include $(TOPDIR)/rules.mk
PKG_NAME:=hostapd
-PKG_RELEASE:=10
+PKG_RELEASE:=1
PKG_SOURCE_URL:=http://w1.fi/hostap.git
PKG_SOURCE_PROTO:=git
-PKG_SOURCE_DATE:=2019-08-08
-PKG_SOURCE_VERSION:=ca8c2bd28ad53f431d6ee60ef754e98cfdb4c17b
-PKG_MIRROR_HASH:=9d9f1c60afa5324ee17219bd3ec61c1a6fa4043b4187da9bb44e59025d3ed31d
+PKG_SOURCE_DATE:=2020-05-20
+PKG_SOURCE_VERSION:=dd2daf0848ed8854065cc5cfca07a0538cd380af
+PKG_MIRROR_HASH:=5f198ba4f9098e8bddb32e41f82a24d0510c6e25317a86dcfafc70fb8db260e2
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_LICENSE:=BSD-3-Clause
+++ /dev/null
-From c05ace7510ead96e72b97ce47b33f7b5865d6d36 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:38 -0700
-Subject: [PATCH 1/7] mesh: use setup completion callback to complete mesh join
-
-mesh join function is the last function to be called during
-mesh join process, but it's been called a bit earlier than
-it's supposed to be, so that some mesh parameter values
-such as VHT capabilities not applied correct when mesh join
-is in process.
-Moreover current design of mesh join that is called directly
-after mesh initialization isn't suitable for DFS channels to use,
-since mesh join process should be paused until DFS CAC is
-done and resumed after it's done.
-The callback will be called by hostapd_setup_interface_complete_sync.
-There is possiblity that completing mesh init fails, so add error
-handle codes.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- src/ap/hostapd.c | 11 ++++++++++-
- wpa_supplicant/mesh.c | 13 +++++++------
- 2 files changed, 17 insertions(+), 7 deletions(-)
-
---- a/src/ap/hostapd.c
-+++ b/src/ap/hostapd.c
-@@ -423,6 +423,8 @@ static void hostapd_free_hapd_data(struc
- #ifdef CONFIG_MESH
- wpabuf_free(hapd->mesh_pending_auth);
- hapd->mesh_pending_auth = NULL;
-+ /* handling setup failure is already done */
-+ hapd->setup_complete_cb = NULL;
- #endif /* CONFIG_MESH */
-
- hostapd_clean_rrm(hapd);
-@@ -2049,6 +2051,13 @@ dfs_offload:
- if (hapd->setup_complete_cb)
- hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
-
-+#ifdef CONFIG_MESH
-+ if (delay_apply_cfg && !iface->mconf) {
-+ wpa_printf(MSG_ERROR, "Error while completing mesh init");
-+ goto fail;
-+ }
-+#endif /* CONFIG_MESH */
-+
- wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
- iface->bss[0]->conf->iface);
- if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
-@@ -2192,7 +2201,7 @@ int hostapd_setup_interface(struct hosta
- ret = setup_interface(iface);
- if (ret) {
- wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
-- iface->bss[0]->conf->iface);
-+ iface->conf ? iface->conf->bss[0]->iface : "N/A");
- return -1;
- }
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -190,8 +190,9 @@ static int wpas_mesh_init_rsn(struct wpa
- }
-
-
--static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
-+static void wpas_mesh_complete_cb(void *ctx)
- {
-+ struct wpa_supplicant *wpa_s = ctx;
- struct hostapd_iface *ifmsh = wpa_s->ifmsh;
- struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
- struct wpa_ssid *ssid = wpa_s->current_ssid;
-@@ -200,7 +201,7 @@ static int wpas_mesh_complete(struct wpa
- if (!params || !ssid || !ifmsh) {
- wpa_printf(MSG_ERROR, "mesh: %s called without active mesh",
- __func__);
-- return -1;
-+ return;
- }
-
- if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
-@@ -209,7 +210,7 @@ static int wpas_mesh_complete(struct wpa
- "mesh: RSN initialization failed - deinit mesh");
- wpa_supplicant_mesh_deinit(wpa_s);
- wpa_drv_leave_mesh(wpa_s);
-- return -1;
-+ return;
- }
-
- if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
-@@ -235,8 +236,6 @@ static int wpas_mesh_complete(struct wpa
-
- if (!ret)
- wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
--
-- return ret;
- }
-
-
-@@ -263,6 +262,7 @@ static int wpa_supplicant_mesh_init(stru
- if (!ifmsh)
- return -ENOMEM;
-
-+ ifmsh->owner = wpa_s;
- ifmsh->drv_flags = wpa_s->drv_flags;
- ifmsh->num_bss = 1;
- ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
-@@ -280,6 +280,8 @@ static int wpa_supplicant_mesh_init(stru
- bss->drv_priv = wpa_s->drv_priv;
- bss->iface = ifmsh;
- bss->mesh_sta_free_cb = mesh_mpm_free_sta;
-+ bss->setup_complete_cb = wpas_mesh_complete_cb;
-+ bss->setup_complete_cb_ctx = wpa_s;
- frequency = ssid->frequency;
- if (frequency != freq->freq &&
- frequency == freq->freq + freq->sec_channel_offset * 20) {
-@@ -521,7 +523,6 @@ int wpa_supplicant_join_mesh(struct wpa_
- goto out;
- }
-
-- ret = wpas_mesh_complete(wpa_s);
- out:
- return ret;
- }
+++ /dev/null
-From c56f18380d1d404a2abc0ea5373d294508ef1e54 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:41 -0700
-Subject: [PATCH 2/7] mesh: update ssid->frequency as pri/sec channel switch
-
-ssid->frequency is one of variables used to gets channel
-number from given frequency. Leave it as unchanged when
-pri/sec channel switched will cause picking up wrong
-channel number after applying secondary channel offset
-for HT40 and leads failing interface bring-up.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/mesh.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -287,6 +287,7 @@ static int wpa_supplicant_mesh_init(stru
- frequency == freq->freq + freq->sec_channel_offset * 20) {
- wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
- frequency = freq->freq;
-+ ssid->frequency = frequency;
- }
- wpa_s->assoc_freq = frequency;
- wpa_s->current_ssid = ssid;
+++ /dev/null
-From 593602b7f14be5c2695979639764b1c50f01bbec Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:49 -0700
-Subject: [PATCH 7/7] mesh: inform kernel driver DFS handler in userspace
-
-NL80211_ATTR_HANDLE_DFS is required by kerenel space
-to enable DFS channels that indicates DFS handler
-resides in userspace.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- src/drivers/driver.h | 1 +
- src/drivers/driver_nl80211.c | 3 +++
- wpa_supplicant/mesh.c | 1 +
- 3 files changed, 5 insertions(+)
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1477,6 +1477,7 @@ struct wpa_driver_mesh_join_params {
- #define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004
- #define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008
- unsigned int flags;
-+ u8 handle_dfs;
- };
-
- /**
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -9624,6 +9624,9 @@ static int nl80211_join_mesh(struct i802
-
- wpa_printf(MSG_DEBUG, " * flags=%08X", params->flags);
-
-+ if (params->handle_dfs)
-+ if (nla_put_flag(msg, NL80211_ATTR_HANDLE_DFS))
-+ goto fail;
- container = nla_nest_start(msg, NL80211_ATTR_MESH_SETUP);
- if (!container)
- goto fail;
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -309,6 +309,7 @@ static int wpa_supplicant_mesh_init(stru
- conf->country[0] = wpa_s->conf->country[0];
- conf->country[1] = wpa_s->conf->country[1];
- conf->country[2] = ' ';
-+ wpa_s->mesh_params->handle_dfs = 1;
- }
-
- bss->iconf = conf;
+++ /dev/null
-From 2564184440d9d6041d11a8c7d50b31368634c3bd Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:40 -0700
-Subject: [PATCH] mesh: Apply channel attributes before setup interface
-
-This helps mesh interface initialization with correct channel
-parameters.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/mesh.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -249,7 +249,7 @@ static int wpa_supplicant_mesh_init(stru
- struct mesh_conf *mconf;
- int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
- int rate_len;
-- int frequency;
-+ int frequency, saved_freq;
-
- if (!wpa_s->conf->user_mpm) {
- /* not much for us to do here */
-@@ -386,6 +386,13 @@ static int wpa_supplicant_mesh_init(stru
- conf->basic_rates[rate_len] = -1;
- }
-
-+ /* Handle pri/sec switch frequency within AP configuration parameter
-+ * generation without changing the stored network profile in the end. */
-+ saved_freq = ssid->frequency;
-+ ssid->frequency = frequency;
-+ wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
-+ ssid->frequency = saved_freq;
-+
- if (wpa_drv_init_mesh(wpa_s)) {
- wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
- return -1;
-@@ -397,8 +404,6 @@ static int wpa_supplicant_mesh_init(stru
- return -1;
- }
-
-- wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
--
- return 0;
- out_free:
- wpa_supplicant_mesh_deinit(wpa_s);
+++ /dev/null
-From 89fa0d75fb1be82330258082ed3d7fd452eb6076 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:45 -0700
-Subject: [PATCH 3/7] mesh: Allow DFS channels to be selected if dfs is enabled
-
-Note: DFS is assumed to be usable if a country code has been set
-
-Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/wpa_supplicant.c | 24 ++++++++++++++++++------
- 1 file changed, 18 insertions(+), 6 deletions(-)
-
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2153,6 +2153,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
- struct hostapd_freq_params vht_freq;
- int chwidth, seg0, seg1;
- u32 vht_caps = 0;
-+ int dfs_enabled = wpa_s->conf->country[0] &&
-+ (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
-
- freq->freq = ssid->frequency;
-
-@@ -2232,8 +2234,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
- return;
-
- /* Check primary channel flags */
-- if (pri_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+ if (pri_chan->flag & HOSTAPD_CHAN_DISABLED)
- return;
-+ if (pri_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+ if (!dfs_enabled)
-+ return;
-
- freq->channel = pri_chan->chan;
-
-@@ -2264,8 +2269,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
- return;
-
- /* Check secondary channel flags */
-- if (sec_chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+ if (sec_chan->flag & HOSTAPD_CHAN_DISABLED)
- return;
-+ if (sec_chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+ if (!dfs_enabled)
-+ return;
-
- if (ht40 == -1) {
- if (!(pri_chan->flag & HOSTAPD_CHAN_HT40MINUS))
-@@ -2356,8 +2364,11 @@ skip_ht40:
- return;
-
- /* Back to HT configuration if channel not usable */
-- if (chan->flag & (HOSTAPD_CHAN_DISABLED | HOSTAPD_CHAN_NO_IR))
-+ if (chan->flag & HOSTAPD_CHAN_DISABLED)
- return;
-+ if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+ if (!dfs_enabled)
-+ return;
- }
-
- chwidth = CHANWIDTH_80MHZ;
-@@ -2377,10 +2388,11 @@ skip_ht40:
- if (!chan)
- continue;
-
-- if (chan->flag & (HOSTAPD_CHAN_DISABLED |
-- HOSTAPD_CHAN_NO_IR |
-- HOSTAPD_CHAN_RADAR))
-+ if (chan->flag & HOSTAPD_CHAN_DISABLED)
- continue;
-+ if (chan->flag & (HOSTAPD_CHAN_RADAR | HOSTAPD_CHAN_NO_IR))
-+ if (!dfs_enabled)
-+ continue;
-
- /* Found a suitable second segment for 80+80 */
- chwidth = CHANWIDTH_80P80MHZ;
+++ /dev/null
-From 4f4a9b9e2e61fba334a21dadea749e4b440f42e6 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:48 -0700
-Subject: [PATCH 6/7] mesh: don't allow pri/sec channel switch
-
-This limitation isn't backed by standard, but it is known that
-mesh doesn't have capability to handle 20/40 coex change in
-current implementation and it will not able to establish
-PLINK when channel switch between primary and secondary happens.
-
-Since it's unknown when we will have the implementation of handling
-20/40 coex change for mesh, it'd better to avoid them from happening
-until standard based implementation is introduced.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/mesh.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -386,6 +386,7 @@ static int wpa_supplicant_mesh_init(stru
- conf->basic_rates[rate_len] = -1;
- }
-
-+ conf->no_pri_sec_switch = 1;
- /* Handle pri/sec switch frequency within AP configuration parameter
- * generation without changing the stored network profile in the end. */
- saved_freq = ssid->frequency;
+++ /dev/null
-From 71e9c65a7c8af90a5fd11072062b596421316452 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:46 -0700
-Subject: [PATCH 4/7] mesh: do not set offchanok on DFS channels in non-ETSI
-
-mac80211 does not allow mgmt tx to use off channel on
-DFS channels in non-ETSI domain, because it will invalidate
-CAC result on current operating channel.
-(mac80211 commit: 34373d12f3cbb74960a73431138ef619d857996f)
-Hence don't set offchanok for mgmt tx in case of DFS channels
-in non-ETSI.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- src/drivers/driver_nl80211.c | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -7462,6 +7462,10 @@ static int wpa_driver_nl80211_send_actio
- int ret = -1;
- u8 *buf;
- struct ieee80211_hdr *hdr;
-+ struct hostapd_hw_modes *modes;
-+ int i, offchanok = 1;
-+ u16 num_modes, flags;
-+ u8 dfs_domain;
-
- wpa_printf(MSG_DEBUG, "nl80211: Send Action frame (ifindex=%d, "
- "freq=%u MHz wait=%d ms no_cck=%d)",
-@@ -7486,6 +7490,21 @@ static int wpa_driver_nl80211_send_actio
- os_memset(bss->rand_addr, 0, ETH_ALEN);
- }
-
-+ if (is_mesh_interface(drv->nlmode)) {
-+ modes = nl80211_get_hw_feature_data(bss, &num_modes,
-+ &flags, &dfs_domain);
-+ if (dfs_domain != HOSTAPD_DFS_REGION_ETSI &&
-+ ieee80211_is_dfs(bss->freq, modes, num_modes))
-+ offchanok = 0;
-+ if (modes) {
-+ for (i = 0; i < num_modes; i++) {
-+ os_free(modes[i].channels);
-+ os_free(modes[i].rates);
-+ }
-+ os_free(modes);
-+ }
-+ }
-+
- if (is_ap_interface(drv->nlmode) &&
- (!(drv->capa.flags & WPA_DRIVER_FLAGS_OFFCHANNEL_TX) ||
- (int) freq == bss->freq || drv->device_ap_sme ||
-@@ -7497,7 +7516,7 @@ static int wpa_driver_nl80211_send_actio
- ret = nl80211_send_frame_cmd(bss, freq, wait_time, buf,
- 24 + data_len,
- &drv->send_action_cookie,
-- no_cck, 0, 1, NULL, 0);
-+ no_cck, 0, offchanok, NULL, 0);
-
- os_free(buf);
- return ret;
+++ /dev/null
-From 5913d6e2a741683e7c747c046f72ca790bbe1337 Mon Sep 17 00:00:00 2001
-From: Peter Oh <peter.oh@bowerswilkins.com>
-Date: Mon, 27 Aug 2018 14:28:47 -0700
-Subject: [PATCH 5/7] mesh: fix channel switch error during CAC
-
-Mesh interface has used its channel parameters that configured
-during its initialization even after channel switched due to
-DFS radar detection during CAC which caused channel switch error.
