package/kernel/mac80211/broadcom.mk

   1 PKG_DRIVERS += \
   2         b43 b43legacy brcmsmac brcmfmac brcmutil
   3
   4 PKG_CONFIG_DEPENDS += \
   5         CONFIG_PACKAGE_B43_DEBUG \
   6         CONFIG_PACKAGE_B43_PIO \
   7         CONFIG_PACKAGE_B43_PHY_G \
   8         CONFIG_PACKAGE_B43_PHY_N \
   9         CONFIG_PACKAGE_B43_PHY_LP \
  10         CONFIG_PACKAGE_B43_PHY_HT \
  11         CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \
  12         CONFIG_PACKAGE_B43_BUSES_BCMA \
  13         CONFIG_PACKAGE_B43_BUSES_SSB \
  14         CONFIG_PACKAGE_BRCM80211_DEBUG
  15
  16 config-$(call config_package,b43) += B43
  17 config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
  18 config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
  19 config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB
  20 config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G
  21 config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N
  22 config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP
  23 config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT
  24 config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO
  25 config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG
  26
  27 config-$(call config_package,b43legacy) += B43LEGACY
  28 config-y += B43LEGACY_DMA_MODE
  29
  30 config-$(call config_package,brcmutil) += BRCMUTIL
  31 config-$(call config_package,brcmsmac) += BRCMSMAC
  32 config-$(call config_package,brcmfmac) += BRCMFMAC
  33 config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
  34 config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB
  35 config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
  36 config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
  37
  38 config-$(CONFIG_LEDS_TRIGGERS) += B43_LEDS B43LEGACY_LEDS
  39
  40 #Broadcom firmware
  41 ifneq ($(CONFIG_B43_FW_6_30),)
  42   PKG_B43_FWV4_NAME:=broadcom-wl
  43   PKG_B43_FWV4_VERSION:=6.30.163.46
  44   PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
  45   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
  46   PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
  47   PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d
  48 else
  49 ifneq ($(CONFIG_B43_FW_5_10),)
  50   PKG_B43_FWV4_NAME:=broadcom-wl
  51   PKG_B43_FWV4_VERSION:=5.10.56.27.3
  52   PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
  53   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
  54   PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
  55   PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009
  56 else
  57 ifneq ($(CONFIG_B43_FW_4_178),)
  58   PKG_B43_FWV4_NAME:=broadcom-wl
  59   PKG_B43_FWV4_VERSION:=4.178.10.4
  60   PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
  61   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
  62   PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
  63   PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f
  64 else
  65 ifneq ($(CONFIG_B43_FW_5_100_138),)
  66   PKG_B43_FWV4_NAME:=broadcom-wl
  67   PKG_B43_FWV4_VERSION:=5.100.138
  68   PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
  69   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
  70   PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
  71   PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
  72 else
  73   PKG_B43_FWV4_NAME:=broadcom-wl
  74   PKG_B43_FWV4_VERSION:=4.150.10.5
  75   PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
  76   PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
  77   PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
  78   PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533
  79 endif
  80 endif
  81 endif
  82 endif
  83 ifneq ($(CONFIG_B43_OPENFIRMWARE),)
  84   PKG_B43_FWV4_NAME:=broadcom-wl
  85   PKG_B43_FWV4_VERSION:=5.2
  86   PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
  87   PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
  88   PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware
  89   PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc
  90 endif
  91
  92
  93 define Download/b43
  94   FILE:=$(PKG_B43_FWV4_SOURCE)
  95   URL:=$(PKG_B43_FWV4_SOURCE_URL)
  96   HASH:=$(PKG_B43_FWV4_HASH)
  97 endef
  98 $(eval $(call Download,b43))
  99
 100 define KernelPackage/b43
 101   $(call KernelPackage/mac80211/Default)
 102   TITLE:=Broadcom 43xx wireless support
 103   URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
 104   KCONFIG:= \
 105         CONFIG_HW_RANDOM=y
 106   # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
 107   DEPENDS += \
 108         @PCI_SUPPORT +kmod-mac80211 +kmod-lib-cordic \
 109         $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
 110         $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
 111   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
 112   AUTOLOAD:=$(call AutoProbe,b43)
 113   MENU:=1
 114 endef
 115
 116 define KernelPackage/b43/config
 117
 118 config PACKAGE_B43_USE_SSB
 119         select PACKAGE_kmod-ssb
 120         tristate
 121         depends on !TARGET_brcm47xx && !TARGET_brcm63xx
 122         default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
 123         default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 124
 125 config PACKAGE_B43_USE_BCMA
 126         select PACKAGE_kmod-bcma
 127         tristate
 128         depends on !TARGET_brcm47xx && !TARGET_bcm53xx
 129         default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
 130         default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
 131
 132   if PACKAGE_kmod-b43
 133
 134         choice
 135                 prompt "b43 firmware version"
