined control sequence. -\global\let(=\lparen \global\let)=\rparen -\global\let[=\lbrack \global\let]=\rbrack - -\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } -\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} -% This is used to turn on special parens -% but make & act ordinary (given that it's active). -\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr} - -% Definitions of (, ) and & used in args for functions. -% This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested - \global\advance\parencount by 1 -} -% -% This is the definition of ( when already inside a level of parens. -\gdef\opnested{\char`\(\global\advance\parencount by 1 } -% -\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. - % also in that case restore the outer-level definition of (. - \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi - \global\advance \parencount by -1 } -% If we encounter &foo, then turn on ()-hacking afterwards -\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } -% -\gdef\normalparens{\boldbrax\let&=\ampnr} -} % End of definition inside \activeparens -%% These parens (in \boldbrax) actually are a little bolder than the -%% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 } -\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 } -\def\ampnr{\&} -\def\lbrb{{\bf\char`\[}} -\def\rbrb{{\bf\char`\]}} - -% First, defname, which formats the header line itself. -% #1 should be the function name. -% #2 should be the type of definition, such as "Function". - -\def\defname #1#2{% -% Get the values of \leftskip and \rightskip as they were -% outside the @def... -\dimen2=\leftskip -\advance\dimen2 by -\defbodyindent -\noindent -\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% -\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line -\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 -% Now output arg 2 ("Function" or some such) -% ending at \deftypemargin from the right margin, -% but stuck inside a box of width 0 so it does not interfere with linebreaking -{% Adjust \hsize to exclude the ambient margins, -% so that \rightline will obey them. -\advance \hsize by -\dimen2 -\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% -% Make all lines underfull and no complaints: -\tolerance=10000 \hbadness=10000 -\advance\leftskip by -\defbodyindent -\exdentamount=\defbodyindent -{\df #1}\enskip % Generate function name -} - -% Actually process the body of a definition -% #1 should be the terminating control sequence, such as \Edefun. -% #2 should be the "another name" control sequence, such as \defunx. -% #3 should be the control sequence that actually processes the header, -% such as \defunheader. - -\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % 61 is `=' -\obeylines\activeparens\spacesplit#3} - -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. -% #4, delimited by the space, is the class name. -% -\def\defmethparsebody#1#2#3#4 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} - -% @deftypemethod has an extra argument that nothing else does. Sigh. -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. -% #4, delimited by the space, is the class name. -% #5 is the method's return type. -% -\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} - -\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} - -% These parsing functions are similar to the preceding ones -% except that they do not make parens into active characters. -% These are used for "variables" since they have no arguments. - -\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % -\obeylines\spacesplit#3} - -% This is used for \def{tp,vr}parsebody. It could probably be used for -% some of the others, too, with some judicious conditionals. -% -\def\parsebodycommon#1#2#3{% - \begingroup\inENV % - \medbreak % - % Define the end token that this defining construct specifies - % so that it will exit this group. - \def#1{\endgraf\endgroup\medbreak}% - \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines -} - -\def\defvrparsebody#1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \spacesplit{#3{#4}}% -} - -% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the -% type is just `struct', because we lose the braces in `{struct -% termios}' when \spacesplit reads its undelimited argument. Sigh. -% \let\deftpparsebody=\defvrparsebody -% -% So, to get around this, we put \empty in with the type name. That -% way, TeX won't find exactly `{...}' as an undelimited argument, and -% won't strip off the braces. -% -\def\deftpparsebody #1#2#3#4 {% - \parsebodycommon{#1}{#2}{#3}% - \spacesplit{\parsetpheaderline{#3{#4}}}\empty -} - -% Fine, but then we have to eventually remove the \empty *and* the -% braces (if any). That's what this does. -% -\def\removeemptybraces\empty#1\relax{#1} - -% After \spacesplit has done its work, this is called -- #1 is the final -% thing to call, #2 the type name (which starts with \empty), and #3 -% (which might be empty) the arguments. -% -\def\parsetpheaderline#1#2#3{% - #1{\removeemptybraces#2\relax}{#3}% -}% - -\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\spacesplit{#3{#5}}} - -% Split up #2 at the first space token. -% call #1 with two arguments: -% the first is all of #2 before the space token, -% the second is all of #2 after that space token. -% If #2 contains no space token, all of it is passed as the first arg -% and the second is passed as empty. - -{\obeylines -\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% -\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% -\ifx\relax #3% -#1{#2}{}\else #1{#2}{#3#4}\fi}} - -% So much for the things common to all kinds of definitions. - -% Define @defun. - -% First, define the processing that is wanted for arguments of \defun -% Use this to expand the args and terminate the paragraph they make up - -\def\defunargs #1{\functionparens \sl -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -\hyphenchar\tensl=0 -#1% -\hyphenchar\tensl=45 -\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi% -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\nobreak\vskip -\parskip\nobreak -} - -\def\deftypefunargs #1{% -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -% Use \boldbraxnoamp, not \functionparens, so that & is not special. -\boldbraxnoamp -\tclose{#1}% avoid \code because of side effects on active chars -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\nobreak\vskip -\parskip\nobreak -} - -% Do complete processing of one @defun or @defunx line already parsed. - -% @deffn Command forward-char nchars - -\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} - -\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% -\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defun == @deffn Function - -\def\defun{\defparsebody\Edefun\defunx\defunheader} - -\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Function}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @deftypefun int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} - -% #1 is the data type. #2 is the name and args. -\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} -% #1 is the data type, #2 the name, #3 the