target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Box 4040";
  10         compatible = "avm,fritzbox-4040";
  11
  12         aliases {
  13                 led-boot = &power;
  14                 led-failsafe = &flash;
  15                 led-running = &power;
  16                 led-upgrade = &flash;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         soc {
  21                 rng@22000 {
  22                         status = "okay";
  23                 };
  24
  25                 mdio@90000 {
  26                         status = "okay";
  27                 };
  28
  29                 ess-psgmii@98000 {
  30                         status = "okay";
  31                 };
  32
  33                 tcsr@1949000 {
  34                         compatible = "qcom,tcsr";
  35                         reg = <0x1949000 0x100>;
  36                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  37                 };
  38
  39                 tcsr@194b000 {
  40                         compatible = "qcom,tcsr";
  41                         reg = <0x194b000 0x100>;
  42                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  43                 };
  44
  45                 ess_tcsr@1953000 {
  46                         compatible = "qcom,tcsr";
  47                         reg = <0x1953000 0x1000>;
  48                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  49                 };
  50
  51                 tcsr@1957000 {
  52                         compatible = "qcom,tcsr";
  53                         reg = <0x1957000 0x100>;
  54                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  55                 };
  56
  57                 usb2@60f8800 {
  58                         status = "okay";
  59                 };
  60
  61                 usb3@8af8800 {
  62                         status = "okay";
  63                 };
  64
  65                 crypto@8e3a000 {
  66                         status = "okay";
  67                 };
  68
  69                 watchdog@b017000 {
  70                         status = "okay";
  71                 };
  72
  73                 qca8075: ess-switch@c000000 {
  74                         status = "okay";
  75
  76                         #gpio-cells = <2>;
  77                         gpio-controller;
  78
  79                         enable-usb-power {
  80                                 gpio-hog;
  81                                 line-name = "enable USB3 power";
  82                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  83                                 output-high;
  84                         };
  85                 };
  86
  87                 edma@c080000 {
  88                         status = "okay";
  89                 };
  90         };
  91
  92         keys {
  93                 compatible = "gpio-keys";
  94
  95                 wlan {
  96                         label = "wlan";
  97                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  98                         linux,code = <KEY_RFKILL>;
  99                 };
 100
 101                 wps {
 102                         label = "wps";
 103                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                 };
 106         };
 107
 108         switch-leds {
 109                 compatible = "gpio-leds";
 110
 111                 wlan {
 112                         label = "fritz4040:green:wlan";
 113                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 panic: info_red {
 117                         label = "fritz4040:red:info";
 118                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 119                         panic-indicator;
 120                 };
 121
 122                 wan {
 123                         label = "fritz4040:green:wan";
 124                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 125                 };
 126
 127                 power: power {
 128                         label = "fritz4040:green:power";
 129                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 lan {
 133                         label = "fritz4040:green:lan";
 134                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 135                 };
 136
 137                 flash: info_amber {
 138                         label = "fritz4040:amber:info";
 139                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 140                 };
 141         };
 142 };
 143
 144 &tlmm {
 145         serial_pins: serial_pinmux {
 146                 mux {
 147                         pins = "gpio60", "gpio61";
 148                         function = "blsp_uart0";
 149                         bias-disable;
 150                 };
 151         };
 152
 153         spi_0_pins: spi_0_pinmux {
 154                 mux {
 155                         function = "blsp_spi0";
 156                         pins = "gpio55", "gpio56", "gpio57";
 157                         drive-strength = <12>;
 158                         bias-disable;
 159                 };
 160
 161                 mux_cs {
 162                         function = "gpio";
 163                         pins = "gpio54";
 164                         drive-strength = <2>;
 165                         bias-disable;
 166                         output-high;
 167                 };
 168         };
 169 };
 170
 171 &cryptobam {
 172         status = "okay";
 173 };
 174
 175 &blsp_dma {
 176         status = "okay";
 177 };
 178
 179 &blsp1_spi1 { /* BLSP1 QUP1 */
 180         pinctrl-0 = <&spi_0_pins>;
 181         pinctrl-names = "default";
 182         status = "okay";
 183         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 184
 185         flash@0 {
 186                 compatible = "jedec,spi-nor";
 187                 reg = <0>;
 188                 spi-max-frequency = <24000000>;
 189                 status = "okay";
 190                 m25p,fast-read;
 191
 192                 partitions {
 193                         compatible = "fixed-partitions";
 194                         #address-cells = <1>;
 195                         #size-cells = <1>;
 196
 197                         partition0@0 {
 198                                 label = "SBL1";
 199                                 reg = <0x00000000 0x00040000>;
 200                                 read-only;
 201                         };
 202                         partition1@40000 {
 203                                 label = "MIBIB";
 204                                 reg = <0x00040000 0x00020000>;
 205                                 read-only;
 206                         };
 207                         partition2@60000 {
 208                                 label = "QSEE";
 209                                 reg = <0x00060000 0x00060000>;
 210                                 read-only;
 211                         };
 212                         partition3@c0000 {
 213                                 label = "CDT";
 214                                 reg = <0x000c0000 0x00010000>;
 215                                 read-only;
 216                         };
 217                         partition4@d0000 {
 218                                 label = "DDRPARAMS";
 219                                 reg = <0x000d0000 0x00010000>;
 220                                 read-only;
 221                         };
 222                         partition5@e0000 {
 223                                 label = "APPSBLENV"; /* uboot env - empty */
 224                                 reg = <0x000e0000 0x00010000>;
 225                                 read-only;
 226                         };
 227                         partition6@f0000 {
 228                                 label = "urlader"; /* APPSBL */
 229                                 reg = <0x000f0000 0x0002dc000>;
 230                                 read-only;
 231                         };
 232                         partition7@11dc00 {
 233                                 /* make a backup of this partition! */
 234                                 label = "urlader_config";
 235                                 reg = <0x0011dc00 0x00002400>;
 236                                 read-only;
 237                         };
 238                         partition8@120000 {
 239                                 label = "tffs1";
 240                                 reg = <0x00120000 0x00080000>;
 241                                 read-only;
 242                         };
 243                         partition9@1a0000 {
 244                                 label = "tffs2";
 245                                 reg = <0x001a0000 0x00080000>;
 246                                 read-only;
 247                         };
 248                         partition10@220000 {
 249                                 label = "uboot";
 250                                 reg = <0x00220000 0x00080000>;
 251                                 read-only;
 252                         };
 253                         partition11@2A0000 {
 254                                 compatible = "denx,fit";
 255                                 label = "firmware";
 256                                 reg = <0x002a0000 0x01c60000>;
 257                         };
 258                         partition12@1f00000 {
 259                                 label = "jffs2";
 260                                 reg = <0x01f00000 0x00100000>;
 261                         };
 262                 };
 263         };
 264 };
 265
 266 &blsp1_uart1 {
 267         pinctrl-0 = <&serial_pins>;
 268         pinctrl-names = "default";
 269         status = "okay";
 270 };
 271
 272 &usb3_ss_phy {
 273         status = "okay";
 274 };
 275
 276 &usb3_hs_phy {
 277         status = "okay";
 278 };
 279
 280 &usb2_hs_phy {
 281         status = "okay";
 282 };
 283
 284 &wifi0 {
 285         status = "okay";
 286         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 287 };
 288
 289 &wifi1 {
 290         status = "okay";
 291         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 292 };