# - filepath
# - key (will be ignored in GUI, since a special key change dialog exists)
# - flags
-# - noise_params
+# - noise_params_2d
+# - noise_params_3d
+# - v3f
#
# `type_args` can be:
# * int:
# * flags:
# Flags are always separated by comma without spaces.
# - default possible_flags
-# * noise_params:
-# TODO: these are currently treated like strings
+# * noise_params_2d:
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# - default
+# * noise_params_3d:
+# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
+# - default
+# * v3f:
+# Format is (<X>, <Y>, <Z>)
+# - default
#
# Comments directly above a setting are bound to this setting.
# All other comments are ignored.
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
keymap_decrease_viewing_range_min (View range decrease key) key -
-# Key for printing debug stacks. Used for development.
-# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
-keymap_print_debug_stacks (Print stacks) key KEY_KEY_P
-
[Graphics]
[*In-Game]
# memory. Powers of 2 are recommended. Setting this higher than 1 may not
# have a visible effect unless bilinear/trilinear/anisotropic filtering is
# enabled.
-texture_min_size (Minimum texture size for filters) int 64
+# This is also used as the base node texture size for world-aligned
+# texture autoscaling.
+texture_min_size (Minimum texture size) int 64
# Experimental option, might cause visible spaces between blocks
# when set to higher number than 0.
# View distance in nodes.
viewing_range (Viewing range) int 100 20 4000
+# Camera near plane distance in nodes, between 0 and 0.5
+# Most users will not need to change this.
+# Increasing can reduce artifacting on weaker GPUs.
+# 0.1 = Default, 0.25 = Good value for weaker tablets.
+near_plane (Near plane) float 0.1 0 0.5
+
# Width component of the initial window size.
screen_w (Screen width) int 1024
fov (Field of view) int 72 30 160
# Field of view while zooming in degrees.
-# This requires the "zoom" privilege on the server.
+# Requires to be allowed by server-sided mods.
zoom_fov (Field of view for zoom) int 15 7 160
# Adjust the gamma encoding for the light tables. Higher numbers are brighter.
# - topbottom: split screen top/bottom.
# - sidebyside: split screen side by side.
# - pageflip: quadbuffer based 3d.
+# Note that the interlaced mode requires shaders to be enabled.
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,pageflip
# In-game chat console height, between 0.1 (10%) and 1.0 (100%).
# Crosshair alpha (opaqueness, between 0 and 255).
crosshair_alpha (Crosshair alpha) int 255 0 255
+# Maximum number of recent chat messages to show
+recent_chat_messages (Recent Chat Messages) int 6 2 20
+
# Whether node texture animations should be desynchronized per mapblock.
desynchronize_mapblock_texture_animation (Desynchronize block animation) bool true
# Makes all liquids opaque
opaque_water (Opaque liquids) bool false
+# Textures on a node may be aligned either to the node or to the world.
+# The former mode suits better things like machines, furniture, etc., while
+# the latter makes stairs and microblocks fit surroundings better.
+# However, as this possibility is new, thus may not be used by older servers,
+# this option allows enforcing it for certain node types. Note though that
+# that is considered EXPERIMENTAL and may not work properly.
+world_aligned_mode (World-aligned textures mode) enum enable disable,enable,force_solid,force_nodebox
+
+# World-aligned textures may be scaled to span several nodes. However,
+# the server may not send the scale you want, especially if you use
+# a specially-designed texture pack; with this option, the client tries
+# to determine the scale automatically basing on the texture size.
+# See also texture_min_size.
+# Warning: this option is EXPERIMENTAL!
+autoscale_mode (Autoscaling mode) enum disable disable,enable,force
+
# Show entity selection boxes
show_entity_selectionbox (Show entity selection boxes) bool true
# Delay showing tooltips, stated in milliseconds.
tooltip_show_delay (Tooltip delay) int 400
+# Append item name to tooltip.
