target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
   3
   4 #include "qcom-ipq4019.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         soc {
  11                 rng@22000 {
  12                         status = "okay";
  13                 };
  14
  15                 mdio@90000 {
  16                         status = "okay";
  17
  18                         pinctrl-0 = <&mdio_pins>;
  19                         pinctrl-names = "default";
  20                 };
  21
  22                 ess-psgmii@98000 {
  23                         status = "okay";
  24                 };
  25
  26                 counter@4a1000 {
  27                         compatible = "qcom,qca-gcnt";
  28                         reg = <0x4a1000 0x4>;
  29                 };
  30
  31                 tcsr@1949000 {
  32                         compatible = "qcom,tcsr";
  33                         reg = <0x1949000 0x100>;
  34                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  35                 };
  36
  37                 tcsr@194b000 {
  38                         status = "okay";
  39
  40                         compatible = "qcom,tcsr";
  41                         reg = <0x194b000 0x100>;
  42                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  43                 };
  44
  45                 ess_tcsr@1953000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1953000 0x1000>;
  48                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  49                 };
  50
  51                 tcsr@1957000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1957000 0x100>;
  54                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  55                 };
  56
  57                 usb2: usb2@60f8800 {
  58                         status = "okay";
  59                 };
  60
  61                 usb3: usb3@8af8800 {
  62                         status = "okay";
  63                 };
  64
  65                 crypto@8e3a000 {
  66                         status = "okay";
  67                 };
  68
  69                 watchdog@b017000 {
  70                         status = "okay";
  71                 };
  72
  73                 ess-switch@c000000 {
  74                         status = "okay";
  75
  76                         switch_lan_bmp = <0x10>; /* lan port bitmap */
  77                 };
  78
  79                 edma@c080000 {
  80                         status = "okay";
  81                 };
  82         };
  83 };
  84
  85 &tlmm {
  86         mdio_pins: mdio_pinmux {
  87                 pinmux_1 {
  88                         pins = "gpio53";
  89                         function = "mdio";
  90                 };
  91
  92                 pinmux_2 {
  93                         pins = "gpio52";
  94                         function = "mdc";
  95                 };
  96
  97                 pinconf {
  98                         pins = "gpio52", "gpio53";
  99                         bias-pull-up;
 100                 };
 101         };
 102
 103         serial_pins: serial_pinmux {
 104                 mux {
 105                         pins = "gpio60", "gpio61";
 106                         function = "blsp_uart0";
 107                         bias-disable;
 108                 };
 109         };
 110
 111         spi_0_pins: spi_0_pinmux {
 112                 pin {
 113                         function = "blsp_spi0";
 114                         pins = "gpio55", "gpio56", "gpio57";
 115                         drive-strength = <2>;
 116                         bias-disable;
 117                 };
 118
 119                 pin_cs {
 120                         function = "gpio";
 121                         pins = "gpio54", "gpio59";
 122                         drive-strength = <2>;
 123                         bias-disable;
 124                         output-high;
 125                 };
 126         };
 127 };
 128
 129 &blsp_dma {
 130         status = "okay";
 131 };
 132
 133 &blsp1_spi1 {
 134         status = "okay";
 135
 136         pinctrl-0 = <&spi_0_pins>;
 137         pinctrl-names = "default";
 138         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
 139
 140         flash@0 {
 141                 status = "okay";
 142
 143                 compatible = "jedec,spi-nor";
 144                 reg = <0>;
 145                 spi-max-frequency = <24000000>;
 146
 147                 partitions {
 148                         compatible = "fixed-partitions";
 149                         #address-cells = <1>;
 150                         #size-cells = <1>;
 151
 152                         partition@0 {
 153                                 label = "SBL1";
 154                                 reg = <0x00000000 0x00040000>;
 155                                 read-only;
 156                         };
 157
 158                         partition@40000 {
 159                                 label = "MIBIB";
 160                                 reg = <0x00040000 0x00020000>;
 161                                 read-only;
 162                         };
 163
 164                         partition@60000 {
 165                                 label = "QSEE";
 166                                 reg = <0x00060000 0x00060000>;
 167                                 read-only;
 168                         };
 169
 170                         partition@c0000 {
 171                                 label = "CDT";
 172                                 reg = <0x000c0000 0x00010000>;
 173                                 read-only;
 174                         };
 175
 176                         partition@d0000 {
 177                                 label = "DDRPARAMS";
 178                                 reg = <0x000d0000 0x00010000>;
 179                                 read-only;
 180                         };
 181
 182                         partition@e0000 {
 183                                 label = "APPSBLENV"; /* uboot env*/
 184                                 reg = <0x000e0000 0x00010000>;
 185                                 read-only;
 186                         };
 187
 188                         partition@f0000 {
 189                                 label = "APPSBL"; /* uboot */
 190                                 reg = <0x000f0000 0x00080000>;
 191                                 read-only;
 192                         };
 193
 194                         partition@170000 {
 195                                 label = "ART";
 196                                 reg = <0x00170000 0x00010000>;
 197                                 read-only;
 198                         };
 199                 };
 200         };
 201
 202         spi-nand@1 {
 203                 status = "okay";
 204
 205                 compatible = "spi-nand";
 206                 reg = <1>;
 207                 spi-max-frequency = <24000000>;
 208
 209                 partitions {
 210                         compatible = "fixed-partitions";
 211                         #address-cells = <1>;
 212                         #size-cells = <1>;
 213
 214                         partition@0 {
 215                                 label = "ubi";
 216                                 reg = <0x00000000 0x08000000>;
 217                         };
 218                 };
 219         };
 220 };
 221
 222 &blsp1_uart1 {
 223         status = "okay";
 224
 225         pinctrl-0 = <&serial_pins>;
 226         pinctrl-names = "default";
 227 };
 228
 229 &cryptobam {
 230         status = "okay";
 231 };
 232
 233 &gmac0 {
 234         qcom,poll_required = <1>;
 235         qcom,poll_required_dynamic = <1>;
 236         qcom,phy_mdio_addr = <3>;
 237         vlan_tag = <1 0x10>;
 238 };
 239
 240 &gmac1 {
 241         qcom,poll_required = <1>;
 242         qcom,poll_required_dynamic = <1>;
 243         qcom,phy_mdio_addr = <4>;
 244         vlan_tag = <2 0x20>;
 245 };
 246
 247 &wifi0 {
 248         status = "okay";
 249
 250         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 251 };
 252
 253 &wifi1 {
 254         status = "okay";
 255
 256         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
 257 };
 258
 259 &usb3_ss_phy {
 260         status = "okay";
 261 };
 262
 263 &usb3_hs_phy {
 264         status = "okay";
 265 };
 266
 267 &usb2_hs_phy {
 268         status = "okay";
 269 };