args. -\def\deftypefunheaderx #1#2 #3\relax{% -\doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}% -\deftypefunargs {#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} - -% \defheaderxcond#1\relax$$$ -% puts #1 in @code, followed by a space, but does nothing if #1 is null. -\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi} - -% #1 is the classification. #2 is the data type. #3 is the name and args. -\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} -% #1 is the classification, #2 the data type, #3 the name, #4 the args. -\def\deftypefnheaderx #1#2#3 #4\relax{% -\doind {fn}{\code{#3}}% Make entry in function index -\begingroup -\normalparens % notably, turn off `&' magic, which prevents -% at least some C++ text from working -\defname {\defheaderxcond#2\relax$$$#3}{#1}% -\deftypefunargs {#4}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defmac == @deffn Macro - -\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} - -\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Macro}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defspec == @deffn Special Form - -\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} - -\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Special Form}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% This definition is run if you use @defunx -% anywhere other than immediately after a @defun or @defunx. - -\def\deffnx #1 {\errmessage{@deffnx in invalid context}} -\def\defunx #1 {\errmessage{@defunx in invalid context}} -\def\defmacx #1 {\errmessage{@defmacx in invalid context}} -\def\defspecx #1 {\errmessage{@defspecx in invalid context}} -\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}} -\def\deftypefunx #1 {\errmessage{@deftypefunx in invalid context}} - -% @defmethod, and so on - -% @defop CATEGORY CLASS OPERATION ARG... - -\def\defop #1 {\def\defoptype{#1}% -\defopparsebody\Edefop\defopx\defopheader\defoptype} - -\def\defopheader #1#2#3{% -\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index -\begingroup\defname {#2}{\defoptype{} on #1}% -\defunargs {#3}\endgroup % -} - -% @deftypemethod CLASS RETURN-TYPE METHOD ARG... -% -\def\deftypemethod{% - \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader} -% -% #1 is the class name, #2 the data type, #3 the method name, #4 the args. -\def\deftypemethodheader#1#2#3#4{% - \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}% - \deftypefunargs{#4}% - \endgroup -} - -% @defmethod == @defop Method -% -\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} -% -% #1 is the class name, #2 the method name, #3 the args. -\def\defmethodheader#1#2#3{% - \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index - \begingroup - \defname{#2}{\putwordMethodon\ \code{#1}}% - \defunargs{#3}% - \endgroup -} - -% @defcv {Class Option} foo-class foo-flag - -\def\defcv #1 {\def\defcvtype{#1}% -\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype} - -\def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype{} of #1}% -\defvarargs {#3}\endgroup % -} - -% @defivar == @defcv {Instance Variable} - -\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader} - -\def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{Instance Variable of #1}% -\defvarargs {#3}\endgroup % -} - -% These definitions are run if you use @defmethodx, etc., -% anywhere other than immediately after a @defmethod, etc. - -\def\defopx #1 {\errmessage{@defopx in invalid context}} -\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} -\def\defcvx #1 {\errmessage{@defcvx in invalid context}} -\def\defivarx #1 {\errmessage{@defivarx in invalid context}} - -% Now @defvar - -% First, define the processing that is wanted for arguments of @defvar. -% This is actually simple: just print them in roman. -% This must expand the args and terminate the paragraph they make up -\def\defvarargs #1{\normalparens #1% -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak} - -% @defvr Counter foo-count - -\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader} - -\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% -\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} - -% @defvar == @defvr Variable - -\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader} - -\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{Variable}% -\defvarargs {#2}\endgroup % -} - -% @defopt == @defvr {User Option} - -\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader} - -\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{User Option}% -\defvarargs {#2}\endgroup % -} - -% @deftypevar int foobar - -\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader} - -% #1 is the data type. #2 is the name, perhaps followed by text that -% is actually part of the data type, which should not be put into the index. -\def\deftypevarheader #1#2{% -\dovarind#2 \relax% Make entry in variables index -\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}% -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak -\endgroup} -\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}} - -% @deftypevr {Global Flag} int enable - -\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader} - -\def\deftypevrheader #1#2#3{\dovarind#3 \relax% -\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1} -\interlinepenalty=10000 -\endgraf\nobreak\vskip -\parskip\nobreak -\endgroup} - -% This definition is run if you use @defvarx -% anywhere other than immediately after a @defvar or @defvarx. - -\def\defvrx #1 {\errmessage{@defvrx in invalid context}} -\def\defvarx #1 {\errmessage{@defvarx in invalid context}} -\def\defoptx #1 {\errmessage{@defoptx in invalid context}} -\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}} -\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}} - -% Now define @deftp -% Args are printed in bold, a slight difference from @defvar. - -\def\deftpargs #1{\bf \defvarargs{#1}} - -% @deftp Class window height width ... - -\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader} - -\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% -\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} - -% This definition is run if you use @deftpx, etc -% anywhere other than immediately after a @deftp, etc. - -\def\deftpx #1 {\errmessage{@deftpx in invalid context}} - - -\message{macros,} -% @macro. - -% To do this right we need a feature of e-TeX, \scantokens, -% which we arrange to emulate with a temporary file in ordinary TeX. -\ifx\eTeXversion\undefined - \newwrite\macscribble - \def\scanmacro#1{% - \begingroup \newlinechar`\^^M - \immediate\openout\macscribble=\jobname.tmp - \immediate\write\macscribble{#1}% - \immediate\closeout\macscribble - \let\xeatspaces\eatspaces - \input \jobname.tmp - \endgroup -} -\else -\def\scanmacro#1{% -\begingroup \newlinechar`\^^M -\let\xeatspaces\eatspaces\scantokens{#1}\endgroup} -\fi - -\newcount\paramno % Count of parameters -\newtoks\macname % Macro name -\newif\ifrecursive % Is it recursive? - -% Utility routines. -% Thisdoes \let #1 = #2, except with \csnames. -\def\cslet#1#2{% -\expandafter\expandafter -\expandafter\let -\expandafter\expandafter -\csname#1\endcsname -\csname#2\endcsname} - -% Trim leading and