-This change fixes the error by updating its channel parameters
-when channel's been changed from initial one.
-
-Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
----
- wpa_supplicant/mesh.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -13,6 +13,7 @@
- #include "utils/uuid.h"
- #include "common/ieee802_11_defs.h"
- #include "common/wpa_ctrl.h"
-+#include "common/hw_features_common.h"
- #include "ap/sta_info.h"
- #include "ap/hostapd.h"
- #include "ap/ieee802_11.h"
-@@ -204,6 +205,32 @@ static void wpas_mesh_complete_cb(void *
- return;
- }
-
-+ /*
-+ * inspect if channel's been changed since initialized.
-+ * i.e. DFS radar detection
-+ */
-+ if (ifmsh->freq != params->freq.freq) {
-+ wpa_s->assoc_freq = ifmsh->freq;
-+ ssid->frequency = ifmsh->freq;
-+ if (hostapd_set_freq_params(¶ms->freq,
-+ ifmsh->conf->hw_mode,
-+ ifmsh->freq,
-+ ifmsh->conf->channel,
-+ ifmsh->conf->ieee80211n,
-+ ifmsh->conf->ieee80211ac,
-+ ifmsh->conf->ieee80211ax,
-+ ifmsh->conf->secondary_channel,
-+ hostapd_get_oper_chwidth(ifmsh->conf),
-+ hostapd_get_oper_centr_freq_seg0_idx(ifmsh->conf),
-+ hostapd_get_oper_centr_freq_seg1_idx(ifmsh->conf),
-+ ifmsh->current_mode->vht_capab,
-+ &ifmsh->current_mode->he_capab[IEEE80211_MODE_AP])) {
-+ wpa_printf(MSG_ERROR, "Error updating mesh frequency params.");
-+ wpa_supplicant_mesh_deinit(wpa_s);
-+ return;
-+ }
-+ }
-+
- if (ifmsh->mconf->security != MESH_CONF_SEC_NONE &&
- wpas_mesh_init_rsn(wpa_s)) {
- wpa_printf(MSG_ERROR,
+++ /dev/null
-From 90fe6429624fc48bc0e5d2d7eeecb7498708b5e3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Apr 2018 19:24:31 +0200
-Subject: [PATCH 18/18] mesh: make forwarding configurable
-
-Allow mesh_fwding to be specified in a mesh bss config, pass that
-to the driver (only nl80211 implemented for now) and announce
-forwarding capability accordingly.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- src/ap/ap_config.h | 2 ++
- src/drivers/driver.h | 2 ++
- src/drivers/driver_nl80211.c | 3 +++
- wpa_supplicant/config.c | 4 ++++
- wpa_supplicant/config.h | 9 +++++++++
- wpa_supplicant/config_file.c | 4 ++++
- wpa_supplicant/config_ssid.h | 5 +++++
- wpa_supplicant/mesh.c | 6 ++++++
- wpa_supplicant/mesh_mpm.c | 4 ++--
- wpa_supplicant/wpa_supplicant.conf | 3 +++
- 10 files changed, 40 insertions(+), 2 deletions(-)
-
---- a/src/ap/ap_config.h
-+++ b/src/ap/ap_config.h
-@@ -51,6 +51,7 @@ struct mesh_conf {
- int dot11MeshRetryTimeout; /* msec */
- int dot11MeshConfirmTimeout; /* msec */
- int dot11MeshHoldingTimeout; /* msec */
-+ int mesh_fwding;
- };
-
- #define MAX_STA_COUNT 2007
-@@ -666,6 +667,7 @@ struct hostapd_bss_config {
-
- #define MESH_ENABLED BIT(0)
- int mesh;
-+ int mesh_fwding;
-
- u8 radio_measurements[RRM_CAPABILITIES_IE_LEN];
-
---- a/src/drivers/driver.h
-+++ b/src/drivers/driver.h
-@@ -1450,6 +1450,7 @@ struct wpa_driver_mesh_bss_params {
- #define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS 0x00000004
- #define WPA_DRIVER_MESH_CONF_FLAG_HT_OP_MODE 0x00000008
- #define WPA_DRIVER_MESH_CONF_FLAG_RSSI_THRESHOLD 0x00000010
-+#define WPA_DRIVER_MESH_CONF_FLAG_FORWARDING 0x00000020
- /*
- * TODO: Other mesh configuration parameters would go here.
- * See NL80211_MESHCONF_* for all the mesh config parameters.
-@@ -1459,6 +1460,7 @@ struct wpa_driver_mesh_bss_params {
- int peer_link_timeout;
- int max_peer_links;
- int rssi_threshold;
-+ int forwarding;
- u16 ht_opmode;
- };
-
---- a/src/drivers/driver_nl80211.c
-+++ b/src/drivers/driver_nl80211.c
-@@ -9592,6 +9592,9 @@ static int nl80211_put_mesh_config(struc
- if (((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
- nla_put_u8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
- params->auto_plinks)) ||
-+ ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_FORWARDING) &&
-+ nla_put_u8(msg, NL80211_MESHCONF_FORWARDING,
-+ params->forwarding)) ||
- ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
- nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
- params->max_peer_links)) ||
---- a/wpa_supplicant/config.c
-+++ b/wpa_supplicant/config.c
-@@ -2307,6 +2307,7 @@ static const struct parse_data ssid_fiel
- #ifdef CONFIG_MESH
- { INT_RANGE(mode, 0, 5) },
- { INT_RANGE(no_auto_peer, 0, 1) },
-+ { INT_RANGE(mesh_fwding, 0, 1) },
- { INT_RANGE(mesh_rssi_threshold, -255, 1) },
- #else /* CONFIG_MESH */
- { INT_RANGE(mode, 0, 4) },
-@@ -2869,6 +2870,7 @@ void wpa_config_set_network_defaults(str
- ssid->dot11MeshRetryTimeout = DEFAULT_MESH_RETRY_TIMEOUT;
- ssid->dot11MeshConfirmTimeout = DEFAULT_MESH_CONFIRM_TIMEOUT;
- ssid->dot11MeshHoldingTimeout = DEFAULT_MESH_HOLDING_TIMEOUT;
-+ ssid->mesh_fwding = DEFAULT_MESH_FWDING;
- ssid->mesh_rssi_threshold = DEFAULT_MESH_RSSI_THRESHOLD;
- #endif /* CONFIG_MESH */
- #ifdef CONFIG_HT_OVERRIDES
-@@ -4089,6 +4091,7 @@ struct wpa_config * wpa_config_alloc_emp
- config->user_mpm = DEFAULT_USER_MPM;
- config->max_peer_links = DEFAULT_MAX_PEER_LINKS;
- config->mesh_max_inactivity = DEFAULT_MESH_MAX_INACTIVITY;
-+ config->mesh_fwding = DEFAULT_MESH_FWDING;
- config->dot11RSNASAERetransPeriod =
- DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD;
- config->fast_reauth = DEFAULT_FAST_REAUTH;
-@@ -4726,6 +4729,7 @@ static const struct global_parse_data gl
- { INT(user_mpm), 0 },
- { INT_RANGE(max_peer_links, 0, 255), 0 },
- { INT(mesh_max_inactivity), 0 },
-+ { INT_RANGE(mesh_fwding, 0, 1), 0 },
- { INT(dot11RSNASAERetransPeriod), 0 },
- #endif /* CONFIG_MESH */
- { INT(disable_scan_offload), 0 },
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -18,6 +18,7 @@
- #define DEFAULT_USER_MPM 1
- #define DEFAULT_MAX_PEER_LINKS 99
- #define DEFAULT_MESH_MAX_INACTIVITY 300
-+#define DEFAULT_MESH_FWDING 1
- /*
- * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
- * but use 1000 ms in practice to avoid issues on low power CPUs.
-@@ -1327,6 +1328,14 @@ struct wpa_config {
- int mesh_max_inactivity;
-
- /**
-+ * mesh_fwding - Mesh network layer-2 forwarding
-+ *
-+ * This controls whether to enable layer-2 forwarding.
-+ * By default: 1: enabled
-+ */
-+ int mesh_fwding;
-+
-+ /**
- * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
- *
- * This timeout value is used in mesh STA to retransmit
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -829,6 +829,7 @@ static void wpa_config_write_network(FIL
- #endif /* IEEE8021X_EAPOL */
- INT(mode);
- INT(no_auto_peer);
-+ INT(mesh_fwding);
- INT(frequency);
- INT(fixed_freq);
- #ifdef CONFIG_ACS
-@@ -1472,6 +1473,9 @@ static void wpa_config_write_global(FILE
- fprintf(f, "mesh_max_inactivity=%d\n",
- config->mesh_max_inactivity);
-
-+ if (config->mesh_fwding != DEFAULT_MESH_FWDING)
-+ fprintf(f, "mesh_fwding=%d\n", config->mesh_fwding);
-+
- if (config->dot11RSNASAERetransPeriod !=
- DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD)
- fprintf(f, "dot11RSNASAERetransPeriod=%d\n",
---- a/wpa_supplicant/config_ssid.h
-+++ b/wpa_supplicant/config_ssid.h
-@@ -516,6 +516,11 @@ struct wpa_ssid {
- int dot11MeshConfirmTimeout; /* msec */
- int dot11MeshHoldingTimeout; /* msec */
-
-+ /**
-+ * Mesh network layer-2 forwarding
-+ */
-+ int mesh_fwding;
-+
- int ht;
- int ht40;
-
---- a/wpa_supplicant/mesh.c
-+++ b/wpa_supplicant/mesh.c
-@@ -126,6 +126,7 @@ static struct mesh_conf * mesh_config_cr
- conf->mesh_cc_id = 0;
- conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
- conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
-+ conf->mesh_fwding = ssid->mesh_fwding;
- conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
- conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
- conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
-@@ -328,6 +329,7 @@ static int wpa_supplicant_mesh_init(stru
- bss->conf->start_disabled = 1;
- bss->conf->mesh = MESH_ENABLED;
- bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
-+ bss->conf->mesh_fwding = wpa_s->conf->mesh_fwding;
-
- if (ieee80211_is_dfs(ssid->frequency, wpa_s->hw.modes,
- wpa_s->hw.num_modes) && wpa_s->conf->country[0]) {
-@@ -549,6 +551,10 @@ int wpa_supplicant_join_mesh(struct wpa_
- }
- params->conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
-
-+ /* always explicitely set forwarding to on or off for now */
-+ params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_FORWARDING;
-+ params->conf.forwarding = ssid->mesh_fwding;
-+
- os_free(wpa_s->mesh_params);
- wpa_s->mesh_params = params;
- if (wpa_supplicant_mesh_init(wpa_s, ssid, ¶ms->freq)) {
---- a/wpa_supplicant/mesh_mpm.c
-+++ b/wpa_supplicant/mesh_mpm.c
-@@ -305,9 +305,9 @@ static void mesh_mpm_send_plink_action(s
- info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
- /* TODO: Add Connected to Mesh Gate/AS subfields */
- wpabuf_put_u8(buf, info);
-- /* always forwarding & accepting plinks for now */
-+ /* set forwarding & always accepting plinks for now */
- wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
-- MESH_CAP_FORWARDING);
-+ (conf->mesh_fwding ? MESH_CAP_FORWARDING : 0));
- } else { /* Peer closing frame */
- /* IE: Mesh ID */
- wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
---- a/wpa_supplicant/wpa_supplicant.conf
-+++ b/wpa_supplicant/wpa_supplicant.conf
-@@ -153,6 +153,9 @@ ap_scan=1
- # This timeout value is used in mesh STA to clean up inactive stations.
- #mesh_max_inactivity=300
-
-+# Enable 802.11s layer-2 routing and forwarding
-+#mesh_fwding=1
-+
- # cert_in_cb - Whether to include a peer certificate dump in events
- # This controls whether peer certificates for authentication server and
- # its certificate chain are included in EAP peer certificate events. This is
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 12 Feb 2019 14:22:43 +0100
-Subject: [PATCH v2] wpa_supplicant: fix race condition in mesh mpm new peer
- handling
-
-When wpa_supplicant receives another new peer event before the first one
-has been processed, it tries to add a station to the driver a second time
-(which fails) and then tears down the station entry until another event
-comes in.
-Fix this by only adding a station to the driver if it didn't exist already.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/wpa_supplicant/mesh_mpm.c
-+++ b/wpa_supplicant/mesh_mpm.c
-@@ -710,11 +710,12 @@ static struct sta_info * mesh_mpm_add_pe
- }
-
- sta = ap_get_sta(data, addr);
-- if (!sta) {
-- sta = ap_sta_add(data, addr);
-- if (!sta)
-- return NULL;
-- }
-+ if (sta)
-+ return NULL;
-+
-+ sta = ap_sta_add(data, addr);
-+ if (!sta)
-+ return NULL;
-
- /* Set WMM by default since Mesh STAs are QoS STAs */
- sta->flags |= WLAN_STA_WMM;
+++ /dev/null
-From 8c07fa9eda13e835f3f968b2e1c9a8be3a851ff9 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Thu, 29 Aug 2019 11:52:04 +0300
-Subject: [PATCH] AP: Silently ignore management frame from unexpected source
- address
-
-Do not process any received Management frames with unexpected/invalid SA
-so that we do not add any state for unexpected STA addresses or end up
-sending out frames to unexpected destination. This prevents unexpected
-sequences where an unprotected frame might end up causing the AP to send
-out a response to another device and that other device processing the
-unexpected response.
