target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi

   1 /* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2  *
   3  * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
   4  *
   5  */
   6
   7 #include "qcom-ipq4019.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/soc/qcom,tcsr.h>
  11
  12 / {
  13
  14         model = "Qxwlan E2600AC";
  15         compatible = "qcom,ipq4019";
  16
  17         memory {
  18                 device_type = "memory";
  19                 reg = <0x80000000 0x10000000>; /* 256MB */
  20         };
  21
  22         soc {
  23                 rng@22000 {
  24                         status = "okay";
  25                 };
  26
  27                 mdio@90000 {
  28                         status = "okay";
  29                         pinctrl-0 = <&mdio_pins>;
  30                         pinctrl-names = "default";
  31                 };
  32
  33                 ess-psgmii@98000 {
  34                         status = "okay";
  35                 };
  36
  37                 tcsr@1949000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1949000 0x100>;
  40                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  41                 };
  42
  43                 tcsr@194b000 {
  44                         /* select hostmode */
  45                         compatible = "qcom,tcsr";
  46                         reg = <0x194b000 0x100>;
  47                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  48                         status = "okay";
  49                 };
  50
  51                 ess_tcsr@1953000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1953000 0x1000>;
  54                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  55                 };
  56
  57                 tcsr@1957000 {
  58                         compatible = "qcom,tcsr";
  59                         reg = <0x1957000 0x100>;
  60                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  61                 };
  62
  63                 usb2: usb2@60f8800 {
  64                         status = "okay";
  65
  66                         dwc3@6000000 {
  67                                 #address-cells = <1>;
  68                                 #size-cells = <0>;
  69
  70                                 usb2_port1: port@1 {
  71                                         reg = <1>;
  72                                         #trigger-source-cells = <0>;
  73                                 };
  74                         };
  75                 };
  76
  77                 serial@78af000 {
  78                         pinctrl-0 = <&serial_0_pins>;
  79                         pinctrl-names = "default";
  80                         status = "okay";
  81                 };
  82
  83                 serial@78b0000 {
  84                         pinctrl-0 = <&serial_1_pins>;
  85                         pinctrl-names = "default";
  86                         status = "okay";
  87                 };
  88
  89                 i2c@78b7000 { /* BLSP1 QUP2 */
  90                         pinctrl-0 = <&i2c_0_pins>;
  91                         pinctrl-names = "default";
  92
  93                         status = "okay";
  94                 };
  95
  96                 usb3: usb3@8af8800 {
  97                         status = "okay";
  98
  99                         dwc3@8a00000 {
 100                                 #address-cells = <1>;
 101                                 #size-cells = <0>;
 102
 103                                 usb3_port1: port@1 {
 104                                         reg = <1>;
 105                                         #trigger-source-cells = <0>;
 106                                 };
 107
 108                                 usb3_port2: port@2 {
 109                                         reg = <2>;
 110                                         #trigger-source-cells = <0>;
 111                                 };
 112                         };
 113                 };
 114
 115                 crypto@8e3a000 {
 116                         status = "okay";
 117                 };
 118
 119                 watchdog@b017000 {
 120                         status = "okay";
 121                 };
 122
 123                 ess-switch@c000000 {
 124                         status = "okay";
 125                 };
 126
 127                 edma@c080000 {
 128                         status = "okay";
 129                 };
 130
 131                 leds {
 132                         compatible = "gpio-leds";
 133
 134                         led1 {
 135                                 label = "e2600ac:green:wlan0";
 136                                 gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
 137                         };
 138
 139                         led2 {
 140                                 label = "e2600ac:green:wlan1";
 141                                 gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
 142                         };
 143
 144                         led3 {
 145                                 label = "e2600ac:green:usb";
 146                                 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
 147                                 trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 148                                 linux,default-trigger = "usbport";
 149                         };
 150
 151                         led4 {
 152                                 label = "e2600ac:green:ctrl1";
 153                                 gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
 154                         };
 155
 156                         led5 {
 157                                 label = "e2600ac:green:ctrl2";
 158                                 gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
 159                         };
 160
 161                         led6 {
 162                                 label = "e2600ac:green:ctrl3";
 163                                 gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 164                         };
 165                 };
 166
 167                 keys {
 168                         compatible = "gpio-keys";
 169
 170                         reset {
 171                                 label = "reset";
 172                                 gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
 173                                 linux,code = <KEY_RESTART>;
 174                         };
 175                 };
 176         };
 177 };
 178
 179 &blsp_dma {
 180         status = "okay";
 181 };
 182
 183 &cryptobam {
 184         status = "okay";
 185 };
 186
 187 &qpic_bam {
 188         status = "okay";
 189 };
 190
 191 &tlmm {
 192         i2c_0_pins: i2c-0-pinmux {
 193                 mux {
 194                         pins = "gpio20", "gpio21";
 195                         function = "blsp_i2c0";
 196                         bias-disable;
 197                 };
 198         };
 199
 200         mdio_pins: mdio_pinmux {
 201                 mux_1 {
 202                         pins = "gpio6";
 203                         function = "mdio";
 204                         bias-pull-up;
 205                 };
 206                 mux_2 {
 207                         pins = "gpio7";
 208                         function = "mdc";
 209                         bias-pull-up;
 210                 };
 211         };
 212
 213         serial_0_pins: serial0-pinmux {
 214                 mux {
 215                         pins = "gpio16", "gpio17";
 216                         function = "blsp_uart0";
 217                         bias-disable;
 218                 };
 219         };
 220
 221         serial_1_pins: serial1_pinmux {
 222                 mux {
 223                         pins = "gpio8", "gpio9";
 224                         function = "blsp_uart1";
 225                         bias-disable;
 226                 };
 227         };
 228
 229         spi_0_pins: spi_0_pinmux {
 230                 pinmux {
 231                         function = "blsp_spi0";
 232                         pins = "gpio13", "gpio14", "gpio15";
 233                         drive-strength = <12>;
 234                         bias-disable;
 235                 };
 236                 pinmux_cs {
 237                         function = "gpio";
 238                         pins = "gpio12";
 239                         drive-strength = <2>;
 240                         bias-disable;
 241                         output-high;
 242                 };
 243         };
 244 };
 245
 246 &usb3_ss_phy {
 247         status = "okay";
 248 };
 249
 250 &usb3_hs_phy {
 251         status = "okay";
 252 };
 253
 254 &usb2_hs_phy {
 255         status = "okay";
 256 };
 257
 258 &wifi0 {
 259         status = "okay";
 260         qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 261 };
 262
 263 &wifi1 {
 264         status = "okay";
 265         qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
 266 };