+tooltip_append_itemname (Append item name) bool false
+
# Whether freetype fonts are used, requires freetype support to be compiled in.
freetype (Freetype fonts) bool true
sound_volume (Volume) float 0.7 0.0 1.0
+mute_sound (Mute sound) bool false
+
[Client]
[*Network]
# Note that the port field in the main menu overrides this setting.
remote_port (Remote port) int 30000 1 65535
-# Whether to support older servers before protocol version 25.
-# Enable if you want to connect to 0.4.12 servers and before.
-# Servers starting with 0.4.13 will work, 0.4.12-dev servers may work.
-# Disabling this option will protect your password better.
-send_pre_v25_init (Support older servers) bool false
-
# Save the map received by the client on disk.
enable_local_map_saving (Saving map received from server) bool false
[**Advanced]
# Maximum number of blocks that are simultaneously sent per client.
+# The maximum total count is calculated dynamically:
+# max_total = ceil((#clients + max_users) * per_client / 4)
max_simultaneous_block_sends_per_client (Maximum simultaneous block sends per client) int 10
-# Maximum number of blocks that are simultaneously sent in total.
-max_simultaneous_block_sends_server_total (Maximum simultaneous block sends total) int 40
-
# To reduce lag, block transfers are slowed down when a player is building something.
# This determines how long they are slowed down after placing or removing a node.
full_block_send_enable_min_time_from_building (Delay in sending blocks after building) float 2.0
# Whether to allow players to damage and kill each other.
enable_pvp (Player versus Player) bool true
+# Enable mod channels support.
+enable_mod_channels (Mod channels) bool false
+
# If this is set, players will always (re)spawn at the given position.
static_spawnpoint (Static spawnpoint) string
# Examples: 72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
time_speed (Time speed) int 72
+# Time of day when a new world is started, in millihours (0-23999).
+world_start_time (World start time) int 5250 0 23999
+
# Interval of saving important changes in the world, stated in seconds.
server_map_save_interval (Map save interval) float 5.3
# Global map generation attributes.
# In Mapgen v6 the 'decorations' flag controls all decorations except trees
# and junglegrass, in all other mapgens this flag controls all decorations.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations caves,dungeons,light,decorations,nocaves,nodungeons,nolight,nodecorations
[*Biome API temperature and humidity noise parameters]
# Temperature variation for biomes.
-mg_biome_np_heat (Heat noise) noise_params 50, 50, (1000, 1000, 1000), 5349, 3, 0.5, 2.0
+mg_biome_np_heat (Heat noise) noise_params_2d 50, 50, (1000, 1000, 1000), 5349, 3, 0.5, 2.0, eased
# Small-scale temperature variation for blending biomes on borders.
-mg_biome_np_heat_blend (Heat blend noise) noise_params 0, 1.5, (8, 8, 8), 13, 2, 1.0, 2.0
+mg_biome_np_heat_blend (Heat blend noise) noise_params_2d 0, 1.5, (8, 8, 8), 13, 2, 1.0, 2.0, eased
# Humidity variation for biomes.
-mg_biome_np_humidity (Humidity noise) noise_params 50, 50, (1000, 1000, 1000), 842, 3, 0.5, 2.0
+mg_biome_np_humidity (Humidity noise) noise_params_2d 50, 50, (1000, 1000, 1000), 842, 3, 0.5, 2.0, eased
# Small-scale humidity variation for blending biomes on borders.
-mg_biome_np_humidity_blend (Humidity blend noise) noise_params 0, 1.5, (8, 8, 8), 90003, 2, 1.0, 2.0
+mg_biome_np_humidity_blend (Humidity blend noise) noise_params_2d 0, 1.5, (8, 8, 8), 90003, 2, 1.0, 2.0, eased
[*Mapgen V5]
# Map generation attributes specific to Mapgen v5.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mgv5_spflags (Mapgen V5 specific flags) flags caverns caverns,nocaverns
[**Noises]
# Variation of biome filler depth.
-mgv5_np_filler_depth (Filler depth noise) noise_params 0, 1, (150, 150, 150), 261, 4, 0.7, 2.0
+mgv5_np_filler_depth (Filler depth noise) noise_params_2d 0, 1, (150, 150, 150), 261, 4, 0.7, 2.0, eased
