-# GL-INet AR300M
+# GL.iNet AR300M
## Hardware Specs
## Flashing from factory
-### Using the factory web UI
+### Using GL.iNet's U-boot-mod and web UI
1) Set computer IP address to 192.168.1.2
3) Press and hold the reset button, and power on the router by plugging in the power
-3) Wait until the LED flashes before releasing the reset button.
+4) Wait until the LED flashes once and red LED flashes 5 times before releasing the reset button.
-4) Open IP address in the browser 192.168.1.1
+5) Open IP address in the browser 192.168.1.1
-5) Flash the appropriate image through the gui
+6) Select the .img for NAND and .bin for NOR
## Tested
* This router is dual flash and stock uboot attempts to boot nand flash first.
-* NOR flash uses .bin image and Nand flash uses .img image.
+* NOR flash uses .bin image and NAND flash uses .img image.
+
+* Use librecmc-ar71xx-nand-gl-ar300m-squashfs-sysupgrade.tar to update NAND installations
* Default router ip is 192.168.10.1