trailing spaces off a string. -% Concepts from aro-bend problem 15 (see CTAN). -{\catcode`\@=11 -\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} -\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} -\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} -\def\unbrace#1{#1} -\unbrace{\gdef\trim@@@ #1 } #2@{#1} -} - -% Trim a single trailing ^^M off a string. -{\catcode`\^^M=12\catcode`\Q=3% -\gdef\eatcr #1{\eatcra #1Q^^MQ}% -\gdef\eatcra#1^^MQ{\eatcrb#1Q}% -\gdef\eatcrb#1Q#2Q{#1}% -} - -% Macro bodies are absorbed as an argument in a context where -% all characters are catcode 10, 11 or 12, except \ which is active -% (as in normal texinfo). It is necessary to change the definition of \. - -% It's necessary to have hard CRs when the macro is executed. This is -% done by making ^^M (\endlinechar) catcode 12 when reading the macro -% body, and then making it the \newlinechar in \scanmacro. - -\def\macrobodyctxt{% - \catcode`\~=12 - \catcode`\^=12 - \catcode`\_=12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 - \catcode`\+=12 - \catcode`\{=12 - \catcode`\}=12 - \catcode`\@=12 - \catcode`\^^M=12 - \usembodybackslash} - -\def\macroargctxt{% - \catcode`\~=12 - \catcode`\^=12 - \catcode`\_=12 - \catcode`\|=12 - \catcode`\<=12 - \catcode`\>=12 - \catcode`\+=12 - \catcode`\@=12 - \catcode`\\=12} - -% \mbodybackslash is the definition of \ in @macro bodies. -% It maps \foo\ => \csname macarg.foo\endcsname => #N -% where N is the macro parameter number. -% We define \csname macarg.\endcsname to be \realbackslash, so -% \\ in macro replacement text gets you a backslash. - -{\catcode`@=0 @catcode`@\=@active - @gdef@usembodybackslash{@let\=@mbodybackslash} - @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} -} -\expandafter\def\csname macarg.\endcsname{\realbackslash} - -\def\macro{\recursivefalse\parsearg\macroxxx} -\def\rmacro{\recursivetrue\parsearg\macroxxx} - -\def\macroxxx#1{% - \getargs{#1}% now \macname is the macname and \argl the arglist - \ifx\argl\empty % no arguments - \paramno=0% - \else - \expandafter\parsemargdef \argl;% - \fi - \expandafter\ifx \csname macsave.\the\macname\endcsname \relax - \cslet{macsave.\the\macname}{\the\macname}% - \else - \message{Warning: redefining \the\macname}% - \fi - \begingroup \macrobodyctxt - \ifrecursive \expandafter\parsermacbody - \else \expandafter\parsemacbody - \fi} - -\def\unmacro{\parsearg\unmacroxxx} -\def\unmacroxxx#1{% - \expandafter\ifx \csname macsave.\the\macname\endcsname \relax - \errmessage{Macro \the\macname\ not defined.}% - \else - \cslet{#1}{macsave.#1}% - \expandafter\let \csname macsave.\the\macname\endcsname \undefined - \fi -} - -% This makes use of the obscure feature that if the last token of a -% is #, then the preceding argument is delimited by -% an opening brace, and that opening brace is not consumed. -\def\getargs#1{\getargsxxx#1{}} -\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} -\def\getmacname #1 #2\relax{\macname={#1}} -\def\getmacargs#1{\def\argl{#1}} - -% Parse the optional {params} list. Set up \paramno and \paramlist -% so \defmacro knows what to do. Define \macarg.blah for each blah -% in the params list, to be ##N where N is the position in that list. -% That gets used by \mbodybackslash (above). - -% We need to get `macro parameter char #' into several definitions. -% The technique used is stolen from LaTeX: let \hash be something -% unexpandable, insert that wherever you need a #, and then redefine -% it to # just before using the token list produced. -% -% The same technique is used to protect \eatspaces till just before -% the macro is used. - -\def\parsemargdef#1;{\paramno=0\def\paramlist{}% - \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} -\def\parsemargdefxxx#1,{% - \if#1;\let\next=\relax - \else \let\next=\parsemargdefxxx - \advance\paramno by 1% - \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname - {\xeatspaces{\hash\the\paramno}}% - \edef\paramlist{\paramlist\hash\the\paramno,}% - \fi\next} - -% These two commands read recursive and nonrecursive macro bodies. -% (They're different since rec and nonrec macros end differently.) - -\long\def\parsemacbody#1@end macro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% -\long\def\parsermacbody#1@end rmacro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% - -% This defines the macro itself. There are six cases: recursive and -% nonrecursive macros of zero, one, and many arguments. -% Much magic with \expandafter here. -% \xdef is used so that macro definitions will survive the file -% they're defined in; @include reads the file inside a group. -\def\defmacro{% - \let\hash=##% convert placeholders to macro parameter chars - \ifrecursive - \ifcase\paramno - % 0 - \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\scanmacro{\temp}}% - \or % 1 - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\braceorline\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \egroup\noexpand\scanmacro{\temp}}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname} - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{\egroup\noexpand\scanmacro{\temp}}% - \fi - \else - \ifcase\paramno - % 0 - \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \or % 1 - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\braceorline\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname} - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \fi - \fi} - -\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} - -% \braceorline decides whether the next nonwhitespace character is a -% {. If so it reads up to the closing }, if not, it reads the whole -% line. Whatever was read is then fed to the next control sequence -% as an argument (by \parsebrace or \parsearg) -\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} -\def\braceorlinexxx{% - \ifx\nchar\bgroup\else - \expandafter\parsearg - \fi \next} - - -\message{cross references,} -\newwrite\auxfile - -\newif\ifhavexrefs % True if xref values are known. -\newif\ifwarnedxrefs % True if we warned once that they aren't known. - -% @inforef is relatively simple. -\def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, - node \samp{\ignorespaces#1{}}} - -% @node's job is to define \lastnode. -\def\node{\ENVcheck\parsearg\nodezzz} -\def\nodezzz#1{\nodexxx [#1,]} -\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} -\let\nwnode=\node -\let\lastnode=\relax - -% The sectioning commands (@chapter, etc.) call these. -\def\donoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Ysectionnumberandtype}% - \global\let\lastnode=\relax - \fi -} -\def\unnumbnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}% - \global\let\lastnode=\relax - \fi -} -\def\appendixnoderef{% - \ifx\lastnode\relax\else - \expandafter\expandafter\expandafter\setref{\lastnode}% - {Yappendixletterandtype}% - \global\let\lastnode=\relax - \fi -} - - -% @anchor{NAME} -- define xref target at arbitrary point. -% -\def\anchor#1{\setref{#1}{Ynothing}} - - -% \setref{NAME}{SNT} defines a cross-reference point NAME, namely -% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have -% to set \indexdummies so commands such as @code in a