# Variation of terrain vertical scale.
# When noise is < -0.55 terrain is near-flat.
-mgv5_np_factor (Factor noise) noise_params 0, 1, (250, 250, 250), 920381, 3, 0.45, 2.0
+mgv5_np_factor (Factor noise) noise_params_2d 0, 1, (250, 250, 250), 920381, 3, 0.45, 2.0, eased
# Y-level of average terrain surface.
-mgv5_np_height (Height noise) noise_params 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0
+mgv5_np_height (Height noise) noise_params_2d 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0, eased
# First of 2 3D noises that together define tunnels.
-mgv5_np_cave1 (Cave1 noise) noise_params 0, 12, (50, 50, 50), 52534, 4, 0.5, 2.0
+mgv5_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (50, 50, 50), 52534, 4, 0.5, 2.0
# Second of 2 3D noises that together define tunnels.
-mgv5_np_cave2 (Cave2 noise) noise_params 0, 12, (50, 50, 50), 10325, 4, 0.5, 2.0
+mgv5_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (50, 50, 50), 10325, 4, 0.5, 2.0
# 3D noise defining giant caverns.
-mgv5_np_cavern (Cavern noise) noise_params 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+mgv5_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
-# TODO
-# Noise parameters in group format, unsupported by advanced settings
-# menu but settable in minetest.conf.
-# See documentation of noise parameter formats in minetest.conf.example.
# 3D noise defining terrain.
-#mgv5_np_ground = {
-# offset = 0
-# scale = 40
-# spread = (80, 80, 80)
-# seed = 983240
-# octaves = 4
-# persistence = 0.55
-# lacunarity = 2.0
-# flags = "eased"
-#}
+mgv5_np_ground (Ground noise) noise_params_3d 0, 40, (80, 80, 80), 983240, 4, 0.55, 2.0, eased
[*Mapgen V6]
# The 'snowbiomes' flag enables the new 5 biome system.
# When the new biome system is enabled jungles are automatically enabled and
# the 'jungles' flag is ignored.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mgv6_spflags (Mapgen V6 specific flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
[**Noises]
# Y-level of lower terrain and lakebeds.
-mgv6_np_terrain_base (Terrain base noise) noise_params -4, 20, (250, 250, 250), 82341, 5, 0.6, 2.0
+mgv6_np_terrain_base (Terrain base noise) noise_params_2d -4, 20, (250, 250, 250), 82341, 5, 0.6, 2.0, eased
# Y-level of higher (cliff-top) terrain.
-mgv6_np_terrain_higher (Terrain higher noise) noise_params 20, 16, (500, 500, 500), 85039, 5, 0.6, 2.0
+mgv6_np_terrain_higher (Terrain higher noise) noise_params_2d 20, 16, (500, 500, 500), 85039, 5, 0.6, 2.0, eased
# Varies steepness of cliffs.
-mgv6_np_steepness (Steepness noise) noise_params 0.85, 0.5, (125, 125, 125), -932, 5, 0.7, 2.0
+mgv6_np_steepness (Steepness noise) noise_params_2d 0.85, 0.5, (125, 125, 125), -932, 5, 0.7, 2.0, eased
# Defines areas of 'terrain_higher' (cliff-top terrain).
-mgv6_np_height_select (Height select noise) noise_params 0.5, 1, (250, 250, 250), 4213, 5, 0.69, 2.0
+mgv6_np_height_select (Height select noise) noise_params_2d 0.5, 1, (250, 250, 250), 4213, 5, 0.69, 2.0, eased
# Varies depth of biome surface nodes.
-mgv6_np_mud (Mud noise) noise_params 4, 2, (200, 200, 200), 91013, 3, 0.55, 2.0
+mgv6_np_mud (Mud noise) noise_params_2d 4, 2, (200, 200, 200), 91013, 3, 0.55, 2.0, eased
# Defines areas with sandy beaches.
-mgv6_np_beach (Beach noise) noise_params 0, 1, (250, 250, 250), 59420, 3, 0.50, 2.0
+mgv6_np_beach (Beach noise) noise_params_2d 0, 1, (250, 250, 250), 59420, 3, 0.50, 2.0, eased
