target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "Aruba AP-303H";
  10         compatible = "aruba,ap-303h";
  11
  12         aliases {
  13                 led-boot = &led_system_green;
  14                 led-failsafe = &led_system_red;
  15                 led-running = &led_system_green;
  16                 led-upgrade = &led_system_amber;
  17         };
  18
  19         memory {
  20                 device_type = "memory";
  21                 reg = <0x80000000 0x10000000>;
  22         };
  23
  24         soc {
  25                 rng@22000 {
  26                         status = "okay";
  27                 };
  28
  29                 mdio@90000 {
  30                         status = "okay";
  31                         pinctrl-0 = <&mdio_pins>;
  32                         pinctrl-names = "default";
  33
  34                         reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
  35                         reset-delay-us = <2000>;
  36                 };
  37
  38                 counter@4a1000 {
  39                         compatible = "qcom,qca-gcnt";
  40                         reg = <0x4a1000 0x4>;
  41                 };
  42
  43                 ess_tcsr@1953000 {
  44                         compatible = "qcom,tcsr";
  45                         reg = <0x1953000 0x1000>;
  46                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  47                 };
  48
  49                 tcsr@1949000 {
  50                         compatible = "qcom,tcsr";
  51                         reg = <0x1949000 0x100>;
  52                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  53                 };
  54
  55                 tcsr@194b000 {
  56                         compatible = "qcom,tcsr";
  57                         reg = <0x194b000 0x100>;
  58                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  59                 };
  60
  61                 tcsr@1957000 {
  62                         compatible = "qcom,tcsr";
  63                         reg = <0x1957000 0x100>;
  64                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  65                 };
  66
  67                 usb2@60f8800 {
  68                         status = "okay";
  69                 };
  70
  71                 crypto@8e3a000 {
  72                         status = "okay";
  73                 };
  74
  75                 watchdog@b017000 {
  76                         status = "okay";
  77                 };
  78
  79                 ess-switch@c000000 {
  80                         status = "okay";
  81                 };
  82
  83                 edma@c080000 {
  84                         status = "okay";
  85                 };
  86
  87                 i2c_0: i2c@78b7000 {
  88                         pinctrl-0 = <&i2c_0_pins>;
  89                         pinctrl-names = "default";
  90                         status = "okay";
  91
  92                         tpm@29 {
  93                                 /* No Driver */
  94                                 compatible = "atmel,at97sc3203";
  95                                 reg = <0x29>;
  96                                 read-only;
  97                         };
  98
  99                         power-monitor@40 {
 100                                 /* No driver */
 101                                 compatible = "isl,isl28022";
 102                                 reg = <0x40>;
 103                     };
 104                 };
 105         };
 106
 107         leds {
 108                 compatible = "gpio-leds";
 109
 110                 wifi_green {
 111                         label = "ap-303h:green:wifi";
 112                         gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
 113                         linux,default-trigger = "phy0tpt";
 114                 };
 115
 116                 wifi_amber {
 117                         label = "ap-303h:amber:wifi";
 118                         gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
 119                         linux,default-trigger = "phy1tpt";
 120                 };
 121
 122                 pse {
 123                         label = "ap-303h:green:pse";
 124                         gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
 125                 };
 126
 127                 led_system_red: system_red {
 128                         label = "ap-303h:red:system";
 129                         gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 led_system_green: system_green {
 133                         label = "ap-303h:green:system";
 134                         gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
 135                 };
 136
 137                 led_system_amber: system_amber {
 138                         label = "ap-303h:amber:system";
