remove unused magpie_mem.h
authorOleksij Rempel <linux@rempel-privat.de>
Thu, 3 Nov 2016 10:37:12 +0000 (11:37 +0100)
committerOleksij Rempel <linux@rempel-privat.de>
Thu, 3 Nov 2016 20:27:01 +0000 (21:27 +0100)
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h [deleted file]

diff --git a/target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h b/target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h
deleted file mode 100755 (executable)
index 651f94c..0000000
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright (c) 2013 Qualcomm Atheros, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted (subject to the limitations in the
- * disclaimer below) provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the
- *    distribution.
- *
- *  * Neither the name of Qualcomm Atheros nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
- * GRANTED BY THIS LICENSE.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
- * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-/*************************************************************************/
-/*  Copyright (c) 2006 Atheros Communications, Inc., All Rights Reserved */
-/*                                                                       */
-/*  Module Name : mem_addrs.h                                            */
-/*                                                                       */
-/*  Abstract                                                             */
-/*      This file contains definition of the memory related information. */
-/*                                                                       */
-/*  NOTES                                                                */
-/*      None                                                             */
-/*                                                                       */
-/*************************************************************************/
-
-#ifndef _MEM_ADDRS_H_
-#define _MEM_ADDRS_H_
-
-#define SYS_ROM_BLOCK_SIZE             (32*1024)
-#if MAGPIE_FPGA_RAM_256K == 1
-#define SYS_ROM_BLOCK_NUM                   2         //ram 256K version is also rom 64k version
-#else
-#define SYS_ROM_BLOCK_NUM               3
-#endif
-#define SYS_ROM_SIZE                    (SYS_ROM_BLOCK_SIZE*SYS_ROM_BLOCK_NUM)
-
-#if MAGPIE_FPGA_RAM_256K == 1
-#define SYS_RAM_BLOCK_SIZE                  64*1024
-#else
-#define SYS_RAM_BLOCK_SIZE                  40*1024
-#endif
-
-#define SYS_RAM_BLOCK_NUM               4
-#define SYS_RAM_SZIE                    (SYS_RAM_BLOCK_SIZE*SYS_RAM_BLOCK_NUM)
-
-/* instruction port area */
-#define SYS_I_R0M_REGION_0_BASE         0x8e0000
-
-#define SYS_I_RAM_REGION_0_BASE         0x900000
-#define SYS_I_RAM_REGION_1_BASE         (SYS_I_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_I_RAM_REGION_2_BASE         (SYS_I_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_I_RAM_REGION_3_BASE         (SYS_I_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE)
-
-/* data port area */
-#define SYS_D_R0M_REGION_0_BASE         0x4e0000
-
-#define SYS_D_RAM_REGION_0_BASE         0x500000
-#define SYS_D_RAM_REGION_1_BASE         (SYS_D_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_D_RAM_REGION_2_BASE         (SYS_D_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE)
-#define SYS_D_RAM_REGION_3_BASE         (SYS_D_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE)
-
-/* data and bss section */
-
-#define SYS_D_RAM_DATA_BSS              SYS_D_RAM_REGION_0_BASE
-#define SYS_D_RAM_DATA_BSS_SZ           SYS_RAM_BLOCK_SIZE