-
-In particular, this prevents some potential denial of service cases
-where the unexpected response frame from the AP might result in a
-connected station dropping its association.
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/ap/drv_callbacks.c | 13 +++++++++++++
- src/ap/ieee802_11.c | 12 ++++++++++++
- 2 files changed, 25 insertions(+)
-
---- a/src/ap/drv_callbacks.c
-+++ b/src/ap/drv_callbacks.c
-@@ -131,6 +131,19 @@ int hostapd_notif_assoc(struct hostapd_d
- "hostapd_notif_assoc: Skip event with no address");
- return -1;
- }
-+
-+ if (is_multicast_ether_addr(addr) ||
-+ is_zero_ether_addr(addr) ||
-+ os_memcmp(addr, hapd->own_addr, ETH_ALEN) == 0) {
-+ /* Do not process any frames with unexpected/invalid SA so that
-+ * we do not add any state for unexpected STA addresses or end
-+ * up sending out frames to unexpected destination. */
-+ wpa_printf(MSG_DEBUG, "%s: Invalid SA=" MACSTR
-+ " in received indication - ignore this indication silently",
-+ __func__, MAC2STR(addr));
-+ return 0;
-+ }
-+
- random_add_randomness(addr, ETH_ALEN);
-
- hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
---- a/src/ap/ieee802_11.c
-+++ b/src/ap/ieee802_11.c
-@@ -4626,6 +4626,18 @@ int ieee802_11_mgmt(struct hostapd_data
- fc = le_to_host16(mgmt->frame_control);
- stype = WLAN_FC_GET_STYPE(fc);
-
-+ if (is_multicast_ether_addr(mgmt->sa) ||
-+ is_zero_ether_addr(mgmt->sa) ||
-+ os_memcmp(mgmt->sa, hapd->own_addr, ETH_ALEN) == 0) {
-+ /* Do not process any frames with unexpected/invalid SA so that
-+ * we do not add any state for unexpected STA addresses or end
-+ * up sending out frames to unexpected destination. */
-+ wpa_printf(MSG_DEBUG, "MGMT: Invalid SA=" MACSTR
-+ " in received frame - ignore this frame silently",
-+ MAC2STR(mgmt->sa));
-+ return 0;
-+ }
-+
- if (stype == WLAN_FC_STYPE_BEACON) {
- handle_beacon(hapd, mgmt, len, fi);
- return 1;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 23 Jan 2020 13:50:47 +0100
-Subject: [PATCH] driver_nl80211: fix WMM queue mapping for regulatory
- limit
-
-nl80211 uses a different queue mapping from hostap, so AC indexes need to
-be converted.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211_capa.c
-+++ b/src/drivers/driver_nl80211_capa.c
-@@ -1403,6 +1403,12 @@ static void phy_info_freq(struct hostapd
- [NL80211_WMMR_AIFSN] = { .type = NLA_U8 },
- [NL80211_WMMR_TXOP] = { .type = NLA_U16 },
- };
-+ static const u8 wmm_map[4] = {
-+ [NL80211_AC_BE] = WMM_AC_BE,
-+ [NL80211_AC_BK] = WMM_AC_BK,
-+ [NL80211_AC_VI] = WMM_AC_VI,
-+ [NL80211_AC_VO] = WMM_AC_VO,
-+ };
- struct nlattr *nl_wmm;
- struct nlattr *tb_wmm[NL80211_WMMR_MAX + 1];
- int rem_wmm, ac, count = 0;
-@@ -1424,12 +1430,13 @@ static void phy_info_freq(struct hostapd
- return;
- }
- ac = nl_wmm->nla_type;
-- if (ac < 0 || ac >= WMM_AC_NUM) {
-+ if (ac >= ARRAY_SIZE(wmm_map)) {
- wpa_printf(MSG_DEBUG,
- "nl80211: Invalid AC value %d", ac);
- return;
- }
-
-+ ac = wmm_map[ac];
- chan->wmm_rules[ac].min_cwmin =
- nla_get_u16(tb_wmm[NL80211_WMMR_CW_MIN]);
- chan->wmm_rules[ac].min_cwmax =
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 23 Jan 2020 14:10:20 +0100
-Subject: [PATCH] driver_nl80211: fix regulatory limits for wmm cwmin/cwmax
- values
-
-The internal WMM AC parameters use just the exponent of the CW value, while
-nl80211 reports the full CW value.
-This led to completely bogus CWmin/CWmax values in the WMM IE when a regulatory
-limit was present. Fix this by converting the value to the exponent before
-passing it on
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/src/drivers/driver_nl80211_capa.c
-+++ b/src/drivers/driver_nl80211_capa.c
-@@ -1336,6 +1336,18 @@ static void phy_info_vht_capa(struct hos
- }
- }
-
-+static inline int cw2ecw(unsigned int cw)
-+{
-+ int bit;
-+
-+ if (cw == 0)
-+ return 0;
-+
-+ for (bit = 1; cw != 1; bit++)
-+ cw >>= 1;
-+
-+ return bit;
-+}
-
- static void phy_info_freq(struct hostapd_hw_modes *mode,
- struct hostapd_channel_data *chan,
-@@ -1438,9 +1450,9 @@ static void phy_info_freq(struct hostapd
-
- ac = wmm_map[ac];
- chan->wmm_rules[ac].min_cwmin =
-- nla_get_u16(tb_wmm[NL80211_WMMR_CW_MIN]);
-+ cw2ecw(nla_get_u16(tb_wmm[NL80211_WMMR_CW_MIN]));
- chan->wmm_rules[ac].min_cwmax =
-- nla_get_u16(tb_wmm[NL80211_WMMR_CW_MAX]);
-+ cw2ecw(nla_get_u16(tb_wmm[NL80211_WMMR_CW_MAX]));
- chan->wmm_rules[ac].min_aifs =
- nla_get_u8(tb_wmm[NL80211_WMMR_AIFSN]);
- chan->wmm_rules[ac].max_txop =
+++ /dev/null
-From 1766e608ba1114220f3b3598e77aa53b50c38a6e Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <jouni@codeaurora.org>
-Date: Mon, 14 Oct 2019 19:27:47 +0300
-Subject: [PATCH] wolfSSL: Fix crypto_bignum_sub()
-
-The initial crypto wrapper implementation for wolfSSL seems to have
-included a copy-paste error in crypto_bignum_sub() implementation that
-was identical to crypto_bignum_add() while mp_sub() should have been
-used instead of mp_add().
-
-Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
----
- src/crypto/crypto_wolfssl.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/src/crypto/crypto_wolfssl.c
-+++ b/src/crypto/crypto_wolfssl.c
-@@ -1151,7 +1151,7 @@ int crypto_bignum_sub(const struct crypt
- if (TEST_FAIL())
- return -1;
-
-- return mp_add((mp_int *) a, (mp_int *) b,
-+ return mp_sub((mp_int *) a, (mp_int *) b,
- (mp_int *) r) == MP_OKAY ? 0 : -1;
- }
-
+++ /dev/null
-From 6a28c4dbc102de3fed9db44637f47a10e7adfb78 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 16 May 2020 21:01:51 +0300
-Subject: [PATCH 1/3] wolfssl: Fix compiler warnings on size_t printf format
- use
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/crypto/tls_wolfssl.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/src/crypto/tls_wolfssl.c
-+++ b/src/crypto/tls_wolfssl.c
-@@ -1741,7 +1741,7 @@ struct wpabuf * tls_connection_encrypt(v
- if (!conn)
- return NULL;
-
-- wpa_printf(MSG_DEBUG, "SSL: encrypt: %ld bytes", wpabuf_len(in_data));
-+ wpa_printf(MSG_DEBUG, "SSL: encrypt: %zu bytes", wpabuf_len(in_data));
-
- wolfssl_reset_out_data(&conn->output);
-
-@@ -1792,7 +1792,7 @@ struct wpabuf * tls_connection_decrypt(v
- }
- wpabuf_put(buf, res);
-
-- wpa_printf(MSG_DEBUG, "SSL: decrypt: %ld bytes", wpabuf_len(buf));
-+ wpa_printf(MSG_DEBUG, "SSL: decrypt: %zu bytes", wpabuf_len(buf));
-
- return buf;
- }
+++ /dev/null
-From eb595b3e3ab531645a5bde71cf6385335b7a4b95 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 16 May 2020 21:02:17 +0300
-Subject: [PATCH 2/3] wolfssl: Fix crypto_bignum_rand() implementation
-
-The previous implementation used mp_rand_prime() to generate a random
-value in range 0..m. That is insanely slow way of generating a random
-value since mp_rand_prime() is for generating a random _prime_ which is
-not what is needed here. Replace that implementation with generationg of
-a random value in the requested range without doing any kind of prime
-number checks or loops to reject values that are not primes.
-
-This speeds up SAE and EAP-pwd routines by couple of orders of
-magnitude..
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- src/crypto/crypto_wolfssl.c | 12 +++++++-----
- 1 file changed, 7 insertions(+), 5 deletions(-)
-
---- a/src/crypto/crypto_wolfssl.c
-+++ b/src/crypto/crypto_wolfssl.c
-@@ -1084,19 +1084,21 @@ int crypto_bignum_rand(struct crypto_big
- {
- int ret = 0;
- WC_RNG rng;
-+ size_t len;
-+ u8 *buf;
-
- if (TEST_FAIL())
- return -1;
- if (wc_InitRng(&rng) != 0)
- return -1;
-- if (mp_rand_prime((mp_int *) r,
-- (mp_count_bits((mp_int *) m) + 7) / 8 * 2,
-- &rng, NULL) != 0)
-- ret = -1;
-- if (ret == 0 &&
-+ len = (mp_count_bits((mp_int *) m) + 7) / 8;
-+ buf = os_malloc(len);
-+ if (!buf || wc_RNG_GenerateBlock(&rng, buf, len) != 0 ||
-+ mp_read_unsigned_bin((mp_int *) r, buf, len) != MP_OKAY ||
- mp_mod((mp_int *) r, (mp_int *) m, (mp_int *) r) != 0)
- ret = -1;
- wc_FreeRng(&rng);
-+ bin_clear_free(buf, len);
- return ret;
- }
-
+++ /dev/null
-From 79488da576aeeb9400e1742fab7f463eed0fa7a1 Mon Sep 17 00:00:00 2001
-From: Jouni Malinen <j@w1.fi>
-Date: Sat, 16 May 2020 21:07:45 +0300
-Subject: [PATCH 3/3] wolfssl: Do not hardcode include directory in
- wpa_supplicant build
-
-This is not really appropriate for any kind of cross compilations and is
-not really needed in general since system specific values can be set in
-.config.
-
-Signed-off-by: Jouni Malinen <j@w1.fi>
----
- wpa_supplicant/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -1086,7 +1086,7 @@ endif
-
- ifeq ($(CONFIG_TLS), wolfssl)
- ifdef TLS_FUNCS
--CFLAGS += -DWOLFSSL_DER_LOAD -I/usr/local/include/wolfssl
-+CFLAGS += -DWOLFSSL_DER_LOAD
- OBJS += ../src/crypto/tls_wolfssl.o
- endif
- OBJS += ../src/crypto/crypto_wolfssl.o
#ifdef ANDROID
#include <sys/capability.h>
-@@ -182,59 +183,46 @@ int os_gmtime(os_time_t t, struct os_tm
+@@ -188,59 +189,46 @@ int os_gmtime(os_time_t t, struct os_tm
return 0;
}
ifndef CONFIG_NO_GITVER
# Add VERSION_STR postfix for builds from a git repository
-@@ -198,7 +199,8 @@ endif
+@@ -200,7 +201,8 @@ endif
ifdef CONFIG_NO_VLAN
CFLAGS += -DCONFIG_NO_VLAN
OBJS += ../src/ap/vlan_init.o
OBJS += ../src/ap/vlan_ifconfig.o
OBJS += ../src/ap/vlan.o
-@@ -366,10 +368,14 @@ CFLAGS += -DCONFIG_MBO
+@@ -346,10 +348,14 @@ CFLAGS += -DCONFIG_MBO
OBJS += ../src/ap/mbo_ap.o
endif
LIBS += $(DRV_AP_LIBS)
ifdef CONFIG_L2_PACKET
-@@ -1316,6 +1322,12 @@ install: $(addprefix $(DESTDIR)$(BINDIR)
+@@ -1294,6 +1300,12 @@ install: $(addprefix $(DESTDIR)$(BINDIR)
BCHECK=../src/drivers/build.hostapd
hostapd: $(BCHECK) $(OBJS)
$(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
@$(E) " LD " $@
-@@ -1358,6 +1370,12 @@ ifeq ($(CONFIG_TLS), linux)
+@@ -1335,6 +1347,12 @@ ifeq ($(CONFIG_TLS), linux)
HOBJS += ../src/crypto/crypto_linux.o
endif
ifndef CONFIG_NO_GITVER
# Add VERSION_STR postfix for builds from a git repository
-@@ -363,7 +364,9 @@ endif
+@@ -359,7 +360,9 @@ endif
ifdef CONFIG_IBSS_RSN
NEED_RSN_AUTHENTICATOR=y
CFLAGS += -DCONFIG_IBSS_RSN
OBJS += ibss_rsn.o
endif
-@@ -892,6 +895,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+@@ -880,6 +883,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
LIBS += -ldl -rdynamic
endif
endif
ifdef CONFIG_AP
-@@ -899,9 +906,11 @@ NEED_EAP_COMMON=y
+@@ -887,9 +894,11 @@ NEED_EAP_COMMON=y
NEED_RSN_AUTHENTICATOR=y
CFLAGS += -DCONFIG_AP
OBJS += ap.o
OBJS += ../src/ap/hostapd.o
OBJS += ../src/ap/wpa_auth_glue.o
OBJS += ../src/ap/utils.o
-@@ -983,6 +992,12 @@ endif
+@@ -969,6 +978,12 @@ endif
ifdef CONFIG_HS20
OBJS += ../src/ap/hs20.o
endif
endif
ifdef CONFIG_MBO
-@@ -991,7 +1006,9 @@ CFLAGS += -DCONFIG_MBO
+@@ -977,7 +992,9 @@ CFLAGS += -DCONFIG_MBO
endif
ifdef NEED_RSN_AUTHENTICATOR
NEED_AES_WRAP=y
OBJS += ../src/ap/wpa_auth.o
OBJS += ../src/ap/wpa_auth_ie.o
-@@ -1899,6 +1916,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
+@@ -1887,6 +1904,12 @@ wpa_priv: $(BCHECK) $(OBJS_priv)
$(OBJS_c) $(OBJS_t) $(OBJS_t2) $(OBJS) $(BCHECK) $(EXTRA_progs): .config
wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
$(Q)$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
@$(E) " LD " $@
-@@ -1999,6 +2022,12 @@ endif
+@@ -1987,6 +2010,12 @@ endif
$(Q)sed -e 's|\@BINDIR\@|$(BINDIR)|g' $< >$@
@$(E) " sed" $<
wpa_cli.exe: wpa_cli
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
-@@ -5657,8 +5657,8 @@ union wpa_event_data {
+@@ -5865,8 +5865,8 @@ union wpa_event_data {
* Driver wrapper code should call this function whenever an event is received
* from the driver.