section title -% aren't expanded. It would be nicer not to expand the titles in the -% first place, but there's so many layers that that is hard to do. -% -\def\setref#1#2{{% - \indexdummies - \dosetq{#1-title}{Ytitle}% - \dosetq{#1-pg}{Ypagenumber}% - \dosetq{#1-snt}{#2} -}} - -% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is -% the node name, #2 the name of the Info cross-reference, #3 the printed -% node name, #4 the name of the Info file, #5 the name of the printed -% manual. All but the node name can be omitted. -% -\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} -\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} -\def\ref#1{\xrefX[#1,,,,,,,]} -\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup - \def\printedmanual{\ignorespaces #5}% - \def\printednodename{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual}% - \setbox0=\hbox{\printednodename}% - \ifdim \wd0 = 0pt - % No printed node name was explicitly given. - \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax - % Use the node name inside the square brackets. - \def\printednodename{\ignorespaces #1}% - \else - % Use the actual chapter/section title appear inside - % the square brackets. Use the real section title if we have it. - \ifdim \wd1 > 0pt - % It is in another manual, so we don't have it. - \def\printednodename{\ignorespaces #1}% - \else - \ifhavexrefs - % We know the real title if we have the xref values. - \def\printednodename{\refx{#1-title}{}}% - \else - % Otherwise just copy the Info node name. - \def\printednodename{\ignorespaces #1}% - \fi% - \fi - \fi - \fi - % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordsection{} ``\printednodename'' in \cite{\printedmanual}% - \else - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\normalturnoffactive - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% - % [mynode], - [\printednodename],\space - % page 3 - \turnoffactive \putwordpage\tie\refx{#1-pg}{}% - \fi -\endgroup} - -% \dosetq is the interface for calls from other macros - -% Use \normalturnoffactive so that punctuation chars such as underscore -% and backslash work in node names. (\turnoffactive doesn't do \.) -\def\dosetq#1#2{% - {\let\folio=0 - \normalturnoffactive - \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}% - \iflinks - \next - \fi - }% -} - -% \internalsetq {foo}{page} expands into -% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} -% When the aux file is read, ' is the escape character - -\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} - -% Things to be expanded by \internalsetq - -\def\Ypagenumber{\folio} - -\def\Ytitle{\thissection} - -\def\Ynothing{} - -\def\Ysectionnumberandtype{% -\ifnum\secno=0 \putwordChapter\xreftie\the\chapno % -\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\def\Yappendixletterandtype{% -\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}% -\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno % -\else \ifnum \subsubsecno=0 % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno % -\else % -\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\gdef\xreftie{'tie} - -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. -% -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Non-3.0. -\else - \def\linenumber{\the\inputlineno:\space} -\fi - -% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. -% If its value is nonempty, SUFFIX is output afterward. - -\def\refx#1#2{% - \expandafter\ifx\csname X#1\endcsname\relax - % If not defined, say something at least. - \angleleft un\-de\-fined\angleright - \iflinks - \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% - \else - \ifwarnedxrefs\else - \global\warnedxrefstrue - \message{Cross reference values unknown; you must run TeX again.}% - \fi - \fi - \fi - \else - % It's defined, so just use it. - \csname X#1\endcsname - \fi - #2% Output the suffix in any case. -} - -% This is the macro invoked by entries in the aux file. -% -\def\xrdef#1{\begingroup - % Reenable \ as an escape while reading the second argument. - \catcode`\\ = 0 - \afterassignment\endgroup - \expandafter\gdef\csname X#1\endcsname -} - -% Read the last existing aux file, if any. No error if none exists. -\def\readauxfile{\begingroup - \catcode`\^^@=\other - \catcode`\^^A=\other - \catcode`\^^B=\other - \catcode`\^^C=\other - \catcode`\^^D=\other - \catcode`\^^E=\other - \catcode`\^^F=\other - \catcode`\^^G=\other - \catcode`\^^H=\other - \catcode`\^^K=\other - \catcode`\^^L=\other - \catcode`\^^N=\other - \catcode`\^^P=\other - \catcode`\^^Q=\other - \catcode`\^^R=\other - \catcode`\^^S=\other - \catcode`\^^T=\other - \catcode`\^^U=\other - \catcode`\^^V=\other - \catcode`\^^W=\other - \catcode`\^^X=\other - \catcode`\^^Z=\other - \catcode`\^^[=\other - \catcode`\^^\=\other - \catcode`\^^]=\other - \catcode`\^^^=\other - \catcode`\^^_=\other - \catcode`\@=\other - \catcode`\^=\other - % It was suggested to define this as 7, which would allow ^^e4 etc. - % in xref tags, i.e., node names. But since ^^e4 notation isn't - % supported in the main text, it doesn't seem desirable. Furthermore, - % that is not enough: for node names that actually contain a ^ - % character, we would end up writing a line like this: 'xrdef {'hat - % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first - % argument, and \hat is not an expandable control sequence. It could - % all be worked out, but why? Either we support ^^ or we don't. - % - % The other change necessary for this was to define \auxhat: - % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter - % and then to call \auxhat in \setq. - % - \catcode`\~=\other - \catcode`\[=\other - \catcode`\]=\other - \catcode`\"=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\$=\other - \catcode`\#=\other - \catcode`\&=\other - \catcode`+=\other % avoid \+ for paranoia even though we've turned it off - % Make the characters 128-255 be printing characters - {% - \count 1=128 - \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi - }% - }% - % The aux file uses ' as the escape (for now). - % Turn off \ as an escape so we do not lose on - % entries which were dumped with control sequences in their names. - % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ - % Reference to such entries still does not work the way one would wish, - % but at least they do not bomb out when the aux file is read in. - \catcode`\{=1 - \catcode`\}=2 - \catcode`\%=\other - \catcode`\'=0 - \catcode`\\=\other - % - \openin 1 \jobname.aux - \ifeof 1 \else - \closein 1 - \input \jobname.aux - \global\havexrefstrue - \global\warnedobstrue - \fi - % Open the new aux file. TeX will close it automatically at exit. - \openout\auxfile=\jobname.aux -\endgroup} - - -% Footnotes. - -\newcount \footnoteno - -% The trailing space in the following definition for supereject is -% vital for proper filling; pages come out unaligned when you do a -% pagealignmacro call if that space before the closing brace is -% removed. (Generally, numeric constants should always be followed by a -% space to prevent strange expansion errors.) -\def\supereject{\par\penalty -20000\footnoteno =0 } - -% @footnotestyle is meaningful