target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "EZVIZ CS-W3-WD1200G EUP";
  10         compatible = "ezviz,cs-w3-wd1200g-eup";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_red;
  15                 led-running = &led_status_blue;
  16                 led-upgrade = &led_status_green;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                         pinctrl-0 = <&mdio_pins>;
  27                         pinctrl-names = "default";
  28                         reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
  29                         reset-delay-us = <5000>;
  30                 };
  31
  32                 ess-psgmii@98000 {
  33                         status = "okay";
  34                 };
  35
  36                 tcsr@1949000 {
  37                         compatible = "qcom,tcsr";
  38                         reg = <0x1949000 0x100>;
  39                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  40                 };
  41
  42                 tcsr@194b000 {
  43                         compatible = "qcom,tcsr";
  44                         reg = <0x194b000 0x100>;
  45                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  46                 };
  47
  48                 ess_tcsr@1953000 {
  49                         compatible = "qcom,tcsr";
  50                         reg = <0x1953000 0x1000>;
  51                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  52                 };
  53
  54                 tcsr@1957000 {
  55                         compatible = "qcom,tcsr";
  56                         reg = <0x1957000 0x100>;
  57                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  58                 };
  59
  60                 crypto@8e3a000 {
  61                         status = "okay";
  62                 };
  63
  64                 watchdog@b017000 {
  65                         status = "okay";
  66                 };
  67
  68                 ess-switch@c000000 {
  69                         status = "okay";
  70                 };
  71
  72                 edma@c080000 {
  73                         status = "okay";
  74                 };
  75         };
  76
  77         leds {
  78                 compatible = "gpio-leds";
  79
  80                 led_status_red: status_red {
  81                         label = "cs-w3-wd1200g-eup:red:status";
  82                         gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 led_status_green: status_green {
  86                         label = "cs-w3-wd1200g-eup:green:status";
  87                         gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 led_status_blue: status_blue {
  91                         label = "cs-w3-wd1200g-eup:blue:status";
  92                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         keys {
  97                 compatible = "gpio-keys";
  98
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                 };
 104         };
 105 };
 106
 107 &tlmm {
 108         serial_pins: serial_pinmux {
 109                 mux {
 110                         pins = "gpio60", "gpio61";
 111                         function = "blsp_uart0";
 112                         bias-disable;
 113                 };
 114         };
 115
 116         mdio_pins: mdio_pinmux {
 117                 mux_1 {
 118                         pins = "gpio53";
 119                         function = "mdio";
 120                         bias-pull-up;
 121                 };
 122
 123                 mux_2 {
 124                         pins = "gpio52";
 125                         function = "mdc";
 126                         bias-pull-up;
 127                 };
 128         };
 129
 130         spi_0_pins: spi_0_pinmux {
 131                 pin {
 132                         function = "blsp_spi0";
 133                         pins = "gpio55", "gpio56", "gpio57";
 134                         drive-strength = <12>;
 135                         bias-disable;
 136                 };
 137                 pin_cs {
 138                         function = "gpio";
 139                         pins = "gpio54";
 140                         drive-strength = <2>;
 141                         bias-disable;
 142                         output-high;
 143                 };
 144         };
 145 };
 146
 147 &blsp_dma {
 148         status = "okay";
 149 };
 150
 151 &blsp1_spi1 {
 152         pinctrl-0 = <&spi_0_pins>;
 153         pinctrl-names = "default";
 154         status = "okay";
 155         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 156
 157         flash@0 {
 158                 compatible = "jedec,spi-nor";
 159                 reg = <0>;
 160                 spi-max-frequency = <24000000>;
 161
 162                 partitions {
 163                         compatible = "fixed-partitions";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166
 167                         partition0@0 {
 168                                 label = "SBL1";
 169                                 reg = <0x00000000 0x00040000>;
 170                                 read-only;
 171                         };
 172
 173                         partition1@40000 {
 174                                 label = "MIBIB";
 175                                 reg = <0x00040000 0x00020000>;
 176                                 read-only;
 177                         };
 178
 179                         partition2@60000 {
 180                                 label = "QSEE";
 181                                 reg = <0x00060000 0x00060000>;
 182                                 read-only;
 183                         };
 184
 185                         partition3@c0000 {
 186                                 label = "CDT";
 187                                 reg = <0x000c0000 0x00010000>;
 188                                 read-only;
 189                         };
 190
 191                         partition4@d0000 {
 192                                 label = "DDRPARAMS";
 193                                 reg = <0x000d0000 0x00010000>;
 194                                 read-only;
 195                         };
 196
 197                         partition5@E0000 {
 198                                 label = "APPSBLENV";
 199                                 reg = <0x000e0000 0x00010000>;
 200                                 read-only;
 201                         };
 202
 203                         partition6@F0000 {
 204                                 label = "APPSBL";
 205                                 reg = <0x000f0000 0x00080000>;
 206                                 read-only;
 207                         };
 208
 209                         partition7@170000 {
 210                                 label = "ART";
 211                                 reg = <0x00170000 0x00010000>;
 212                                 read-only;
 213                         };
 214
 215                         partition9@580000 {
 216                                 compatible = "denx,fit";
 217                                 label = "firmware";
 218                                 reg = <0x00180000 0x00e80000>;
 219                         };
 220                 };
 221         };
 222 };
 223
 224 &blsp1_uart1 {
 225         pinctrl-0 = <&serial_pins>;
 226         pinctrl-names = "default";
 227         status = "okay";
 228 };
 229
 230 &cryptobam {
 231         status = "okay";
 232 };
 233
 234 &wifi0 {
 235         status = "okay";
 236         qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
 237 };
 238
 239 &wifi1 {
 240         status = "okay";
 241         qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
 242 };