*/
/**
* wpa_supplicant_event_global - Report a driver event for wpa_supplicant
-@@ -5670,7 +5670,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -5878,7 +5878,7 @@ void wpa_supplicant_event(void *ctx, enu
* Same as wpa_supplicant_event(), but we search for the interface in
* wpa_global.
*/
/*
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
-@@ -1669,8 +1669,8 @@ err:
+@@ -1768,8 +1768,8 @@ err:
#endif /* CONFIG_OWE */
{
struct hostapd_data *hapd = ctx;
#ifndef CONFIG_NO_STDOUT_DEBUG
-@@ -1915,7 +1915,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -2014,7 +2014,7 @@ void wpa_supplicant_event(void *ctx, enu
}
struct hapd_interfaces *interfaces = ctx;
--- a/wpa_supplicant/wpa_priv.c
+++ b/wpa_supplicant/wpa_priv.c
-@@ -1031,8 +1031,8 @@ static void wpa_priv_send_ft_response(st
+@@ -1038,8 +1038,8 @@ static void wpa_priv_send_ft_response(st
}
{
struct wpa_priv_interface *iface = ctx;
-@@ -1095,7 +1095,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -1102,7 +1102,7 @@ void wpa_supplicant_event(void *ctx, enu
}
union wpa_event_data *data)
{
struct wpa_priv_global *global = ctx;
-@@ -1207,6 +1207,8 @@ int main(int argc, char *argv[])
+@@ -1215,6 +1215,8 @@ int main(int argc, char *argv[])
if (os_program_init())
return -1;
os_memset(&global, 0, sizeof(global));
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
-@@ -4184,8 +4184,8 @@ static void wpas_event_assoc_reject(stru
+@@ -4499,8 +4499,8 @@ static void wpas_event_unprot_beacon(str
}
{
struct wpa_supplicant *wpa_s = ctx;
int resched;
-@@ -4967,7 +4967,7 @@ void wpa_supplicant_event(void *ctx, enu
+@@ -5313,7 +5313,7 @@ void wpa_supplicant_event(void *ctx, enu
}
struct wpa_supplicant *wpa_s;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -6096,7 +6096,6 @@ struct wpa_interface * wpa_supplicant_ma
+@@ -6571,7 +6571,6 @@ struct wpa_interface * wpa_supplicant_ma
return NULL;
}
/**
* wpa_supplicant_match_existing - Match existing interfaces
* @global: Pointer to global data from wpa_supplicant_init()
-@@ -6133,6 +6132,11 @@ static int wpa_supplicant_match_existing
+@@ -6608,6 +6607,11 @@ static int wpa_supplicant_match_existing
#endif /* CONFIG_MATCH_IFACE */
/**
* wpa_supplicant_add_iface - Add a new network interface
-@@ -6389,6 +6393,8 @@ struct wpa_global * wpa_supplicant_init(
+@@ -6864,6 +6868,8 @@ struct wpa_global * wpa_supplicant_init(
#ifndef CONFIG_NO_WPA_MSG
wpa_msg_register_ifname_cb(wpa_supplicant_msg_ifname_cb);
#endif /* CONFIG_NO_WPA_MSG */
wpa_debug_open_file(params->wpa_debug_file_path);
--- a/hostapd/main.c
+++ b/hostapd/main.c
-@@ -592,6 +592,11 @@ fail:
+@@ -590,6 +590,11 @@ fail:
return -1;
}
#ifdef CONFIG_WPS
static int gen_uuid(const char *txt_addr)
-@@ -682,6 +687,8 @@ int main(int argc, char *argv[])
+@@ -680,6 +685,8 @@ int main(int argc, char *argv[])
return -1;
#endif /* CONFIG_DPP */
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
-@@ -3411,6 +3411,10 @@ static int hostapd_config_fill(struct ho
+@@ -3452,6 +3452,10 @@ static int hostapd_config_fill(struct ho
+ if (bss->ocv && !bss->ieee80211w)
bss->ieee80211w = 1;
#endif /* CONFIG_OCV */
- #ifdef CONFIG_IEEE80211N
+ } else if (os_strcmp(buf, "noscan") == 0) {
+ conf->noscan = atoi(pos);
+ } else if (os_strcmp(buf, "ht_coex") == 0) {
} else if (os_strcmp(buf, "ht_capab") == 0) {
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
-@@ -934,6 +934,8 @@ struct hostapd_config {
+@@ -972,6 +972,8 @@ struct hostapd_config {
int ht_op_mode_fixed;
u16 ht_capab;
int no_pri_sec_switch;
--- a/src/ap/hw_features.c
+++ b/src/ap/hw_features.c
-@@ -477,7 +477,8 @@ static int ieee80211n_check_40mhz(struct
+@@ -500,7 +500,8 @@ static int ieee80211n_check_40mhz(struct
int ret;
/* Check that HT40 is used and PRI / SEC switch is allowed */
hostapd_set_state(iface, HAPD_IFACE_HT_SCAN);
--- a/src/ap/ieee802_11_ht.c
+++ b/src/ap/ieee802_11_ht.c
-@@ -252,6 +252,9 @@ void hostapd_2040_coex_action(struct hos
+@@ -230,6 +230,9 @@ void hostapd_2040_coex_action(struct hos
return;
}
if (len < IEEE80211_HDRLEN + 2 + sizeof(*bc_ie)) {
wpa_printf(MSG_DEBUG,
"Ignore too short 20/40 BSS Coexistence Management frame");
-@@ -412,6 +415,9 @@ void ht40_intolerant_add(struct hostapd_
+@@ -390,6 +393,9 @@ void ht40_intolerant_add(struct hostapd_
if (iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return;
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
-@@ -2312,6 +2312,7 @@ static const struct parse_data ssid_fiel
+@@ -2477,6 +2477,7 @@ static const struct parse_data ssid_fiel
#else /* CONFIG_MESH */
{ INT_RANGE(mode, 0, 4) },
#endif /* CONFIG_MESH */
{ STR(id_str) },
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
-@@ -829,6 +829,7 @@ static void wpa_config_write_network(FIL
+@@ -866,6 +866,7 @@ static void wpa_config_write_network(FIL
#endif /* IEEE8021X_EAPOL */
INT(mode);
INT(no_auto_peer);
+ INT(noscan);
- INT(mesh_fwding);
INT(frequency);
- INT(fixed_freq);
+ INT(enable_edmg);
+ INT(edmg_channel);
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -361,6 +361,8 @@ static int wpa_supplicant_mesh_init(stru
+@@ -333,6 +333,8 @@ static int wpa_supplicant_mesh_init(stru
frequency);
goto out_free;
}
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2143,12 +2143,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2331,12 +2331,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
enum hostapd_hw_mode hw_mode;
struct hostapd_hw_modes *mode = NULL;
unsigned int j, k;
struct hostapd_freq_params vht_freq;
int chwidth, seg0, seg1;
-@@ -2221,7 +2221,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
- return;
+@@ -2416,7 +2416,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
+ #endif /* CONFIG_HE_OVERRIDES */
/* Setup higher BW only for 5 GHz */
- if (mode->mode != HOSTAPD_MODE_IEEE80211A)
for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
-@@ -918,6 +918,8 @@ struct wpa_ssid {
+@@ -960,6 +960,8 @@ struct wpa_ssid {
*/
int no_auto_peer;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -4474,7 +4474,7 @@ wpa_supplicant_alloc(struct wpa_supplica
+@@ -4926,7 +4926,7 @@ wpa_supplicant_alloc(struct wpa_supplica
if (wpa_s == NULL)
return NULL;
wpa_s->scan_req = INITIAL_SCAN_REQ;
endif
ifdef NEED_NETLINK
-@@ -146,6 +143,7 @@ endif
+@@ -142,6 +139,7 @@ endif
ifdef NEED_RFKILL
DRV_OBJS += ../src/drivers/rfkill.o
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -4431,7 +4431,7 @@ static int nl80211_set_channel(struct i8
+@@ -4639,7 +4639,7 @@ static int nl80211_set_channel(struct i8
freq->freq, freq->ht_enabled, freq->vht_enabled, freq->he_enabled,
freq->bandwidth, freq->center_freq1, freq->center_freq2);
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
-@@ -108,6 +108,26 @@ static void hostapd_reload_bss(struct ho
+@@ -112,6 +112,28 @@ static void hostapd_reload_bss(struct ho
#endif /* CONFIG_NO_RADIUS */
ssid = &hapd->conf->ssid;
+
+ hostapd_set_freq(hapd, hapd->iconf->hw_mode, hapd->iface->freq,
+ hapd->iconf->channel,
++ hapd->iconf->enable_edmg,
++ hapd->iconf->edmg_channel,
+ hapd->iconf->ieee80211n,
+ hapd->iconf->ieee80211ac,
+ hapd->iconf->ieee80211ax,
if (!ssid->wpa_psk_set && ssid->wpa_psk && !ssid->wpa_psk->next &&
ssid->wpa_passphrase_set && ssid->wpa_passphrase) {
/*
-@@ -205,6 +225,7 @@ int hostapd_reload_config(struct hostapd
+@@ -213,6 +235,7 @@ int hostapd_reload_config(struct hostapd
struct hostapd_data *hapd = iface->bss[0];
struct hostapd_config *newconf, *oldconf;
size_t j;
if (iface->config_fname == NULL) {
/* Only in-memory config in use - assume it has been updated */
-@@ -255,24 +276,20 @@ int hostapd_reload_config(struct hostapd
+@@ -263,24 +286,20 @@ int hostapd_reload_config(struct hostapd
}
iface->conf = newconf;
--- a/wpa_supplicant/ap.c
+++ b/wpa_supplicant/ap.c
-@@ -1378,15 +1378,35 @@ int ap_switch_channel(struct wpa_supplic
+@@ -1426,15 +1426,35 @@ int ap_switch_channel(struct wpa_supplic
#ifdef CONFIG_CTRL_IFACE
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -2721,10 +2721,15 @@ static int wpa_driver_nl80211_del_beacon
+@@ -2778,10 +2778,15 @@ static int wpa_driver_nl80211_del_beacon
struct nl_msg *msg;
struct wpa_driver_nl80211_data *drv = bss->drv;
return send_and_recv_msgs(drv, msg, NULL, NULL);
}
-@@ -5042,7 +5047,7 @@ static void nl80211_teardown_ap(struct i
+@@ -5250,7 +5255,7 @@ static void nl80211_teardown_ap(struct i
nl80211_mgmt_unsubscribe(bss, "AP teardown");
nl80211_put_wiphy_data_ap(bss);
}
-@@ -7353,8 +7358,6 @@ static int wpa_driver_nl80211_if_remove(
+@@ -7631,8 +7636,6 @@ static int wpa_driver_nl80211_if_remove(
} else {
wpa_printf(MSG_DEBUG, "nl80211: First BSS - reassign context");
nl80211_teardown_ap(bss);
nl80211_destroy_bss(bss);
if (!bss->added_if)
i802_set_iface_flags(bss, 0);
-@@ -7744,7 +7747,6 @@ static int wpa_driver_nl80211_deinit_ap(
+@@ -8006,7 +8009,6 @@ static int wpa_driver_nl80211_deinit_ap(
if (!is_ap_interface(drv->nlmode))
return -1;
wpa_driver_nl80211_del_beacon(bss);
/*
* If the P2P GO interface was dynamically added, then it is
-@@ -7764,7 +7766,6 @@ static int wpa_driver_nl80211_stop_ap(vo
+@@ -8026,7 +8028,6 @@ static int wpa_driver_nl80211_stop_ap(vo
if (!is_ap_interface(drv->nlmode))
return -1;
wpa_driver_nl80211_del_beacon(bss);
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
-@@ -60,6 +60,7 @@
+@@ -65,6 +65,7 @@
#include "fst/fst_ctrl_iface.h"
#include "config_file.h"
#include "ctrl_iface.h"
#define HOSTAPD_CLI_DUP_VALUE_MAX_LEN 256
-@@ -78,6 +79,7 @@ static void hostapd_ctrl_iface_send(stru
+@@ -80,6 +81,7 @@ static void hostapd_ctrl_iface_send(stru
enum wpa_msg_type type,
const char *buf, size_t len);
static int hostapd_ctrl_iface_attach(struct hostapd_data *hapd,
struct sockaddr_storage *from,
-@@ -129,6 +131,61 @@ static int hostapd_ctrl_iface_new_sta(st
+@@ -131,6 +133,61 @@ static int hostapd_ctrl_iface_new_sta(st
return 0;
}
+ iface->interfaces->config_read_cb = config_read_cb;
+}
- #ifdef CONFIG_IEEE80211W
#ifdef NEED_AP_MLME
-@@ -3195,6 +3252,8 @@ static int hostapd_ctrl_iface_receive_pr
+ static int hostapd_ctrl_iface_sa_query(struct hostapd_data *hapd,
+@@ -3499,6 +3556,8 @@ static int hostapd_ctrl_iface_receive_pr
} else if (os_strncmp(buf, "VENDOR ", 7) == 0) {
reply_len = hostapd_ctrl_iface_vendor(hapd, buf + 7, reply,
reply_size);
#ifdef RADIUS_SERVER