# Temperature variation for biomes.
-mgv6_np_biome (Biome noise) noise_params 0, 1, (500, 500, 500), 9130, 3, 0.50, 2.0
+mgv6_np_biome (Biome noise) noise_params_2d 0, 1, (500, 500, 500), 9130, 3, 0.50, 2.0, eased
# Variation of number of caves.
-mgv6_np_cave (Cave noise) noise_params 6, 6, (250, 250, 250), 34329, 3, 0.50, 2.0
+mgv6_np_cave (Cave noise) noise_params_2d 6, 6, (250, 250, 250), 34329, 3, 0.50, 2.0, eased
# Humidity variation for biomes.
-mgv6_np_humidity (Humidity noise) noise_params 0.5, 0.5, (500, 500, 500), 72384, 3, 0.50, 2.0
+mgv6_np_humidity (Humidity noise) noise_params_2d 0.5, 0.5, (500, 500, 500), 72384, 3, 0.50, 2.0, eased
# Defines tree areas and tree density.
-mgv6_np_trees (Trees noise) noise_params 0, 1, (125, 125, 125), 2, 4, 0.66, 2.0
+mgv6_np_trees (Trees noise) noise_params_2d 0, 1, (125, 125, 125), 2, 4, 0.66, 2.0, eased
# Defines areas where trees have apples.
-mgv6_np_apple_trees (Apple trees noise) noise_params 0, 1, (100, 100, 100), 342902, 3, 0.45, 2.0
+mgv6_np_apple_trees (Apple trees noise) noise_params_2d 0, 1, (100, 100, 100), 342902, 3, 0.45, 2.0, eased
[*Mapgen V7]
# Map generation attributes specific to Mapgen v7.
# 'ridges' enables the rivers.
-# 'biomerepeat' causes surface biomes to repeat in the floatlands.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
-mgv7_spflags (Mapgen V7 specific flags) flags mountains,ridges,nofloatlands,caverns,biomerepeat mountains,ridges,floatlands,caverns,biomerepeat,nomountains,noridges,nofloatlands,nocaverns,nobiomerepeat
+mgv7_spflags (Mapgen V7 specific flags) flags mountains,ridges,nofloatlands,caverns mountains,ridges,floatlands,caverns,nomountains,noridges,nofloatlands,nocaverns
# Y of mountain density gradient zero level. Used to shift mountains vertically.
mgv7_mount_zero_level (Mountain zero level) int 0
[**Noises]
# Y-level of higher (cliff-top) terrain.
-mgv7_np_terrain_base (Terrain base noise) noise_params 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0
+mgv7_np_terrain_base (Terrain base noise) noise_params_2d 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0, eased
# Y-level of lower terrain and lakebeds.
-mgv7_np_terrain_alt (Terrain alt noise) noise_params 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0
+mgv7_np_terrain_alt (Terrain alt noise) noise_params_2d 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0, eased
# Varies roughness of terrain.
# Defines the 'persistence' value for terrain_base and terrain_alt noises.
-mgv7_np_terrain_persist (Terrain persistence noise) noise_params 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0
+mgv7_np_terrain_persist (Terrain persistence noise) noise_params_2d 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0, eased
# Defines areas of higher (cliff-top) terrain and affects steepness of cliffs.
-mgv7_np_height_select (Height select noise) noise_params -8, 16, (500, 500, 500), 4213, 6, 0.7, 2.0
+mgv7_np_height_select (Height select noise) noise_params_2d -8, 16, (500, 500, 500), 4213, 6, 0.7, 2.0, eased
# Variation of biome filler depth.
-mgv7_np_filler_depth (Filler depth noise) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
+mgv7_np_filler_depth (Filler depth noise) noise_params_2d 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0, eased
# Variation of maximum mountain height (in nodes).
-mgv7_np_mount_height (Mountain height noise) noise_params 256, 112, (1000, 1000, 1000), 72449, 3, 0.6, 2.0
+mgv7_np_mount_height (Mountain height noise) noise_params_2d 256, 112, (1000, 1000, 1000), 72449, 3, 0.6, 2.0, eased
