From 017320ead3a21415ab876012d1a2844e783c071f Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 21 May 2020 10:15:46 +0100 Subject: [PATCH] hostapd: bring back mesh patches Bring back 802.11s mesh features to the level previously available before the recent hostapd version bump. This is mostly to support use of 802.11s on DFS channels, but also making mesh forwarding configurable which is crucial for use of 802.11s MAC with other routing protocols, such as batman-adv, on top. While at it, fix new compiler warning by adapting 700-wifi-reload.patch to upstream changes, now building without any warnings again. Fixes: 0a3ec87a66 ("hostapd: update to latest Git hostap_2_9-1238-gdd2daf0848ed") Signed-off-by: Daniel Golle --- package/network/services/hostapd/Makefile | 2 +- ...ompletion-callback-to-complete-mesh-.patch | 124 ++++++++++ ...-frequency-as-pri-sec-channel-switch.patch | 26 +++ ...rnel-driver-DFS-handler-in-userspace.patch | 48 ++++ ...annel-attributes-before-running-Mesh.patch | 47 ++++ ...hannels-to-be-selected-if-dfs-is-ena.patch | 78 +++++++ ...-do-not-allow-pri-sec-channel-switch.patch | 29 +++ ...sh-do-not-use-offchan-mgmt-tx-on-DFS.patch | 52 +++++ ...-fix-channel-switch-error-during-CAC.patch | 61 +++++ ...18-mesh-make-forwarding-configurable.patch | 219 ++++++++++++++++++ .../hostapd/patches/200-multicall.patch | 34 +-- .../services/hostapd/patches/300-noscan.patch | 2 +- .../hostapd/patches/301-mesh-noscan.patch | 12 +- .../patches/310-rescan_immediately.patch | 2 +- .../patches/330-nl80211_fix_set_freq.patch | 2 +- .../patches/340-reload_freq_change.patch | 6 +- .../patches/350-nl80211_del_beacon_bss.patch | 10 +- .../patches/360-ctrl_iface_reload.patch | 2 +- .../hostapd/patches/370-ap_sta_support.patch | 22 +- .../patches/380-disable_ctrl_iface_mib.patch | 24 +- .../patches/420-indicate-features.patch | 4 +- ...dd-new-config-params-to-be-used-with.patch | 6 +- ...-use-new-parameters-during-ibss-join.patch | 4 +- .../patches/463-add-mcast_rate-to-11s.patch | 10 +- .../patches/464-fix-mesh-obss-check.patch | 2 +- .../patches/500-lto-jobserver-support.patch | 4 +- .../hostapd/patches/600-ubus_support.patch | 46 ++-- .../hostapd/patches/700-wifi-reload.patch | 22 +- 28 files changed, 792 insertions(+), 108 deletions(-) create mode 100644 package/network/services/hostapd/patches/004-mesh-use-setup-completion-callback-to-complete-mesh-.patch create mode 100644 package/network/services/hostapd/patches/005-mesh-update-ssid-frequency-as-pri-sec-channel-switch.patch create mode 100644 package/network/services/hostapd/patches/006-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch create mode 100644 package/network/services/hostapd/patches/007-mesh-apply-channel-attributes-before-running-Mesh.patch create mode 100644 package/network/services/hostapd/patches/011-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch create mode 100644 package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch create mode 100644 package/network/services/hostapd/patches/015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch create mode 100644 package/network/services/hostapd/patches/016-mesh-fix-channel-switch-error-during-CAC.patch create mode 100644 package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile index a2c5a34f2f..66560d5d41 100644 --- a/package/network/services/hostapd/Makefile +++ b/package/network/services/hostapd/Makefile @@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=hostapd -PKG_RELEASE:=1 +PKG_RELEASE:=2 PKG_SOURCE_URL:=http://w1.fi/hostap.git PKG_SOURCE_PROTO:=git diff --git a/package/network/services/hostapd/patches/004-mesh-use-setup-completion-callback-to-complete-mesh-.patch b/package/network/services/hostapd/patches/004-mesh-use-setup-completion-callback-to-complete-mesh-.patch new file mode 100644 index 0000000000..844437f74a --- /dev/null +++ b/package/network/services/hostapd/patches/004-mesh-use-setup-completion-callback-to-complete-mesh-.patch @@ -0,0 +1,124 @@ +From c05ace7510ead96e72b97ce47b33f7b5865d6d36 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:38 -0700 +Subject: [PATCH 1/7] mesh: use setup completion callback to complete mesh join + +mesh join function is the last function to be called during +mesh join process, but it's been called a bit earlier than +it's supposed to be, so that some mesh parameter values +such as VHT capabilities not applied correct when mesh join +is in process. +Moreover current design of mesh join that is called directly +after mesh initialization isn't suitable for DFS channels to use, +since mesh join process should be paused until DFS CAC is +done and resumed after it's done. +The callback will be called by hostapd_setup_interface_complete_sync. +There is possiblity that completing mesh init fails, so add error +handle codes. + +Signed-off-by: Peter Oh +Signed-off-by: Peter Oh +--- + src/ap/hostapd.c | 11 ++++++++++- + wpa_supplicant/mesh.c | 13 +++++++------ + 2 files changed, 17 insertions(+), 7 deletions(-) + +--- a/src/ap/hostapd.c ++++ b/src/ap/hostapd.c +@@ -434,6 +434,8 @@ static void hostapd_free_hapd_data(struc + #ifdef CONFIG_MESH + wpabuf_free(hapd->mesh_pending_auth); + hapd->mesh_pending_auth = NULL; ++ /* handling setup failure is already done */ ++ hapd->setup_complete_cb = NULL; + #endif /* CONFIG_MESH */ + + hostapd_clean_rrm(hapd); +@@ -2145,6 +2147,13 @@ dfs_offload: + if (hapd->setup_complete_cb) + hapd->setup_complete_cb(hapd->setup_complete_cb_ctx); + ++#ifdef CONFIG_MESH ++ if (delay_apply_cfg && !iface->mconf) { ++ wpa_printf(MSG_ERROR, "Error while completing mesh init"); ++ goto fail; ++ } ++#endif /* CONFIG_MESH */ ++ + wpa_printf(MSG_DEBUG, "%s: Setup of interface done.", + iface->bss[0]->conf->iface); + if (iface->interfaces && iface->interfaces->terminate_on_error > 0) +@@ -2288,7 +2297,7 @@ int hostapd_setup_interface(struct hosta + ret = setup_interface(iface); + if (ret) { + wpa_printf(MSG_ERROR, "%s: Unable to setup interface.", +- iface->bss[0]->conf->iface); ++ iface->conf ? iface->conf->bss[0]->iface : "N/A"); + return -1; + } + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -194,8 +194,9 @@ static int wpas_mesh_init_rsn(struct wpa + } + + +-static int wpas_mesh_complete(struct wpa_supplicant *wpa_s) ++static void wpas_mesh_complete_cb(void *ctx) + { ++ struct wpa_supplicant *wpa_s = ctx; + struct hostapd_iface *ifmsh = wpa_s->ifmsh; + struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params; + struct wpa_ssid *ssid = wpa_s->current_ssid; +@@ -204,7 +205,7 @@ static int wpas_mesh_complete(struct wpa + if (!params || !ssid || !ifmsh) { + wpa_printf(MSG_ERROR, "mesh: %s called without active mesh", + __func__); +- return -1; ++ return; + } + + if (ifmsh->mconf->security != MESH_CONF_SEC_NONE && +@@ -213,7 +214,7 @@ static int wpas_mesh_complete(struct wpa + "mesh: RSN initialization failed - deinit mesh"); + wpa_supplicant_mesh_deinit(wpa_s); + wpa_drv_leave_mesh(wpa_s); +- return -1; ++ return; + } + + if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) { +@@ -239,8 +240,6 @@ static int wpas_mesh_complete(struct wpa + + if (!ret) + wpa_supplicant_set_state(wpa_s, WPA_COMPLETED); +- +- return ret; + } + + +@@ -267,6 +266,7 @@ static int wpa_supplicant_mesh_init(stru + if (!ifmsh) + return -ENOMEM; + ++ ifmsh->owner = wpa_s; + ifmsh->drv_flags = wpa_s->drv_flags; + ifmsh->drv_flags2 = wpa_s->drv_flags2; + ifmsh->num_bss = 1; +@@ -285,6 +285,8 @@ static int wpa_supplicant_mesh_init(stru + bss->drv_priv = wpa_s->drv_priv; + bss->iface = ifmsh; + bss->mesh_sta_free_cb = mesh_mpm_free_sta; ++ bss->setup_complete_cb = wpas_mesh_complete_cb; ++ bss->setup_complete_cb_ctx = wpa_s; + frequency = ssid->frequency; + if (frequency != freq->freq && + frequency == freq->freq + freq->sec_channel_offset * 20) { +@@ -526,7 +528,6 @@ int wpa_supplicant_join_mesh(struct wpa_ + goto out; + } + +- ret = wpas_mesh_complete(wpa_s); + out: + return ret; + } diff --git a/package/network/services/hostapd/patches/005-mesh-update-ssid-frequency-as-pri-sec-channel-switch.patch b/package/network/services/hostapd/patches/005-mesh-update-ssid-frequency-as-pri-sec-channel-switch.patch new file mode 100644 index 0000000000..1167982ba5 --- /dev/null +++ b/package/network/services/hostapd/patches/005-mesh-update-ssid-frequency-as-pri-sec-channel-switch.patch @@ -0,0 +1,26 @@ +From c56f18380d1d404a2abc0ea5373d294508ef1e54 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:41 -0700 +Subject: [PATCH 2/7] mesh: update ssid->frequency as pri/sec channel switch + +ssid->frequency is one of variables used to gets channel +number from given frequency. Leave it as unchanged when +pri/sec channel switched will cause picking up wrong +channel number after applying secondary channel offset +for HT40 and leads failing interface bring-up. + +Signed-off-by: Peter Oh +--- + wpa_supplicant/mesh.