target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Repeater 3000";
  10         compatible = "avm,fritzrepeater-3000";
  11
  12         aliases {
  13                 led-boot = &power_led;
  14                 led-failsafe = &power_led;
  15                 led-running = &power_led;
  16                 led-upgrade = &power_led;
  17         };
  18
  19         soc {
  20                 rng@22000 {
  21                         status = "okay";
  22                 };
  23
  24                 mdio@90000 {
  25                         status = "okay";
  26                 };
  27
  28                 ess-psgmii@98000 {
  29                         status = "okay";
  30                 };
  31
  32                 tcsr@1949000 {
  33                         compatible = "qcom,tcsr";
  34                         reg = <0x1949000 0x100>;
  35                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  36                 };
  37
  38                 ess_tcsr@1953000 {
  39                         compatible = "qcom,tcsr";
  40                         reg = <0x1953000 0x1000>;
  41                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  42                 };
  43
  44                 tcsr@1957000 {
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x1957000 0x100>;
  47                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  48                 };
  49
  50                 crypto@8e3a000 {
  51                         status = "okay";
  52                 };
  53
  54                 watchdog@b017000 {
  55                         status = "okay";
  56                 };
  57
  58                 ess-switch@c000000 {
  59                         status = "okay";
  60
  61                         switch_lan_bmp = <0x10>;
  62                         switch_wan_bmp = <0x20>;
  63                 };
  64
  65                 edma@c080000 {
  66                         status = "okay";
  67                 };
  68         };
  69
  70         key {
  71                 compatible = "gpio-keys";
  72
  73                 connect {
  74                         label = "Connect";
  75                         gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                 };
  78         };
  79
  80         leds {
  81                 compatible = "gpio-leds";
  82
  83                 connect_red {
  84                         label = "fritzwlan-3000:red:connect";
  85                         gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 connect_green {
  89                         label = "fritzwlan-3000:green:connect";
  90                         gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 connect_blue {
  94                         label = "fritzwlan-3000:blue:connect";
  95                         gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
  96                 };
  97
  98                 power_led: power {
  99                         label = "fritzwlan-3000:green:power";
 100                         gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
 101                 };
 102         };
 103 };
 104
 105 &tlmm {
 106         serial_0_pins: serial_pinmux {
 107                 mux {
 108                         pins = "gpio16", "gpio17";
 109                         function = "blsp_uart0";
 110                         bias-disable;
 111                 };
 112         };
 113
 114         nand_pins: nand_pins {
 115                 pullups {
 116                         pins = "gpio53", "gpio58", "gpio59";
 117                         function = "qpic";
 118                         bias-pull-up;
 119                 };
 120
 121                 pulldowns {
 122                         pins = "gpio54", "gpio55", "gpio56",
 123                                 "gpio57", "gpio60", "gpio61",
 124                                 "gpio62", "gpio63", "gpio64",
 125                                 "gpio65", "gpio66", "gpio67",
 126                                 "gpio68", "gpio69";
 127                         function = "qpic";
 128                         bias-pull-down;
 129                 };
 130         };
 131 };
 132
 133 &nand {
 134         pinctrl-0 = <&nand_pins>;
 135         pinctrl-names = "default";
 136         status = "okay";
 137
 138         nand@0 {
 139                 partitions {
 140                         compatible = "fixed-partitions";
 141                         #address-cells = <1>;
 142                         #size-cells = <1>;
 143
 144                         partition@0 {
 145                                 label = "SBL1";
 146                                 reg = <0x000000 0x80000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@80000 {
 151                                 label = "MIBIB";
 152                                 reg = <0x080000 0x80000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@100000 {
 157                                 label = "QSEE";
 158                                 reg = <0x100000 0x80000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@180000 {
 163                                 label = "CDT";
 164                                 reg = <0x180000 0x40000>;
 165                                 read-only;
 166                         };
 167
 168                         partition@1c0000 {
 169                                 label = "QSEE_B";
 170                                 reg = <0x1c0000 0x80000>;
 171                                 read-only;
 172                         };
 173
 174                         partition@240000 {
 175                                 label = "urlader0";
 176                                 reg = <0x240000 0x40000>;
 177                                 read-only;
 178                         };
 179
 180                         partition@280000 {
 181                                 label = "urlader1";
 182                                 reg = <0x280000 0x40000>;
 183                                 read-only;
 184                         };
 185
 186                         partition@2c0000 {
 187                                 label = "nand-tffs";
 188                                 reg = <0x2c0000 0x840000>;
 189                                 read-only;
 190                         };
 191
 192                         partition@b00000 {
 193                                 /* 'kernel1' in AVM firmware */
 194                                 label = "uboot0";
 195                                 reg = <0xb00000 0x400000>;
 196                         };
 197
 198                         partition@f00000 {
 199                                 /* 'kernel2' in AVM firmware */
 200                                 label = "uboot1";
 201                                 reg = <0xf00000 0x400000>;
 202                         };
 203
 204                         partition@1300000 {
 205                                 label = "ubi";
 206                                 reg = <0x1300000 0x6d00000>;
 207                         };
 208                 };
 209         };
 210 };
 211
 212 &cryptobam {
 213         status = "okay";
 214 };
 215
 216 &blsp_dma {
 217         status = "okay";
 218 };
 219
 220 &blsp1_uart1 {
 221         pinctrl-0 = <&serial_0_pins>;
 222         pinctrl-names = "default";
 223         status = "okay";
 224 };
 225
 226 &qpic_bam {
 227         status = "okay";
 228 };
 229
 230 &wifi0 {
 231         status = "okay";
 232         /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
 233         qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
 234 };
 235
 236 &wifi1 {
 237         status = "okay";
 238         ieee80211-freq-limit = <5170000 5350000>;
 239         /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
 240         qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
 241 };
 242
 243 &pcie0 {
 244         status = "okay";
 245
 246         perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
 247         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 248
 249         bridge@0,0 {
 250                 reg = <0x00000000 0 0 0 0>;
 251                 #address-cells = <3>;
 252                 #size-cells = <2>;
 253                 ranges;
 254
 255                 wifi@1,0 {
 256                         /* QCA9984 */
 257                         compatible = "qcom,ath10k";
 258                         status = "okay";
 259                         reg = <0x00010000 0 0 0 0>;
 260                         ieee80211-freq-limit = <5470000 5875000>;
 261                         /* Uses the reference BDF */
 262                 };
 263         };
 264 };