# Defines large-scale river channel structure.
-mgv7_np_ridge_uwater (Ridge underwater noise) noise_params 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0
+mgv7_np_ridge_uwater (Ridge underwater noise) noise_params_2d 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0, eased
# Defines areas of floatland smooth terrain.
# Smooth floatlands occur when noise > 0.
-mgv7_np_floatland_base (Floatland base noise) noise_params -0.6, 1.5, (600, 600, 600), 114, 5, 0.6, 2.0
+mgv7_np_floatland_base (Floatland base noise) noise_params_2d -0.6, 1.5, (600, 600, 600), 114, 5, 0.6, 2.0, eased
# Variation of hill height and lake depth on floatland smooth terrain.
-mgv7_np_float_base_height (Floatland base height noise) noise_params 48, 24, (300, 300, 300), 907, 4, 0.7, 2.0
+mgv7_np_float_base_height (Floatland base height noise) noise_params_2d 48, 24, (300, 300, 300), 907, 4, 0.7, 2.0, eased
# 3D noise defining mountain structure and height.
# Also defines structure of floatland mountain terrain.
-mgv7_np_mountain (Mountain noise) noise_params -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
+mgv7_np_mountain (Mountain noise) noise_params_3d -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
# 3D noise defining structure of river canyon walls.
-mgv7_np_ridge (Ridge noise) noise_params 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
+mgv7_np_ridge (Ridge noise) noise_params_3d 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
# 3D noise defining giant caverns.
-mgv7_np_cavern (Cavern noise) noise_params 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+mgv7_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
# First of 2 3D noises that together define tunnels.
-mgv7_np_cave1 (Cave1 noise) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgv7_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
# Second of 2 3D noises that together define tunnels.
-mgv7_np_cave2 (Cave2 noise) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+mgv7_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
[*Mapgen Carpathian]
# Map generation attributes specific to Mapgen Carpathian.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mgcarpathian_spflags (Mapgen Carpathian specific flags) flags caverns caverns,nocaverns
[**Noises]
# 2D noise that defines the base ground level.
-mgcarpathian_np_base (Base ground noise) noise_params 12, 1, (2557, 2557, 2557), 6538, 4, 0.8, 0.5
+mgcarpathian_np_base (Base ground noise) noise_params_2d 12, 1, (2557, 2557, 2557), 6538, 4, 0.8, 0.5, eased
# Variation of biome filler depth.
-mgcarpathian_np_filler_depth (Filler depth noise) noise_params 0, 1, (128, 128, 128), 261, 3, 0.7, 2.0
+mgcarpathian_np_filler_depth (Filler depth noise) noise_params_2d 0, 1, (128, 128, 128), 261, 3, 0.7, 2.0, eased
-# First of 4 3D noises that together define hill/mountain range height.
-mgcarpathian_np_height1 (Hilliness1 noise) noise_params 0, 5, (251, 251, 251), 9613, 5, 0.5, 2.0
+# First of 4 2D noises that together define hill/mountain range height.
+mgcarpathian_np_height1 (Hilliness1 noise) noise_params_2d 0, 5, (251, 251, 251), 9613, 5, 0.5, 2.0, eased
-# Second of 4 3D noises that together define hill/mountain range height.
-mgcarpathian_np_height2 (Hilliness2 noise) noise_params 0, 5, (383, 383, 383), 1949, 5, 0.5, 2.0
+# Second of 4 2D noises that together define hill/mountain range height.
+mgcarpathian_np_height2 (Hilliness2 noise) noise_params_2d 0, 5, (383, 383, 383), 1949, 5, 0.5, 2.0, eased
-# Third of 4 3D noises that together define hill/mountain range height.
-mgcarpathian_np_height3 (Hilliness3 noise) noise_params 0, 5, (509, 509, 509), 3211, 5, 0.5, 2.0
+# Third of 4 2D noises that together define hill/mountain range height.