 136                 default B43_FW_5_100_138
 137                 help
 138                   This option allows you to select the version of the b43 firmware.
 139
 140         config B43_FW_4_150
 141                 bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
 142                 help
 143                   Old stable firmware for BCM43xx devices.
 144
 145                   If unsure, select this.
 146
 147         config B43_FW_4_178
 148                 bool "Firmware 478.104 from driver 4.178.10.4"
 149                 help
 150                   Older firmware for BCM43xx devices.
 151
 152                   If unsure, select the "stable" firmware.
 153
 154         config B43_FW_5_10
 155                 bool "Firmware 508.1084 from driver 5.10.56.27"
 156                 help
 157                   Older firmware for BCM43xx devices.
 158
 159                   If unsure, select the "stable" firmware.
 160
 161         config B43_FW_5_100_138
 162                 bool "Firmware 666.2 from driver 5.100.138 (stable)"
 163                 help
 164                   The currently default firmware for BCM43xx devices.
 165
 166                   This firmware currently gets most of the testing and is needed for some N-PHY devices.
 167
 168                   If unsure, select the this firmware.
 169
 170         config B43_FW_6_30
 171                 bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
 172                 help
 173                   Newer experimental firmware for BCM43xx devices.
 174
 175                   This firmware is mostly untested.
 176
 177                   If unsure, select the "stable" firmware.
 178
 179         config B43_OPENFIRMWARE
 180                 bool "Open FirmWare for WiFi networks"
 181                 help
 182                   Opensource firmware for BCM43xx devices.
 183
 184                   Do _not_ select this, unless you know what you are doing.
 185                   The Opensource firmware is not suitable for embedded devices, yet.
 186                   It does not support QoS, which is bad for AccessPoints.
 187                   It does not support hardware crypto acceleration, which is a showstopper
 188                   for embedded devices with low CPU resources.
 189
 190                   If unsure, select the "stable" firmware.
 191
 192         endchoice
 193
 194         config B43_FW_SQUASH
 195                 bool "Remove unnecessary firmware files"
 196                 depends on !B43_OPENFIRMWARE
 197                 default y
 198                 help
 199                   This options allows you to remove unnecessary b43 firmware files
 200                   from the final rootfs image. This can reduce the rootfs size by
 201                   up to 200k.
 202
 203                   If unsure, say Y.
 204
 205         config B43_FW_SQUASH_COREREVS
 206                 string "Core revisions to include"
 207                 depends on B43_FW_SQUASH
 208                 default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
 209                 default "16,28,29,30" if TARGET_brcm47xx_mips74k
 210                 default "5,6,7,8,9,10,11,13,15,16,28,29,30"
 211                 help
 212                   This is a comma seperated list of core revision numbers.
 213
 214                   Example (keep files for rev5 only):
 215                     5
 216
 217                   Example (keep files for rev5 and rev11):
 218                     5,11
 219
 220         config B43_FW_SQUASH_PHYTYPES
 221                 string "PHY types to include"
 222                 depends on B43_FW_SQUASH
 223                 default "G,N,LP" if TARGET_brcm47xx_legacy
 224                 default "N,HT" if TARGET_brcm47xx_mips74k
 225                 default "G,N,LP,HT"
 226                 help
 227                   This is a comma seperated list of PHY types:
 228                     A  => A-PHY
 229                     AG => Dual A-PHY G-PHY
 230                     G  => G-PHY
 231                     LP => LP-PHY
 232                     N  => N-PHY
 233                     HT  => HT-PHY
 234                     LCN  => LCN-PHY
 235                     LCN40  => LCN40-PHY
 236                     AC  => AC-PHY
 237
 238                   Example (keep files for G-PHY only):
 239                     G
 240
 241                   Example (keep files for G-PHY and N-PHY):
 242                     G,N
 243
 244         choice
 245                 prompt "Supported buses"
