brcm63xx: switch to new partition layout specification

[oweals/openwrt.git] / target / linux / brcm63xx / dts / r5010unv2.dts

diff --git a/target/linux/brcm63xx/dts/r5010unv2.dts b/target/linux/brcm63xx/dts/r5010unv2.dts
index 0d91d845207e1977098fa822020259e27e44cbd0..221b4213e65249282afbabe32ab6536d047952db 100644 (file)
--- a/target/linux/brcm63xx/dts/r5010unv2.dts
+++ b/target/linux/brcm63xx/dts/r5010unv2.dts
@@ -10,6 +10,7 @@
 
        chosen {
                bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
        };
 
        
@@ -22,12 +23,12 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 23 1>;
+                       gpios = <&pinctrl 23 1>;
                        linux,code = <KEY_RESTART>;
                };
                wps {
                        label = "wps";
-                       gpios = <&gpio0 24 1>;
+                       gpios = <&pinctrl 24 1>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
@@ -37,33 +38,76 @@
 
                inet_green {
                        label = "R5010UNv2:green:inet";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&pinctrl 1 1>;
                };
                inet_fail_red {
                        label = "R5010UNv2:red:inet-fail";
-                       gpios = <&gpio0 2 1>;
+                       gpios = <&pinctrl 2 1>;
                };
                dsl_red {
                        label = "R5010UNv2:green:dsl";
-                       gpios = <&gpio0 3 1>;
+                       gpios = <&pinctrl 3 1>;
                };
                power_green {
                        label = "R5010UNv2:green:power";
-                       gpios = <&gpio0 4 1>;
+                       gpios = <&pinctrl 4 1>;
                        default-state = "on";
                };
                power_fail_red {
                        label = "R5010UNv2:red:power-fail";
-                       gpios = <&gpio0 5 1>;
+                       gpios = <&pinctrl 5 1>;
                };
                wps_green {
                        label = "R5010UNv2:green:wps";
-                       gpios = <&gpio0 10 1>;
+                       gpios = <&pinctrl 10 1>;
                };
                usb_green {
                        label = "R5010UNv2:green:usb";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&pinctrl 11 1>;
                };
        };
 };
 
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               linux,part-probe = "bcm63xxpart";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+                       cfe@0 {
+                               reg = <0x000000 0x010000>;
+                               label = "cfe";
+                               read-only;
+                       };
+
+                       linux@10000 {
+                               reg = <0x010000 0x7e0000>;
+                               label = "linux";
+                               compatible = "brcm,bcm963xx-imagetag";
+                       };
+
+                       nvram@7f0000 {
+                               reg = <0x7f0000 0x010000>;
+                               label = "nvram";
+                       };
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};