+mgcarpathian_np_height3 (Hilliness3 noise) noise_params_2d 0, 5, (509, 509, 509), 3211, 5, 0.5, 2.0, eased
-# Fourth of 4 3D noises that together define hill/mountain range height.
-mgcarpathian_np_height4 (Hilliness4 noise) noise_params 0, 5, (631, 631, 631), 1583, 5, 0.5, 2.0
+# Fourth of 4 2D noises that together define hill/mountain range height.
+mgcarpathian_np_height4 (Hilliness4 noise) noise_params_2d 0, 5, (631, 631, 631), 1583, 5, 0.5, 2.0, eased
# 2D noise that controls the size/occurance of rolling hills.
-mgcarpathian_np_hills_terrain (Rolling hills spread noise) noise_params 1, 1, (1301, 1301, 1301), 1692, 3, 0.5, 2.0
+mgcarpathian_np_hills_terrain (Rolling hills spread noise) noise_params_2d 1, 1, (1301, 1301, 1301), 1692, 3, 0.5, 2.0, eased
# 2D noise that controls the size/occurance of ridged mountain ranges.
-mgcarpathian_np_ridge_terrain (Ridge mountain spread noise) noise_params 1, 1, (1889, 1889, 1889), 3568, 3, 0.5, 2.0
+mgcarpathian_np_ridge_terrain (Ridge mountain spread noise) noise_params_2d 1, 1, (1889, 1889, 1889), 3568, 3, 0.5, 2.0, eased
# 2D noise that controls the size/occurance of step mountain ranges.
-mgcarpathian_np_step_terrain (Step mountain spread noise) noise_params 1, 1, (1889, 1889, 1889), 4157, 3, 0.5, 2.0
+mgcarpathian_np_step_terrain (Step mountain spread noise) noise_params_2d 1, 1, (1889, 1889, 1889), 4157, 3, 0.5, 2.0, eased
# 2D noise that controls the shape/size of rolling hills.
-mgcarpathian_np_hills (Rolling hill size noise) noise_params 0, 3, (257, 257, 257), 6604, 6, 0.5, 2.0
+mgcarpathian_np_hills (Rolling hill size noise) noise_params_2d 0, 3, (257, 257, 257), 6604, 6, 0.5, 2.0, eased
# 2D noise that controls the shape/size of ridged mountains.
-mgcarpathian_np_ridge_mnt (Ridged mountain size noise) noise_params 0, 12, (743, 743, 743), 5520, 6, 0.7, 2.0
+mgcarpathian_np_ridge_mnt (Ridged mountain size noise) noise_params_2d 0, 12, (743, 743, 743), 5520, 6, 0.7, 2.0, eased
# 2D noise that controls the shape/size of step mountains.
-mgcarpathian_np_step_mnt (Step mountain size noise) noise_params 0, 8, (509, 509, 509), 2590, 6, 0.6, 2.0
+mgcarpathian_np_step_mnt (Step mountain size noise) noise_params_2d 0, 8, (509, 509, 509), 2590, 6, 0.6, 2.0, eased
# 3D noise for mountain overhangs, cliffs, etc. Usually small variations.
-mgcarpathian_np_mnt_var (Mountain variation noise) noise_params 0, 1, (499, 499, 499), 2490, 5, 0.6, 2.0
+mgcarpathian_np_mnt_var (Mountain variation noise) noise_params_3d 0, 1, (499, 499, 499), 2490, 5, 0.55, 2.0
# First of 2 3D noises that together define tunnels.
-mgcarpathian_np_cave1 (Cave1 noise) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgcarpathian_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
# Second of 2 3D noises that together define tunnels.
-mgcarpathian_np_cave2 (Cave2 noise) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+mgcarpathian_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
# 3D noise defining giant caverns.
-mgcarpathian_np_cavern (Cavern noise) noise_params 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
+mgcarpathian_np_cavern (Cavern noise) noise_params_3d 0, 1, (384, 128, 384), 723, 5, 0.63, 2.0
[*Mapgen Flat]