 246                 default PACKAGE_B43_BUSES_BCMA_AND_SSB
 247                 help
 248                   This allows choosing buses that b43 should support.
 249
 250         config PACKAGE_B43_BUSES_BCMA_AND_SSB
 251                 depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
 252                 bool "BCMA and SSB"
 253
 254         config PACKAGE_B43_BUSES_BCMA
 255                 depends on !TARGET_brcm47xx_legacy
 256                 bool "BCMA only"
 257
 258         config PACKAGE_B43_BUSES_SSB
 259                 depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
 260                 bool "SSB only"
 261
 262         endchoice
 263
 264         config PACKAGE_B43_DEBUG
 265                 bool "Enable debug output and debugfs for b43"
 266                 default n
 267                 help
 268                   Enable additional debug output and runtime sanity checks for b43
 269                   and enables the debugfs interface.
 270
 271                   If unsure, say N.
 272
 273         config PACKAGE_B43_PIO
 274                 bool "Enable support for PIO transfer mode"
 275                 default n
 276                 help
 277                   Enable support for using PIO instead of DMA. Unless you have DMA
 278                   transfer problems you don't need this.
 279
 280                   If unsure, say N.
 281
 282         config PACKAGE_B43_PHY_G
 283                 bool "Enable support for G-PHYs"
 284                 default n if TARGET_brcm47xx_mips74k
 285                 default y
 286                 help
 287                   Enable support for G-PHY. This includes support for the following devices:
 288                   PCI: BCM4306, BCM4311, BCM4318
 289                   SoC: BCM5352E, BCM4712
 290
 291                   If unsure, say Y.
 292
 293         config PACKAGE_B43_PHY_N
 294                 bool "Enable support for N-PHYs"
 295                 default y
 296                 help
 297                   Enable support for N-PHY. This includes support for the following devices:
 298                   PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
 299                   SoC: BCM4716, BCM4717, BCM4718
 300
 301                   Currently only 11g speed is available.
 302
 303                   If unsure, say Y.
 304
 305         config PACKAGE_B43_PHY_LP
 306                 bool "Enable support for LP-PHYs"
 307                 default n if TARGET_brcm47xx_mips74k
 308                 default y
 309                 help
 310                   Enable support for LP-PHY. This includes support for the following devices:
 311                   PCI: BCM4312
 312                   SoC: BCM5354
 313
 314                   If unsure, say Y.
 315
 316         config PACKAGE_B43_PHY_HT
 317                 bool "Enable support for HT-PHYs"
 318                 default n if TARGET_brcm47xx_legacy
 319                 default y
 320                 help
 321                   Enable support for HT-PHY. This includes support for the following devices:
 322                   PCI: BCM4331
 323
 324                   Currently only 11g speed is available.
 325
 326                   If unsure, say Y.
 327
 328         config PACKAGE_B43_PHY_LCN
 329                 bool "Enable support for LCN-PHYs"