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -292,6 +292,7 @@ static int wpa_supplicant_mesh_init(stru + frequency == freq->freq + freq->sec_channel_offset * 20) { + wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched"); + frequency = freq->freq; ++ ssid->frequency = frequency; + } + wpa_s->assoc_freq = frequency; + wpa_s->current_ssid = ssid; diff --git a/package/network/services/hostapd/patches/006-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch b/package/network/services/hostapd/patches/006-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch new file mode 100644 index 0000000000..8b1ce88864 --- /dev/null +++ b/package/network/services/hostapd/patches/006-mesh-inform-kernel-driver-DFS-handler-in-userspace.patch @@ -0,0 +1,48 @@ +From 593602b7f14be5c2695979639764b1c50f01bbec Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:49 -0700 +Subject: [PATCH 7/7] mesh: inform kernel driver DFS handler in userspace + +NL80211_ATTR_HANDLE_DFS is required by kerenel space +to enable DFS channels that indicates DFS handler +resides in userspace. + +Signed-off-by: Peter Oh +--- + src/drivers/driver.h | 1 + + src/drivers/driver_nl80211.c | 3 +++ + wpa_supplicant/mesh.c | 1 + + 3 files changed, 5 insertions(+) + +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -1542,6 +1542,7 @@ struct wpa_driver_mesh_join_params { + #define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004 + #define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008 + unsigned int flags; ++ u8 handle_dfs; + }; + + struct wpa_driver_set_key_params { +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -10038,6 +10038,9 @@ static int nl80211_join_mesh(struct i802 + + wpa_printf(MSG_DEBUG, " * flags=%08X", params->flags); + ++ if (params->handle_dfs) ++ if (nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS)) ++ goto fail; + container = nla_nest_start(msg, NL80211_ATTR_MESH_SETUP); + if (!container) + goto fail; +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -314,6 +314,7 @@ static int wpa_supplicant_mesh_init(stru + conf->country[0] = wpa_s->conf->country[0]; + conf->country[1] = wpa_s->conf->country[1]; + conf->country[2] = ' '; ++ wpa_s->mesh_params->handle_dfs = 1; + } + + bss->iconf = conf; diff --git a/package/network/services/hostapd/patches/007-mesh-apply-channel-attributes-before-running-Mesh.patch b/package/network/services/hostapd/patches/007-mesh-apply-channel-attributes-before-running-Mesh.patch new file mode 100644 index 0000000000..a0d20023be --- /dev/null +++ b/package/network/services/hostapd/patches/007-mesh-apply-channel-attributes-before-running-Mesh.patch @@ -0,0 +1,47 @@ +From 2564184440d9d6041d11a8c7d50b31368634c3bd Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:40 -0700 +Subject: [PATCH] mesh: Apply channel attributes before setup interface + +This helps mesh interface initialization with correct channel +parameters. + +Signed-off-by: Peter Oh +--- + wpa_supplicant/mesh.c | 11 ++++++++--- + 1 file changed, 8 insertions(+), 3 deletions(-) + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -253,7 +253,7 @@ static int wpa_supplicant_mesh_init(stru + struct mesh_conf *mconf; + int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 }; + int rate_len; +- int frequency; ++ int frequency, saved_freq; + + if (!wpa_s->conf->user_mpm) { + /* not much for us to do here */ +@@ -391,6 +391,13 @@ static int wpa_supplicant_mesh_init(stru + conf->basic_rates[rate_len] = -1; + } + ++ /* Handle pri/sec switch frequency within AP configuration parameter ++ * generation without changing the stored network profile in the end. */ ++ saved_freq = ssid->frequency; ++ ssid->frequency = frequency; ++ wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf); ++ ssid->frequency = saved_freq; ++ + if (wpa_drv_init_mesh(wpa_s)) { + wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver"); + return -1; +@@ -402,8 +409,6 @@ static int wpa_supplicant_mesh_init(stru + return -1; + } + +- wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf); +- + return 0; + out_free: + wpa_supplicant_mesh_deinit(wpa_s); diff --git a/package/network/services/hostapd/patches/011-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch b/package/network/services/hostapd/patches/011-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch new file mode 100644 index 0000000000..cc63576883 --- /dev/null +++ b/package/network/services/hostapd/patches/011-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch @@ -0,0 +1,78 @@ +From 89fa0d75fb1be82330258082ed3d7fd452eb6076 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:45 -0700 +Subject: [PATCH 3/7] mesh: Allow DFS channels to be selected if dfs is enabled + +Note: DFS is assumed to be usable if a country code has been set + +Signed-off-by: Benjamin Berg +Signed-off-by: Peter Oh +--- + wpa_supplicant/wpa_supplicant.c | 24 ++++++++++++++++++------ + 1 file changed, 18 insertions(+), 6 deletions(-) + +--- a/wpa_supplicant/wpa_supplicant.c ++++ b/wpa_supplicant/wpa_supplicant.c +@@ -2345,6 +2345,8 @@ void ibss_mesh_setup_freq(struct wpa_sup + int chwidth, seg0, seg1; + u32 vht_caps = 0; + int is_24ghz; ++ int dfs_enabled = wpa_s->conf->country[0] && ++ (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR); + + freq->freq = ssid->frequency; + +@@ -2432,8 +2434,11 @@ void ibss_mesh_setup_freq(struct wpa_sup + return; + + /* Check primary channel flags */ +- if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR)) ++ if (pri_chan->flag & HOSTAPD_CHAN_DISABLED) + return; ++ if (pri_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) ++ if (!dfs_enabled) ++ return; + + freq->channel = pri_chan->chan; + +@@ -2466,8 +2471,11 @@ void ibss_mesh_setup_freq(struct wpa_sup + return; + + /* Check secondary channel flags */ +- if (sec_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR)) ++ if (sec_chan->flag & HOSTAPD_CHAN_DISABLED) + return; ++ if (sec_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) ++ if (!dfs_enabled) ++ return; + + if (ht40 == -1) { + if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS)) +@@ -2560,8 +2568,11 @@ skip_ht40: + return; + + /* Back to HT configuration if channel not usable */ +- if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR)) ++ if (chan->flag & HOSTAPD_CHAN_DISABLED) + return; ++ if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) ++ if (!dfs_enabled) ++ return; + } + + chwidth = CHANWIDTH_80MHZ; +@@ -2581,10 +2592,11 @@ skip_ht40: + if (!chan) + continue; + +- if (chan->flag & (HOSTAPD_CHAN_DISABLED | +- HOSTAPD_CHAN_NO_IR | +- HOSTAPD_CHAN_RADAR)) ++ if (chan->flag & HOSTAPD_CHAN_DISABLED) + continue; ++ if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR)) ++ if (!dfs_enabled) ++ continue; + + /* Found a suitable second segment for 80+80 */ + chwidth = CHANWIDTH_80P80MHZ; diff --git a/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch b/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch new file mode 100644 index 0000000000..45c18fb3b6 --- /dev/null +++ b/package/network/services/hostapd/patches/013-mesh-do-not-allow-pri-sec-channel-switch.patch @@ -0,0 +1,29 @@ +From 4f4a9b9e2e61fba334a21dadea749e4b440f42e6 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:48 -0700 +Subject: [PATCH 6/7] mesh: don't allow pri/sec channel switch + +This limitation isn't backed by standard, but it is known that +mesh doesn't have capability to handle 20/40 coex change in +current implementation and it will not able to establish +PLINK when channel switch between primary and secondary happens. + +Since it's unknown when we will have the implementation of handling +20/40 coex change for mesh, it'd better to avoid them from happening +until standard based implementation is introduced. + +Signed-off-by: Peter Oh +--- + wpa_supplicant/mesh.