for info output only. -\let\footnotestyle=\comment - -\let\ptexfootnote=\footnote - -{\catcode `\@=11 -% -% Auto-number footnotes. Otherwise like plain. -\gdef\footnote{% - \global\advance\footnoteno by \@ne - \edef\thisfootno{$^{\the\footnoteno}$}% - % - % In case the footnote comes at the end of a sentence, preserve the - % extra spacing after we do the footnote number. - \let\@sf\empty - \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi - % - % Remove inadvertent blank space before typesetting the footnote number. - \unskip - \thisfootno\@sf - \footnotezzz -}% - -% Don't bother with the trickery in plain.tex to not require the -% footnote text as a parameter. Our footnotes don't need to be so general. -% -% Oh yes, they do; otherwise, @ifset and anything else that uses -% \parseargline fail inside footnotes because the tokens are fixed when -% the footnote is read. --karl, 16nov96. -% -\long\gdef\footnotezzz{\insert\footins\bgroup - % We want to typeset this text as a normal paragraph, even if the - % footnote reference occurs in (for example) a display environment. - % So reset some parameters. - \interlinepenalty\interfootnotelinepenalty - \splittopskip\ht\strutbox % top baseline for broken footnotes - \splitmaxdepth\dp\strutbox - \floatingpenalty\@MM - \leftskip\z@skip - \rightskip\z@skip - \spaceskip\z@skip - \xspaceskip\z@skip - \parindent\defaultparindent - % - % Hang the footnote text off the number. - \hang - \textindent{\thisfootno}% - % - % Don't crash into the line above the footnote text. Since this - % expands into a box, it must come within the paragraph, lest it - % provide a place where TeX can split the footnote. - \footstrut - \futurelet\next\fo@t -} -\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t - \else\let\next\f@t\fi \next} -\def\f@@t{\bgroup\aftergroup\@foot\let\next} -\def\f@t#1{#1\@foot} -\def\@foot{\strut\egroup} - -}%end \catcode `\@=11 - -% Set the baselineskip to #1, and the lineskip and strut size -% correspondingly. There is no deep meaning behind these magic numbers -% used as factors; they just match (closely enough) what Knuth defined. -% -\def\lineskipfactor{.08333} -\def\strutheightpercent{.70833} -\def\strutdepthpercent {.29167} -% -\def\setleading#1{% - \normalbaselineskip = #1\relax - \normallineskip = \lineskipfactor\normalbaselineskip - \normalbaselines - \setbox\strutbox =\hbox{% - \vrule width0pt height\strutheightpercent\baselineskip - depth \strutdepthpercent \baselineskip - }% -} - -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} - -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). -% -\def\finalout{\overfullrule=0pt} - -% @image. We use the macros from epsf.tex to support this. -% If epsf.tex is not installed and @image is used, we complain. -% -% Check for and read epsf.tex up front. If we read it only at @image -% time, we might be inside a group, and then its definitions would get -% undone and the next image would fail. -\openin 1 = epsf.tex -\ifeof 1 \else - \closein 1 - % Do not bother showing banner with post-v2.7 epsf.tex (available in - % doc/epsf.tex until it shows up on ctan). - \def\epsfannounce{\toks0 = }% - \input epsf.tex -\fi -% -\newif\ifwarnednoepsf -\newhelp\noepsfhelp{epsf.tex must be installed for images to - work. It is also included in the Texinfo distribution, or you can get - it from ftp://ftp.tug.org/tex/epsf.tex.} -% -% Only complain once about lack of epsf.tex. -\def\image#1{% - \ifx\epsfbox\undefined - \ifwarnednoepsf \else - \errhelp = \noepsfhelp - \errmessage{epsf.tex not found, images will be ignored}% - \global\warnednoepsftrue - \fi - \else - \imagexxx #1,,,\finish - \fi -} -% -% Arguments to @image: -% #1 is (mandatory) image filename; we tack on .eps extension. -% #2 is (optional) width, #3 is (optional) height. -% #4 is just the usual extra ignored arg for parsing this stuff. -\def\imagexxx#1,#2,#3,#4\finish{% - % \epsfbox itself resets \epsf?size at each figure. - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi - \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi - % If the image is by itself, center it. - \ifvmode - \nobreak\medskip - \nobreak - \centerline{\epsfbox{#1.eps}}% - \bigbreak - \else - \epsfbox{#1.eps}% - \fi -} - - -\message{paper sizes,} -% And other related parameters. - -\newdimen\defaultparindent \defaultparindent = 15pt - -\chapheadingskip = 15pt plus 4pt minus 2pt -\secheadingskip = 12pt plus 3pt minus 2pt -\subsecheadingskip = 9pt plus 2pt minus 2pt - -% Prevent underfull vbox error messages. -\vbadness = 10000 - -% Don't be so finicky about underfull hboxes, either. -\hbadness = 2000 - -% Following George Bush, just get rid of widows and orphans. -\widowpenalty=10000 -\clubpenalty=10000 - -% Use TeX 3.0's \emergencystretch to help line breaking, but if we're -% using an old version of TeX, don't do anything. We want the amount of -% stretch added to depend on the line length, hence the dependence on -% \hsize. This makes it come to about 9pt for the 8.5x11 format. We -% call this whenever the paper size is set. -% -\def\setemergencystretch{% - \ifx\emergencystretch\thisisundefined - % Allow us to assign to \emergencystretch anyway. - \def\emergencystretch{\dimen0}% - \else - \emergencystretch = \hsize - \divide\emergencystretch by 45 - \fi -} - -% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can -% set \parskip and call \setleading for \baselineskip. -% -\def\internalpagesizes#1#2#3#4#5#6{% - \voffset = #3\relax - \topskip = #6\relax - \splittopskip = \topskip - % - \vsize = #1\relax - \advance\vsize by \topskip - \outervsize = \vsize - \advance\outervsize by 2\topandbottommargin - \pageheight = \vsize - % - \hsize = #2\relax - \outerhsize = \hsize - \advance\outerhsize by 0.5in - \pagewidth = \hsize - % - \normaloffset = #4\relax - \bindingoffset = #5\relax - % - \parindent = \defaultparindent - \setemergencystretch -} - -% @letterpaper (the default). -\def\letterpaper{{\globaldefs = 1 - \parskip = 3pt plus 2pt minus 1pt - \setleading{13.2pt}% - % - % If page is nothing but text, make it come out even. - \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}% -}} - -% Use @smallbook to reset parameters for 7x9.5 (or so) format. -\def\smallbook{{\globaldefs = 1 - \parskip = 2pt plus 1pt - \setleading{12pt}% - % - \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}% - % - \lispnarrowing = 0.3in - \tolerance = 700 - \hfuzz = 1pt - \contentsrightmargin = 0pt - \deftypemargin = 0pt - \defbodyindent = .5cm - % - \let\smalldisplay = \smalldisplayx - \let\smallexample = \smalllispx - \let\smallformat = \smallformatx - \let\smalllisp = \smalllispx -}} - -% Use @afourpaper to print on European A4 paper. -\def\afourpaper{{\globaldefs = 1 - \setleading{12pt}% - \parskip = 3pt plus 2pt minus 1pt - % - \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}% - % - \tolerance = 700 - \hfuzz = 1pt -}} - -% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin -% 29mm, hence bottom margin 28mm, nominal side margin 3cm. -\def\afourlatex{{\globaldefs = 1 - \setleading{13.6pt}% - % - \afourpaper - \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}% - % - \globaldefs = 0 -}} - -% Use @afourwide to print on European A4 paper in wide format. -\def\afourwide{% - \afourpaper - \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}% - % - \globaldefs = 0 -} - -% @pagesizes TEXTHEIGHT[,TEXTWIDTH] -% Perhaps we should allow setting the margins, \topskip, \parskip, -% and/or leading, also. Or perhaps we should compute them somehow. -% -\def\pagesizes{\parsearg\pagesizesxxx} -\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish} -\def\pagesizesyyy#1,#2,#3\finish{{% - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi - \globaldefs = 1 - % - \parskip = 3pt plus 2pt minus 1pt - \setleading{13.2pt}% - % - \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}% -}} - -% Set default to letter. -% -\letterpaper - -\message{and turning on texinfo input format.