--- a/src/ap/ctrl_iface_ap.c
+++ b/src/ap/ctrl_iface_ap.c
-@@ -874,7 +874,13 @@ int hostapd_parse_csa_settings(const cha
+@@ -917,7 +917,13 @@ int hostapd_parse_csa_settings(const cha
int hostapd_ctrl_iface_stop_ap(struct hostapd_data *hapd)
{
-include .config
-include $(if $(MULTICALL),../hostapd/.config)
-@@ -116,6 +120,8 @@ OBJS_c += ../src/utils/common.o
+@@ -118,6 +122,8 @@ OBJS_c += ../src/utils/common.o
OBJS_c += ../src/common/cli.o
OBJS += wmm_ac.o
--- a/wpa_supplicant/bss.h
+++ b/wpa_supplicant/bss.h
-@@ -82,6 +82,10 @@ struct wpa_bss {
+@@ -83,6 +83,10 @@ struct wpa_bss {
u8 ssid[SSID_MAX_LEN];
/** Length of SSID */
size_t ssid_len;
break;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -127,6 +127,55 @@ static void wpas_update_fils_connect_par
- #endif /* CONFIG_FILS && IEEE8021X_EAPOL */
-
+@@ -129,6 +129,54 @@ static void wpas_update_fils_connect_par
+ static void wpas_update_owe_connect_params(struct wpa_supplicant *wpa_s);
+ #endif /* CONFIG_OWE */
+static int hostapd_stop(struct wpa_supplicant *wpa_s)
+{
+ }
+ return 0;
+}
-+
+
+ #ifdef CONFIG_WEP
/* Configure default/group WEP keys for static WEP */
- int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
- {
-@@ -940,12 +989,16 @@ void wpa_supplicant_set_state(struct wpa
+@@ -991,6 +1039,8 @@ void wpa_supplicant_set_state(struct wpa
sme_sched_obss_scan(wpa_s, 1);
+ hostapd_reload(wpa_s, wpa_s->current_bss);
#if defined(CONFIG_FILS) && defined(IEEE8021X_EAPOL)
if (!fils_hlp_sent && ssid && ssid->eap.erp)
- wpas_update_fils_connect_params(wpa_s);
- #endif /* CONFIG_FILS && IEEE8021X_EAPOL */
+ update_fils_connect_params = true;
+@@ -1001,6 +1051,8 @@ void wpa_supplicant_set_state(struct wpa
+ #endif /* CONFIG_OWE */
} else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING ||
state == WPA_ASSOCIATED) {
+ if (wpa_s->hostapd)
wpa_s->new_connection = 1;
wpa_drv_set_operstate(wpa_s, 0);
#ifndef IEEE8021X_EAPOL
-@@ -2038,6 +2091,8 @@ void wpa_supplicant_associate(struct wpa
+@@ -2222,6 +2274,8 @@ void wpa_supplicant_associate(struct wpa
wpa_ssid_txt(ssid->ssid, ssid->ssid_len),
ssid->id);
wpas_notify_mesh_group_started(wpa_s, ssid);
#else /* CONFIG_MESH */
wpa_msg(wpa_s, MSG_ERROR,
"mesh mode support not included in the build");
-@@ -5716,6 +5771,16 @@ static int wpa_supplicant_init_iface(str
+@@ -6184,6 +6238,16 @@ static int wpa_supplicant_init_iface(str
sizeof(wpa_s->bridge_ifname));
}
+ }
+
/* RSNA Supplicant Key Management - INITIALIZE */
- eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
- eapol_sm_notify_portValid(wpa_s->eapol, FALSE);
-@@ -6043,6 +6108,11 @@ static void wpa_supplicant_deinit_iface(
+ eapol_sm_notify_portEnabled(wpa_s->eapol, false);
+ eapol_sm_notify_portValid(wpa_s->eapol, false);
+@@ -6517,6 +6581,11 @@ static void wpa_supplicant_deinit_iface(
if (terminate)
wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_TERMINATING);
wpa_s->ctrl_iface = NULL;
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -101,6 +101,11 @@ struct wpa_interface {
+@@ -104,6 +104,11 @@ struct wpa_interface {
const char *ifname;
/**
* bridge_ifname - Optional bridge interface name
*
* If the driver interface (ifname) is included in a Linux bridge
-@@ -516,6 +521,8 @@ struct wpa_supplicant {
+@@ -530,6 +535,8 @@ struct wpa_supplicant {
#endif /* CONFIG_CTRL_IFACE_BINDER */
char bridge_ifname[16];
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
-@@ -2408,6 +2408,11 @@ static int hostapd_ctrl_iface_chan_switc
- if (ret)
- return ret;
+@@ -2665,6 +2665,11 @@ static int hostapd_ctrl_iface_chan_switc
+ return 0;
+ }
+ if (os_strstr(pos, " auto-ht")) {
+ settings.freq_params.ht_enabled = iface->conf->ieee80211n;
/* Save CHAN_SWITCH VHT config */
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
-@@ -1403,11 +1403,6 @@ int ieee802_11_set_beacon(struct hostapd
+@@ -1460,11 +1460,6 @@ int ieee802_11_set_beacon(struct hostapd
struct wpabuf *beacon, *proberesp, *assocresp;
int res, ret = -1;
if (ieee802_11_build_ap_params(hapd, ¶ms) < 0)
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
-@@ -4184,6 +4184,60 @@ static void wpas_event_assoc_reject(stru
+@@ -4499,6 +4499,60 @@ static void wpas_event_unprot_beacon(str
}
void supplicant_event(void *ctx, enum wpa_event_type event,
union wpa_event_data *data)
{
-@@ -4485,8 +4539,10 @@ void supplicant_event(void *ctx, enum wp
+@@ -4801,8 +4855,10 @@ void supplicant_event(void *ctx, enum wp
channel_width_to_string(data->ch_switch.ch_width),
data->ch_switch.cf1,
data->ch_switch.cf2);
wpa_s->current_ssid->frequency = data->ch_switch.freq;
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
-@@ -5478,6 +5478,7 @@ union wpa_event_data {
+@@ -5669,6 +5669,7 @@ union wpa_event_data {
/**
* struct ch_switch
* @freq: Frequency of new channel in MHz
* @ht_enabled: Whether this is an HT channel
* @ch_offset: Secondary channel offset
-@@ -5486,6 +5487,7 @@ union wpa_event_data {
+@@ -5677,6 +5678,7 @@ union wpa_event_data {
* @cf2: Center frequency 2
*/
struct ch_switch {
int ch_offset;
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
-@@ -536,7 +536,7 @@ static void mlme_event_ch_switch(struct
+@@ -541,7 +541,7 @@ static void mlme_event_ch_switch(struct
struct nlattr *ifindex, struct nlattr *freq,
struct nlattr *type, struct nlattr *bw,
struct nlattr *cf1, struct nlattr *cf2,
{
struct i802_bss *bss;
union wpa_event_data data;
-@@ -595,6 +595,8 @@ static void mlme_event_ch_switch(struct
+@@ -600,6 +600,8 @@ static void mlme_event_ch_switch(struct
data.ch_switch.cf1 = nla_get_u32(cf1);
if (cf2)
data.ch_switch.cf2 = nla_get_u32(cf2);
if (finished)
bss->freq = data.ch_switch.freq;
-@@ -2544,6 +2546,7 @@ static void do_process_drv_event(struct
+@@ -2689,6 +2691,7 @@ static void do_process_drv_event(struct
tb[NL80211_ATTR_CHANNEL_WIDTH],
tb[NL80211_ATTR_CENTER_FREQ1],
tb[NL80211_ATTR_CENTER_FREQ2],
0);
break;
case NL80211_CMD_CH_SWITCH_NOTIFY:
-@@ -2554,6 +2557,7 @@ static void do_process_drv_event(struct
+@@ -2699,6 +2702,7 @@ static void do_process_drv_event(struct
tb[NL80211_ATTR_CHANNEL_WIDTH],
tb[NL80211_ATTR_CENTER_FREQ1],
tb[NL80211_ATTR_CENTER_FREQ2],
--- a/hostapd/Makefile
+++ b/hostapd/Makefile
-@@ -220,6 +220,9 @@ endif
+@@ -222,6 +222,9 @@ endif
ifdef CONFIG_NO_CTRL_IFACE
CFLAGS += -DCONFIG_NO_CTRL_IFACE
else
else
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
-@@ -3020,6 +3020,7 @@ static int hostapd_ctrl_iface_receive_pr
+@@ -3323,6 +3323,7 @@ static int hostapd_ctrl_iface_receive_pr
reply_size);
} else if (os_strcmp(buf, "STATUS-DRIVER") == 0) {
reply_len = hostapd_drv_status(hapd, reply, reply_size);
} else if (os_strcmp(buf, "MIB") == 0) {
reply_len = ieee802_11_get_mib(hapd, reply, reply_size);
if (reply_len >= 0) {
-@@ -3061,6 +3062,7 @@ static int hostapd_ctrl_iface_receive_pr
+@@ -3364,6 +3365,7 @@ static int hostapd_ctrl_iface_receive_pr
} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
reply_len = hostapd_ctrl_iface_sta_next(hapd, buf + 9, reply,
reply_size);
reply_len = -1;
--- a/wpa_supplicant/Makefile
+++ b/wpa_supplicant/Makefile
-@@ -957,6 +957,9 @@ ifdef CONFIG_FILS
+@@ -942,6 +942,9 @@ ifdef CONFIG_FILS
OBJS += ../src/ap/fils_hlp.o
endif
ifdef CONFIG_CTRL_IFACE
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
-@@ -2144,7 +2144,7 @@ static int wpa_supplicant_ctrl_iface_sta
+@@ -2257,7 +2257,7 @@ static int wpa_supplicant_ctrl_iface_sta
pos += ret;
}
if (wpa_s->ap_iface) {
pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos,
end - pos,
-@@ -9962,6 +9962,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10172,6 +10172,7 @@ char * wpa_supplicant_ctrl_iface_process
reply_len = -1;
} else if (os_strncmp(buf, "NOTE ", 5) == 0) {
wpa_printf(MSG_INFO, "NOTE: %s", buf + 5);
} else if (os_strcmp(buf, "MIB") == 0) {
reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
if (reply_len >= 0) {
-@@ -9974,6 +9975,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10184,6 +10185,7 @@ char * wpa_supplicant_ctrl_iface_process
reply_size - reply_len);
#endif /* CONFIG_MACSEC */
}
} else if (os_strncmp(buf, "STATUS", 6) == 0) {
reply_len = wpa_supplicant_ctrl_iface_status(
wpa_s, buf + 6, reply, reply_size);
-@@ -10458,6 +10460,7 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10668,6 +10670,7 @@ char * wpa_supplicant_ctrl_iface_process
reply_len = wpa_supplicant_ctrl_iface_bss(
wpa_s, buf + 4, reply, reply_size);
#ifdef CONFIG_AP
} else if (os_strcmp(buf, "STA-FIRST") == 0) {
reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
} else if (os_strncmp(buf, "STA ", 4) == 0) {
-@@ -10466,12 +10469,15 @@ char * wpa_supplicant_ctrl_iface_process
+@@ -10676,12 +10679,15 @@ char * wpa_supplicant_ctrl_iface_process
} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
reply_size);
static size_t hostapd_write_ht_mcs_bitmask(char *buf, size_t buflen,
size_t curr_len, const u8 *mcs_set)
-@@ -423,6 +424,7 @@ int hostapd_ctrl_iface_sta_next(struct h
+@@ -451,6 +452,7 @@ int hostapd_ctrl_iface_sta_next(struct h
return hostapd_ctrl_iface_sta_mib(hapd, sta->next, buf, buflen);
}
#ifdef CONFIG_P2P_MANAGER
static int p2p_manager_disconnect(struct hostapd_data *hapd, u16 stype,
-@@ -763,12 +765,12 @@ int hostapd_ctrl_iface_status(struct hos
+@@ -806,12 +808,12 @@ int hostapd_ctrl_iface_status(struct hos
return len;
len += ret;
}
if (os_snprintf_error(buflen - len, ret))
--- a/src/ap/ieee802_1x.c
+++ b/src/ap/ieee802_1x.c
-@@ -2706,6 +2706,7 @@ static const char * bool_txt(Boolean val
+@@ -2711,6 +2711,7 @@ static const char * bool_txt(bool val)
return val ? "TRUE" : "FALSE";
}
int ieee802_1x_get_mib(struct hostapd_data *hapd, char *buf, size_t buflen)
{
-@@ -2892,6 +2893,7 @@ int ieee802_1x_get_mib_sta(struct hostap
+@@ -2897,6 +2898,7 @@ int ieee802_1x_get_mib_sta(struct hostap
return len;
}
static void ieee802_1x_wnm_notif_send(void *eloop_ctx, void *timeout_ctx)
--- a/src/ap/wpa_auth.c
+++ b/src/ap/wpa_auth.c
-@@ -4116,6 +4116,7 @@ static const char * wpa_bool_txt(int val
+@@ -4351,6 +4351,7 @@ static const char * wpa_bool_txt(int val
return val ? "TRUE" : "FALSE";
}
#define RSN_SUITE "%02x-%02x-%02x-%d"
#define RSN_SUITE_ARG(s) \
-@@ -4264,7 +4265,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
+@@ -4501,7 +4502,7 @@ int wpa_get_mib_sta(struct wpa_state_mac
return len;
}
{