 139                         gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
 140                 };
 141         };
 142
 143         keys {
 144                 compatible = "gpio-keys";
 145
 146                 reset {
 147                         label = "Reset button";
 148                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
 149                         linux,code = <KEY_RESTART>;
 150                 };
 151         };
 152 };
 153
 154 &blsp_dma {
 155         status = "okay";
 156 };
 157
 158 &blsp1_uart1 {
 159         pinctrl-0 = <&serial_0_pins>;
 160         pinctrl-names = "default";
 161         status = "okay";
 162 };
 163
 164 &blsp1_uart2 {
 165         /* Texas Instruments CC2540T BLE radio */
 166         pinctrl-0 = <&serial_1_pins>;
 167         pinctrl-names = "default";
 168         status = "okay";
 169 };
 170
 171 &cryptobam {
 172         status = "okay";
 173 };
 174
 175 &qpic_bam {
 176         status = "okay";
 177 };
 178
 179 &tlmm {
 180         /*
 181          * In addition to the Pins listed below,
 182          * the following GPIOs have "features":
 183          * 39 - out - active low to force HW reset
 184          * 32 - out - active low to reset TPM
 185          * 43 - out - active low to reset BLE radio
 186          * 41 - out - pulse to set warm reset status
 187          * 34 - out - active low to enable PSE port
 188          * 22 - in  - active low when 802.3at powered
 189          * 29 - in  - active high when DC powered
 190          * 40 - in  - active low when reset due to cold HW reset
 191          * 30 - in  - active low when USB overcurrent detected
 192          * 35 - in  - interrupt line for power monitor chip
 193          * 31 - in  - active low when PSE port active
 194          */
 195         mdio_pins: mdio_pinmux {
 196                 mux_1 {
 197                         pins = "gpio6";
 198                         function = "mdio";
 199                         bias-pull-up;
 200                 };
 201                 mux_2 {
 202                         pins = "gpio7";
 203                         function = "mdc";
 204                         bias-pull-up;
 205                 };
 206         };
 207
 208         spi_0_pins: spi_0_pinmux {
 209                 pin {
 210                         function = "blsp_spi0";
 211                         pins = "gpio13", "gpio14", "gpio15";
 212                         drive-strength = <12>;
 213                         bias-disable;
 214                 };
 215                 pin_cs {
 216                         function = "gpio";
 217                         pins = "gpio12", "gpio59";
 218                         drive-strength = <2>;
 219                         bias-disable;
 220                         output-high;
 221                 };
 222         };
 223
 224         i2c_0_pins: i2c_0_pinmux {
 225                 mux {
 226                         pins = "gpio20", "gpio21";
 227                         function = "blsp_i2c0";
 228                         drive-strength = <4>;
 229                         bias-disable;
 230                 };
 231         };
 232
 233         serial_0_pins: serial_0_pinmux {
 234                 mux {
 235                         pins = "gpio16", "gpio17";
 236                         function = "blsp_uart0";
 237                         bias-disable;
 238                 };
 239         };
 240
 241         serial_1_pins: serial_1_pinmux {
 242                 mux {
 243                         pins = "gpio8", "gpio9";
 244                         function = "blsp_uart1";
 245                         bias-disable;
 246                 };
 247         };
 248
 249         usb-power {
 250                 line-name = "USB-power";
 251                 gpios = <23 GPIO_ACTIVE_HIGH>;
 252                 gpio-hog;
 253                 output-high;
 254         };
 255 };
 256
 257 &blsp1_spi1 {
 258         pinctrl-0 = <&spi_0_pins>;
 259         pinctrl-names = "default";
 260         status = "okay";
 261         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
 262
 263         flash@0 {
 264                 compatible = "jedec,spi-nor";
 265                 reg = <0>;
 266                 spi-max-frequency = <24000000>;
 267
 268                 partitions {
 269                         compatible = "fixed-partitions";
 270                         #address-cells = <1>;
 271                         #size-cells = <1>;
 272
 273                         /*
 274                          * There is no partition map for the NOR flash
 275                          * in the stock firmware.
 276                          *
 277                          * All partitions here are based on offsets
 278                          * found in the U-Boot GPL code and information
 279                          * from smem.