 330                 depends on BROKEN
 331                 default n
 332                 help
 333                   Currently broken.
 334
 335                   If unsure, say N.
 336
 337   endif
 338 endef
 339
 340 define KernelPackage/b43/description
 341 Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
 342 endef
 343
 344 define KernelPackage/b43legacy
 345   $(call KernelPackage/mac80211/Default)
 346   TITLE:=Broadcom 43xx-legacy wireless support
 347   URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
 348   KCONFIG:= \
 349         CONFIG_HW_RANDOM=y
 350   DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_brcm47xx_mips74k +b43legacy-firmware
 351   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
 352   AUTOLOAD:=$(call AutoProbe,b43legacy)
 353   MENU:=1
 354 endef
 355
 356 define KernelPackage/b43legacy/description
 357 Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
 358 endef
 359
 360
 361 define KernelPackage/brcmutil
 362   $(call KernelPackage/mac80211/Default)
 363   TITLE:=Broadcom IEEE802.11n common driver parts
 364   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
 365   DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
 366   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
 367   AUTOLOAD:=$(call AutoProbe,brcmutil)
 368   MENU:=1
 369 endef
 370
 371 define KernelPackage/brcmutil/description
 372  This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
 373 endef
 374
 375 define KernelPackage/brcmutil/config
 376   if PACKAGE_kmod-brcmutil
 377
 378         config PACKAGE_BRCM80211_DEBUG
 379                 bool "Broadcom wireless driver debugging"
 380                 help
 381                   Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
 382
 383   endif
 384 endef
 385
 386 PKG_BRCMSMAC_FW_NAME:=broadcom-wl
 387 PKG_BRCMSMAC_FW_VERSION:=5.100.138
 388 PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
 389 PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
 390 PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
 391 PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
 392
 393 define Download/brcmsmac
 394   FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
 395   URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
 396   HASH:=$(PKG_BRCMSMAC_FW_HASH)
 397 endef
 398 $(eval $(call Download,brcmsmac))
 399
 400 define KernelPackage/brcmsmac
 401   $(call KernelPackage/mac80211/Default)
 402   TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
 403   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
 404   DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
 405   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
 406   AUTOLOAD:=$(call AutoProbe,brcmsmac)
 407   MENU:=1
 408 endef
 409
 410 define KernelPackage/brcmsmac/description
 411  Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
 412 endef
 413
 414 define KernelPackage/brcmsmac/config
 415   if PACKAGE_kmod-brcmsmac
 416
 417         config BRCMSMAC_USE_FW_FROM_WL
 418                 bool "Use firmware extracted from broadcom proprietary driver"
 419                 default y
 420                 help
 421                   Instead of using the official brcmsmac firmware a firmware
 422                   version 666.2 extracted from the proprietary Broadcom driver
 423                   is used. This is needed to get core rev 17 used in bcm4716
 424                   to work.
 425
 426                   If unsure, say Y.
 427
 428   endif
 429 endef
 430
 431
 432 define KernelPackage/brcmfmac
 433   $(call KernelPackage/mac80211/Default)
 434   TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
 435   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
 436   DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \
 437         +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \
 438         +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb
 439   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
 440   AUTOLOAD:=$(call AutoProbe,brcmfmac)
 441 endef
 442
 443 define KernelPackage/brcmfmac/description
 444  Kernel module for Broadcom IEEE802.11n USB Wireless cards
 445 endef
 446
 447 define KernelPackage/brcmfmac/config
 448   if PACKAGE_kmod-brcmfmac
 449
 450         config BRCMFMAC_SDIO
 451                 bool "Enable SDIO bus interface support"
 452                 default y if TARGET_brcm2708
 453                 default y if TARGET_sunxi
 454                 default n
 455                 help
 456                   Enable support for cards attached to an SDIO bus.
 457                   Select this option only if you are sure that your
 458                   board has a Broadcom wireless chip atacched to
 459                   that bus.
 460
 461         config BRCMFMAC_USB
 462                 bool "Enable USB bus interface support"
 463                 depends on USB_SUPPORT
 464                 default y
 465                 help
 466                   Supported USB connected chipsets:
 467                   BCM43235, BCM43236, BCM43238 (all in revision 3 only)
 468                   BCM43143, BCM43242, BCM43566, BCM43569
 469
 470         config BRCMFMAC_PCIE
 471                 bool "Enable PCIE bus interface support"
 472                 depends on PCI_SUPPORT
 473                 default y
 474                 help
 475                   Supported PCIe connected chipsets:
 476                   BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
 477
 478   endif
 479 endef
 480
 481
 482 define KernelPackage/b43/install
 483         rm -rf $(1)/lib/firmware/
 484 ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
 485         tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
 486 else
 487         tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
 488 endif
 489         $(INSTALL_DIR) $(1)/lib/firmware/
 490 ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
 491         $(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/"
 492         $(INSTALL_DIR) $(1)/lib/firmware/b43-open/
 493         $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw
 494         $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw
 495         $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw
 496 else
 497         b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
 498 endif
 499 ifneq ($(CONFIG_B43_FW_SQUASH),)
 500         b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43"
 501 endif
 502 endef
 503
 504 define KernelPackage/brcmsmac/install
 505         $(INSTALL_DIR) $(1)/lib/firmware/brcm
 506 ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y)
 507         tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)"
 508         b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT)
 509 endif
 510 endef