target/linux/brcm63xx/dts/fast2704n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2704N";
   9         compatible = "sagem,f@st2704n", "brcm,bcm6318";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 wlan {
  24                         label = "wlan";
  25                         gpios = <&pinctrl 1 0>;
  26                         linux,code = <KEY_WLAN>;
  27                 };
  28                 wps {
  29                         label = "wps";
  30                         gpios = <&pinctrl 33 1>;
  31                         linux,code = <KEY_WPS_BUTTON>;
  32                 };
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&pinctrl 34 1>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42
  43                 wps_green {
  44                         label = "F@ST2704N:green:wps";
  45                         gpios = <&pinctrl 2 1>;
  46                 };
  47                 lan1_green {
  48                         label = "F@ST2704N:green:lan1";
  49                         gpios = <&pinctrl 4 1>;
  50                 };
  51                 lan2_green {
  52                         label = "F@ST2704N:green:lan2";
  53                         gpios = <&pinctrl 5 1>;
  54                 };
  55                 lan3_green {
  56                         label = "F@ST2704N:green:lan3";
  57                         gpios = <&pinctrl 6 1>;
  58                 };
  59                 lan4_green {
  60                         label = "F@ST2704N:green:lan4";
  61                         gpios = <&pinctrl 7 1>;
  62                 };
  63                 inet_green {
  64                         label = "F@ST2704N:green:inet";
  65                         gpios = <&pinctrl 8 1>;
  66                 };
  67                 inet_red {
  68                         label = "F@ST2704N:red:inet";
  69                         gpios = <&pinctrl 9 1>;
  70                 };
  71                 dsl_green {
  72                         label = "F@ST2704N:green:dsl";
  73                         gpios = <&pinctrl 10 1>;
  74                 };
  75                 power_red {
  76                         label = "F@ST2704N:red:power";
  77                         gpios = <&pinctrl 11 1>;
  78                 };
  79                 power_green {
  80                         label = "F@ST2704N:green:power";
  81                         gpios = <&pinctrl 47 1>;
  82                         default-state = "on";
  83                 };
  84                 usb_green {
  85                         label = "F@ST2704N:green:usb";
  86                         gpios = <&pinctrl 49 1>;
  87                 };
  88         };
  89 };
  90
  91 &hsspi {
  92         status = "ok";
  93
  94         flash@0 {
  95                 compatible = "jedec,spi-nor";
  96                 spi-max-frequency = <62500000>;
  97                 spi-tx-bus-width = <2>;
  98                 spi-rx-bus-width = <2>;
  99                 reg = <0>;
 100
 101                 #address-cells = <1>;
 102                 #size-cells = <1>;
 103
 104                 linux,part-probe = "bcm63xxpart";
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         cfe@0 {
 112                                 reg = <0x000000 0x010000>;
 113                                 label = "cfe";
 114                                 read-only;
 115                         };
 116
 117                         linux@10000 {
 118                                 reg = <0x010000 0x7e0000>;
 119                                 label = "linux";
 120                                 compatible = "brcm,bcm963xx-imagetag";
 121                         };
 122
 123                         nvram@7f0000 {
 124                                 reg = <0x7f0000 0x010000>;
 125                                 label = "nvram";
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &uart0 {
 132         status = "ok";
 133 };