 280                          */
 281
 282                         partition@0 {
 283                                 label = "sbl1";
 284                                 reg = <0x0 0x40000>;
 285                                 read-only;
 286                         };
 287
 288                         partition@40000 {
 289                                 label = "mibib";
 290                                 reg = <0x40000 0x20000>;
 291                                 read-only;
 292                         };
 293
 294                         partition@60000 {
 295                                 label = "qsee";
 296                                 reg = <0x60000 0x60000>;
 297                                 read-only;
 298                         };
 299
 300                         partition@c0000 {
 301                                 label = "cdt";
 302                                 reg = <0xc0000 0x10000>;
 303                                 read-only;
 304                         };
 305
 306                         partition@d0000 {
 307                                 label = "ddrparams";
 308                                 reg = <0xd0000 0x10000>;
 309                                 read-only;
 310                         };
 311
 312                         partition@e0000 {
 313                                 label = "appsblenv";
 314                                 reg = <0xe0000 0x10000>;
 315                                 read-only;
 316                         };
 317
 318                         partition@f0000 {
 319                                 label = "appsbl";
 320                                 reg = <0xf0000 0x100000>;
 321                                 read-only;
 322                         };
 323
 324                         partition@1e0000 {
 325                                 label = "ART";
 326                                 reg = <0x1f0000 0x10000>;
 327                                 read-only;
 328                         };
 329
 330                         partition@1f0000 {
 331                                 label = "osss";
 332                                 reg = <0x200000 0x170000>;
 333                                 read-only;
 334                         };
 335
 336                         partition@200000 {
 337                                 label = "pds";
 338                                 reg = <0x370000 0x10000>;
 339                                 read-only;
 340                         };
 341
 342                         partition@380000 {
 343                                 label = "apcd";
 344                                 reg = <0x380000 0x10000>;
 345                                 read-only;
 346                         };
 347
 348                         partition@390000 {
 349                                 label = "mfginfo";
 350                                 reg = <0x390000 0x10000>;
 351                                 read-only;
 352                         };
 353
 354                         partition@3a0000 {
 355                                 label = "fcache";
 356                                 reg = <0x3a0000 0x10000>;
 357                                 read-only;
 358                         };
 359
 360                         partition@3b0000 {
 361                                 /* Called osss1 in smem */
 362                                 label = "u-boot-env-bak";
 363                                 reg = <0x3b0000 0x10000>;
 364                                 read-only;
 365                         };
 366
 367                         partition@3f0000 {
 368                                 label = "u-boot-env";
 369                                 reg = <0x3c0000 0x40000>;
 370                                 read-only;
 371                         };
 372                 };
 373         };
 374
 375         flash@1 {
 376                 status = "okay";
 377
 378                 compatible = "spi-nand";
 379                 reg = <1>;
 380                 spi-max-frequency = <24000000>;
 381
 382                 partitions {
 383                         compatible = "fixed-partitions";
 384                         #address-cells = <1>;
 385                         #size-cells = <1>;
 386
 387                         partition@0 {
 388                                 /* 'aos0' in Aruba firmware */
 389                                 label = "aos0";
 390                                 reg = <0x0 0x2000000>;
 391                                 read-only;
 392                         };
 393
 394                         partition@2000000 {
 395                                 /* 'aos1' in Aruba firmware */
 396                                 label = "ubi";
 397                                 reg = <0x2000000 0x2000000>;
 398                         };
 399
 400                         partition@4000000 {
 401                                 label = "aruba-ubifs";
 402                                 reg = <0x4000000 0x4000000>;
 403                                 read-only;
 404                         };
 405                 };
 406         };
 407 };
 408
 409 &usb2_hs_phy {
 410         status = "okay";
 411 };
 412
 413 &wifi0 {
 414         status = "okay";
 415         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 416 };
 417
 418 &wifi1 {
 419         status = "okay";
 420         qcom,ath10k-calibration-variant = "Aruba-AP-303";
 421 };