# Map generation attributes specific to Mapgen flat.
# Occasional lakes and hills can be added to the flat world.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mgflat_spflags (Mapgen Flat specific flags) flags nolakes,nohills lakes,hills,nolakes,nohills
[**Noises]
# Defines location and terrain of optional hills and lakes.
-mgflat_np_terrain (Terrain noise) noise_params 0, 1, (600, 600, 600), 7244, 5, 0.6, 2.0
+mgflat_np_terrain (Terrain noise) noise_params_2d 0, 1, (600, 600, 600), 7244, 5, 0.6, 2.0, eased
# Variation of biome filler depth.
-mgflat_np_filler_depth (Filler depth noise) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
+mgflat_np_filler_depth (Filler depth noise) noise_params_2d 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0, eased
# First of 2 3D noises that together define tunnels.
-mgflat_np_cave1 (Cave1 noise) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgflat_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
# Second of 2 3D noises that together define tunnels.
-mgflat_np_cave2 (Cave2 noise) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+mgflat_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
[*Mapgen Fractal]
[**Noises]
# Y-level of seabed.
-mgfractal_np_seabed (Seabed noise) noise_params -14, 9, (600, 600, 600), 41900, 5, 0.6, 2.0
+mgfractal_np_seabed (Seabed noise) noise_params_2d -14, 9, (600, 600, 600), 41900, 5, 0.6, 2.0, eased
# Variation of biome filler depth.
-mgfractal_np_filler_depth (Filler depth noise) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
+mgfractal_np_filler_depth (Filler depth noise) noise_params_2d 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0, eased
# First of 2 3D noises that together define tunnels.
-mgfractal_np_cave1 (Cave1 noise) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgfractal_np_cave1 (Cave1 noise) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
# Second of 2 3D noises that together define tunnels.
-mgfractal_np_cave2 (Cave2 noise) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+mgfractal_np_cave2 (Cave2 noise) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
[*Mapgen Valleys]
# 'altitude_chill' makes higher elevations colder, which may cause biome issues.
# 'humid_rivers' modifies the humidity around rivers and in areas where water would tend to pool,
# it may interfere with delicately adjusted biomes.
-# Flags that are not specified in the flag string are not modified from the default.
+# Flags that are not enabled are not modified from the default.
# Flags starting with 'no' are used to explicitly disable them.
mg_valleys_spflags (Mapgen Valleys specific flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
[**Noises]
# Caves and tunnels form at the intersection of the two noises
-mgvalleys_np_cave1 (Cave noise #1) noise_params 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
+mgvalleys_np_cave1 (Cave noise #1) noise_params_3d 0, 12, (61, 61, 61), 52534, 3, 0.5, 2.0
# Caves and tunnels form at the intersection of the two noises
-mgvalleys_np_cave2 (Cave noise #2) noise_params 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
+mgvalleys_np_cave2 (Cave noise #2) noise_params_3d 0, 12, (67, 67, 67), 10325, 3, 0.5, 2.0
# The depth of dirt or other filler
-mgvalleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
+mgvalleys_np_filler_depth (Filler Depth) noise_params_2d 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0, eased
# Massive caves form here.
-mgvalleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
+mgvalleys_np_massive_caves (Massive cave noise) noise_params_3d 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
# River noise -- rivers occur close to zero
-mgvalleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
+mgvalleys_np_rivers (River Noise) noise_params_2d 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0, eased
# Base terrain height
-mgvalleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
+mgvalleys_np_terrain_height (Terrain Height) noise_params_2d -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0, eased
# Raises terrain to make valleys around the rivers
-mgvalleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
+mgvalleys_np_valley_depth (Valley Depth) noise_params_2d 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0, eased
# Slope and fill work together to modify the heights
-mgvalleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
+mgvalleys_np_inter_valley_fill (Valley Fill) noise_params_3d 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
# Amplifies the valleys
-mgvalleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
+mgvalleys_np_valley_profile (Valley Profile) noise_params_2d 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0, eased
# Slope and fill work together to modify the heights
-mgvalleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
+mgvalleys_np_inter_valley_slope (Valley Slope) noise_params_2d 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0, eased
[*Advanced]