target/linux/brcm63xx/dts/r5010unv2.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "NuCom R5010UN v2";
   9         compatible = "nucom,r5010unv2", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22                 debounce-interval = <60>;
  23
  24                 reset {
  25                         label = "reset";
  26                         gpios = <&pinctrl 23 1>;
  27                         linux,code = <KEY_RESTART>;
  28                 };
  29                 wps {
  30                         label = "wps";
  31                         gpios = <&pinctrl 24 1>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38
  39                 inet_green {
  40                         label = "R5010UNv2:green:inet";
  41                         gpios = <&pinctrl 1 1>;
  42                 };
  43                 inet_fail_red {
  44                         label = "R5010UNv2:red:inet-fail";
  45                         gpios = <&pinctrl 2 1>;
  46                 };
  47                 dsl_red {
  48                         label = "R5010UNv2:green:dsl";
  49                         gpios = <&pinctrl 3 1>;
  50                 };
  51                 power_green {
  52                         label = "R5010UNv2:green:power";
  53                         gpios = <&pinctrl 4 1>;
  54                         default-state = "on";
  55                 };
  56                 power_fail_red {
  57                         label = "R5010UNv2:red:power-fail";
  58                         gpios = <&pinctrl 5 1>;
  59                 };
  60                 wps_green {
  61                         label = "R5010UNv2:green:wps";
  62                         gpios = <&pinctrl 10 1>;
  63                 };
  64                 usb_green {
  65                         label = "R5010UNv2:green:usb";
  66                         gpios = <&pinctrl 11 1>;
  67                 };
  68         };
  69 };
  70
  71 &hsspi {
  72         status = "ok";
  73
  74         flash@0 {
  75                 compatible = "jedec,spi-nor";
  76                 spi-max-frequency = <16666667>;
  77                 spi-tx-bus-width = <2>;
  78                 spi-rx-bus-width = <2>;
  79                 reg = <0>;
  80
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83
  84                 linux,part-probe = "bcm63xxpart";
  85
  86         partitions {
  87                 compatible = "fixed-partitions";
  88                 #address-cells = <1>;
  89                 #size-cells = <1>;
  90
  91                         cfe@0 {
  92                                 reg = <0x000000 0x010000>;
  93                                 label = "cfe";
  94                                 read-only;
  95                         };
  96
  97                         linux@10000 {
  98                                 reg = <0x010000 0x7e0000>;
  99                                 label = "linux";
 100                                 compatible = "brcm,bcm963xx-imagetag";
 101                         };
 102
 103                         nvram@7f0000 {
 104                                 reg = <0x7f0000 0x010000>;
 105                                 label = "nvram";
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &uart0 {
 112         status = "ok";
 113 };