--- a/src/rsn_supp/wpa.c
+++ b/src/rsn_supp/wpa.c
-@@ -2502,6 +2502,8 @@ static u32 wpa_key_mgmt_suite(struct wpa
+@@ -2680,6 +2680,8 @@ static u32 wpa_key_mgmt_suite(struct wpa
}
#define RSN_SUITE "%02x-%02x-%02x-%d"
#define RSN_SUITE_ARG(s) \
((s) >> 24) & 0xff, ((s) >> 16) & 0xff, ((s) >> 8) & 0xff, (s) & 0xff
-@@ -2585,6 +2587,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch
+@@ -2761,6 +2763,7 @@ int wpa_sm_get_mib(struct wpa_sm *sm, ch
return (int) len;
}
--- a/wpa_supplicant/ap.c
+++ b/wpa_supplicant/ap.c
-@@ -1236,7 +1236,7 @@ int wpas_ap_wps_nfc_report_handover(stru
+@@ -1284,7 +1284,7 @@ int wpas_ap_wps_nfc_report_handover(stru
#endif /* CONFIG_WPS */
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
-@@ -743,7 +743,7 @@ static int wpa_ctrl_command_sta(struct w
+@@ -744,7 +744,7 @@ static int wpa_ctrl_command_sta(struct w
}
buf[len] = '\0';
--- a/src/common/wpa_common.c
+++ b/src/common/wpa_common.c
-@@ -2089,6 +2089,31 @@ u32 wpa_akm_to_suite(int akm)
+@@ -2119,6 +2119,31 @@ u32 wpa_akm_to_suite(int akm)
}
int wpa_compare_rsn_ie(int ft_initial_assoc,
const u8 *ie1, size_t ie1len,
const u8 *ie2, size_t ie2len)
-@@ -2096,8 +2121,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
+@@ -2126,8 +2151,19 @@ int wpa_compare_rsn_ie(int ft_initial_as
if (ie1 == NULL || ie2 == NULL)
return -1;
--- a/src/ap/wps_hostapd.c
+++ b/src/ap/wps_hostapd.c
-@@ -346,8 +346,7 @@ static int hapd_wps_reconfig_in_memory(s
+@@ -394,9 +394,8 @@ static int hapd_wps_reconfig_in_memory(s
bss->wpa_pairwise |= WPA_CIPHER_GCMP;
else
bss->wpa_pairwise |= WPA_CIPHER_CCMP;
- }
+ #ifndef CONFIG_NO_TKIP
- if (cred->encr_type & WPS_ENCR_TKIP)
+ } else if (cred->encr_type & WPS_ENCR_TKIP)
bss->wpa_pairwise |= WPA_CIPHER_TKIP;
+ #endif /* CONFIG_NO_TKIP */
bss->rsn_pairwise = bss->wpa_pairwise;
- bss->wpa_group = wpa_select_ap_group_cipher(bss->wpa,
-@@ -1108,8 +1107,7 @@ int hostapd_init_wps(struct hostapd_data
+@@ -1178,8 +1177,7 @@ int hostapd_init_wps(struct hostapd_data
WPA_CIPHER_GCMP_256)) {
wps->encr_types |= WPS_ENCR_AES;
wps->encr_types_rsn |= WPS_ENCR_AES;
- }
- if (conf->rsn_pairwise & WPA_CIPHER_TKIP) {
+ } else if (conf->rsn_pairwise & WPA_CIPHER_TKIP) {
- wps->encr_types |= WPS_ENCR_TKIP;
- wps->encr_types_rsn |= WPS_ENCR_TKIP;
- }
+ #ifdef CONFIG_NO_TKIP
+ wpa_printf(MSG_INFO, "WPS: TKIP not supported");
+ goto fail;
{
va_list ap;
-@@ -253,8 +253,8 @@ void wpa_printf(int level, const char *f
+@@ -255,7 +255,7 @@ void wpa_printf(int level, const char *f
}
-static void _wpa_hexdump(int level, const char *title, const u8 *buf,
-- size_t len, int show)
+void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+ size_t len, int show)
+ size_t len, int show, int only_syslog)
{
size_t i;
-
-@@ -380,20 +380,8 @@ static void _wpa_hexdump(int level, cons
+@@ -382,19 +382,7 @@ static void _wpa_hexdump(int level, cons
#endif /* CONFIG_ANDROID_LOG */
}
-void wpa_hexdump(int level, const char *title, const void *buf, size_t len)
-{
-- _wpa_hexdump(level, title, buf, len, 1);
+- _wpa_hexdump(level, title, buf, len, 1, 0);
-}
-
-
-void wpa_hexdump_key(int level, const char *title, const void *buf, size_t len)
-{
-- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys);
+- _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys, 0);
-}
-
-
-static void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
-- size_t len, int show)
+void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
-+ size_t len, int show)
+ size_t len, int show)
{
size_t i, llen;
- const u8 *pos = buf;
-@@ -506,20 +494,6 @@ static void _wpa_hexdump_ascii(int level
+@@ -507,20 +495,6 @@ file_done:
}
#ifdef CONFIG_DEBUG_FILE
static char *last_path = NULL;
#endif /* CONFIG_DEBUG_FILE */
-@@ -635,7 +609,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_
+@@ -636,7 +610,7 @@ void wpa_msg_register_ifname_cb(wpa_msg_
}
{
va_list ap;
char *buf;
-@@ -673,7 +647,7 @@ void wpa_msg(void *ctx, int level, const
+@@ -674,7 +648,7 @@ void wpa_msg(void *ctx, int level, const
}
char *buf;
--- a/src/utils/wpa_debug.h
+++ b/src/utils/wpa_debug.h
-@@ -52,6 +52,17 @@ int wpa_debug_reopen_file(void);
+@@ -50,6 +50,17 @@ int wpa_debug_reopen_file(void);
void wpa_debug_close_file(void);
void wpa_debug_setup_stdout(void);
+/* internal */
+void _wpa_hexdump(int level, const char *title, const u8 *buf,
-+ size_t len, int show);
++ size_t len, int show, int only_syslog);
+void _wpa_hexdump_ascii(int level, const char *title, const void *buf,
+ size_t len, int show);
+extern int wpa_debug_show_keys;
/**
* wpa_debug_printf_timestamp - Print timestamp for debug output
*
-@@ -72,9 +83,15 @@ void wpa_debug_print_timestamp(void);
+@@ -70,9 +81,15 @@ void wpa_debug_print_timestamp(void);
*
* Note: New line '\n' is added to the end of the text when printing to stdout.
*/
/**
* wpa_hexdump - conditional hex dump
* @level: priority level (MSG_*) of the message
-@@ -86,7 +103,13 @@ PRINTF_FORMAT(2, 3);
+@@ -84,7 +101,13 @@ PRINTF_FORMAT(2, 3);
* output may be directed to stdout, stderr, and/or syslog based on
* configuration. The contents of buf is printed out has hex dump.
*/
+ if (level < CONFIG_MSG_MIN_PRIORITY)
+ return;
+
-+ _wpa_hexdump(level, title, buf, len, 1);
++ _wpa_hexdump(level, title, buf, len, 1, 1);
+}
static inline void wpa_hexdump_buf(int level, const char *title,
const struct wpabuf *buf)
-@@ -108,7 +131,13 @@ static inline void wpa_hexdump_buf(int l
+@@ -106,7 +129,13 @@ static inline void wpa_hexdump_buf(int l
* like wpa_hexdump(), but by default, does not include secret keys (passwords,
* etc.) in debug output.
*/
+ if (level < CONFIG_MSG_MIN_PRIORITY)
+ return;
+
-+ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys);
++ _wpa_hexdump(level, title, buf, len, wpa_debug_show_keys, 1);
+}
static inline void wpa_hexdump_buf_key(int level, const char *title,
const struct wpabuf *buf)
-@@ -130,8 +159,14 @@ static inline void wpa_hexdump_buf_key(i
+@@ -128,8 +157,14 @@ static inline void wpa_hexdump_buf_key(i
* the hex numbers and ASCII characters (for printable range) are shown. 16
* bytes per line will be shown.
*/
/**
* wpa_hexdump_ascii_key - conditional hex dump, hide keys
-@@ -147,8 +182,14 @@ void wpa_hexdump_ascii(int level, const
+@@ -145,8 +180,14 @@ void wpa_hexdump_ascii(int level, const
* bytes per line will be shown. This works like wpa_hexdump_ascii(), but by
* default, does not include secret keys (passwords, etc.) in debug output.
*/
/*
* wpa_dbg() behaves like wpa_msg(), but it can be removed from build to reduce
-@@ -185,7 +226,12 @@ void wpa_hexdump_ascii_key(int level, co
+@@ -183,7 +224,12 @@ void wpa_hexdump_ascii_key(int level, co
*
* Note: New line '\n' is added to the end of the text when printing to stdout.
*/
/**
* wpa_msg_ctrl - Conditional printf for ctrl_iface monitors
-@@ -199,8 +245,13 @@ void wpa_msg(void *ctx, int level, const
+@@ -197,8 +243,13 @@ void wpa_msg(void *ctx, int level, const
* attached ctrl_iface monitors. In other words, it can be used for frequent
* events that do not need to be sent to syslog.
*/
#include "crypto/random.h"
#include "crypto/tls.h"
#include "common/version.h"
-@@ -690,7 +691,7 @@ int main(int argc, char *argv[])
+@@ -688,7 +689,7 @@ int main(int argc, char *argv[])
wpa_supplicant_event = hostapd_wpa_event;
wpa_supplicant_event_global = hostapd_wpa_event_global;
for (;;) {
if (c < 0)
break;
switch (c) {
-@@ -727,6 +728,8 @@ int main(int argc, char *argv[])
+@@ -725,6 +726,8 @@ int main(int argc, char *argv[])
break;
#endif /* CONFIG_DEBUG_LINUX_TRACING */
case 'v':
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
-@@ -385,7 +385,6 @@ static int hostapd_cli_cmd_disassociate(
+@@ -388,7 +388,6 @@ static int hostapd_cli_cmd_disassociate(
}
static int hostapd_cli_cmd_signature(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
-@@ -398,7 +397,6 @@ static int hostapd_cli_cmd_signature(str
+@@ -401,7 +400,6 @@ static int hostapd_cli_cmd_signature(str
os_snprintf(buf, sizeof(buf), "SIGNATURE %s", argv[0]);
return wpa_ctrl_command(ctrl, buf);
}
-#endif /* CONFIG_TAXONOMY */
- #ifdef CONFIG_IEEE80211W
-@@ -417,7 +415,6 @@ static int hostapd_cli_cmd_sa_query(stru
- #endif /* CONFIG_IEEE80211W */
+ static int hostapd_cli_cmd_sa_query(struct wpa_ctrl *ctrl, int argc,
+@@ -418,7 +416,6 @@ static int hostapd_cli_cmd_sa_query(stru
+ }
-#ifdef CONFIG_WPS
static int hostapd_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
-@@ -643,7 +640,6 @@ static int hostapd_cli_cmd_wps_config(st
+@@ -644,7 +641,6 @@ static int hostapd_cli_cmd_wps_config(st
ssid_hex, argv[1]);
return wpa_ctrl_command(ctrl, buf);
}
static int hostapd_cli_cmd_disassoc_imminent(struct wpa_ctrl *ctrl, int argc,
-@@ -1538,15 +1534,12 @@ static const struct hostapd_cli_cmd host
+@@ -1532,13 +1528,10 @@ static const struct hostapd_cli_cmd host
{ "disassociate", hostapd_cli_cmd_disassociate,
hostapd_complete_stations,
"<addr> = disassociate a station" },
{ "signature", hostapd_cli_cmd_signature, hostapd_complete_stations,
"<addr> = get taxonomy signature for a station" },
-#endif /* CONFIG_TAXONOMY */
- #ifdef CONFIG_IEEE80211W
{ "sa_query", hostapd_cli_cmd_sa_query, hostapd_complete_stations,
"<addr> = send SA Query to a station" },
- #endif /* CONFIG_IEEE80211W */
-#ifdef CONFIG_WPS
{ "wps_pin", hostapd_cli_cmd_wps_pin, NULL,
"<uuid> <pin> [timeout] [addr] = add WPS Enrollee PIN" },
{ "wps_check_pin", hostapd_cli_cmd_wps_check_pin, NULL,
-@@ -1571,7 +1564,6 @@ static const struct hostapd_cli_cmd host
+@@ -1563,7 +1556,6 @@ static const struct hostapd_cli_cmd host
"<SSID> <auth> <encr> <key> = configure AP" },
{ "wps_get_status", hostapd_cli_cmd_wps_get_status, NULL,
"= show current WPS status" },
#ifndef CONFIG_NO_HOSTAPD_LOGGER
-@@ -149,6 +151,14 @@ static void hostapd_logger_cb(void *ctx,
+@@ -146,6 +148,14 @@ static void hostapd_logger_cb(void *ctx,
}
#endif /* CONFIG_NO_HOSTAPD_LOGGER */
/**
* hostapd_driver_init - Preparate driver interface
-@@ -167,6 +177,8 @@ static int hostapd_driver_init(struct ho
+@@ -164,6 +174,8 @@ static int hostapd_driver_init(struct ho
return -1;
}
/* Initialize the driver interface */
if (!(b[0] | b[1] | b[2] | b[3] | b[4] | b[5]))
b = NULL;
-@@ -407,8 +419,6 @@ static void hostapd_global_deinit(const
+@@ -404,8 +416,6 @@ static void hostapd_global_deinit(const