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -391,6 +391,7 @@ static int wpa_supplicant_mesh_init(stru + conf->basic_rates[rate_len] = -1; + } + ++ conf->no_pri_sec_switch = 1; + /* Handle pri/sec switch frequency within AP configuration parameter + * generation without changing the stored network profile in the end. */ + saved_freq = ssid->frequency; diff --git a/package/network/services/hostapd/patches/015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch b/package/network/services/hostapd/patches/015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch new file mode 100644 index 0000000000..3d623a65b2 --- /dev/null +++ b/package/network/services/hostapd/patches/015-mesh-do-not-use-offchan-mgmt-tx-on-DFS.patch @@ -0,0 +1,52 @@ +From 71e9c65a7c8af90a5fd11072062b596421316452 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:46 -0700 +Subject: [PATCH 4/7] mesh: do not set offchanok on DFS channels in non-ETSI + +mac80211 does not allow mgmt tx to use off channel on +DFS channels in non-ETSI domain, because it will invalidate +CAC result on current operating channel. +(mac80211 commit: 34373d12f3cbb74960a73431138ef619d857996f) +Hence don't set offchanok for mgmt tx in case of DFS channels +in non-ETSI. + +Signed-off-by: Peter Oh +--- + src/drivers/driver_nl80211.c | 21 ++++++++++++++++++++- + 1 file changed, 20 insertions(+), 1 deletion(-) + +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -7788,6 +7788,10 @@ static int wpa_driver_nl80211_send_actio + u8 *buf; + struct ieee80211_hdr *hdr; + int offchanok = 1; ++ struct hostapd_hw_modes *modes; ++ int i; ++ u16 num_modes, flags; ++ u8 dfs_domain; + + if (is_ap_interface(drv->nlmode) && (int) freq == bss->freq && + bss->beacon_set) +@@ -7816,6 +7820,21 @@ static int wpa_driver_nl80211_send_actio + os_memset(bss->rand_addr, 0, ETH_ALEN); + } + ++ if (is_mesh_interface(drv->nlmode)) { ++ modes = nl80211_get_hw_feature_data(bss, &num_modes, ++ &flags, &dfs_domain); ++ if (dfs_domain != HOSTAPD_DFS_REGION_ETSI && ++ ieee80211_is_dfs(bss->freq, modes, num_modes)) ++ offchanok = 0; ++ if (modes) { ++ for (i = 0; i < num_modes; i++) { ++ os_free(modes[i].channels); ++ os_free(modes[i].rates); ++ } ++ os_free(modes); ++ } ++ } ++ + if (is_ap_interface(drv->nlmode) && + (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) || + (int) freq == bss->freq || drv->device_ap_sme || diff --git a/package/network/services/hostapd/patches/016-mesh-fix-channel-switch-error-during-CAC.patch b/package/network/services/hostapd/patches/016-mesh-fix-channel-switch-error-during-CAC.patch new file mode 100644 index 0000000000..6b52abf988 --- /dev/null +++ b/package/network/services/hostapd/patches/016-mesh-fix-channel-switch-error-during-CAC.patch @@ -0,0 +1,61 @@ +From 5913d6e2a741683e7c747c046f72ca790bbe1337 Mon Sep 17 00:00:00 2001 +From: Peter Oh +Date: Mon, 27 Aug 2018 14:28:47 -0700 +Subject: [PATCH 5/7] mesh: fix channel switch error during CAC + +Mesh interface has used its channel parameters that configured +during its initialization even after channel switched due to +DFS radar detection during CAC which caused channel switch error. +This change fixes the error by updating its channel parameters +when channel's been changed from initial one. + +Signed-off-by: Peter Oh +--- + wpa_supplicant/mesh.c | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -13,6 +13,7 @@ + #include "utils/uuid.h" + #include "common/ieee802_11_defs.h" + #include "common/wpa_ctrl.h" ++#include "common/hw_features_common.h" + #include "ap/sta_info.h" + #include "ap/hostapd.h" + #include "ap/ieee802_11.h" +@@ -208,6 +209,34 @@ static void wpas_mesh_complete_cb(void * + return; + } + ++ /* ++ * inspect if channel's been changed since initialized. ++ * i.e. DFS radar detection ++ */ ++ if (ifmsh->freq != params->freq.freq) { ++ wpa_s->assoc_freq = ifmsh->freq; ++ ssid->frequency = ifmsh->freq; ++ if (hostapd_set_freq_params(¶ms->freq, ++ ifmsh->conf->hw_mode, ++ ifmsh->freq, ++ ifmsh->conf->channel, ++ ifmsh->conf->enable_edmg, ++ ifmsh->conf->edmg_channel, ++ ifmsh->conf->ieee80211n, ++ ifmsh->conf->ieee80211ac, ++ ifmsh->conf->ieee80211ax, ++ ifmsh->conf->secondary_channel, ++ hostapd_get_oper_chwidth(ifmsh->conf), ++ hostapd_get_oper_centr_freq_seg0_idx(ifmsh->conf), ++ hostapd_get_oper_centr_freq_seg1_idx(ifmsh->conf), ++ ifmsh->current_mode->vht_capab, ++ &ifmsh->current_mode->he_capab[IEEE80211_MODE_AP])) { ++ wpa_printf(MSG_ERROR, "Error updating mesh frequency params."); ++ wpa_supplicant_mesh_deinit(wpa_s); ++ return; ++ } ++ } ++ + if (ifmsh->mconf->security != MESH_CONF_SEC_NONE && + wpas_mesh_init_rsn(wpa_s)) { + wpa_printf(MSG_ERROR, diff --git a/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch b/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch new file mode 100644 index 0000000000..f7ea9674da --- /dev/null +++ b/package/network/services/hostapd/patches/018-mesh-make-forwarding-configurable.patch @@ -0,0 +1,219 @@ +From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Wed, 18 Apr 2018 19:24:31 +0200 +Subject: [PATCH 18/18] mesh: make forwarding configurable + +Allow mesh_fwding to be specified in a mesh bss config, pass that +to the driver (only nl80211 implemented for now) and announce +forwarding capability accordingly. + +Signed-off-by: Daniel Golle +--- + src/ap/ap_config.h | 2 ++ + src/drivers/driver.h | 2 ++ + src/drivers/driver_nl80211.c | 3 +++ + wpa_supplicant/config.c | 4 ++++ + wpa_supplicant/config.h | 9 +++++++++ + wpa_supplicant/config_file.c | 4 ++++ + wpa_supplicant/config_ssid.h | 5 +++++ + wpa_supplicant/mesh.c | 6 ++++++ + wpa_supplicant/mesh_mpm.c | 4 ++-- + wpa_supplicant/wpa_supplicant.conf | 3 +++ + 10 files changed, 40 insertions(+), 2 deletions(-) + +--- a/src/ap/ap_config.h ++++ b/src/ap/ap_config.h +@@ -51,6 +51,7 @@ struct mesh_conf { + int dot11MeshRetryTimeout; /* msec */ + int dot11MeshConfirmTimeout; /* msec */ + int dot11MeshHoldingTimeout; /* msec */ ++ int mesh_fwding; + }; + + #define MAX_STA_COUNT 2007 +@@ -691,6 +692,7 @@ struct hostapd_bss_config { + + #define MESH_ENABLED BIT(0) + int mesh; ++ int mesh_fwding; + + u8 radio_measurements[RRM_CAPABILITIES_IE_LEN]; + +--- a/src/drivers/driver.h ++++ b/src/drivers/driver.h +@@ -1515,6 +1515,7 @@ struct wpa_driver_mesh_bss_params { + #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004 + #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008 + #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010 ++#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020 + /* + * TODO: Other mesh configuration parameters would go here. + * See NL80211_MESHCONF_* for all the mesh config parameters. +@@ -1524,6 +1525,7 @@ struct wpa_driver_mesh_bss_params { + int peer_link_timeout; + int max_peer_links; + int rssi_threshold; ++ int forwarding; + u16 ht_opmode; + }; + +--- a/src/drivers/driver_nl80211.c ++++ b/src/drivers/driver_nl80211.c +@@ -10006,6 +10006,9 @@ static int nl80211_put_mesh_config(struc + if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) && + nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS, + params->auto_plinks)) || ++ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) && ++ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING, ++ params->forwarding)) || + ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) && + nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS, + params->max_peer_links)) || +--- a/wpa_supplicant/config.c ++++ b/wpa_supplicant/config.c +@@ -2473,6 +2473,7 @@ static const struct parse_data ssid_fiel + #ifdef CONFIG_MESH + { INT_RANGE(mode, 0, 5) }, + { INT_RANGE(no_auto_peer, 0, 1) }, ++ { INT_RANGE(mesh_fwding, 0, 1) }, + { INT_RANGE(mesh_rssi_threshold, -255, 1) }, + #else /* CONFIG_MESH */ + { INT_RANGE(mode, 0, 4) }, +@@ -3046,6 +3047,7 @@ void wpa_config_set_network_defaults(str + ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT; + ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT; + ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT; ++ ssid->mesh_fwding = DEFAULT_MESH_FWDING; + ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD; + #endif /* CONFIG_MESH */ + #ifdef CONFIG_HT_OVERRIDES +@@ -4273,6 +4275,7 @@ struct wpa_config * wpa_config_alloc_emp + config->user_mpm = DEFAULT_USER_MPM; + config->max_peer_links = DEFAULT_MAX_PEER_LINKS; + config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY; ++ config->mesh_fwding = DEFAULT_MESH_FWDING; + config->dot11RSNASAERetransPeriod = + DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD; + config->fast_reauth = DEFAULT_FAST_REAUTH; +@@ -4911,6 +4914,7 @@ static const struct global_parse_data gl + { INT(user_mpm), 0 }, + { INT_RANGE(max_peer_links, 0, 255), 0 }, + { INT(mesh_max_inactivity), 0 }, ++ { INT_RANGE(mesh_fwding, 0, 1), 0 }, + { INT(dot11RSNASAERetransPeriod), 0 }, + #endif /* CONFIG_MESH */ + { INT(disable_scan_offload), 0 }, +--- a/wpa_supplicant/config.h ++++ b/wpa_supplicant/config.h +@@ -18,6 +18,7 @@ + #define DEFAULT_USER_MPM 1 + #define DEFAULT_MAX_PEER_LINKS 99 + #define DEFAULT_MESH_MAX_INACTIVITY 300 ++#define DEFAULT_MESH_FWDING 1 + /* + * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard, + * but use 1000 ms in practice to avoid issues on low power CPUs. +@@ -1351,6 +1352,14 @@ struct wpa_config { + int mesh_max_inactivity; + + /** ++ * mesh_fwding - Mesh network layer-2 forwarding ++ * ++ * This controls whether to enable layer-2 forwarding. ++ * By default: 1: enabled ++ */ ++ int mesh_fwding; ++ ++ /** + * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame + * + * This timeout value is used in mesh STA to retransmit +--- a/wpa_supplicant/config_file.c ++++ b/wpa_supplicant/config_file.c +@@ -866,6 +866,7 @@ static void wpa_config_write_network(FIL + #endif /* IEEE8021X_EAPOL */ + INT(mode); + INT(no_auto_peer); ++ INT(mesh_fwding); + INT(frequency); + INT(enable_edmg); + INT(edmg_channel); +@@ -1526,6 +1527,9 @@ static void wpa_config_write_global(FILE + fprintf(f, "mesh_max_inactivity=%d\n", + config->mesh_max_inactivity); + ++ if (config->mesh_fwding != DEFAULT_MESH_FWDING) ++ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding); ++ + if (config->dot11RSNASAERetransPeriod != + DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD) + fprintf(f, "dot11RSNASAERetransPeriod=%d\n", +--- a/wpa_supplicant/config_ssid.h ++++ b/wpa_supplicant/config_ssid.h +@@ -540,6 +540,11 @@ struct wpa_ssid { + int dot11MeshConfirmTimeout; /* msec */ + int dot11MeshHoldingTimeout; /* msec */ + ++ /** ++ * Mesh network layer-2 forwarding ++ */ ++ int mesh_fwding; ++ + int ht; + int ht40; + +--- a/wpa_supplicant/mesh.c ++++ b/wpa_supplicant/mesh.c +@@ -130,6 +130,7 @@ static struct mesh_conf * mesh_config_cr + conf->mesh_cc_id = 0; + conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET; + conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0; ++ conf->mesh_fwding = ssid->mesh_fwding; + conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries; + conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout; + conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout; +@@ -335,6 +336,7 @@ static int wpa_supplicant_mesh_init(stru + bss->conf->start_disabled = 1; + bss->conf->mesh = MESH_ENABLED; + bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity; ++ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding; + + if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes, + wpa_s->hw.num_modes) && wpa_s->conf->country[0]) { +@@ -556,6 +558,10 @@ int wpa_supplicant_join_mesh(struct wpa_ + } + params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity; + ++ /* always explicitely set forwarding to on or off for now */ ++ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING; ++ params->conf.forwarding = ssid->mesh_fwding; ++ + os_free(wpa_s->mesh_params); + wpa_s->mesh_params = params; + if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) { +--- a/wpa_supplicant/mesh_mpm.c ++++ b/wpa_supplicant/mesh_mpm.c +@@ -303,9 +303,9 @@ static void mesh_mpm_send_plink_action(s + info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1; + /* TODO: Add Connected to Mesh Gate/AS subfields */ + wpabuf_put_u8(buf, info); +- /* always forwarding & accepting plinks for now */ ++ /* set forwarding & always accepting plinks for now */ + wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER | +- MESH_CAP_FORWARDING); ++ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0)); + } else { /* Peer closing frame */ + /* IE: Mesh ID */ + wpabuf_put_u8(buf, WLAN_EID_MESH_ID); +--- a/wpa_supplicant/wpa_supplicant.conf ++++ b/wpa_supplicant/wpa_supplicant.conf +@@ -150,6 +150,9 @@ ap_scan=1 + # This timeout value is used in mesh STA to clean up inactive stations. + #mesh_max_inactivity=300 + ++# Enable 802.11s layer-2 routing and forwarding ++#mesh_fwding=1 ++ + # cert_in_cb - Whether to include a peer certificate dump in events + # This controls whether peer certificates for authentication server and + # its certificate chain are included in EAP peer certificate events. This is diff --git a/package/network/services/hostapd/patches/200-multicall.patch b/package/network/services/hostapd/patches/200-multicall.patch index 8459a02d16..ef28e191c9 100644 --- a/package/network/services/hostapd/patches/200-multicall.patch +++ b/package/network/services/hostapd/patches/200-multicall.patch @@ -36,7 +36,7 @@ LIBS += $(DRV_AP_LIBS) ifdef CONFIG_L2_PACKET -@@ -1294,6 +1300,12 @@ install: $(addprefix $(DESTDIR)$(BINDIR) +@@ -1300,6 +1306,12 @@ install: $(addprefix $(DESTDIR)$(BINDIR) BCHECK=../src/drivers/build.hostapd @@ -49,7 +49,7 @@ hostapd: $(BCHECK) $(OBJS) $(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS) @$(E) " LD " $@ -@@ -1335,6 +1347,12 @@ ifeq ($(CONFIG_TLS), linux) +@@ -1341,6 +1353,12 @@ ifeq ($(CONFIG_TLS), linux) HOBJS += ../src/crypto/crypto_linux.o endif @@ -72,7 +72,7 @@ ifndef CONFIG_NO_GITVER # Add VERSION_STR postfix for builds from a git repository -@@ -359,7 +360,9 @@ endif +@@ -365,7 +366,9 @@ endif ifdef CONFIG_IBSS_RSN NEED_RSN_AUTHENTICATOR=y CFLAGS += -DCONFIG_IBSS_RSN @@ -82,7 +82,7 @@ OBJS += ibss_rsn.o endif -@@ -880,6 +883,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS +@@ -886,6 +889,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS LIBS += -ldl -rdynamic endif @@ -93,7 +93,7 @@ endif ifdef CONFIG_AP -@@ -887,9 +894,11 @@ NEED_EAP_COMMON=y +@@ -893,9 +900,11 @@ NEED_EAP_COMMON=y NEED_RSN_AUTHENTICATOR=y CFLAGS += -DCONFIG_AP OBJS += ap.o @@ -105,7 +105,7 @@ OBJS += ../src/ap/hostapd.o OBJS += ../src/ap/wpa_auth_glue.o OBJS += ../src/ap/utils.o -@@ -969,6 +978,12 @@ endif +@@ -975,6 +984,12 @@ endif ifdef CONFIG_HS20 OBJS += ../src/ap/hs20.o endif @@ -118,7 +118,7 @@ endif ifdef CONFIG_MBO -@@ -977,7 +992,9 @@ CFLAGS += -DCONFIG_MBO +@@ -983,7 +998,9 @@ CFLAGS += -DCONFIG_MBO endif ifdef NEED_RSN_AUTHENTICATOR @@ -128,7 +128,7 @@ NEED_AES_WRAP=y OBJS += ../src/ap/wpa_auth.o OBJS += ../src/ap/wpa_auth_ie.o -@@ -1887,6 +1904,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv) +@@ -1893,6 +1910,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv) $(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config @@ -141,7 +141,7 @@ wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs) $(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS) @$(E) " LD " $@ -@@ -1987,6 +2010,12 @@ endif +@@ -1993,6 +2016,12 @@ endif $(Q)sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@ @$(E) " sed" $< @@ -156,7 +156,7 @@ wpa_cli.exe: wpa_cli --- a/src/drivers/driver.h +++ b/src/drivers/driver.h -@@ -5865,8 +5865,8 @@ union wpa_event_data { +@@ -5879,8 +5879,8 @@ union wpa_event_data { * Driver wrapper code should call this function whenever an event is received * from the driver. */ @@ -167,7 +167,7 @@ /** * wpa_supplicant_event_global - Report a driver event for wpa_supplicant -@@ -5878,7 +5878,7 @@ void wpa_supplicant_event(void *ctx, enu +@@ -5892,7 +5892,7 @@ void wpa_supplicant_event(void *ctx, enu * Same as wpa_supplicant_event(), but we search for the interface in * wpa_global. */ @@ -231,7 +231,7 @@ os_memset(&global, 0, sizeof(global)); --- a/wpa_supplicant/events.c +++ b/wpa_supplicant/events.c -@@ -4499,8 +4499,8 @@ static void wpas_event_unprot_beacon(str +@@ -4500,8 +4500,8 @@ static void wpas_event_unprot_beacon(str } @@ -242,7 +242,7 @@ { struct wpa_supplicant *wpa_s = ctx; int resched; -@@ -5313,7 +5313,7 @@ void wpa_supplicant_event(void *ctx, enu +@@ -5319,7 +5319,7 @@ void wpa_supplicant_event(void *ctx, enu } @@ -253,7 +253,7 @@ struct wpa_supplicant *wpa_s; --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -6571,7 +6571,6 @@ struct wpa_interface * wpa_supplicant_ma +@@ -6593,7 +6593,6 @@ struct wpa_interface * wpa_supplicant_ma return NULL; } @@ -261,7 +261,7 @@ /** * wpa_supplicant_match_existing - Match existing interfaces * @global: Pointer to global data from wpa_supplicant_init() -@@ -6608,6 +6607,11 @@ static int wpa_supplicant_match_existing +@@ -6630,6 +6629,11 @@ static int wpa_supplicant_match_existing #endif /* CONFIG_MATCH_IFACE */ @@ -273,7 +273,7 @@ /** * wpa_supplicant_add_iface - Add a new network interface -@@ -6864,6 +6868,8 @@ struct wpa_global * wpa_supplicant_init( +@@ -6886,6 +6890,8 @@ struct wpa_global * wpa_supplicant_init( #ifndef CONFIG_NO_WPA_MSG wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb); #endif /* CONFIG_NO_WPA_MSG */ @@ -296,7 +296,7 @@ #ifdef CONFIG_WPS static int gen_uuid(const char *txt_addr) -@@ -680,6 +685,8 @@ int main(int argc, char *argv[]) +@@ -684,6 +689,8 @@ int main(int argc, char *argv[]) return -1; #endif /* CONFIG_DPP */ diff --git a/package/network/services/hostapd/patches/300-noscan.patch b/package/network/services/hostapd/patches/300-noscan.patch index 80f9cf2a0b..53cf38c42e 100644 --- a/package/network/services/hostapd/patches/300-noscan.patch +++ b/package/network/services/hostapd/patches/300-noscan.patch @@ -13,7 +13,7 @@ } else if (os_strcmp(buf, "ht_capab") == 0) { --- a/src/ap/ap_config.h +++ b/src/ap/ap_config.h -@@ -972,6 +972,8 @@ struct hostapd_config { +@@ -974,6 +974,8 @@ struct hostapd_config { int ht_op_mode_fixed; u16 ht_capab; diff --git a/package/network/services/hostapd/patches/301-mesh-noscan.patch b/package/network/services/hostapd/patches/301-mesh-noscan.patch index a86070aa3a..33c481cc76 100644 --- a/package/network/services/hostapd/patches/301-mesh-noscan.patch +++ b/package/network/services/hostapd/patches/301-mesh-noscan.patch @@ -1,6 +1,6 @@ --- a/wpa_supplicant/config.c +++ b/wpa_supplicant/config.c -@@ -2477,6 +2477,7 @@ static const struct parse_data ssid_fiel +@@ -2478,6 +2478,7 @@ static const struct parse_data ssid_fiel #else /* CONFIG_MESH */ { INT_RANGE(mode, 0, 4) }, #endif /* CONFIG_MESH */ @@ -15,12 +15,12 @@ INT(mode); INT(no_auto_peer); + INT(noscan); + INT(mesh_fwding); INT(frequency); INT(enable_edmg); - INT(edmg_channel); --- a/wpa_supplicant/mesh.c +++ b/wpa_supplicant/mesh.c -@@ -333,6 +333,8 @@ static int wpa_supplicant_mesh_init(stru +@@ -368,6 +368,8 @@ static int wpa_supplicant_mesh_init(stru frequency); goto out_free; } @@ -31,7 +31,7 @@ if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) { --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -2331,12 +2331,12 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2334,12 +2334,12 @@ void ibss_mesh_setup_freq(struct wpa_sup int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode); enum hostapd_hw_mode hw_mode; struct hostapd_hw_modes *mode = NULL; @@ -46,7 +46,7 @@ unsigned int j, k; struct hostapd_freq_params vht_freq; int chwidth, seg0, seg1; -@@ -2416,7 +2416,7 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2421,7 +2421,7 @@ void ibss_mesh_setup_freq(struct wpa_sup #endif /* CONFIG_HE_OVERRIDES */ /* Setup higher BW only for 5 GHz */ @@ -57,7 +57,7 @@ for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) { --- a/wpa_supplicant/config_ssid.h +++ b/wpa_supplicant/config_ssid.h -@@ -960,6 +960,8 @@ struct wpa_ssid { +@@ -965,6 +965,8 @@ struct wpa_ssid { */ int no_auto_peer; diff --git a/package/network/services/hostapd/patches/310-rescan_immediately.patch b/package/network/services/hostapd/patches/310-rescan_immediately.patch index 25f0306f8f..7c065f55b3 100644 --- a/package/network/services/hostapd/patches/310-rescan_immediately.patch +++ b/package/network/services/hostapd/patches/310-rescan_immediately.patch @@ -1,6 +1,6 @@ --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -4926,7 +4926,7 @@ wpa_supplicant_alloc(struct wpa_supplica +@@ -4948,7 +4948,7 @@ wpa_supplicant_alloc(struct wpa_supplica if (wpa_s == NULL) return NULL; wpa_s->scan_req = INITIAL_SCAN_REQ; diff --git a/package/network/services/hostapd/patches/330-nl80211_fix_set_freq.patch b/package/network/services/hostapd/patches/330-nl80211_fix_set_freq.patch index e9fd27560f..5ad4ed801a 100644 --- a/package/network/services/hostapd/patches/330-nl80211_fix_set_freq.patch +++ b/package/network/services/hostapd/patches/330-nl80211_fix_set_freq.patch @@ -1,6 +1,6 @@ --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c -@@ -4639,7 +4639,7 @@ static int nl80211_set_channel(struct i8 +@@ -4645,7 +4645,7 @@ static int nl80211_set_channel(struct i8 freq->freq, freq->ht_enabled, freq->vht_enabled, freq->he_enabled, freq->bandwidth, freq->center_freq1, freq->center_freq2); diff --git a/package/network/services/hostapd/patches/340-reload_freq_change.patch b/package/network/services/hostapd/patches/340-reload_freq_change.patch index 09c6a4648d..e0e62c2a11 100644 --- a/package/network/services/hostapd/patches/340-reload_freq_change.patch +++ b/package/network/services/hostapd/patches/340-reload_freq_change.patch @@ -1,6 +1,6 @@ --- a/src/ap/hostapd.c +++ b/src/ap/hostapd.c -@@ -112,6 +112,28 @@ static void hostapd_reload_bss(struct ho +@@ -114,6 +114,28 @@ static void hostapd_reload_bss(struct ho #endif /* CONFIG_NO_RADIUS */ ssid = &hapd->conf->ssid; @@ -29,7 +29,7 @@ if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next && ssid->wpa_passphrase_set && ssid->wpa_passphrase) { /* -@@ -213,6 +235,7 @@ int hostapd_reload_config(struct hostapd +@@ -215,6 +237,7 @@ int hostapd_reload_config(struct hostapd struct hostapd_data *hapd = iface->bss[0]; struct hostapd_config *newconf, *oldconf; size_t j; @@ -37,7 +37,7 @@ if (iface->config_fname == NULL) { /* Only in-memory config in use - assume it has been updated */ -@@ -263,24 +286,20 @@ int hostapd_reload_config(struct hostapd +@@ -265,24 +288,20 @@ int hostapd_reload_config(struct hostapd } iface->conf = newconf; diff --git a/package/network/services/hostapd/patches/350-nl80211_del_beacon_bss.patch b/package/network/services/hostapd/patches/350-nl80211_del_beacon_bss.patch index 07b219efaf..876becfbc9 100644 --- a/package/network/services/hostapd/patches/350-nl80211_del_beacon_bss.patch +++ b/package/network/services/hostapd/patches/350-nl80211_del_beacon_bss.patch @@ -1,6 +1,6 @@ --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c -@@ -2778,10 +2778,15 @@ static int wpa_driver_nl80211_del_beacon +@@ -2787,10 +2787,15 @@ static int wpa_driver_nl80211_del_beacon struct nl_msg *msg; struct wpa_driver_nl80211_data *drv = bss->drv; @@ -18,7 +18,7 @@ return send_and_recv_msgs(drv, msg, NULL, NULL); } -@@ -5250,7 +5255,7 @@ static void nl80211_teardown_ap(struct i +@@ -5260,7 +5265,7 @@ static void nl80211_teardown_ap(struct i nl80211_mgmt_unsubscribe(bss, "AP teardown"); nl80211_put_wiphy_data_ap(bss); @@ -27,7 +27,7 @@ } -@@ -7631,8 +7636,6 @@ static int wpa_driver_nl80211_if_remove( +@@ -7678,8 +7683,6 @@ static int wpa_driver_nl80211_if_remove( } else { wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context"); nl80211_teardown_ap(bss); @@ -36,7 +36,7 @@ nl80211_destroy_bss(bss); if (!bss->added_if) i802_set_iface_flags(bss, 0); -@@ -8006,7 +8009,6 @@ static int wpa_driver_nl80211_deinit_ap( +@@ -8073,7 +8076,6 @@ static int wpa_driver_nl80211_deinit_ap( if (!is_ap_interface(drv->nlmode)) return -1; wpa_driver_nl80211_del_beacon(bss); @@ -44,7 +44,7 @@ /* * If the P2P GO interface was dynamically added, then it is -@@ -8026,7 +8028,6 @@ static int wpa_driver_nl80211_stop_ap(vo +@@ -8093,7 +8095,6 @@ static int wpa_driver_nl80211_stop_ap(vo if (!is_ap_interface(drv->nlmode)) return -1; wpa_driver_nl80211_del_beacon(bss); diff --git a/package/network/services/hostapd/patches/360-ctrl_iface_reload.patch b/package/network/services/hostapd/patches/360-ctrl_iface_reload.patch index 3d9b99510f..7692a29157 100644 --- a/package/network/services/hostapd/patches/360-ctrl_iface_reload.patch +++ b/package/network/services/hostapd/patches/360-ctrl_iface_reload.patch @@ -78,7 +78,7 @@ #ifdef NEED_AP_MLME static int hostapd_ctrl_iface_sa_query(struct hostapd_data *hapd, -@@ -3499,6 +3556,8 @@ static int hostapd_ctrl_iface_receive_pr +@@ -3527,6 +3584,8 @@ static int hostapd_ctrl_iface_receive_pr } else if (os_strncmp(buf, "VENDOR ", 7) == 0) { reply_len = hostapd_ctrl_iface_vendor(hapd, buf + 7, reply, reply_size); diff --git a/package/network/services/hostapd/patches/370-ap_sta_support.patch b/package/network/services/hostapd/patches/370-ap_sta_support.patch index f678c66478..670d0a52a1 100644 --- a/package/network/services/hostapd/patches/370-ap_sta_support.patch +++ b/package/network/services/hostapd/patches/370-ap_sta_support.patch @@ -183,7 +183,7 @@ wpa_s->new_connection = 1; wpa_drv_set_operstate(wpa_s, 0); #ifndef IEEE8021X_EAPOL -@@ -2222,6 +2274,8 @@ void wpa_supplicant_associate(struct wpa +@@ -2225,6 +2277,8 @@ void wpa_supplicant_associate(struct wpa wpa_ssid_txt(ssid->ssid, ssid->ssid_len), ssid->id); wpas_notify_mesh_group_started(wpa_s, ssid); @@ -192,7 +192,7 @@ #else /* CONFIG_MESH */ wpa_msg(wpa_s, MSG_ERROR, "mesh mode support not included in the build"); -@@ -6184,6 +6238,16 @@ static int wpa_supplicant_init_iface(str +@@ -6206,6 +6260,16 @@ static int wpa_supplicant_init_iface(str sizeof(wpa_s->bridge_ifname)); } @@ -209,7 +209,7 @@ /* RSNA Supplicant Key Management - INITIALIZE */ eapol_sm_notify_portEnabled(wpa_s->eapol, false); eapol_sm_notify_portValid(wpa_s->eapol, false); -@@ -6517,6 +6581,11 @@ static void wpa_supplicant_deinit_iface( +@@ -6539,6 +6603,11 @@ static void wpa_supplicant_deinit_iface( if (terminate) wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING); @@ -246,7 +246,7 @@ --- a/hostapd/ctrl_iface.c +++ b/hostapd/ctrl_iface.c -@@ -2665,6 +2665,11 @@ static int hostapd_ctrl_iface_chan_switc +@@ -2693,6 +2693,11 @@ static int hostapd_ctrl_iface_chan_switc return 0; } @@ -260,7 +260,7 @@ /* Save CHAN_SWITCH VHT config */ --- a/src/ap/beacon.c +++ b/src/ap/beacon.c -@@ -1460,11 +1460,6 @@ int ieee802_11_set_beacon(struct hostapd +@@ -1468,11 +1468,6 @@ int ieee802_11_set_beacon(struct hostapd struct wpabuf *beacon, *proberesp, *assocresp; int res, ret = -1; @@ -274,7 +274,7 @@ if (ieee802_11_build_ap_params(hapd, ¶ms) < 0) --- a/wpa_supplicant/events.c +++ b/wpa_supplicant/events.c -@@ -4499,6 +4499,60 @@ static void wpas_event_unprot_beacon(str +@@ -4500,6 +4500,60 @@ static void wpas_event_unprot_beacon(str } @@ -335,7 +335,7 @@ void supplicant_event(void *ctx, enum wpa_event_type event, union wpa_event_data *data) { -@@ -4801,8 +4855,10 @@ void supplicant_event(void *ctx, enum wp +@@ -4802,8 +4856,10 @@ void supplicant_event(void *ctx, enum wp channel_width_to_string(data->ch_switch.ch_width), data->ch_switch.cf1, data->ch_switch.cf2); @@ -349,7 +349,7 @@ wpa_s->current_ssid->frequency = data->ch_switch.freq; --- a/src/drivers/driver.h +++ b/src/drivers/driver.h -@@ -5669,6 +5669,7 @@ union wpa_event_data { +@@ -5683,6 +5683,7 @@ union wpa_event_data { /** * struct ch_switch @@ -357,7 +357,7 @@ * @freq: Frequency of new channel in MHz * @ht_enabled: Whether this is an HT channel * @ch_offset: Secondary channel offset -@@ -5677,6 +5678,7 @@ union wpa_event_data { +@@ -5691,6 +5692,7 @@ union wpa_event_data { * @cf2: Center frequency 2 */ struct ch_switch { @@ -385,7 +385,7 @@ if (finished) bss->freq = data.ch_switch.freq; -@@ -2689,6 +2691,7 @@ static void do_process_drv_event(struct +@@ -2686,6 +2688,7 @@ static void do_process_drv_event(struct tb[NL80211_ATTR_CHANNEL_WIDTH], tb[NL80211_ATTR_CENTER_FREQ1], tb[NL80211_ATTR_CENTER_FREQ2], @@ -393,7 +393,7 @@ 0); break; case NL80211_CMD_CH_SWITCH_NOTIFY: -@@ -2699,6 +2702,7 @@ static void do_process_drv_event(struct +@@ -2696,6 +2699,7 @@ static void do_process_drv_event(struct tb[NL80211_ATTR_CHANNEL_WIDTH], tb[NL80211_ATTR_CENTER_FREQ1], tb[NL80211_ATTR_CENTER_FREQ2], diff --git a/package/network/services/hostapd/patches/380-disable_ctrl_iface_mib.patch b/package/network/services/hostapd/patches/380-disable_ctrl_iface_mib.patch index 5d29884e8d..2b904d1199 100644 --- a/package/network/services/hostapd/patches/380-disable_ctrl_iface_mib.patch +++ b/package/network/services/hostapd/patches/380-disable_ctrl_iface_mib.patch @@ -12,7 +12,7 @@ else --- a/hostapd/ctrl_iface.c +++ b/hostapd/ctrl_iface.c -@@ -3323,6 +3323,7 @@ static int hostapd_ctrl_iface_receive_pr +@@ -3351,6 +3351,7 @@ static int hostapd_ctrl_iface_receive_pr reply_size); } else if (os_strcmp(buf, "STATUS-DRIVER") == 0) { reply_len = hostapd_drv_status(hapd, reply, reply_size); @@ -20,7 +20,7 @@ } else if (os_strcmp(buf, "MIB") == 0) { reply_len = ieee802_11_get_mib(hapd, reply, reply_size); if (reply_len >= 0) { -@@ -3364,6 +3365,7 @@ static int hostapd_ctrl_iface_receive_pr +@@ -3392,6 +3393,7 @@ static int hostapd_ctrl_iface_receive_pr } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply, reply_size); @@ -30,7 +30,7 @@ reply_len = -1; --- a/wpa_supplicant/Makefile +++ b/wpa_supplicant/Makefile -@@ -942,6 +942,9 @@ ifdef CONFIG_FILS +@@ -948,6 +948,9 @@ ifdef CONFIG_FILS OBJS += ../src/ap/fils_hlp.o endif ifdef CONFIG_CTRL_IFACE @@ -42,7 +42,7 @@ --- a/wpa_supplicant/ctrl_iface.c +++ b/wpa_supplicant/ctrl_iface.c -@@ -2257,7 +2257,7 @@ static int wpa_supplicant_ctrl_iface_sta +@@ -2261,7 +2261,7 @@ static int wpa_supplicant_ctrl_iface_sta pos += ret; } @@ -51,7 +51,7 @@ if (wpa_s->ap_iface) { pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos, end - pos, -@@ -10172,6 +10172,7 @@ char * wpa_supplicant_ctrl_iface_process +@@ -10243,6 +10243,7 @@ char * wpa_supplicant_ctrl_iface_process reply_len = -1; } else if (os_strncmp(buf, "NOTE ", 5) == 0) { wpa_printf(MSG_INFO, "NOTE: %s", buf + 5); @@ -59,7 +59,7 @@ } else if (os_strcmp(buf, "MIB") == 0) { reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size); if (reply_len >= 0) { -@@ -10184,6 +10185,7 @@ char * wpa_supplicant_ctrl_iface_process +@@ -10255,6 +10256,7 @@ char * wpa_supplicant_ctrl_iface_process reply_size - reply_len); #endif /* CONFIG_MACSEC */ } @@ -67,7 +67,7 @@ } else if (os_strncmp(buf, "STATUS", 6) == 0) { reply_len = wpa_supplicant_ctrl_iface_status( wpa_s, buf + 6, reply, reply_size); -@@ -10668,6 +10670,7 @@ char * wpa_supplicant_ctrl_iface_process +@@ -10739,6 +10741,7 @@ char * wpa_supplicant_ctrl_iface_process reply_len = wpa_supplicant_ctrl_iface_bss( wpa_s, buf + 4, reply, reply_size); #ifdef CONFIG_AP @@ -75,7 +75,7 @@ } else if (os_strcmp(buf, "STA-FIRST") == 0) { reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size); } else if (os_strncmp(buf, "STA ", 4) == 0) { -@@ -10676,12 +10679,15 @@ char * wpa_supplicant_ctrl_iface_process +@@ -10747,12 +10750,15 @@ char * wpa_supplicant_ctrl_iface_process } else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) { reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply, reply_size); @@ -144,7 +144,7 @@ static void ieee802_1x_wnm_notif_send(void *eloop_ctx, void *timeout_ctx) --- a/src/ap/wpa_auth.c +++ b/src/ap/wpa_auth.c -@@ -4351,6 +4351,7 @@ static const char * wpa_bool_txt(int val +@@ -4391,6 +4391,7 @@ static const char * wpa_bool_txt(int val return val ? "TRUE" : "FALSE"; } @@ -152,7 +152,7 @@ #define RSN_SUITE "%02x-%02x-%02x-%d" #define RSN_SUITE_ARG(s) \ -@@ -4501,7 +4502,7 @@ int wpa_get_mib_sta(struct wpa_state_mac +@@ -4541,7 +4542,7 @@ int wpa_get_mib_sta(struct wpa_state_mac return len; } @@ -163,7 +163,7 @@ { --- a/src/rsn_supp/wpa.c +++ b/src/rsn_supp/wpa.c -@@ -2680,6 +2680,8 @@ static u32 wpa_key_mgmt_suite(struct wpa +@@ -2717,6 +2717,8 @@ static u32 wpa_key_mgmt_suite(struct wpa } @@ -172,7 +172,7 @@ #define RSN_SUITE "%02x-%02x-%02x-%d" #define RSN_SUITE_ARG(s) \ ((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff -@@ -2761,6 +2763,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch +@@ -2798,6 +2800,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch return (int) len; } diff --git a/package/network/services/hostapd/patches/420-indicate-features.patch b/package/network/services/hostapd/patches/420-indicate-features.patch index 67a33967f5..9f216347f4 100644 --- a/package/network/services/hostapd/patches/420-indicate-features.patch +++ b/package/network/services/hostapd/patches/420-indicate-features.patch @@ -8,7 +8,7 @@ #include "crypto/random.h" #include "crypto/tls.h" #include "common/version.h" -@@ -688,7 +689,7 @@ int main(int argc, char *argv[]) +@@ -692,7 +693,7 @@ int main(int argc, char *argv[]) wpa_supplicant_event = hostapd_wpa_event; wpa_supplicant_event_global = hostapd_wpa_event_global; for (;;) { @@ -17,7 +17,7 @@ if (c < 0) break; switch (c) { -@@ -725,6 +726,8 @@ int main(int argc, char *argv[]) +@@ -729,6 +730,8 @@ int main(int argc, char *argv[]) break; #endif /* CONFIG_DEBUG_LINUX_TRACING */ case 'v': diff --git a/package/network/services/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch b/package/network/services/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch index 762f9d649f..0a512a48a1 100644 --- a/package/network/services/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch +++ b/package/network/services/hostapd/patches/460-wpa_supplicant-add-new-config-params-to-be-used-with.patch @@ -140,7 +140,7 @@ Signed-hostap: Antonio Quartulli /* Helper macros for network block parser */ #ifdef OFFSET -@@ -2551,6 +2643,8 @@ static const struct parse_data ssid_fiel +@@ -2552,6 +2644,8 @@ static const struct parse_data ssid_fiel { INT(ap_max_inactivity) }, { INT(dtim_period) }, { INT(beacon_int) }, @@ -162,7 +162,7 @@ Signed-hostap: Antonio Quartulli #define DEFAULT_EAP_WORKAROUND ((unsigned int) -1) -@@ -832,6 +834,9 @@ struct wpa_ssid { +@@ -837,6 +839,9 @@ struct wpa_ssid { */ void *parent_cred; @@ -174,7 +174,7 @@ Signed-hostap: Antonio Quartulli * macsec_policy - Determines the policy for MACsec secure session --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -3615,6 +3615,12 @@ static void wpas_start_assoc_cb(struct w +@@ -3637,6 +3637,12 @@ static void wpas_start_assoc_cb(struct w params.beacon_int = ssid->beacon_int; else params.beacon_int = wpa_s->conf->beacon_int; diff --git a/package/network/services/hostapd/patches/461-driver_nl80211-use-new-parameters-during-ibss-join.patch b/package/network/services/hostapd/patches/461-driver_nl80211-use-new-parameters-during-ibss-join.patch index 1d3d46dd26..955e15e307 100644 --- a/package/network/services/hostapd/patches/461-driver_nl80211-use-new-parameters-during-ibss-join.patch +++ b/package/network/services/hostapd/patches/461-driver_nl80211-use-new-parameters-during-ibss-join.patch @@ -10,7 +10,7 @@ Signed-hostap: Antonio Quartulli --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c -@@ -5573,7 +5573,7 @@ static int wpa_driver_nl80211_ibss(struc +@@ -5583,7 +5583,7 @@ static int wpa_driver_nl80211_ibss(struc struct wpa_driver_associate_params *params) { struct nl_msg *msg; @@ -19,7 +19,7 @@ Signed-hostap: Antonio Quartulli int count = 0; wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex); -@@ -5600,6 +5600,37 @@ retry: +@@ -5610,6 +5610,37 @@ retry: nl80211_put_beacon_int(msg, params->beacon_int)) goto fail; diff --git a/package/network/services/hostapd/patches/463-add-mcast_rate-to-11s.patch b/package/network/services/hostapd/patches/463-add-mcast_rate-to-11s.patch index 9ee60b1a63..473f3c786c 100644 --- a/package/network/services/hostapd/patches/463-add-mcast_rate-to-11s.patch +++ b/package/network/services/hostapd/patches/463-add-mcast_rate-to-11s.patch @@ -19,17 +19,17 @@ Tested-by: Simon Wunderlich --- a/src/drivers/driver.h +++ b/src/drivers/driver.h -@@ -1546,6 +1546,7 @@ struct wpa_driver_mesh_join_params { - #define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004 +@@ -1549,6 +1549,7 @@ struct wpa_driver_mesh_join_params { #define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008 unsigned int flags; + u8 handle_dfs; + int mcast_rate; }; struct wpa_driver_set_key_params { --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c -@@ -9959,6 +9959,18 @@ static int nl80211_put_mesh_id(struct nl +@@ -10026,6 +10026,18 @@ static int nl80211_put_mesh_id(struct nl } @@ -48,7 +48,7 @@ Tested-by: Simon Wunderlich static int nl80211_put_mesh_config(struct nl_msg *msg, struct wpa_driver_mesh_bss_params *params) { -@@ -10017,6 +10029,7 @@ static int nl80211_join_mesh(struct i802 +@@ -10087,6 +10099,7 @@ static int nl80211_join_mesh(struct i802 nl80211_put_basic_rates(msg, params->basic_rates) || nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) || nl80211_put_beacon_int(msg, params->beacon_int) || @@ -58,7 +58,7 @@ Tested-by: Simon Wunderlich --- a/wpa_supplicant/mesh.c +++ b/wpa_supplicant/mesh.c -@@ -460,6 +460,7 @@ int wpa_supplicant_join_mesh(struct wpa_ +@@ -501,6 +501,7 @@ int wpa_supplicant_join_mesh(struct wpa_ params->meshid = ssid->ssid; params->meshid_len = ssid->ssid_len; diff --git a/package/network/services/hostapd/patches/464-fix-mesh-obss-check.patch b/package/network/services/hostapd/patches/464-fix-mesh-obss-check.patch index 17c9837969..6d48175163 100644 --- a/package/network/services/hostapd/patches/464-fix-mesh-obss-check.patch +++ b/package/network/services/hostapd/patches/464-fix-mesh-obss-check.patch @@ -1,6 +1,6 @@ --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -2402,11 +2402,13 @@ void ibss_mesh_setup_freq(struct wpa_sup +@@ -2407,11 +2407,13 @@ void ibss_mesh_setup_freq(struct wpa_sup for (j = 0; j < wpa_s->last_scan_res_used; j++) { struct wpa_bss *bss = wpa_s->last_scan_res[j]; diff --git a/package/network/services/hostapd/patches/500-lto-jobserver-support.patch b/package/network/services/hostapd/patches/500-lto-jobserver-support.patch index 1da40367aa..223c43cfde 100644 --- a/package/network/services/hostapd/patches/500-lto-jobserver-support.patch +++ b/package/network/services/hostapd/patches/500-lto-jobserver-support.patch @@ -1,6 +1,6 @@ --- a/hostapd/Makefile +++ b/hostapd/Makefile -@@ -1310,14 +1310,14 @@ hostapd_multi.a: $(BCHECK) $(OBJS) +@@ -1316,14 +1316,14 @@ hostapd_multi.a: $(BCHECK) $(OBJS) @$(AR) cr $@ hostapd_multi.o $(OBJS) hostapd: $(BCHECK) $(OBJS) @@ -19,7 +19,7 @@ NOBJS = nt_password_hash.o ../src/crypto/ms_funcs.o $(SHA1OBJS) --- a/wpa_supplicant/Makefile +++ b/wpa_supplicant/Makefile -@@ -1920,23 +1920,23 @@ wpa_supplicant_multi.a: .config $(BCHECK +@@ -1926,23 +1926,23 @@ wpa_supplicant_multi.a: .config $(BCHECK @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS) wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs) diff --git a/package/network/services/hostapd/patches/600-ubus_support.patch b/package/network/services/hostapd/patches/600-ubus_support.patch index c4cf2a4cde..23bdaa7a1b 100644 --- a/package/network/services/hostapd/patches/600-ubus_support.patch +++ b/package/network/services/hostapd/patches/600-ubus_support.patch @@ -39,7 +39,7 @@ int interface_added; /* virtual interface added for this BSS */ unsigned int started:1; unsigned int disabled:1; -@@ -588,6 +590,7 @@ hostapd_alloc_bss_data(struct hostapd_if +@@ -603,6 +605,7 @@ hostapd_alloc_bss_data(struct hostapd_if struct hostapd_bss_config *bss); int hostapd_setup_interface(struct hostapd_iface *iface); int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err); @@ -49,7 +49,7 @@ struct hostapd_iface * hostapd_alloc_iface(void); --- a/src/ap/hostapd.c +++ b/src/ap/hostapd.c -@@ -391,6 +391,7 @@ static void hostapd_free_hapd_data(struc +@@ -395,6 +395,7 @@ static void hostapd_free_hapd_data(struc hapd->beacon_set_done = 0; wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface); @@ -57,7 +57,7 @@ accounting_deinit(hapd); hostapd_deinit_wpa(hapd); vlan_deinit(hapd); -@@ -1392,6 +1393,8 @@ static int hostapd_setup_bss(struct host +@@ -1413,6 +1414,8 @@ static int hostapd_setup_bss(struct host if (hapd->driver && hapd->driver->set_operstate) hapd->driver->set_operstate(hapd->drv_priv, 1); @@ -66,7 +66,7 @@ return 0; } -@@ -1967,6 +1970,7 @@ static int hostapd_setup_interface_compl +@@ -1988,6 +1991,7 @@ static int hostapd_setup_interface_compl if (err) goto fail; @@ -74,7 +74,7 @@ wpa_printf(MSG_DEBUG, "Completing interface initialization"); if (iface->freq) { #ifdef NEED_AP_MLME -@@ -2157,6 +2161,7 @@ dfs_offload: +@@ -2185,6 +2189,7 @@ dfs_offload: fail: wpa_printf(MSG_ERROR, "Interface initialization failed"); @@ -82,7 +82,7 @@ hostapd_set_state(iface, HAPD_IFACE_DISABLED); wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED); #ifdef CONFIG_FST -@@ -2630,6 +2635,7 @@ void