+++ /dev/null
-// SPDX-License-Identifier: ISC
-// Copyright (c) 2015, The Linux Foundation. All rights reserved.
-// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
-// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Cell C RTL30VW";
- compatible = "cellc,rtl30vw";
-
- aliases {
- led-boot = &led_power_blue;
- led-failsafe = &led_power_red;
- led-running = &led_power_blue;
- led-upgrade = &led_power_red;
- };
-
- chosen {
- bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- num-chipselects = <1>;
-
- mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <2>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_blue: power_blue {
- gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:power";
- default-state = "on";
- };
-
- led_power_red: power_red {
- gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:power";
- };
-
- tp28 {
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp28";
- default-state = "keep";
- };
-
- tp27 {
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp27";
- default-state = "keep";
- };
-
- wlan2g {
- gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan2g";
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan5g";
- linux,default-trigger = "phy1tpt";
- };
-
- wps {
- gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wps";
- };
-
- voip {
- gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:voip";
- };
-
- s1 {
- gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s1";
- };
-
- s2 {
- gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s2";
- };
-
- s3 {
- gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s3";
- };
-
- s4 {
- gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s4";
- };
-
- signal {
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:signal";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /*"n25q128a11" is required for proper nand recognition in u-boot. */
- compatible = "jedec,spi-nor", "n25q128a11";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:BOOTCONFIG";
- reg = <0x180000 0x10000>;
- read-only;
- };
- };
- };
-
- flash@1 {
- /*
- * Factory U-boot looks in 0:BOOTCONFIG partition for active
- * partitions settings and mangle partition config. So kernel
- * /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
- * It isn't a problem but we never can be sure where OFW put
- * factory images. "spinand,mt29f" value is required for proper
- * nand recognition in u-boot.
- */
- compatible = "spi-nand","spinand,mt29f";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x2000000>;
- };
-
- partition@2400000 {
- label = "kernel_1";
- reg = <0x2400000 0x400000>;
- };
-
- partition@2800000 {
- label = "rootfs_1";
- reg = <0x2800000 0x2000000>;
- };
-
- partition@4800000 {
- label = "ubifs";
- reg = <0x4800000 0x3800000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
projects / oweals / openwrt.git / blobdiff