// SPDX-License-Identifier: GPL-2.0 OR MIT #include "qcom-ipq4019.dtsi" #include #include #include / { model = "EZVIZ CS-W3-WD1200G EUP"; compatible = "ezviz,cs-w3-wd1200g-eup"; aliases { led-boot = &led_status_green; led-failsafe = &led_status_red; led-running = &led_status_blue; led-upgrade = &led_status_green; }; soc { rng@22000 { status = "okay"; }; mdio@90000 { status = "okay"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; reset-delay-us = <5000>; }; ess-psgmii@98000 { status = "okay"; }; tcsr@1949000 { compatible = "qcom,tcsr"; reg = <0x1949000 0x100>; qcom,wifi_glb_cfg = ; }; tcsr@194b000 { compatible = "qcom,tcsr"; reg = <0x194b000 0x100>; qcom,usb-hsphy-mode-select = ; }; ess_tcsr@1953000 { compatible = "qcom,tcsr"; reg = <0x1953000 0x1000>; qcom,ess-interface-select = ; }; tcsr@1957000 { compatible = "qcom,tcsr"; reg = <0x1957000 0x100>; qcom,wifi_noc_memtype_m0_m2 = ; }; crypto@8e3a000 { status = "okay"; }; watchdog@b017000 { status = "okay"; }; ess-switch@c000000 { status = "okay"; }; edma@c080000 { status = "okay"; }; }; leds { compatible = "gpio-leds"; led_status_red: status_red { label = "cs-w3-wd1200g-eup:red:status"; gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; }; led_status_green: status_green { label = "cs-w3-wd1200g-eup:green:status"; gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; }; led_status_blue: status_blue { label = "cs-w3-wd1200g-eup:blue:status"; gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &tlmm { serial_pins: serial_pinmux { mux { pins = "gpio60", "gpio61"; function = "blsp_uart0"; bias-disable; }; }; mdio_pins: mdio_pinmux { mux_1 { pins = "gpio53"; function = "mdio"; bias-pull-up; }; mux_2 { pins = "gpio52"; function = "mdc"; bias-pull-up; }; }; spi_0_pins: spi_0_pinmux { pin { function = "blsp_spi0"; pins = "gpio55", "gpio56", "gpio57"; drive-strength = <12>; bias-disable; }; pin_cs { function = "gpio"; pins = "gpio54"; drive-strength = <2>; bias-disable; output-high; }; }; }; &blsp_dma { status = "okay"; }; &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition0@0 { label = "SBL1"; reg = <0x00000000 0x00040000>; read-only; }; partition1@40000 { label = "MIBIB"; reg = <0x00040000 0x00020000>; read-only; }; partition2@60000 { label = "QSEE"; reg = <0x00060000 0x00060000>; read-only; }; partition3@c0000 { label = "CDT"; reg = <0x000c0000 0x00010000>; read-only; }; partition4@d0000 { label = "DDRPARAMS"; reg = <0x000d0000 0x00010000>; read-only; }; partition5@E0000 { label = "APPSBLENV"; reg = <0x000e0000 0x00010000>; read-only; }; partition6@F0000 { label = "APPSBL"; reg = <0x000f0000 0x00080000>; read-only; }; partition7@170000 { label = "ART"; reg = <0x00170000 0x00010000>; read-only; }; partition9@580000 { compatible = "denx,fit"; label = "firmware"; reg = <0x00180000 0x00e80000>; }; }; }; }; &blsp1_uart1 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; status = "okay"; }; &cryptobam { status = "okay"; }; &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; };