ath79: add support for Compex WPJ531 (16M)

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9531_compex_wpj531-16m.dts

diff --git a/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts b/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
new file mode 100644 (file)
index 0000000..343a02e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_compex_wpj531-16m.dts
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+       compatible = "compex,wpj531-16m", "qca,qca9531";
+       model = "Compex WPJ531 (16MB flash)";
+
+       aliases {
+               label-mac-device = &eth0;
+               led-boot = &led_sig4;
+               led-failsafe = &led_sig4;
+               led-running = &led_sig4;
+               led-upgrade = &led_sig4;
+       };
+
+       beeper {
+               compatible = "gpio-beeper";
+               gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinmux_led_eth_pins>;
+
+               sig1 {
+                       label = "wpj531:red:sig1";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               sig2 {
+                       label = "wpj531:yellow:sig2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               sig3 {
+                       label = "wpj531:green:sig3";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               led_sig4: sig4 {
+                       label = "wpj531:green:sig4";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&pinmux {
+       pinmux_led_eth_pins: pinmux_led_eth_pins {
+               pinctrl-single,bits = <0x8 0x2b000000 0xff000000>, <0xc 0x00002d00 0x0000ff00>;
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "firmware";
+                               reg = <0x030000 0xfc0000>;
+                               compatible = "denx,uimage";
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth1 {
+       mtd-mac-address = <&uboot 0x2e018>;
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&swphy4>;
+
+       mtd-mac-address = <&uboot 0x2e010>;
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "pci168c,003c";
+               reg = <0x0000 0 0 0 0>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};