#
-# Copyright (C) 2012-2015 OpenWrt.org
+# Copyright (C) 2012-2016 OpenWrt.org
+# Copyright (C) 2016 LEDE-project.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
+
+JFFS2_BLOCKSIZE = 128k
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-LOADADDR:=0x00008000
+DEVICE_VARS += BOOT_SCRIPT UBOOT
+KERNEL_LOADADDR := 0x00008000
-JFFS2_BLOCKSIZE = 128k
+define Build/boot-scr
+ rm -f $@-boot.scr
+ sed \
+ -e 's#@ROOT@#$(IMG_PART_SIGNATURE)#g' \
+ -e 's#@DTB@#$(firstword $(DEVICE_DTS))#g' \
+ $(BOOT_SCRIPT).bootscript > $@-new.bootscript
+ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $@-new.bootscript $@-boot.scr
+endef
-KDIR_TMP:=$(KDIR)/tmp
+define Build/boot-img
+ rm -f $@.boot
+ mkfs.fat -C $@.boot $$(( $(CONFIG_TARGET_KERNEL_PARTSIZE) * 1024 ))
+ $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(KDIR)/image-$(dts).dtb ::$(dts).dtb;)
+ mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_NAME)
+ -mcopy -i $@.boot $@-boot.scr ::boot.scr
+endef
+define Build/boot-img-ext4
+ rm -fR $@.boot
+ mkdir -p $@.boot
+ $(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+ $(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+ -$(CP) $@-boot.scr $@.boot/boot.scr
+ make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M $@.bootimg $@.boot
+endef
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
+define Build/buffalo-kernel-jffs2
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+ mkdir -p $(KDIR)/kernel_jffs2
+ dd if=/dev/zero of=$@.fakerd bs=131008 count=1 conv=sync
+ $(STAGING_DIR_HOST)/bin/mkimage \
+ -T ramdisk -A $(LINUX_KARCH) -O linux -C gzip -n 'fake initrd' \
+ -d $@.fakerd $(KDIR)/kernel_jffs2/initrd.buffalo
+ cp $@ $(KDIR)/kernel_jffs2/uImage.buffalo
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --little-endian -v --squash-uids -q -f -n -x lzma -x rtime -m none \
+ --eraseblock=128KiB --pad=$(KERNEL_SIZE) -d $(KDIR)/kernel_jffs2 -o $@
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+endef
-define Image/Build/DTB
- cp $(KDIR)/zImage$(2) $(KDIR)/zImage$(2)-$(1);
- cat $(DTS_DIR)/$(1).dtb >> $(KDIR)/zImage$(2)-$(1);
- $(call Image/BuildKernel/MkuImage, \
- none, $(LOADADDR), $(LOADADDR), \
- $(KDIR)/zImage$(2)-$(1), $(KDIR)/uImage$(2)-$(1))
-# The next line will be dropped, migrate your board to use a single firmware file
- cp $(KDIR)/uImage$(2)-$(1) $(UIMAGE)$(2)-$(1);
+define Build/sdcard-img
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ c $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
endef
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-# $(4): Page Size
-# $(5): Sub-Page Size (optional)
-define NANDProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/BuildSysupgrade
- $(call Image/Build/SysupgradeNAND,$(2),$$(1),$(KDIR)/uImage-$(2))
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(call Image/Build/UbinizeImage,$(2),,squashfs, -p $(3) -m $(4) $(if $(5),-s $(5)))
-# The next line will be dropped, migrate your board to use a single firmware file
- cp $(KDIR)/$$(IMG_PREFIX)-$(2)-squashfs-ubinized.bin $(BIN_DIR)
- endef
-
- PROFILES_LIST += $(1)
+define Build/sdcard-img-ext4
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ 83 $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.bootimg \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
endef
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-define UBINORProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(call Image/Build/UbinizeImage,$(2),,squashfs, -p $(3) -m 1)
- endef
-
- PROFILES_LIST += $(1)
+define Build/omnia-medkit-initramfs
+ $(TAR) -c -T /dev/null -f $@
+ rm -rf $(dir $(IMAGE_KERNEL))boot
+ mkdir -p $(dir $(IMAGE_KERNEL))boot/boot/
+ cp $(KDIR)/zImage-initramfs $(dir $(IMAGE_KERNEL))boot/boot/zImage
+ cp $(KDIR)/image-$(DEVICE_DTS).dtb $(dir $(IMAGE_KERNEL))boot/boot/dtb
+ $(TAR) -rp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ --file=$@ -C $(dir $(IMAGE_KERNEL))boot/ .
