igmpproxy: remove some bashism

[oweals/openwrt.git] / target / linux / ipq40xx / files-4.19 / arch / arm / boot / dts / qcom-ipq4029-ap-303.dts

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
index 24e5dc2809afc14556f28cdaab4b2e50384963b4..126d944ebb8de3973cb62248b4483634b18814f2 100644 (file)
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0 OR MIT
 
-#include "qcom-ipq4019.dtsi"
+#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
        model = "Aruba AP-303";
@@ -16,89 +14,6 @@
                led-upgrade = &led_system_red;
        };
 
-       memory {
-               device_type = "memory";
-               reg = <0x80000000 0x10000000>;
-       };
-
-       soc {
-               rng@22000 {
-                       status = "okay";
-               };
-
-               mdio@90000 {
-                       status = "okay";
-                       pinctrl-0 = <&mdio_pins>;
-                       pinctrl-names = "default";
-
-                       /delete-node/ ethernet-phy@0;
-                       /delete-node/ ethernet-phy@2;
-                       /delete-node/ ethernet-phy@3;
-                       /delete-node/ ethernet-phy@4;
-
-                       ethernet-phy@5 {
-                               reg = <0x5>;
-                       };
-               };
-
-               counter@4a1000 {
-                       compatible = "qcom,qca-gcnt";
-                       reg = <0x4a1000 0x4>;
-               };
-
-               ess_tcsr@1953000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1953000 0x1000>;
-                       qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
-               };
-
-               tcsr@1949000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1949000 0x100>;
-                       qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-               };
-
-               tcsr@1957000 {
-                       compatible = "qcom,tcsr";
-                       reg = <0x1957000 0x100>;
-                       qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-               };
-
-               crypto@8e3a000 {
-                       status = "okay";
-               };
-
-               watchdog@b017000 {
-                       status = "okay";
-               };
-
-               ess-switch@c000000 {
-                       switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
-                       switch_lan_bmp = <0x0>; /* lan port bitmap */
-                       switch_wan_bmp = <0x10>; /* wan port bitmap */
-               };
-
-               edma@c080000 {
-                       qcom,single-phy;
-                       qcom,num_gmac = <1>;
-                       phy-mode = "rgmii-id";
-                       status = "okay";
-               };
-
-               i2c_0: i2c@78b7000 {
-                       pinctrl-0 = <&i2c_0_pins>;
-                       pinctrl-names = "default";
-                       status = "ok";
-
-                       tpm@29 {
-                               /* No Driver */
-                               compatible = "atmel,at97sc3203";
-                               reg = <0x29>;
-                               read-only;
-                       };
-               };
-       };
-
        leds {
                compatible = "gpio-leds";
 
@@ -124,47 +39,6 @@
                        gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset button";
-                       gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&blsp_dma {
-       status = "okay";
-};
-
-&blsp1_uart1 {
-       /* Texas Instruments CC2540T BLE radio */
-       pinctrl-0 = <&serial_0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&blsp1_uart2 {
-       pinctrl-0 = <&serial_1_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-};
-
-&cryptobam {
-       status = "okay";
-};
-
-&gmac0 {
-       qcom,phy_mdio_addr = <5>;
-       qcom,poll_required = <1>;
-       vlan_tag = <0 0x20>;
-};
-
-&qpic_bam {
-       status = "okay";
 };
 
 &tlmm {
@@ -176,76 +50,6 @@
         * 43 - out - active low to reset BLE radio
         * 19 - in  - active high when DC powered
         */
-       mdio_pins: mdio_pinmux {
-               mux_1 {
-                       pins = "gpio6";
-                       function = "mdio";
-                       bias-pull-up;
-               };
-               mux_2 {
-                       pins = "gpio7";
-                       function = "mdc";
-                       bias-pull-up;
-               };
-       };
-
-       nand_pins: nand_pins {
-               pullups {
-                       pins = "gpio53", "gpio58", "gpio59";
-                       function = "qpic";
-                       bias-pull-up;
-               };
-
-               pulldowns {
-                       pins = "gpio54", "gpio55", "gpio56",
-                               "gpio57", "gpio60", "gpio61",
-                               "gpio62", "gpio63", "gpio64",
-                               "gpio65", "gpio66", "gpio67",
-                               "gpio68", "gpio69";
-                       function = "qpic";
-                       bias-pull-down;
-               };
-       };
-
-       spi_0_pins: spi_0_pinmux {
-               pin {
-                       function = "blsp_spi0";
-                       pins = "gpio13", "gpio14", "gpio15";
-                       drive-strength = <12>;
-                       bias-disable;
-               };
-               pin_cs {
-                       function = "gpio";
-                       pins = "gpio12";
-                       drive-strength = <2>;
-                       bias-disable;
-                       output-high;
-               };
-       };
-       i2c_0_pins: i2c_0_pinmux {
-               mux {
-                       pins = "gpio10", "gpio11";
-                       function = "blsp_i2c0";
-                       drive-strength = <4>;
-                       bias-disable;
-               };
-       };
-
-       serial_0_pins: serial_0_pinmux {
-               mux {
-                       pins = "gpio16", "gpio17";
-                       function = "blsp_uart0";
-                       bias-disable;
-               };
-       };
-
-       serial_1_pins: serial_1_pinmux {
-               mux {
-                       pins = "gpio8", "gpio9";
-                       function = "blsp_uart1";
-                       bias-disable;
-               };
-       };
 
        phy-reset {
                line-name = "PHY-reset";
@@ -255,39 +59,6 @@
        };
 };
 
-&nand {
-       pinctrl-0 = <&nand_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-
-       nand@0 {
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               /* 'aos0' in Aruba firmware */
-                               label = "aos0";
-                               reg = <0x0 0x2000000>;
-                               read-only;
-                       };
-
-                       partition@2000000 {
-                               /* 'aos1' in AVM firmware */
-                               label = "ubi";
-                               reg = <0x2000000 0x2000000>;
-                       };
-
-                       partition@4000000 {
-                               label = "aruba-ubifs";
-                               reg = <0x4000000 0x4000000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
 &blsp1_spi1 {
        pinctrl-0 = <&spi_0_pins>;
        pinctrl-names = "default";
@@ -407,13 +178,3 @@
                };
        };
 };
-
-&wifi0 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
-       status = "okay";
-       qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};