+++ /dev/null
-#!/bin/sh
-#
-# tinc tincd VPN setup script
-#
-# chkconfig: 2345 46 54
-#
-# version: 1.0.8
-# authors: Lubomir Bulej <pallas@kadan.cz>
-# Mads Kiilerich <mads@kiilerich.com>
-#
-# description: This script parses tinc configuration files for networks given \
-# in /etc/tinc/nets.boot and for each of the networks it sets up \
-# the interface and static routes and starts the tinc daemon.
-#
-# processname: tincd
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-#############################################################################
-# configuration & sanity checks
-
-TINCD=/usr/sbin/tincd
-TCONF=/etc/tinc
-TPIDS=/var/run
-#DEBUG=-dddd
-
-NETSFILE=$TCONF/nets.boot
-
-# Check the daemon
-if [ ! -x $TINCD ]; then
- echo "**tinc: $TINCD does not exist or is not executable!" >&2
- exit
-fi
-
-# Check the configuration directory
-if [ ! -d $TCONF ]; then
- echo "**tinc: configuration directory ($TCONF) not found!" >&2
- exit
-fi
-
-# Check nets.boot
-if [ ! -f $NETSFILE ]; then
- echo "**tinc: file with list of VPNs to start ($NETSFILE) not found!" >&2
- exit
-fi
-
-# Load names of networks to be started
-NETS="$(sed -e 's/#.*//; s/[[:space:]]//g; /^$/ d' $NETSFILE)"
-
-
-##############################################################################
-# vpn_start () starts specified VPN
-#
-# $1 ... VPN to start
-
-vpn_start () {
- # start tincd
- $TINCD --net="$1" $DEBUG || \
- { MSG="could not start daemon for network $1"; return 3; }
- return 0
-} # vpn_start
-
-
-##############################################################################
-# vpn_stop () Stops specified VPN
-#
-# $1 ... VPN to stop
-
-vpn_stop () {
- # kill the tincd daemon
- PID="$TPIDS/tinc.$1.pid"
- if [ -f $PID ]; then
- $TINCD --net="$1" --kill &> /dev/null
- RET=$?
-
- if [ $RET -eq 0 ]; then
- dly=0
- while [ $dly -le 5 ]; do
- [ -f $PID ] || break
- sleep 1; dly=$((dly + 1))
- done
- fi
-
- # remove stale PID file
- [ -f $PID ] && rm -f $PID
- fi
- return 0
-} # vpn_stop
-
-
-# Check if there is anything to start
-if [ ! -z "$1" -a "$1" != "status" -a -z "$NETS" ]; then
- echo "**tinc: no networks found in $NETSFILE!" >&2
- exit
-fi
-
-
-# See how we were called.
-case "$1" in
- start)
- for vpn in $NETS; do
- echo -n "Bringing up TINC network $vpn: "
- vpn_start $vpn && \
- success "startup of network $vpn" || \
- failure "startup of network $vpn"
- echo
-
- if [ ! -z "$MSG" ]; then
- [ ! -z "$ERR" ] && echo "$ERR" >&2
- echo "**tinc: $MSG" >&2
- fi
- done
-
- touch /var/lock/subsys/tinc
- ;;
-
- stop)
- for vpn in $NETS; do
- echo -n "Shutting down TINC network $vpn: "
- vpn_stop $vpn && \
- success "shutdown of network $vpn" || \
- failure "shutdown of network $vpn"
- echo
-
- if [ ! -z "$MSG" ]; then
- [ ! -z "$ERR" ] && echo "$ERR" >&2
- echo "**tinc: $MSG" >&2
- fi
- done
-
- rm -f /var/lock/subsys/tinc
- ;;
-
- status)
- echo -n "Configured VPNs: "
- for vpn in $NETS; do
- PID="$TPIDS/tinc.$vpn.pid"
-
- [ -f $PID ] && PID="$(cat $PID)" || PID="-dead-"
- ps ax | grep "^[[:space:]]*$PID" && STS="OK" || STS="DEAD"
- echo -n "$vpn:$STS "
- done
- echo
- ;;
-
- restart)
- $0 stop
- $0 start
- ;;
-
- *)
- echo "Usage: tinc {start|stop|status|restart}"
- exit 1
-esac
-
-exit 0
+++ /dev/null
-Summary: tinc Virtual Private Network daemon
-Name: tinc
-Version: 1.0
-Release: cvs
-Copyright: GPL
-Group: System Environment/Daemons
-URL: http://tinc.nl.linux.org/
-Source0: %{name}-%{version}-%{release}.tar.gz
-Buildroot: /var/tmp/%{name}
-#-%{version}-%{release}
-#Requires: iproute
-# for building the package the following is required:
-# /usr/bin/texi2html /usr/bin/patch
-
-%description
-# taken from doc/tinc.texi
-tinc is a Virtual Private Network (VPN) daemon that uses tunneling and
-encryption to create a secure private network between hosts on the
-Internet.
-
-Because the tunnel appears to the IP level network code as a normal
-network device, there is no need to adapt any existing software.
-
-This tunneling allows VPN sites to share information with each other
-over the Internet without exposing any information to others.
-
-See http://tinc.nl.linux.org/
-
-%prep
-
-%setup -q -n %{name}-%{version}-%{release}
-
-%build
-./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
-make
-/usr/bin/texi2html doc/tinc.texi
-
-%install
-rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=$RPM_BUILD_ROOT
-gzip $RPM_BUILD_ROOT/usr/info/tinc.info
-
-mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d/
-cp redhat/tinc $RPM_BUILD_ROOT/etc/rc.d/init.d/
-
-mkdir -p $RPM_BUILD_ROOT/etc/tinc/
-touch $RPM_BUILD_ROOT/etc/tinc/nets.boot
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%pre
-%post
-
-/sbin/chkconfig --add tinc
-
-grep -q '^tinc[[:space:]]' /etc/services || patch -s /etc/services << END
-*** services.org Tue Apr 18 13:22:22 2000
---- services Tue Apr 18 13:24:19 2000
-***************
-*** 145,148 ****
---- 145,150 ----
- hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
- hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
-+ tinc 655/tcp TINC # tinc vpn
-+ tinc 655/udp TINC # http://tinc.nl.linux.org/
- #
- # UNIX specific services
-END
-
-grep -q '^alias tap0' /etc/conf.modules || cat >> /etc/conf.modules << END
-# tinc uses ethertap/netlink
-alias tap0 ethertap
-alias char-major-36 netlink_dev
-alias char-major-10-200 tun
-END
-/sbin/install-info /usr/info/tinc.info.gz /usr/info/dir
-
-%preun
-/sbin/install-info --delete /usr/info/tinc.info.gz /usr/info/dir
-
-%postun
-
-%files
-%doc AUTHORS ChangeLog NEWS README THANKS *.html
-%config /etc/tinc/
-%attr(0755,root,root) /etc/rc.d/init.d/tinc
-/usr/sbin/tincd
-/usr/man/man5/tinc.conf.5
-/usr/man/man8/tincd.8
-/usr/info/tinc.info.gz
projects / oweals / tinc.git / commitdiff