ath79: add support for the TP-LINK WBS510 V1
authorAndrew Cameron <apcameron@softhome.net>
Fri, 8 Nov 2019 03:36:02 +0000 (21:36 -0600)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Fri, 22 Nov 2019 10:41:27 +0000 (11:41 +0100)
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts [new file with mode: 0644]
target/linux/ath79/generic/base-files/etc/board.d/01_leds
target/linux/ath79/generic/base-files/etc/board.d/02_network
target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
target/linux/ath79/image/generic-tp-link.mk
tools/firmware-utils/src/tplink-safeloader.c

diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v1.dts
new file mode 100644 (file)
index 0000000..ba6fab2
--- /dev/null
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpexxx-v1.dtsi"
+
+/ {
+       compatible = "tplink,wbs510-v1", "qca,ar9344";
+       model = "TP-Link WBS510 v1";
+};
+
+&led_link4 {
+       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
index 5bb1d92a609e87c2808dcf381caed87f15494f47..c914090cf9e5ac0e6fdba1cb9a9e08e1b0e6f000 100755 (executable)
@@ -176,6 +176,7 @@ tplink,cpe220-v2|\
 tplink,cpe220-v3|\
 tplink,cpe510-v1|\
 tplink,wbs210-v2|\
+tplink,wbs510-v1|\
 tplink,wbs510-v2)
        ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
        ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
index dcc0b8be23dfc1f82325a61a0aa7c599e1a3aa49..06e2ae4cc0cf658b5136149fd219decccd44ce23 100755 (executable)
@@ -92,6 +92,7 @@ ath79_setup_interfaces()
        tplink,cpe220-v3|\
        tplink,cpe510-v1|\
        tplink,wbs210-v2|\
+       tplink,wbs510-v1|\
        tplink,wbs510-v2|\
        ubnt,nanostation-m|\
        ubnt,routerstation)
index 844b212152c83db9f998e81349527513999d2028..967e2c76801e946ae7b4073f3ee27c1bbdfd751e 100755 (executable)
@@ -47,6 +47,7 @@ tplink,cpe220-v2|\
 tplink,cpe220-v3|\
 tplink,cpe510-v1|\
 tplink,wbs210-v2|\
+tplink,wbs510-v1|\
 tplink,wbs510-v2)
        ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
        ;;
index 6efed954e436b344b6815818b8d7042bb017552b..eeaeaf53f45c0ca4547d14cc428fc4fadf3c3be7 100644 (file)
@@ -549,6 +549,18 @@ define Device/tplink_wbs210-v2
 endef
 TARGET_DEVICES += tplink_wbs210-v2
 
+define Device/tplink_wbs510-v1
+  $(Device/tplink-loader-okli)
+  ATH_SOC := ar9344
+  IMAGE_SIZE := 7680k
+  DEVICE_MODEL := WBS510
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := rssileds
+  TPLINK_BOARD_ID := WBS510
+  SUPPORTED_DEVICES += wbs510
+endef
+TARGET_DEVICES += tplink_wbs510-v1
+
 define Device/tplink_wbs510-v2
   $(Device/tplink-loader-okli)
   ATH_SOC := ar9344
index 89955725d07cc88fccb5a3529a6d3e7292bdf2ba..4e85bd59cab525efba07480e7df86ab313c8c859 100644 (file)
@@ -545,7 +545,8 @@ static struct device_info boards[] = {
                        "SupportList:\r\n"
                        "WBS510(TP-LINK|UN|N300-5):1.20\r\n"
                        "WBS510(TP-LINK|US|N300-5):1.20\r\n"
-                       "WBS510(TP-LINK|EU|N300-5):1.20\r\n",
+                       "WBS510(TP-LINK|EU|N300-5):1.20\r\n"
+                       "WBS510(TP-LINK|CA|N300-5):1.20\r\n",
                .support_trail = '\xff',
                .soft_ver = NULL,