#endif /* CONFIG_NATIVE_WINDOWS */
eap_server_unregister_methods();
}
-@@ -434,18 +444,6 @@ static int hostapd_global_run(struct hap
+@@ -431,18 +441,6 @@ static int hostapd_global_run(struct hap
}
#endif /* EAP_SERVER_TNC */
eloop_run();
return 0;
-@@ -647,8 +645,7 @@ int main(int argc, char *argv[])
+@@ -645,8 +643,7 @@ int main(int argc, char *argv[])
struct hapd_interfaces interfaces;
int ret = 1;
size_t i, j;
#include "common/defs.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_common.h"
-@@ -819,6 +820,9 @@ struct wpa_driver_associate_params {
+@@ -850,6 +851,9 @@ struct wpa_driver_associate_params {
* responsible for selecting with which BSS to associate. */
const u8 *bssid;
*
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
-@@ -17,6 +17,7 @@
+@@ -18,6 +18,7 @@
#include "eap_peer/eap.h"
#include "p2p/p2p.h"
#include "fst/fst.h"
#include "config.h"
-@@ -2130,6 +2131,97 @@ static char * wpa_config_write_peerkey(c
+@@ -2269,6 +2270,97 @@ static char * wpa_config_write_peerkey(c
#endif /* NO_CONFIG_WRITE */
/* Helper macros for network block parser */
#ifdef OFFSET
-@@ -2382,6 +2474,8 @@ static const struct parse_data ssid_fiel
+@@ -2551,6 +2643,8 @@ static const struct parse_data ssid_fiel
{ INT(ap_max_inactivity) },
{ INT(dtim_period) },
{ INT(beacon_int) },
#define DEFAULT_EAP_WORKAROUND ((unsigned int) -1)
-@@ -790,6 +792,9 @@ struct wpa_ssid {
+@@ -832,6 +834,9 @@ struct wpa_ssid {
*/
void *parent_cred;
* macsec_policy - Determines the policy for MACsec secure session
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -3266,6 +3266,12 @@ static void wpas_start_assoc_cb(struct w
+@@ -3615,6 +3615,12 @@ static void wpas_start_assoc_cb(struct w
params.beacon_int = ssid->beacon_int;
else
params.beacon_int = wpa_s->conf->beacon_int;
-+ i = 0;
++ int i = 0;
+ while (i < WLAN_SUPP_RATES_MAX) {
+ params.rates[i] = ssid->rates[i];
+ i++;
+ params.mcast_rate = ssid->mcast_rate;
}
- params.pairwise_suite = cipher_pairwise;
+ if (bss && ssid->enable_edmg)
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -5323,7 +5323,7 @@ static int wpa_driver_nl80211_ibss(struc
+@@ -5573,7 +5573,7 @@ static int wpa_driver_nl80211_ibss(struc
struct wpa_driver_associate_params *params)
{
struct nl_msg *msg;
int count = 0;
wpa_printf(MSG_DEBUG, "nl80211: Join IBSS (ifindex=%d)", drv->ifindex);
-@@ -5350,6 +5350,37 @@ retry:
+@@ -5600,6 +5600,37 @@ retry:
nl80211_put_beacon_int(msg, params->beacon_int))
goto fail;
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
-@@ -1484,6 +1484,7 @@ struct wpa_driver_mesh_join_params {
+@@ -1546,6 +1546,7 @@ struct wpa_driver_mesh_join_params {
+ #define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004
#define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008
unsigned int flags;
- u8 handle_dfs;
+ int mcast_rate;
};
- /**
+ struct wpa_driver_set_key_params {
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -9612,6 +9612,18 @@ static int nl80211_put_mesh_id(struct nl
+@@ -9959,6 +9959,18 @@ static int nl80211_put_mesh_id(struct nl
}
static int nl80211_put_mesh_config(struct nl_msg *msg,
struct wpa_driver_mesh_bss_params *params)
{
-@@ -9673,6 +9685,7 @@ static int nl80211_join_mesh(struct i802
+@@ -10017,6 +10029,7 @@ static int nl80211_join_mesh(struct i802
nl80211_put_basic_rates(msg, params->basic_rates) ||
nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
nl80211_put_beacon_int(msg, params->beacon_int) ||
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
-@@ -494,6 +494,7 @@ int wpa_supplicant_join_mesh(struct wpa_
+@@ -460,6 +460,7 @@ int wpa_supplicant_join_mesh(struct wpa_
params->meshid = ssid->ssid;
params->meshid_len = ssid->ssid_len;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2216,11 +2216,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
+@@ -2402,11 +2402,13 @@ void ibss_mesh_setup_freq(struct wpa_sup
for (j = 0; j < wpa_s->last_scan_res_used; j++) {
struct wpa_bss *bss = wpa_s->last_scan_res[j];
--- a/src/ap/acs.c
+++ b/src/ap/acs.c
-@@ -293,18 +293,12 @@ static void acs_fail(struct hostapd_ifac
+@@ -302,18 +302,12 @@ static void acs_fail(struct hostapd_ifac
static long double
acs_survey_interference_factor(struct freq_survey *survey, s8 min_nf)
{
total = survey->channel_time;
-@@ -406,20 +400,19 @@ static int acs_usable_vht160_chan(const
+@@ -415,20 +409,19 @@ static int acs_usable_vht160_chan(const
static int acs_survey_is_sufficient(struct freq_survey *survey)
{
if (!(survey->filled & SURVEY_HAS_NF)) {
--- a/hostapd/Makefile
+++ b/hostapd/Makefile
-@@ -1332,14 +1332,14 @@ hostapd_multi.a: $(BCHECK) $(OBJS)
+@@ -1310,14 +1310,14 @@ hostapd_multi.a: $(BCHECK) $(OBJS)
@$(AR) cr $@ hostapd_multi.o $(OBJS)
hostapd: $(BCHECK) $(OBJS)
NOBJS = nt_password_hash.o ../src/crypto/ms_funcs.o $(SHA1OBJS)
--- a/wpa_supplicant/Makefile
+++ b/wpa_supplicant/Makefile
-@@ -1932,23 +1932,23 @@ wpa_supplicant_multi.a: .config $(BCHECK
+@@ -1920,23 +1920,23 @@ wpa_supplicant_multi.a: .config $(BCHECK
@$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
wpa_supplicant: $(BCHECK) $(OBJS) $(EXTRA_progs)
--- a/hostapd/Makefile
+++ b/hostapd/Makefile
-@@ -165,6 +165,11 @@ OBJS += ../src/common/hw_features_common
+@@ -167,6 +167,11 @@ OBJS += ../src/common/hw_features_common
OBJS += ../src/eapol_auth/eapol_auth_sm.o
#define OCE_STA_CFON_ENABLED(hapd) \
((hapd->conf->oce & OCE_STA_CFON) && \
-@@ -72,6 +73,7 @@ struct hapd_interfaces {
- #ifdef CONFIG_DPP
- struct dpp_global *dpp;
- #endif /* CONFIG_DPP */
+@@ -80,7 +81,7 @@ struct hapd_interfaces {
+ #ifdef CONFIG_CTRL_IFACE_UDP
+ unsigned char ctrl_iface_cookie[CTRL_IFACE_COOKIE_LEN];
+ #endif /* CONFIG_CTRL_IFACE_UDP */
+-
+ struct ubus_object ubus;
};
enum hostapd_chan_status {
-@@ -145,6 +147,7 @@ struct hostapd_data {
+@@ -154,6 +155,7 @@ struct hostapd_data {
struct hostapd_iface *iface;
struct hostapd_config *iconf;
struct hostapd_bss_config *conf;
int interface_added; /* virtual interface added for this BSS */
unsigned int started:1;
unsigned int disabled:1;
-@@ -580,6 +583,7 @@ hostapd_alloc_bss_data(struct hostapd_if
+@@ -588,6 +590,7 @@ hostapd_alloc_bss_data(struct hostapd_if
struct hostapd_bss_config *bss);
int hostapd_setup_interface(struct hostapd_iface *iface);
int hostapd_setup_interface_complete(struct hostapd_iface *iface, int err);
struct hostapd_iface * hostapd_alloc_iface(void);
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
-@@ -380,6 +380,7 @@ static void hostapd_free_hapd_data(struc
+@@ -391,6 +391,7 @@ static void hostapd_free_hapd_data(struc
hapd->beacon_set_done = 0;
wpa_printf(MSG_DEBUG, "%s(%s)", __func__, hapd->conf->iface);
+ hostapd_ubus_free_bss(hapd);
- iapp_deinit(hapd->iapp);
- hapd->iapp = NULL;
accounting_deinit(hapd);
-@@ -1377,6 +1378,8 @@ static int hostapd_setup_bss(struct host
+ hostapd_deinit_wpa(hapd);
+ vlan_deinit(hapd);
+@@ -1392,6 +1393,8 @@ static int hostapd_setup_bss(struct host
if (hapd->driver && hapd->driver->set_operstate)
hapd->driver->set_operstate(hapd->drv_priv, 1);
return 0;
}
-@@ -1891,6 +1894,7 @@ static int hostapd_setup_interface_compl
+@@ -1967,6 +1970,7 @@ static int hostapd_setup_interface_compl
if (err)
goto fail;
+ hostapd_ubus_add_iface(iface);
wpa_printf(MSG_DEBUG, "Completing interface initialization");
- if (iface->conf->channel) {
+ if (iface->freq) {
#ifdef NEED_AP_MLME
-@@ -2087,6 +2091,7 @@ dfs_offload:
+@@ -2157,6 +2161,7 @@ dfs_offload:
fail:
wpa_printf(MSG_ERROR, "Interface initialization failed");
hostapd_set_state(iface, HAPD_IFACE_DISABLED);
wpa_msg(hapd->msg_ctx, MSG_INFO, AP_EVENT_DISABLED);
#ifdef CONFIG_FST
-@@ -2562,6 +2567,7 @@ void hostapd_interface_deinit_free(struc
+@@ -2630,6 +2635,7 @@ void hostapd_interface_deinit_free(struc
(unsigned int) iface->conf->num_bss);
driver = iface->bss[0]->driver;
drv_priv = iface->bss[0]->drv_priv;
__func__, driver, drv_priv);
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
-@@ -2032,7 +2032,7 @@ static void handle_auth(struct hostapd_d
+@@ -2252,13 +2252,18 @@ static void handle_auth(struct hostapd_d
u16 auth_alg, auth_transaction, status_code;
u16 resp = WLAN_STATUS_SUCCESS;
struct sta_info *sta = NULL;
+ int res, reply_res, ubus_resp;
u16 fc;
const u8 *challenge = NULL;
- u32 session_timeout, acct_interim_interval;
-@@ -2043,6 +2043,11 @@ static void handle_auth(struct hostapd_d
- char *identity = NULL;
- char *radius_cui = NULL;
+ u8 resp_ies[2 + WLAN_AUTH_CHALLENGE_LEN];
+ size_t resp_ies_len = 0;
u16 seq_ctrl;
+ struct radius_sta rad_info;
+ struct hostapd_ubus_request req = {
+ .type = HOSTAPD_UBUS_AUTH_REQ,
+ .mgmt_frame = mgmt,
if (len < IEEE80211_HDRLEN + sizeof(mgmt->u.auth)) {
wpa_printf(MSG_INFO, "handle_auth - too short payload (len=%lu)",
-@@ -2204,6 +2209,13 @@ static void handle_auth(struct hostapd_d
+@@ -2418,6 +2423,13 @@ static void handle_auth(struct hostapd_d
resp = WLAN_STATUS_UNSPECIFIED_FAILURE;
goto fail;
}
if (res == HOSTAPD_ACL_PENDING)
return;
-@@ -3862,7 +3874,7 @@ static void handle_assoc(struct hostapd_
- u16 capab_info, listen_interval, seq_ctrl, fc;
- u16 resp = WLAN_STATUS_SUCCESS, reply_res;
+@@ -4078,7 +4090,7 @@ static void handle_assoc(struct hostapd_
+ int resp = WLAN_STATUS_SUCCESS;
+ u16 reply_res;
const u8 *pos;
- int left, i;
+ int left, i, ubus_resp;
struct sta_info *sta;
u8 *tmp = NULL;
- struct hostapd_sta_wpa_psk_short *psk = NULL;
-@@ -3871,6 +3883,11 @@ static void handle_assoc(struct hostapd_
#ifdef CONFIG_FILS
- int delay_assoc = 0;
+@@ -4291,6 +4303,11 @@ static void handle_assoc(struct hostapd_
+ left = res;
+ }
#endif /* CONFIG_FILS */
+ struct hostapd_ubus_request req = {
+ .type = HOSTAPD_UBUS_ASSOC_REQ,
+ .ssi_signal = rssi,
+ };
- if (len < IEEE80211_HDRLEN + (reassoc ? sizeof(mgmt->u.reassoc_req) :
- sizeof(mgmt->u.assoc_req))) {
-@@ -4050,6 +4067,14 @@ static void handle_assoc(struct hostapd_
- }
- #endif /* CONFIG_MBO */
+ /* followed by SSID and Supported rates; and HT capabilities if 802.11n
+ * is used */
+@@ -4455,6 +4472,14 @@ static void handle_assoc(struct hostapd_
+ pos, left, rssi, omit_rsnxe);
+ os_free(tmp);
+ ubus_resp = hostapd_ubus_handle_event(hapd, &req);
+ if (ubus_resp) {
+ }
+
/*
- * sta->capability is used in check_assoc_ies() for RRM enabled
- * capability element.