hostapd_interface_deinit_free(struc +@@ -2658,6 +2663,7 @@ void hostapd_interface_deinit_free(struc (unsigned int) iface->conf->num_bss); driver = iface->bss[0]->driver; drv_priv = iface->bss[0]->drv_priv; @@ -126,7 +126,7 @@ if (res == HOSTAPD_ACL_PENDING) return; -@@ -4078,7 +4090,7 @@ static void handle_assoc(struct hostapd_ +@@ -4087,7 +4099,7 @@ static void handle_assoc(struct hostapd_ int resp = WLAN_STATUS_SUCCESS; u16 reply_res; const u8 *pos; @@ -135,7 +135,7 @@ struct sta_info *sta; u8 *tmp = NULL; #ifdef CONFIG_FILS -@@ -4291,6 +4303,11 @@ static void handle_assoc(struct hostapd_ +@@ -4300,6 +4312,11 @@ static void handle_assoc(struct hostapd_ left = res; } #endif /* CONFIG_FILS */ @@ -147,7 +147,7 @@ /* followed by SSID and Supported rates; and HT capabilities if 802.11n * is used */ -@@ -4455,6 +4472,14 @@ static void handle_assoc(struct hostapd_ +@@ -4464,6 +4481,14 @@ static void handle_assoc(struct hostapd_ pos, left, rssi, omit_rsnxe); os_free(tmp); @@ -162,7 +162,7 @@ /* * Remove the station in case tranmission of a success response fails * (the STA was added associated to the driver) or if the station was -@@ -4482,6 +4507,7 @@ static void handle_disassoc(struct hosta +@@ -4491,6 +4516,7 @@ static void handle_disassoc(struct hosta wpa_printf(MSG_DEBUG, "disassocation: STA=" MACSTR " reason_code=%d", MAC2STR(mgmt->sa), le_to_host16(mgmt->u.disassoc.reason_code)); @@ -170,7 +170,7 @@ sta = ap_get_sta(hapd, mgmt->sa); if (sta == NULL) { -@@ -4548,6 +4574,8 @@ static void handle_deauth(struct hostapd +@@ -4557,6 +4583,8 @@ static void handle_deauth(struct hostapd " reason_code=%d", MAC2STR(mgmt->sa), le_to_host16(mgmt->u.deauth.reason_code)); @@ -181,7 +181,7 @@ wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR " trying " --- a/src/ap/beacon.c +++ b/src/ap/beacon.c -@@ -810,6 +810,12 @@ void handle_probe_req(struct hostapd_dat +@@ -814,6 +814,12 @@ void handle_probe_req(struct hostapd_dat u16 csa_offs[2]; size_t csa_offs_len; struct radius_sta rad_info; @@ -194,7 +194,7 @@ if (len < IEEE80211_HDRLEN) return; -@@ -992,6 +998,12 @@ void handle_probe_req(struct hostapd_dat +@@ -996,6 +1002,12 @@ void handle_probe_req(struct hostapd_dat } #endif /* CONFIG_P2P */ @@ -235,7 +235,7 @@ wpabuf_free(sta->p2p_ie); --- a/src/ap/sta_info.c +++ b/src/ap/sta_info.c -@@ -423,6 +423,7 @@ void ap_handle_timer(void *eloop_ctx, vo +@@ -424,6 +424,7 @@ void ap_handle_timer(void *eloop_ctx, vo HOSTAPD_LEVEL_INFO, "deauthenticated due to " "local deauth request"); ap_free_sta(hapd, sta); @@ -243,7 +243,7 @@ return; } -@@ -578,6 +579,7 @@ skip_poll: +@@ -579,6 +580,7 @@ skip_poll: hapd, sta, WLAN_REASON_PREV_AUTH_NOT_VALID); ap_free_sta(hapd, sta); @@ -251,7 +251,7 @@ break; } } -@@ -1293,6 +1295,7 @@ void ap_sta_set_authorized(struct hostap +@@ -1294,6 +1296,7 @@ void ap_sta_set_authorized(struct hostap buf, ip_addr, keyid_buf); } else { wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED "%s", buf); @@ -284,7 +284,7 @@ ifdef CONFIG_CODE_COVERAGE CFLAGS += -O0 -fprofile-arcs -ftest-coverage LIBS += -lgcov -@@ -877,6 +883,9 @@ OBJS += ../src/pae/ieee802_1x_secy_ops.o +@@ -883,6 +889,9 @@ OBJS += ../src/pae/ieee802_1x_secy_ops.o ifdef CONFIG_AP OBJS += ../src/ap/wpa_auth_kay.o endif @@ -296,7 +296,7 @@ ifdef CONFIG_IEEE8021X_EAPOL --- a/wpa_supplicant/wpa_supplicant.c +++ b/wpa_supplicant/wpa_supplicant.c -@@ -6771,6 +6771,8 @@ struct wpa_supplicant * wpa_supplicant_a +@@ -6793,6 +6793,8 @@ struct wpa_supplicant * wpa_supplicant_a } #endif /* CONFIG_P2P */ @@ -305,7 +305,7 @@ return wpa_s; } -@@ -6797,6 +6799,8 @@ int wpa_supplicant_remove_iface(struct w +@@ -6819,6 +6821,8 @@ int wpa_supplicant_remove_iface(struct w struct wpa_supplicant *parent = wpa_s->parent; #endif /* CONFIG_MESH */ @@ -314,7 +314,7 @@ /* Remove interface from the global list of interfaces */ prev = global->ifaces; if (prev == wpa_s) { -@@ -7100,8 +7104,12 @@ int wpa_supplicant_run(struct wpa_global +@@ -7122,8 +7126,12 @@ int wpa_supplicant_run(struct wpa_global eloop_register_signal_terminate(wpa_supplicant_terminate, global); eloop_register_signal_reconfig(wpa_supplicant_reconfig, global); @@ -364,7 +364,7 @@ #ifndef WPS_PIN_SCAN_IGNORE_SEL_REG -@@ -388,6 +389,8 @@ static int wpa_supplicant_wps_cred(void +@@ -392,6 +393,8 @@ static int wpa_supplicant_wps_cred(void wpa_hexdump_key(MSG_DEBUG, "WPS: Received Credential attribute", cred->cred_attr, cred->cred_attr_len); @@ -375,7 +375,7 @@ --- a/hostapd/main.c +++ b/hostapd/main.c -@@ -892,6 +892,7 @@ int main(int argc, char *argv[]) +@@ -896,6 +896,7 @@ int main(int argc, char *argv[]) } hostapd_global_ctrl_iface_init(&interfaces); @@ -383,7 +383,7 @@ if (hostapd_global_run(&interfaces, daemonize, pid_file)) { wpa_printf(MSG_ERROR, "Failed to start eloop"); -@@ -901,6 +902,7 @@ int main(int argc, char *argv[]) +@@ -905,6 +906,7 @@ int main(int argc, char *argv[]) ret = 0; out: diff --git a/package/network/services/hostapd/patches/700-wifi-reload.patch b/package/network/services/hostapd/patches/700-wifi-reload.patch index 053dcdad83..82e5c806d4 100644 --- a/package/network/services/hostapd/patches/700-wifi-reload.patch +++ b/package/network/services/hostapd/patches/700-wifi-reload.patch @@ -38,7 +38,7 @@ os_free(conf->basic_rates); --- a/src/ap/ap_config.h +++ b/src/ap/ap_config.h -@@ -859,6 +859,7 @@ struct hostapd_bss_config { +@@ -861,6 +861,7 @@ struct hostapd_bss_config { */ u8 mka_psk_set; #endif /* CONFIG_MACSEC */ @@ -46,7 +46,7 @@ }; /** -@@ -1050,6 +1051,7 @@ struct hostapd_config { +@@ -1052,6 +1053,7 @@ struct hostapd_config { unsigned int airtime_update_interval; #define AIRTIME_MODE_MAX (__AIRTIME_MODE_MAX - 1) #endif /* CONFIG_AIRTIME_POLICY */ @@ -56,7 +56,7 @@ --- a/src/ap/hostapd.c +++ b/src/ap/hostapd.c -@@ -216,6 +216,10 @@ static int hostapd_iface_conf_changed(st +@@ -218,6 +218,10 @@ static int hostapd_iface_conf_changed(st { size_t i; @@ -67,7 +67,7 @@ if (newconf->num_bss != oldconf->num_bss) return 1; -@@ -229,7 +233,7 @@ static int hostapd_iface_conf_changed(st +@@ -231,7 +235,7 @@ static int hostapd_iface_conf_changed(st } @@ -76,7 +76,7 @@ { struct hapd_interfaces *interfaces = iface->interfaces; struct hostapd_data *hapd = iface->bss[0]; -@@ -252,13 +256,16 @@ int hostapd_reload_config(struct hostapd +@@ -254,13 +258,16 @@ int hostapd_reload_config(struct hostapd if (newconf == NULL) return -1; @@ -95,7 +95,7 @@ wpa_printf(MSG_DEBUG, "Configuration changes include interface/BSS modification - force full disable+enable sequence"); fname = os_strdup(iface->config_fname); -@@ -283,6 +290,24 @@ int hostapd_reload_config(struct hostapd +@@ -285,6 +292,24 @@ int hostapd_reload_config(struct hostapd wpa_printf(MSG_ERROR, "Failed to enable interface on config reload"); return res; @@ -114,13 +114,13 @@ + * items (e.g., open/close sockets, etc.) */ + radius_client_flush(iface->bss[j]->radius, 0); +#endif /* CONFIG_NO_RADIUS */ -+ wpa_printf(MSG_INFO, "bss %d changed", j); ++ wpa_printf(MSG_INFO, "bss %zu changed", j); + } + } } iface->conf = newconf; -@@ -299,6 +324,12 @@ int hostapd_reload_config(struct hostapd +@@ -301,6 +326,12 @@ int hostapd_reload_config(struct hostapd for (j = 0; j < iface->num_bss; j++) { hapd = iface->bss[j]; @@ -133,7 +133,7 @@ hapd->iconf = newconf; hapd->conf = newconf->bss[j]; hostapd_reload_bss(hapd); -@@ -2329,6 +2360,10 @@ hostapd_alloc_bss_data(struct hostapd_if +@@ -2355,6 +2386,10 @@ hostapd_alloc_bss_data(struct hostapd_if hapd->iconf = conf; hapd->conf = bss; hapd->iface = hapd_iface; @@ -163,7 +163,7 @@ int interface_added; /* virtual interface added for this BSS */ unsigned int started:1; unsigned int disabled:1; -@@ -582,7 +583,7 @@ struct hostapd_iface { +@@ -597,7 +598,7 @@ struct hostapd_iface { int hostapd_for_each_interface(struct hapd_interfaces *interfaces, int (*cb)(struct hostapd_iface *iface, void *ctx), void *ctx); @@ -174,7 +174,7 @@ hostapd_alloc_bss_data(struct hostapd_iface *hapd_iface, --- a/src/drivers/driver_nl80211.c +++ b/src/drivers/driver_nl80211.c -@@ -4486,6 +4486,9 @@ static int wpa_driver_nl80211_set_ap(voi +@@ -4492,6 +4492,9 @@ static int wpa_driver_nl80211_set_ap(voi if (ret) { wpa_printf(MSG_DEBUG, "nl80211: Beacon set failed: %d (%s)", ret, strerror(-ret)); -- 2.25.1