target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "EnGenius EMD1";
  10         compatible = "engenius,emd1";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                 };
  27
  28                 ess-psgmii@98000 {
  29                         status = "okay";
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 ess_tcsr@1953000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x1953000 0x1000>;
  41                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  42                 };
  43
  44                 tcsr@1957000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1957000 0x100>;
  47                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  48                 };
  49
  50                 crypto@8e3a000 {
  51                         status = "okay";
  52                 };
  53
  54                 watchdog@b017000 {
  55                         status = "okay";
  56                 };
  57
  58                 ess-switch@c000000 {
  59                         status = "okay";
  60                         switch_lan_bmp = <0x20>;
  61                         switch_wan_bmp = <0x00>;
  62                 };
  63
  64                 edma@c080000 {
  65                         status = "okay";
  66                         qcom,num_gmac = <1>;
  67                 };
  68         };
  69
  70         keys {
  71                 compatible = "gpio-keys";
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_RESTART>;
  77                 };
  78         };
  79
  80         leds {
  81                 compatible = "gpio-leds";
  82
  83                 led_power: power {
  84                         label = "emd1:white:power";
  85                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 wlan2g {
  89                         label = "emd1:red:wlan2g";
  90                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  91                         linux,default-trigger = "phy0tpt";
  92                 };
  93
  94                 wlan5g {
  95                         label = "emd1:blue:wlan5g";
  96                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
  97                         linux,default-trigger = "phy1tpt";
  98                 };
  99
 100                 mesh {
 101                         label = "emd1:orange:mesh";
 102                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 103                 };
 104         };
 105 };
 106
 107 &tlmm {
 108         serial_pins: serial_pinmux {
 109                 mux {
 110                         pins = "gpio60", "gpio61";
 111                         function = "blsp_uart0";
 112                         bias-disable;
 113                 };
 114         };
 115
 116         spi_0_pins: spi_0_pinmux {
 117                 pin {
 118                         function = "blsp_spi0";
 119                         pins = "gpio54", "gpio55", "gpio56", "gpio57";
 120                         drive-strength = <12>;
 121                         bias-disable;
 122                 };
 123
 124                 pin_cs {
 125                         function = "gpio";
 126                         pins = "gpio54";
 127                         drive-strength = <2>;
 128                         bias-disable;
 129                         output-high;
 130                 };
 131         };
 132 };
 133
 134 &blsp_dma {
 135         status = "okay";
 136 };
 137
 138 &blsp1_spi1 {
 139         pinctrl-0 = <&spi_0_pins>;
 140         pinctrl-names = "default";
 141         status = "okay";
 142         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 143
 144         flash@0 {
 145                 compatible = "jedec,spi-nor";
 146                 reg = <0>;
 147                 spi-max-frequency = <24000000>;
 148                 partitions {
 149                         compatible = "fixed-partitions";
 150                         #address-cells = <1>;
 151                         #size-cells = <1>;
 152
 153                         partition0@0 {
 154                                 label = "0:SBL1";
 155                                 reg = <0x00000000 0x00040000>;
 156                                 read-only;
 157                         };
 158                         partition1@40000 {
 159                                 label = "0:MIBIB";
 160                                 reg = <0x00040000 0x00020000>;
 161                                 read-only;
 162                         };
 163                         partition2@60000 {
 164                                 label = "0:QSEE";
 165                                 reg = <0x00060000 0x00060000>;
 166                                 read-only;
 167                         };
 168                         partition3@c0000 {
 169                                 label = "0:CDT";
 170                                 reg = <0x000c0000 0x00010000>;
 171                                 read-only;
 172                         };
 173                         partition4@d0000 {
 174                                 label = "0:DDRPARAMS";
 175                                 reg = <0x000d0000 0x00010000>;
 176                                 read-only;
 177                         };
 178                         partition5@e0000 {
 179                                 label = "0:APPSBLENV";
 180                                 reg = <0x000e0000 0x00010000>;
 181                                 read-only;
 182                         };
 183                         partition6@f0000 {
 184                                 label = "0:APPSBL";
 185                                 reg = <0x000f0000 0x00080000>;
 186                                 read-only;
 187                         };
 188                         partition7@170000 {
 189                                 label = "0:ART";
 190                                 reg = <0x00170000 0x00010000>;
 191                                 read-only;
 192                         };
 193                         partition8@180000 {
 194                                 label = "userconfig";
 195                                 reg = <0x00180000 0x00080000>;
 196                                 read-only;
 197                         };
 198                         partition9@200000 {
 199                                 compatible = "denx,fit";
 200                                 label = "firmware";
 201                                 reg = <0x200000 0x01e00000>;
 202                         };
 203                 };
 204         };
 205 };
 206
 207 &blsp1_uart1 {
 208         pinctrl-0 = <&serial_pins>;
 209         pinctrl-names = "default";
 210         status = "okay";
 211 };
 212
 213 &gmac0 {
 214         qcom,phy_mdio_addr = <4>;
 215         qcom,poll_required = <1>;
 216         qcom,forced_speed = <1000>;
 217         qcom,forced_duplex = <1>;
 218         vlan_tag = <1 0x20>;
 219 };
 220
 221 &cryptobam {
 222         status = "okay";
 223 };
 224
 225 &wifi0 {
 226         status = "okay";
 227         qcom,ath10k-calibration-variant = "EnGenius-EMD1";
 228 };
 229
 230 &wifi1 {
 231         status = "okay";
 232         qcom,ath10k-calibration-variant = "EnGenius-EMD1";
 233 };