-#define SYS_D_RAM_STACK_SIZE                (2*1024)
-
-/////////////////////////////////////////////////////////////////////////////////////
-#define EEPROM_CTRL_BASE                    0x10ff0000
-#define EEPROM_ADDR_BASE                    (EEPROM_CTRL_BASE+0x2000)
-
-#define EEPROM_SIZE                         0xfff   // 4K addressing space, each has 2 bytes, (a half word)
-#define EEPROM_START_OFFSET                 0       // THIS SHOULD NOT MODIFY
-#define EEPROM_END_OFFSET                   (EEPROM_START_OFFSET+EEPROM_SIZE)   // end of the eeprom offset
-
-/////////////////////////////////////////////////////////////////////////////////////
-#define EEPROM_USB_DESCRIPTOR_ADDR          ((uint32_t)&_bss_end)  // address at RAM to put descriptor data
-#define USB_DESC_START_ADDR                 0x780
-#define USB_DESCRIPTOR_ADDR                 USB_DESC_START_ADDR     // eeprom offset to sotre the descriptor data
-
-#define USB_DESC_IN_EEPROM_SIZE             2                       // indicate eeprom is exist in eeprom
-#define USB_DEVICE_DESCRIPTOR_SIZE          16                      // Device Descriptor
-#define USB_STRING00_DESCRIPTOR_SIZE        6                       // 16 half word
-#define USB_STRING10_DESCRIPTOR_SIZE        12                      // Manufacture data
-#define USB_STRING20_DESCRIPTOR_SIZE        16                      // Product/Company data
-#define USB_STRING30_DESCRIPTOR_SIZE        8                       // Serial Number
-
-#define USB_DEVICE_PID_SIZE                 1                       // PID SIZE, 1 halfword offset
-#define USB_DEVICE_VID_SIZE                 1                       // VID SIZE, 1 halfword offset
-
-#define USB_DESC_IN_EEPROM_FLAG_OFFSET      USB_DESCRIPTOR_ADDR
-#define USB_DEVICE_DESCRIPTOR_OFFSET        (USB_DESC_IN_EEPROM_FLAG_OFFSET+USB_DESC_IN_EEPROM_SIZE)
-#define USB_STRING00_DESCRIPTOR_OFFSET      (USB_DEVICE_DESCRIPTOR_OFFSET+USB_DEVICE_DESCRIPTOR_SIZE)
-#define USB_STRING10_DESCRIPTOR_OFFSET      (USB_STRING00_DESCRIPTOR_OFFSET+USB_STRING00_DESCRIPTOR_SIZE)
-#define USB_STRING20_DESCRIPTOR_OFFSET      (USB_STRING10_DESCRIPTOR_OFFSET+USB_STRING10_DESCRIPTOR_SIZE)
-#define USB_STRING30_DESCRIPTOR_OFFSET      (USB_STRING20_DESCRIPTOR_OFFSET+USB_STRING20_DESCRIPTOR_SIZE)
-
-#define USB_DEVICE_VID_OFFSET               (USB_DEVICE_DESCRIPTOR_OFFSET+4)
-#define USB_DEVICE_PID_OFFSET               (USB_DEVICE_VID_OFFSET+USB_DEVICE_VID_SIZE)
-
-#define USB_DESC_IN_EEPROM_FLAG_ADDR        EEPROM_USB_DESCRIPTOR_ADDR
-#define USB_DEVICE_DESCRIPTOR_ADDR          (USB_DESC_IN_EEPROM_FLAG_ADDR+(USB_DESC_IN_EEPROM_SIZE*2))
-#define USB_STRING00_DESCRIPTOR_ADDR        (USB_DEVICE_DESCRIPTOR_ADDR+(USB_DEVICE_DESCRIPTOR_SIZE*2))
-#define USB_STRING10_DESCRIPTOR_ADDR        (USB_STRING00_DESCRIPTOR_ADDR+(USB_STRING00_DESCRIPTOR_SIZE*2))
-#define USB_STRING20_DESCRIPTOR_ADDR        (USB_STRING10_DESCRIPTOR_ADDR+(USB_STRING10_DESCRIPTOR_SIZE*2))
-#define USB_STRING30_DESCRIPTOR_ADDR        (USB_STRING20_DESCRIPTOR_ADDR+(USB_STRING20_DESCRIPTOR_SIZE*2))
-
-#define USB_DEVICE_VID_ADDR                 (USB_DEVICE_DESCRIPTOR_ADDR+4)
-#define USB_DEVICE_PID_ADDR                 (USB_DEVICE_VID_ADDR+USB_DEVICE_VID_SIZE)
-
-#define USB_DESC_IN_EEP_PATTERN             0x41544852  //ATHR
-
-/****************************** patch in eeprom *****************************************/
-#define ROM_PATCH_EEPROM_SIZE                  2                       // 4 bytes
-
-#define ROM_PATCH_EEPROM_OFFSET         0xfc
-#define ROM_PATCH_BUF_ADDR              SYS_D_RAM_REGION_3_BASE
-
-#endif /* _MEM_ADDRS_H_ */