-@@ -4277,6 +4302,7 @@ static void handle_disassoc(struct hosta
+ * Remove the station in case tranmission of a success response fails
+ * (the STA was added associated to the driver) or if the station was
+@@ -4482,6 +4507,7 @@ static void handle_disassoc(struct hosta
wpa_printf(MSG_DEBUG, "disassocation: STA=" MACSTR " reason_code=%d",
MAC2STR(mgmt->sa),
le_to_host16(mgmt->u.disassoc.reason_code));
sta = ap_get_sta(hapd, mgmt->sa);
if (sta == NULL) {
-@@ -4342,6 +4368,8 @@ static void handle_deauth(struct hostapd
+@@ -4548,6 +4574,8 @@ static void handle_deauth(struct hostapd
" reason_code=%d",
MAC2STR(mgmt->sa), le_to_host16(mgmt->u.deauth.reason_code));
wpa_msg(hapd->msg_ctx, MSG_DEBUG, "Station " MACSTR " trying "
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
-@@ -746,6 +746,12 @@ void handle_probe_req(struct hostapd_dat
- struct hostapd_sta_wpa_psk_short *psk = NULL;
- char *identity = NULL;
- char *radius_cui = NULL;
+@@ -810,6 +810,12 @@ void handle_probe_req(struct hostapd_dat
+ u16 csa_offs[2];
+ size_t csa_offs_len;
+ struct radius_sta rad_info;
+ struct hostapd_ubus_request req = {
+ .type = HOSTAPD_UBUS_PROBE_REQ,
+ .mgmt_frame = mgmt,
if (len < IEEE80211_HDRLEN)
return;
-@@ -923,6 +929,12 @@ void handle_probe_req(struct hostapd_dat
+@@ -992,6 +998,12 @@ void handle_probe_req(struct hostapd_dat
}
#endif /* CONFIG_P2P */
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
-@@ -118,6 +118,10 @@ int hostapd_notif_assoc(struct hostapd_d
+@@ -119,6 +119,10 @@ int hostapd_notif_assoc(struct hostapd_d
u16 reason = WLAN_REASON_UNSPECIFIED;
- u16 status = WLAN_STATUS_SUCCESS;
+ int status = WLAN_STATUS_SUCCESS;
const u8 *p2p_dev_addr = NULL;
+ struct hostapd_ubus_request req = {
+ .type = HOSTAPD_UBUS_ASSOC_REQ,
if (addr == NULL) {
/*
-@@ -210,6 +214,12 @@ int hostapd_notif_assoc(struct hostapd_d
+@@ -211,6 +215,12 @@ int hostapd_notif_assoc(struct hostapd_d
goto fail;
}
wpabuf_free(sta->p2p_ie);
--- a/src/ap/sta_info.c
+++ b/src/ap/sta_info.c
-@@ -424,6 +424,7 @@ void ap_handle_timer(void *eloop_ctx, vo
+@@ -423,6 +423,7 @@ void ap_handle_timer(void *eloop_ctx, vo
HOSTAPD_LEVEL_INFO, "deauthenticated due to "
"local deauth request");
ap_free_sta(hapd, sta);
break;
}
}
-@@ -1284,6 +1286,7 @@ void ap_sta_set_authorized(struct hostap
+@@ -1293,6 +1295,7 @@ void ap_sta_set_authorized(struct hostap
buf, ip_addr, keyid_buf);
} else {
wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_DISCONNECTED "%s", buf);
hapd->msg_ctx_parent != hapd->msg_ctx)
--- a/src/ap/wpa_auth_glue.c
+++ b/src/ap/wpa_auth_glue.c
-@@ -185,6 +185,7 @@ static void hostapd_wpa_auth_psk_failure
+@@ -251,6 +251,7 @@ static void hostapd_wpa_auth_psk_failure
struct hostapd_data *hapd = ctx;
wpa_msg(hapd->msg_ctx, MSG_INFO, AP_STA_POSSIBLE_PSK_MISMATCH MACSTR,
MAC2STR(addr));
--- a/wpa_supplicant/Makefile
+++ b/wpa_supplicant/Makefile
-@@ -188,6 +188,12 @@ ifdef CONFIG_EAPOL_TEST
+@@ -190,6 +190,12 @@ ifdef CONFIG_EAPOL_TEST
CFLAGS += -Werror -DEAPOL_TEST
endif
ifdef CONFIG_CODE_COVERAGE
CFLAGS += -O0 -fprofile-arcs -ftest-coverage
LIBS += -lgcov
-@@ -945,6 +951,9 @@ endif
- ifdef CONFIG_IEEE80211AX
- OBJS += ../src/ap/ieee802_11_he.o
+@@ -877,6 +883,9 @@ OBJS += ../src/pae/ieee802_1x_secy_ops.o
+ ifdef CONFIG_AP
+ OBJS += ../src/ap/wpa_auth_kay.o
endif
+ifdef CONFIG_UBUS
+OBJS += ../src/ap/ubus.o
+endif
endif
- ifdef CONFIG_WNM_AP
- CFLAGS += -DCONFIG_WNM_AP
+
+ ifdef CONFIG_IEEE8021X_EAPOL
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -6297,6 +6297,8 @@ struct wpa_supplicant * wpa_supplicant_a
+@@ -6771,6 +6771,8 @@ struct wpa_supplicant * wpa_supplicant_a
}
#endif /* CONFIG_P2P */
return wpa_s;
}
-@@ -6323,6 +6325,8 @@ int wpa_supplicant_remove_iface(struct w
+@@ -6797,6 +6799,8 @@ int wpa_supplicant_remove_iface(struct w
struct wpa_supplicant *parent = wpa_s->parent;
#endif /* CONFIG_MESH */
/* Remove interface from the global list of interfaces */
prev = global->ifaces;
if (prev == wpa_s) {
-@@ -6626,8 +6630,12 @@ int wpa_supplicant_run(struct wpa_global
+@@ -7100,8 +7104,12 @@ int wpa_supplicant_run(struct wpa_global
eloop_register_signal_terminate(wpa_supplicant_terminate, global);
eloop_register_signal_reconfig(wpa_supplicant_reconfig, global);
extern const char *const wpa_supplicant_version;
extern const char *const wpa_supplicant_license;
-@@ -306,6 +307,8 @@ struct wpa_global {
+@@ -310,6 +311,8 @@ struct wpa_global {
#endif /* CONFIG_WIFI_DISPLAY */
struct psk_list_entry *add_psk; /* From group formation */
};
-@@ -506,6 +509,7 @@ struct wpa_supplicant {
+@@ -520,6 +523,7 @@ struct wpa_supplicant {
unsigned char own_addr[ETH_ALEN];
unsigned char perm_addr[ETH_ALEN];
char ifname[100];
--- a/hostapd/main.c
+++ b/hostapd/main.c
-@@ -894,6 +894,7 @@ int main(int argc, char *argv[])
+@@ -892,6 +892,7 @@ int main(int argc, char *argv[])
}
hostapd_global_ctrl_iface_init(&interfaces);
if (hostapd_global_run(&interfaces, daemonize, pid_file)) {
wpa_printf(MSG_ERROR, "Failed to start eloop");
-@@ -903,6 +904,7 @@ int main(int argc, char *argv[])
+@@ -901,6 +902,7 @@ int main(int argc, char *argv[])
ret = 0;
out:
--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
-@@ -2470,6 +2470,8 @@ static int hostapd_config_fill(struct ho
+@@ -2460,6 +2460,8 @@ static int hostapd_config_fill(struct ho
bss->isolate = atoi(pos);
} else if (os_strcmp(buf, "ap_max_inactivity") == 0) {
bss->ap_max_inactivity = atoi(pos);
} else if (os_strcmp(buf, "skip_inactivity_poll") == 0) {
bss->skip_inactivity_poll = atoi(pos);
} else if (os_strcmp(buf, "country_code") == 0) {
-@@ -3131,6 +3133,8 @@ static int hostapd_config_fill(struct ho
+@@ -3156,6 +3158,8 @@ static int hostapd_config_fill(struct ho
}
} else if (os_strcmp(buf, "acs_exclude_dfs") == 0) {
conf->acs_exclude_dfs = atoi(pos);
+ } else if (os_strcmp(buf, "radio_config_id") == 0) {
+ conf->config_id = os_strdup(pos);
+ } else if (os_strcmp(buf, "op_class") == 0) {
+ conf->op_class = atoi(pos);
} else if (os_strcmp(buf, "channel") == 0) {
- if (os_strcmp(pos, "acs_survey") == 0) {
- #ifndef CONFIG_ACS
--- a/src/ap/ap_config.c
+++ b/src/ap/ap_config.c
-@@ -698,6 +698,7 @@ void hostapd_config_free_bss(struct host
+@@ -772,6 +772,7 @@ void hostapd_config_free_bss(struct host
os_free(conf->radius_req_attr_sqlite);
os_free(conf->rsn_preauth_interfaces);
os_free(conf->ctrl_interface);
os_free(conf->ca_cert);
os_free(conf->server_cert);
os_free(conf->server_cert2);
-@@ -881,6 +882,7 @@ void hostapd_config_free(struct hostapd_
+@@ -964,6 +965,7 @@ void hostapd_config_free(struct hostapd_
for (i = 0; i < conf->num_bss; i++)
hostapd_config_free_bss(conf->bss[i]);
os_free(conf->basic_rates);
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
-@@ -829,6 +829,7 @@ struct hostapd_bss_config {
+@@ -859,6 +859,7 @@ struct hostapd_bss_config {
*/
u8 mka_psk_set;
#endif /* CONFIG_MACSEC */
};
/**
-@@ -1012,6 +1013,7 @@ struct hostapd_config {
+@@ -1050,6 +1051,7 @@ struct hostapd_config {
unsigned int airtime_update_interval;
#define AIRTIME_MODE_MAX (__AIRTIME_MODE_MAX - 1)
#endif /* CONFIG_AIRTIME_POLICY */
--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
-@@ -206,6 +206,10 @@ static int hostapd_iface_conf_changed(st
+@@ -216,6 +216,10 @@ static int hostapd_iface_conf_changed(st
{
size_t i;
if (newconf->num_bss != oldconf->num_bss)
return 1;
-@@ -219,7 +223,7 @@ static int hostapd_iface_conf_changed(st
+@@ -229,7 +233,7 @@ static int hostapd_iface_conf_changed(st
}
{
struct hapd_interfaces *interfaces = iface->interfaces;
struct hostapd_data *hapd = iface->bss[0];
-@@ -242,13 +246,16 @@ int hostapd_reload_config(struct hostapd
+@@ -252,13 +256,16 @@ int hostapd_reload_config(struct hostapd
if (newconf == NULL)
return -1;
wpa_printf(MSG_DEBUG,
"Configuration changes include interface/BSS modification - force full disable+enable sequence");
fname = os_strdup(iface->config_fname);
-@@ -273,6 +280,22 @@ int hostapd_reload_config(struct hostapd
+@@ -283,6 +290,24 @@ int hostapd_reload_config(struct hostapd
wpa_printf(MSG_ERROR,
"Failed to enable interface on config reload");
return res;
+ if (!hapd->config_id || strcmp(hapd->config_id, newconf->bss[j]->config_id)) {
+ hostapd_flush_old_stations(iface->bss[j],
+ WLAN_REASON_PREV_AUTH_NOT_VALID);
++#ifdef CONFIG_WEP
+ hostapd_broadcast_wep_clear(iface->bss[j]);
++#endif
+
+#ifndef CONFIG_NO_RADIUS
+ /* TODO: update dynamic data based on changed configuration
}
iface->conf = newconf;
-@@ -289,6 +312,12 @@ int hostapd_reload_config(struct hostapd
+@@ -299,6 +324,12 @@ int hostapd_reload_config(struct hostapd
for (j = 0; j < iface->num_bss; j++) {
hapd = iface->bss[j];
hapd->iconf = newconf;
hapd->conf = newconf->bss[j];
hostapd_reload_bss(hapd);
-@@ -2257,6 +2286,10 @@ hostapd_alloc_bss_data(struct hostapd_if
+@@ -2329,6 +2360,10 @@ hostapd_alloc_bss_data(struct hostapd_if
hapd->iconf = conf;
hapd->conf = bss;
hapd->iface = hapd_iface;
hapd->ctrl_sock = -1;
--- a/src/ap/hostapd.h
+++ b/src/ap/hostapd.h
-@@ -42,7 +42,7 @@ struct mesh_conf;
+@@ -46,7 +46,7 @@ struct mesh_conf;
struct hostapd_iface;
struct hapd_interfaces {
struct hostapd_config * (*config_read_cb)(const char *config_fname);
int (*ctrl_iface_init)(struct hostapd_data *hapd);
void (*ctrl_iface_deinit)(struct hostapd_data *hapd);
-@@ -148,6 +148,7 @@ struct hostapd_data {
+@@ -156,6 +156,7 @@ struct hostapd_data {
struct hostapd_config *iconf;
struct hostapd_bss_config *conf;
struct hostapd_ubus_bss ubus;
int interface_added; /* virtual interface added for this BSS */
unsigned int started:1;
unsigned int disabled:1;
-@@ -575,7 +576,7 @@ struct hostapd_iface {
+@@ -582,7 +583,7 @@ struct hostapd_iface {
int hostapd_for_each_interface(struct hapd_interfaces *interfaces,
int (*cb)(struct hostapd_iface *iface,
void *ctx), void *ctx);
hostapd_alloc_bss_data(struct hostapd_iface *hapd_iface,
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
-@@ -4295,6 +4295,9 @@ static int wpa_driver_nl80211_set_ap(voi
+@@ -4486,6 +4486,9 @@ static int wpa_driver_nl80211_set_ap(voi
if (ret) {
wpa_printf(MSG_DEBUG, "nl80211: Beacon set failed: %d (%s)",
ret, strerror(-ret));
nl80211_set_bss(bss, params->cts_protect, params->preamble,
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
-@@ -182,7 +182,7 @@ static int hostapd_ctrl_iface_update(str
+@@ -184,7 +184,7 @@ static int hostapd_ctrl_iface_update(str
iface->interfaces->config_read_cb = hostapd_ctrl_iface_config_read;
reload_opts = txt;
}
--- a/hostapd/main.c
+++ b/hostapd/main.c
-@@ -320,7 +320,7 @@ static void handle_term(int sig, void *s
+@@ -317,7 +317,7 @@ static void handle_term(int sig, void *s
static int handle_reload_iface(struct hostapd_iface *iface, void *ctx)
{
}
--- a/src/ap/wps_hostapd.c
+++ b/src/ap/wps_hostapd.c
-@@ -275,7 +275,7 @@ static void wps_reload_config(void *eloo
+@@ -315,7 +315,7 @@ static void wps_reload_config(void *eloo
wpa_printf(MSG_DEBUG, "WPS: Reload configuration data");
if (iface->interfaces == NULL ||
+++ /dev/null
-From 39042d7f7c4997af55474ebe4513c81f00732837 Mon Sep 17 00:00:00 2001
-From: Rosen Penev <rosenp@gmail.com>
-Date: Sat, 24 Aug 2019 15:01:16 -0700
-Subject: os_sleep: Use nanosleep for POSIX versions 2008 and higher
-
-uClibc-ng optionally disabled deprecated POSIX functions like usleep,
-causing compilation failures. This switches to nanosleep while retaining
-support for older libcs that do not support nanosleep.
-
-Signed-off-by: Rosen Penev <rosenp@gmail.com>
----
- src/utils/os_internal.c | 6 ++++++
- src/utils/os_unix.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/src/utils/os_internal.c
-+++ b/src/utils/os_internal.c
-@@ -25,10 +25,16 @@
-
- void os_sleep(os_time_t sec, os_time_t usec)
- {
-+#if defined(_POSIX_C_SOURCE) && (_POSIX_C_SOURCE >= 200809L)
-+ const struct timespec req = { sec, usec * 1000 };
-+
-+ nanosleep(&req, NULL);
-+#else
- if (sec)
- sleep(sec);
- if (usec)
- usleep(usec);
-+#endif
- }
-
-
---- a/src/utils/os_unix.c
-+++ b/src/utils/os_unix.c
-@@ -50,10 +50,16 @@ struct os_alloc_trace {
-
- void os_sleep(os_time_t sec, os_time_t usec)
- {
-+#if defined(_POSIX_C_SOURCE) && (_POSIX_C_SOURCE >= 200809L)
-+ const struct timespec req = { sec, usec * 1000 };
-+
-+ nanosleep(&req, NULL);
-+#else
- if (sec)
- sleep(sec);
- if (usec)
- usleep(usec);
-+#endif
- }
-
-
projects / oweals / openwrt.git / commitdiff