endef
-# $(1): Profile Name
-# $(2): DTB Name
-# $(3): Erase Block Size
-define NORProfile
- define Image/BuildKernel/Profile/$(1)
- $(call Image/Build/DTB,$(2))
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile,$(1)/Initramfs)
- endif
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(call Image/Build/DTB,$(2),-initramfs)
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- ( \
- dd if=$(KDIR)/uImage-$(2) bs=$(3) conv=sync; \
- dd if=$(KDIR)/root.squashfs bs=$(3) conv=sync; \
- ) > $$(BIN_DIR)/$$(IMG_PREFIX)-$(2)-squashfs-firmware.bin
- endef
-
- PROFILES_LIST += $(1)
+define Build/uDPU-firmware
+ (rm -fR $@-fw; mkdir -p $@-fw)
+ $(CP) $(BIN_DIR)/$(IMAGE_PREFIX)-initramfs.itb $@-fw/recovery.itb
+ $(CP) $@-boot.scr $@-fw/boot.scr
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/rootfs.tgz -C $(TARGET_DIR) .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/boot.tgz -C $@.boot .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $(KDIR_TMP)/$(IMAGE_PREFIX)-firmware.tgz -C $@-fw .
endef
-# $(1): Profile Name
-# $(2): Sub Profiles list
-define MultiProfile
- define Image/BuildKernel/Profile/$(1)
- $(foreach profile, $(2),
- $(call Image/BuildKernel/Profile/$(profile)))
- endef
-
- define Image/Build/Profile/$(1)/BuildSysupgrade
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/BuildSysupgrade,$$(1)))
- endef
-
- define Image/Build/Profile/$(1)/Initramfs
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/Initramfs))
- endef
-
- define Image/Build/Profile/$(1)/squashfs
- $(foreach profile, $(2),
- $(call Image/Build/Profile/$(profile)/squashfs))
- endef
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+ DEVICE_DTS_DIR := $(DTS_DIR)
+ BOARD_NAME = $$(DEVICE_DTS)
+ KERNEL_NAME := zImage
+ KERNEL := kernel-bin | append-dtb | uImage none
+ IMAGES := sysupgrade.bin
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
+ UBINIZE_OPTS := -E 5
+ UBOOT :=
+ BOOT_SCRIPT :=
endef
-# Boards with NAND, without subpages
-$(eval $(call NANDProfile,370-DB,armada-370-db,512KiB,4096))
-$(eval $(call NANDProfile,370-RD,armada-370-rd,512KiB,4096))
-$(eval $(call NANDProfile,385-DB-AP,armada-385-db-ap,256KiB,4096))
-$(eval $(call NANDProfile,Mirabox,armada-370-mirabox,512KiB,4096))
-$(eval $(call NANDProfile,XP-DB,armada-xp-db,512KiB,4096))
-$(eval $(call NANDProfile,XP-GP,armada-xp-gp,512KiB,4096))
-
-# Boards with NAND, with subpages
-$(eval $(call NANDProfile,Mamba,armada-xp-mamba,128KiB,2048,512))
-
-# Boards with large NOR, where we want to use UBI
-$(eval $(call UBINORProfile,OpenBlocks-AX-3-4,armada-xp-openblocks-ax3-4,128KiB))
-
-# Boards with small NOR, where UBI doesn't make sense
-$(eval $(call NORProfile,385-RD,armada-385-rd,256KiB))
-
-define Image/Build/Profile/Mamba/squashfs
- $(call Image/Build/UbinizeImage,armada-xp-mamba,,squashfs, -p 128KiB -m 2048 -s 512)
- ( \
- dd if=$(KDIR)/uImage-armada-xp-mamba bs=3072k conv=sync; \
- dd if=$(KDIR)/$(IMG_PREFIX)-armada-xp-mamba-squashfs-ubinized.bin \
- bs=2048 conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-armada-xp-mamba-squashfs-factory.img
+define Device/Default-arm64
+ BOOT_SCRIPT := generic-arm64
+ DEVICE_DTS_DIR := $(DTS_DIR)/marvell
+ IMAGES := sdcard.img.gz
+ IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+ KERNEL_NAME := Image
+ KERNEL := kernel-bin
endef
-# The Default profile should build everything
-$(eval $(call MultiProfile,Default,$(PROFILES_LIST)))
+define Device/NAND-128K
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+endef
-define Image/BuildKernel
- $(call Image/BuildKernel/Profile/$(PROFILE))
+define Device/NAND-256K
+ BLOCKSIZE := 256k
+ PAGESIZE := 4096
endef
-define Image/Build/squashfs
- # Align the squashfs image size before calling the profiles,
- # otherwise the size would keep growing
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- $(call Image/Build/Profile/$(PROFILE)/squashfs)
+define Device/NAND-512K
+ BLOCKSIZE := 512k
+ PAGESIZE := 4096
endef
-define Image/Build
- $(call Image/Build/$(1))
-# The next line will be dropped, migrate your board to use a single firmware file
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
- $(call Image/Build/Profile/$(PROFILE)/BuildSysupgrade,$(1))
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call Image/Build/Profile/$(PROFILE)/Initramfs)
+ifeq ($(SUBTARGET),cortexa9)
+include cortexa9.mk
+endif
+
+ifeq ($(SUBTARGET),cortexa53)
+include cortexa53.mk
+endif
+
+ifeq ($(SUBTARGET),cortexa72)
+include cortexa72.mk
endif
-endef
$(eval $(call BuildImage))
projects / oweals / openwrt.git / blobdiff