# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-NAND_BLOCKSIZE := 2048:128k
-
-define sanitize_profile_name
-$(shell echo $(PROFILE) | tr '[:upper:]' '[:lower:]')
+KERNEL_LOADADDR:=0x8000
+
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS = $$(if $$(BOARD_NAME),kirkwood-$$(BOARD_NAME),)
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL := kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL_IN_UBI := 1
+
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ BLOCKSIZE := 128k
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-ubi
+ SUPPORTED_DEVICES = $(subst _,$(comma),$(1)) $$(BOARD_NAME)
endef
-define Image/BuildKernel/Template
-
- $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
- echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-zImage, \
- $(BIN_DIR)/$(IMG_PREFIX)-uImage \
- )
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
- echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs, \
- $(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs \
- )
- endif
-
- ifneq ($(1),)
- $(CP) $(LINUX_DIR)/arch/arm/boot/dts/kirkwood-$(1).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb
-
- $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
- cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage \
- )
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
- cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage-initramfs \
- )
- endif
- endif
+define Device/cisco_on100
+ DEVICE_VENDOR := Cisco Systems
+ DEVICE_MODEL := ON100
+ KERNEL_SIZE := 5376k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ BOARD_NAME := on100
+ DEVICE_PACKAGES := kmod-mvsdio
endef
+TARGET_DEVICES += cisco_on100
-define Image/InstallKernel/Template
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_UIMAGE),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/uImage
- endif
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_ZIMAGE),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage
- endif
- endif
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),)
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- ifneq ($(1),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/$(1).dtb
- endif
- endif
+define Device/cloudengines_pogoe02
+ DEVICE_VENDOR := Cloud Engines
+ DEVICE_MODEL := Pogoplug E02
+ BOARD_NAME := pogo_e02
endef
+TARGET_DEVICES += cloudengines_pogoe02
-define Image/Build/jffs2-nand-2048-128k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
- bs=2048 conv=sync
+define Device/cloudengines_pogoplugv4
+ DEVICE_VENDOR := Cloud Engines
+ DEVICE_MODEL := Pogoplug V4
+ DEVICE_DTS := kirkwood-pogoplug-series-4
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3
endef
+TARGET_DEVICES += cloudengines_pogoplugv4
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- ( \
- dd if=$(KDIR)/zImage bs=4096k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img
+define Device/iom_iconnect-1.1
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := Iconnect
+ BOARD_NAME := iconnect
endef
-
-define Image/mkfs/targz
-
- $(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+TARGET_DEVICES += iom_iconnect-1.1
+
+define Device/iom_ix2-200
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := StorCenter ix2-200
+ DEVICE_DTS := kirkwood-iomega_ix2_200
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-lm63
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 3072k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := 31744k
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
endef
-
-define Image/Build/ubifs
-
- ifneq ($($(PROFILE)_UBIFS_OPTS),)
- $(CP) $(KDIR)/root.ubifs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubifs
- endif
+TARGET_DEVICES += iom_ix2-200
+
+define Device/linksys_audi
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA3500 (Audi)
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 2624k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ BOARD_NAME := linksys-audi
+ DEFAULT := n
endef
-
-define Image/Build/ubi
-
- ifneq ($($(PROFILE)_UBI_OPTS),)
- $(CP) $(KDIR)/root.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubi
- endif
+TARGET_DEVICES += linksys_audi
+
+define Device/linksys_viper
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E4200v2 / EA4500 (Viper)
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
+ KERNEL_SIZE := 2688k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ BOARD_NAME := linksys-viper
endef
+TARGET_DEVICES += linksys_viper
-Image/BuildKernel/Template/Generic=$(call Image/BuildKernel/Template)
-Image/InstallKernel/Template/Generic=$(call Image/InstallKernel/Template)
-
-Image/BuildKernel/Template/DOCKSTAR=$(call Image/BuildKernel/Template,dockstar)
-Image/InstallKernel/Template/DOCKSTAR=$(call Image/InstallKernel/Template,dockstar)
-
-Image/BuildKernel/Template/IB62X0=$(call Image/BuildKernel/Template,ib62x0)
-Image/InstallKernel/Template/IB62X0=$(call Image/InstallKernel/Template,ib62x0)
-
-Image/BuildKernel/Template/ICONNECT=$(call Image/BuildKernel/Template,iconnect)
-Image/InstallKernel/Template/ICONNECT=$(call Image/InstallKernel/Template,iconnect)
-
-Image/BuildKernel/Template/POGOE02=$(call Image/BuildKernel/Template,pogo_e02)
-Image/InstallKernel/Template/POGOE02=$(call Image/InstallKernel/Template,pogo_e02)
+define Device/raidsonic_ib-nas62x0
+ DEVICE_VENDOR := RaidSonic
+ DEVICE_MODEL := ICY BOX IB-NAS62x0
+ BOARD_NAME := ib62x0
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
+endef
+TARGET_DEVICES += raidsonic_ib-nas62x0
-define Image/BuildKernel
- $(call Image/BuildKernel/Template/$(PROFILE))
+define Device/seagate_dockstar
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := FreeAgent Dockstar
+ BOARD_NAME := dockstar
endef
+TARGET_DEVICES += seagate_dockstar
-define Image/InstallKernel
- $(call Image/InstallKernel/Template/$(PROFILE))
+define Device/seagate_goflexnet
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := GoFlexNet
+ BOARD_NAME := goflexnet
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
endef
+TARGET_DEVICES += seagate_goflexnet
-define Image/Build
- $(if $(Image/Build/$(1)), \
- $(call Image/Build/$(1),$(1)), \
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
- )
+define Device/seagate_goflexhome
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := GoFlexHome
+ BOARD_NAME := goflexhome
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
+endef
+TARGET_DEVICES += seagate_goflexhome
+
+define Device/zyxel_nsa310b
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NSA310b
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-lm85
+ BOARD_NAME := nsa310b
+endef
+TARGET_DEVICES += zyxel_nsa310b
+
+define Device/zyxel_nsa325
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NSA325
+ DEVICE_VARIANT := v1/v2
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
+ BOARD_NAME := nsa325
endef
+TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
projects / oweals / openwrt.git / blobdiff