} - -% Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} - -% This macro is used to make a character print one way in ttfont -% where it can probably just be output, and another way in other fonts, -% where something hairier probably needs to be done. -% -% #1 is what to print if we are indeed using \tt; #2 is what to print -% otherwise. Since all the Computer Modern typewriter fonts have zero -% interword stretch (and shrink), and it is reasonable to expect all -% typewriter fonts to have this, we can check that font parameter. -% -\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi} - -% Turn off all special characters except @ -% (and those which the user can use as if they were ordinary). -% Most of these we simply print from the \tt font, but for some, we can -% use math or other variants that look better in normal text. - -\catcode`\"=\active -\def\activedoublequote{{\tt\char34}} -\let"=\activedoublequote -\catcode`\~=\active -\def~{{\tt\char126}} -\chardef\hat=`\^ -\catcode`\^=\active -\def^{{\tt \hat}} - -\catcode`\_=\active -\def_{\ifusingtt\normalunderscore\_} -% Subroutine for the previous macro. -\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}} - -\catcode`\|=\active -\def|{{\tt\char124}} -\chardef \less=`\< -\catcode`\<=\active -\def<{{\tt \less}} -\chardef \gtr=`\> -\catcode`\>=\active -\def>{{\tt \gtr}} -\catcode`\+=\active -\def+{{\tt \char 43}} -%\catcode 27=\active -%\def^^[{$\diamondsuit$} - -% Set up an active definition for =, but don't enable it most of the time. -{\catcode`\==\active -\global\def={{\tt \char 61}}} - -\catcode`+=\active -\catcode`\_=\active - -% If a .fmt file is being used, characters that might appear in a file -% name cannot be active until we have parsed the command line. -% So turn them off again, and have \everyjob (or @setfilename) turn them on. -% \otherifyactive is called near the end of this file. -\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} - -\catcode`\@=0 - -% \rawbackslashxx output one backslash character in current font -\global\chardef\rawbackslashxx=`\\ -%{\catcode`\\=\other -%@gdef@rawbackslashxx{\}} - -% \rawbackslash redefines \ as input to do \rawbackslashxx. -{\catcode`\\=\active -@gdef@rawbackslash{@let\=@rawbackslashxx }} - -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\rawbackslashxx}} - -% Say @foo, not \foo, in error messages. -\escapechar=`\@ - -% \catcode 17=0 % Define control-q -\catcode`\\=\active - -% Used sometimes to turn off (effectively) the active characters -% even after parsing them. -@def@turnoffactive{@let"=@normaldoublequote -@let\=@realbackslash -@let~=@normaltilde -@let^=@normalcaret -@let_=@normalunderscore -@let|=@normalverticalbar -@let<=@normalless -@let>=@normalgreater -@let+=@normalplus} - -@def@normalturnoffactive{@let"=@normaldoublequote -@let\=@normalbackslash -@let~=@normaltilde -@let^=@normalcaret -@let_=@normalunderscore -@let|=@normalverticalbar -@let<=@normalless -@let>=@normalgreater -@let+=@normalplus} - -% Make _ and + \other characters, temporarily. -% This is canceled by @fixbackslash. -@otherifyactive - -% If a .fmt file is being used, we don't want the `\input texinfo' to show up. -% That is what \eatinput is for; after that, the `\' should revert to printing -% a backslash. -% -@gdef@eatinput input texinfo{@fixbackslash} -@global@let\ = @eatinput - -% On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\{ in the file would cause an error. This macro tries to fix -% that, assuming it is called before the first `\' could plausibly occur. -% Also back turn on active characters that might appear in the input -% file name, in case not using a pre-dumped format. -% -@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi - @catcode`+=@active @catcode`@_=@active} - -% These look ok in all fonts, so just make them not special. The @rm below -% makes sure that the current font starts out as the newly loaded cmr10 -@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other - -@textfonts -@rm - -@c Local variables: -@c eval: (add-hook 'write-file-hooks 'time-stamp) -@c page-delimiter: "^\\\\message" -@c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d" -@c time-stamp-end: "}" -@c End: diff --git a/doc/tinc.conf.5 b/doc/tinc.conf.5.in similarity index 95% rename from doc/tinc.conf.5 rename to doc/tinc.conf.5.in index 40b688a..0e323b2 100644 --- a/doc/tinc.conf.5 +++ b/doc/tinc.conf.5.in @@ -8,7 +8,7 @@ .Nd tinc daemon configuration .Sh DESCRIPTION The files in the -.Pa /etc/tinc/ +.Pa @sysconfdir@/tinc/ directory contain runtime and security information for the tinc daemon. .Sh NETWORKS It is perfectly ok for you to run more than one tinc daemon. @@ -25,7 +25,7 @@ with the option, which will assign a name to this daemon. .Pp The effect of this is that the daemon will set its configuration root to -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa / , +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa / , where .Ar NETNAME is your argument to the @@ -41,13 +41,13 @@ In this case, the network name would just be empty, and it will be used as such. .Nm tinc now looks for files in -.Pa /etc/tinc/ , +.Pa @sysconfdir@/tinc/ , instead of -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa / ; +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa / ; the configuration file should be -.Pa /etc/tinc/tinc.conf , +.Pa @sysconfdir@/tinc/tinc.conf , and the host configuration files are now expected to be in -.Pa /etc/tinc/hosts/ . +.Pa @sysconfdir@/tinc/hosts/ . .Pp But it is highly recommended that you use this feature of .Nm tinc , @@ -57,7 +57,7 @@ Hence, we will assume that you use it. Each tinc daemon should have a name that is unique in the network which it will be part of. The name will be used by other tinc daemons for identification. The name has to be declared in the -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf file. .Pp To make things easy, @@ -69,21 +69,21 @@ You should use to generate public/private keypairs. It will generate two keys. The private key should be stored in a separate file -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /rsa_key.priv +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /rsa_key.priv \-\- where .Ar NETNAME stands for the network (see .Sx NETWORKS ) above. The public key should be stored in the host configuration file -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Va NAME +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Va NAME \-\- where .Va NAME stands for the name of the local tinc daemon (see .Sx NAMES ) . .Sh SERVER CONFIGURATION The server configuration of the daemon is done in the file -.Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf . +.Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf . This file consists of comments (lines started with a .Li # ) or assignments in the form of: @@ -306,14 +306,14 @@ Setting this options also implicitly sets IndirectData. .El .Sh FILES .Bl -tag -width indent -.It Pa /etc/tinc/ +.It Pa @sysconfdir@/tinc/ The top directory for configuration files. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf The default name of the server configuration file for net .Ar NETNAME . -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /hosts/ +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Host configuration files are kept in this directory. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc-up +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-up If an executable file with this name exists, it will be executed right after the tinc daemon has connected to the virtual network device. It can be used to set up the corresponding network interface. @@ -328,7 +328,7 @@ or if the virtual network device is a Linux tun/tap device, the environment variable .Ev $INTERFACE will be set to the name of the network interface. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc-down +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-down If an executable file with this name exists, it will be executed right before the tinc daemon is going to close its connection to the virtual network device. diff --git a/doc/tinc.texi b/doc/tinc.texi index 26b8dca..555017a 100644 --- a/doc/tinc.texi +++ b/doc/tinc.texi @@ -1,24 +1,26 @@ \input texinfo @c -*-texinfo-*- -@c $Id: tinc.texi,v 1.8.4.42 2003/08/02 22:01:50 guus Exp $ +@c $Id: tinc.texi,v 1.8.4.43 2003/08/08 14:07:12 guus Exp $ @c %**start of header @setfilename tinc.info @settitle tinc Manual @setchapternewpage odd @c %**end of header +@include tincinclude.texi + @ifinfo @dircategory Networking tools @direntry * tinc: (tinc). The tinc Manual. @end direntry -This is the info manual for tinc, a Virtual Private Network daemon. +This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon. Copyright @copyright{} 1998-2003 Ivo Timmermans , Guus Sliepen and Wessel Dankers . -$Id: tinc.texi,v 1.8.4.42 2003/08/02 22:01:50 guus Exp $ +$Id: tinc.texi,v 1.8.4.43 2003/08/08 14:07:12 guus Exp $ Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -39,11 +41,13 @@ permission notice identical to this one. @page @vskip 0pt plus 1filll @cindex copyright +This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon. + Copyright @copyright{} 1998-2003 Ivo Timmermans , Guus Sliepen and Wessel Dankers . -$Id: tinc.texi,v 1.8.4.42 2003/08/02 22:01:50 guus Exp $ +$Id: tinc.texi,v 1.8.4.43 2003/08/08 14:07:12 guus Exp $ Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -830,14 +834,14 @@ This means that you call tincd with the -n argument, which will assign a netname to this daemon. The effect of this is that the daemon will set its configuration -``root'' to /etc/tinc/netname/, where netname is your argument to the -n -option. You'll notice that it appears in syslog as ``tinc.netname''. +``root'' to @value{sysconfdir}/tinc/@emph{netname}/, where @emph{netname} is your argument to the -n +option. You'll notice that it appears in syslog as ``tinc.@emph{netname}''. However, it is not strictly necessary that you call tinc with the -n option. In this case, the network name would just be empty, and it will -be used as such. tinc now looks for files in /etc/tinc/, instead of -/etc/tinc/netname/; the configuration file should be /etc/tinc/tinc.conf, -and the host configuration files are now expected to be in /etc/tinc/hosts/. +be used as such. tinc now looks for files in @value{sysconfdir}/tinc/, instead of +@value{sysconfdir}/tinc/@emph{netname}/; the configuration file should be @value{sysconfdir}/tinc/tinc.conf, +and the host configuration files are now expected to be in @value{sysconfdir}/tinc/hosts/. But it is highly recommended that you use this feature of tinc, because it will be so much clearer whom your daemon talks to. Hence, we will @@ -874,8 +878,8 @@ It does not matter if two tinc daemons have a `ConnectTo' value pointing to each @section Configuration files The actual configuration of the daemon is done in the file -@file{/etc/tinc/netname/tinc.conf} and at least one other file in the directory -@file{/etc/tinc/netname/hosts/}. +@file{@value{sysconfdir}/tinc/@emph{netname}/tinc.conf} and at least one other file in the directory +@file{@value{sysconfdir}/tinc/@emph{netname}/hosts/}. These file consists of comments (lines started with a #) or assignments in the form of @@ -1144,13 +1148,13 @@ Setting this options also implicitly sets IndirectData. @subsubheading Step 1. Creating the main configuration file -The main configuration file will be called @file{/etc/tinc/netname/tinc.conf}. +The main configuration file will be called @file{@value{sysconfdir}/tinc/@emph{netname}/tinc.conf}. Adapt the following example to create a basic configuration file: @example Name = @emph{yourname} Device = @emph{/dev/tap0} -PrivateKeyFile = /etc/tinc/@emph{netname}/rsa_key.priv +PrivateKeyFile = @value{sysconfdir}/tinc/@emph{netname}/rsa_key.priv @end example Then, if you know to which other tinc daemon(s) yours is going to connect, @@ -1159,7 +1163,7 @@ add `ConnectTo' values. @subsubheading Step 2. Creating your host configuration file If you added a line containing `Name = yourname' in the main configuarion file, -you will need to create a host configuration file @file{/etc/tinc/netname/hosts/yourname}. +you will need to create a host configuration file @file{@value{sysconfdir}/tinc/@emph{netname}/hosts/yourname}. Adapt the following example to create a host configuration file: @example @@ -1205,9 +1209,9 @@ if you are using the Linux tun/tap driver, the network interface will by default @cindex tinc-up You can configure the network interface by putting ordinary ifconfig, route, and other commands -to a script named @file{/etc/tinc/netname/tinc-up}. When tinc starts, this script +to a script named @file{@value{sysconfdir}/tinc/@emph{netname}/tinc-up}. When tinc starts, this script will be executed. When tinc exits, it will execute the script named -@file{/etc/tinc/netname/tinc-down}, but normally you don't need to create that script. +@file{@value{sysconfdir}/tinc/@emph{netname}/tinc-down}, but normally you don't need to create that script. An example @file{tinc-up} script: @@ -1262,7 +1266,7 @@ for this particular VPN. @emph{BranchA} would be configured like this: -In @file{/etc/tinc/company/tinc-up}: +In @file{@value{sysconfdir}/tinc/company/tinc-up}: @example # Real interface of internal network: @@ -1271,15 +1275,15 @@ In @file{/etc/tinc/company/tinc-up}: ifconfig $INTERFACE 10.1.54.1 netmask 255.0.0.0 @end example -and in @file{/etc/tinc/company/tinc.conf}: +and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchA -PrivateKeyFile = /etc/tinc/company/rsa_key.priv +PrivateKeyFile = @value{sysconfdir}/tinc/company/rsa_key.priv Device = /dev/tap0 @end example -On all hosts, /etc/tinc/company/hosts/BranchA contains: +On all hosts, @value{sysconfdir}/tinc/company/hosts/BranchA contains: @example Subnet = 10.1.0.0/16 @@ -1298,7 +1302,7 @@ since that will make things a lot easier to remember and set up. @subsubheading For Branch B -In @file{/etc/tinc/company/tinc-up}: +In @file{@value{sysconfdir}/tinc/company/tinc-up}: @example # Real interface of internal network: @@ -1307,19 +1311,19 @@ In @file{/etc/tinc/company/tinc-up}: ifconfig $INTERFACE 10.2.1.12 netmask 255.0.0.0 @end example -and in @file{/etc/tinc/company/tinc.conf}: +and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchB ConnectTo = BranchA -PrivateKeyFile = /etc/tinc/company/rsa_key.priv +PrivateKeyFile = @value{sysconfdir}/tinc/company/rsa_key.priv @end example Note here that the internal address (on eth0) doesn't have to be the same as on the tap0 device. Also, ConnectTo is given so that no-one can connect to this node. -On all hosts, in @file{/etc/tinc/company/hosts/BranchB}: +On all hosts, in @file{@value{sysconfdir}/tinc/company/hosts/BranchB}: @example Subnet = 10.2.0.0/16 @@ -1333,7 +1337,7 @@ Address = 2.3.4.5 @subsubheading For Branch C -In @file{/etc/tinc/company/tinc-up}: +In @file{@value{sysconfdir}/tinc/company/tinc-up}: @example # Real interface of internal network: @@ -1342,7 +1346,7 @@ In @file{/etc/tinc/company/tinc-up}: ifconfig $INTERFACE 10.3.69.254 netmask 255.0.0.0 @end example -and in @file{/etc/tinc/company/tinc.conf}: +and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchC @@ -1354,7 +1358,7 @@ C already has another daemon that runs on port 655, so they have to reserve another port for tinc. It knows the portnumber it has to listen on from it's own host configuration file. -On all hosts, in @file{/etc/tinc/company/hosts/BranchC}: +On all hosts, in @file{@value{sysconfdir}/tinc/company/hosts/BranchC}: @example Address = 3.4.5.6 @@ -1369,7 +1373,7 @@ Port = 2000 @subsubheading For Branch D -In @file{/etc/tinc/company/tinc-up}: +In @file{@value{sysconfdir}/tinc/company/tinc-up}: @example # Real interface of internal network: @@ -1378,13 +1382,13 @@ In @file{/etc/tinc/company/tinc-up}: ifconfig $INTERFACE 10.4.3.32 netmask 255.0.0.0 @end example -and in @file{/etc/tinc/company/tinc.conf}: +and in @file{@value{sysconfdir}/tinc/company/tinc.conf}: @example Name = BranchD ConnectTo = BranchC Device = /dev/net/tun -PrivateKeyFile = /etc/tinc/company/rsa_key.priv +PrivateKeyFile = @value{sysconfdir}/tinc/company/rsa_key.priv @end example D will be connecting to C, which has a tincd running for this network on @@ -1393,7 +1397,7 @@ Also note that since D uses the tun/tap driver, the network interface will not be called `tun' or `tap0' or something like that, but will have the same name as netname. -On all hosts, in @file{/etc/tinc/company/hosts/BranchD}: +On all hosts, in @file{@value{sysconfdir}/tinc/company/hosts/BranchD}: @example Subnet = 10.4.0.0/16 @@ -1412,8 +1416,8 @@ A, B, C and D all have generated a public/private keypair with the following com tincd -n company -K @end example -The private key is stored in @file{/etc/tinc/company/rsa_key.priv}, -the public key is put into the host configuration file in the @file{/etc/tinc/company/hosts/} directory. +The private key is stored in @file{@value{sysconfdir}/tinc/company/rsa_key.priv}, +the public key is put into the host configuration file in the @file{@value{sysconfdir}/tinc/company/hosts/} directory. During key generation, tinc automatically guesses the right filenames based on the -n option and the Name directive in the @file{tinc.conf} file (if it is available). @@ -1460,7 +1464,7 @@ command line options. @table @samp @item -c, --config=PATH Read configuration options from the directory PATH. The default is -@file{/etc/tinc/netname/}. +@file{@value{sysconfdir}/tinc/@emph{netname}/}. @item -D, --no-detach Don't fork and detach. @@ -1492,10 +1496,10 @@ This will prevent sensitive data like shared private keys to be written to the s @item --logfile[=FILE] Write log entries to a file instead of to the system logging facility. -If FILE is omitted, the default is /var/log/tinc.NETNAME.log. +If FILE is omitted, the default is @value{localstatedir}/log/tinc.NETNAME.log. @item --pidfile=FILE -Write PID to FILE instead of /var/run/tinc.NETNAME.pid. +Write PID to FILE instead of @value{localstatedir}/run/tinc.NETNAME.pid. @item --bypass-security Disables encryption and authentication. diff --git a/doc/tincd.8 b/doc/tincd.8.in similarity index 91% rename from doc/tincd.8 rename to doc/tincd.8.in index b85ffa9..a2957ef 100644 --- a/doc/tincd.8 +++ b/doc/tincd.8.in @@ -72,12 +72,12 @@ Write log entries to a file instead of to the system logging facility. If .Ar FILE is omitted, the default is -.Pa /var/log/tinc. Ns Ar NETNAME Ns Pa .log. +.Pa @localstatedir@/log/tinc. Ns Ar NETNAME Ns Pa .log. .It Fl -pidfile Ns = Ns Ar FILE Write PID to .Ar FILE instead of -.Pa /var/run/tinc. Ns Ar NETNAME Ns Pa .pid. +.Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid. .It Fl -bypass-security Disables encryption and authentication of the meta protocol. Only useful for debugging. @@ -141,29 +141,29 @@ This will log all network traffic over the virtual private network. .El .Sh FILES .Bl -tag -width indent -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf The configuration file for .Nm . -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc-up +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-up Script which is executed as soon as the virtual network device has been allocated. Purpose is to further configure that device. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /tinc-down +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-down Script which is executed when .Nm exits. Purpose is to cleanly shut down the virtual network device before it will be deallocated. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /hosts/* +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/* The directory containing the host configuration files used to authenticate other tinc daemons. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar NAME Ns Pa -up +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar NAME Ns Pa -up Script which is executed as soon as host .Ar NAME becomes reachable. -.It Pa /etc/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar NAME Ns Pa -down +.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar NAME Ns Pa -down Script which is executed as soon as host .Ar NAME becomes unreachable. -.It Pa /var/run/tinc. Ns Ar NETNAME Ns Pa .pid +.It Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid The PID of the currently running .Nm is stored in this file. diff --git a/doc/tincinclude.texi.in b/doc/tincinclude.texi.in new file mode 100644 index 0000000..da4adc5 --- /dev/null +++ b/doc/tincinclude.texi.in @@ -0,0 +1,4 @@ +@set VERSION @VERSION@ +@set PACKAGE @PACKAGE@ +@set sysconfdir @sysconfdir@ +@set localstatedir @localstatedir@ -- 2.25.1