target/linux/brcm63xx/dts/nb6-ser-r0.dts

   1 /dts-v1/;
   2
   3 #include "bcm6362.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "SFR neufbox 6 (Sercomm)";
   9         compatible = "sfr,nb6-ser-r0", "brcm,bcm6362";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 service {
  24                         label = "service";
  25                         gpios = <&pinctrl 10 1>;
  26                         linux,code = <BTN_0>;
  27                 };
  28                 wlan {
  29                         label = "wlan";
  30                         gpios = <&pinctrl 12 1>;
  31                         linux,code = <KEY_WLAN>;
  32                 };
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&pinctrl 24 1>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&pinctrl 25 1>;
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                 };
  43         };
  44
  45         switch {
  46                 compatible = "realtek,rtl8367";
  47                 gpio-sda = <&pinctrl 18 0>;
  48                 gpio-sck = <&pinctrl 20 0>;
  49
  50                 realtek,extif0 = <1 5 1 1 1 1 1 1 2>;
  51         };
  52 };
  53
  54 &hsspi {
  55         status = "ok";
  56
  57         flash@0 {
  58                 compatible = "jedec,spi-nor";
  59                 spi-max-frequency = <20000000>;
  60                 spi-tx-bus-width = <2>;
  61                 spi-rx-bus-width = <2>;
  62                 reg = <0>;
  63
  64                 #address-cells = <1>;
  65                 #size-cells = <1>;
  66
  67                 linux,part-probe = "bcm63xxpart";
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         cfe@0 {
  75                                 reg = <0x000000 0x010000>;
  76                                 label = "cfe";
  77                                 read-only;
  78                         };
  79
  80                         linux@10000 {
  81                                 reg = <0x010000 0xfe0000>;
  82                                 label = "linux";
  83                                 compatible = "brcm,bcm963xx-imagetag";
  84                         };
  85
  86                         nvram@ff0000 {
  87                                 reg = <0xff0000 0x010000>;
  88                                 label = "nvram";
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &uart0 {
  95         status = "ok";
  96 };