oweals/u-boot.git
2018-10-26 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
2018-10-25 Tom RiniMerge tag 'u-boot-imx-20181025' of git://git.denx.de...
2018-10-25 Peng Fanarm: dts: imx8qxp: fix build warining
2018-10-25 Peng Fanimx: mkimage: avoid stop CI when required files not...
2018-10-24 Anatolij Gustschinnet: fec_mxc: add support for i.MX8X
2018-10-24 Baruch Siachnet: mvpp2: increase PHY reset pulse
2018-10-24 Baruch Siachnet: mvpp2: fix polarity of PHY reset signal
2018-10-24 Priyanka Jainnet/phy: Add phy-id for IN112525_S03
2018-10-24 Martin Fuzzeynet: dm: fec: Obtain the transceiver type from the DT
2018-10-24 Martin Fuzzeynet: dm: fec: Support the phy-supply binding
2018-10-24 Martin Fuzzeynet: dm: fec: Fix phy-reset-duration clamping and defaults
2018-10-24 Martin Fuzzeynet: dm: fec: Fix time unit error in phy-reset-duration
2018-10-24 Jeremy Gebbennet: phy: aquantia: autodetect if firmware needs to...
2018-10-24 Jeremy Gebbennet: phy: aquantia: add firmware loading support
2018-10-24 Jeremy Gebbenconfigs: migrate CONFIG_PHY_AQUANTIA to Kconfig
2018-10-24 Pankaj Bansalmiiphy: Add function to retrieve MDIO bus list head
2018-10-24 Hector Palacioscmd: mii: don't check address for 'device' subcommand
2018-10-24 Fabio Estevamwarp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig
2018-10-24 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-samsung
2018-10-23 Tom Rinitravis: Rework Freescale ARM jobs a bit
2018-10-23 Dirk MeulARM: Samsung: Add Exynos5422-based Odroid HC2 support
2018-10-22 Simon Glassbinman: Add a test for Intel reference code
2018-10-22 Tom RiniMerge git://git.denx.de/u-boot-x86
2018-10-22 Bernhard Messerklingerserial: mxc: Add match string for i.mx6 quad/dual lite...
2018-10-22 Sam Protsenkoarm: ti: boot: Remove environment partition
2018-10-22 Cédric Le Goaterwatchdog: aspeed: restore default value of reset_mask
2018-10-22 Adam FordARM: omap3_logic: Add NOR Flash Support for SOM-LV
2018-10-22 Meul, Dirkarm: udoo: Convert to distro config
2018-10-22 Heinrich Schuchardttest: overlay: add missing include
2018-10-22 Bin Mengnand: atmel: Initialize pmecc smu with correct size
2018-10-22 Eugen Hristevconfigs: sama5d2_ptc_ek: add default bootargs for MMC...
2018-10-22 Eugen Hristevconfigs: sama5d2_ptc_ek: add default bootargs for NAND...
2018-10-22 Eugen Hristevconfigs: sama5d2_xplained: enable w1 and overlay for...
2018-10-22 Eugen Hristevconfigs: sama5d27_som1_ek: enable w1 and overlay for...
2018-10-22 Eugen Hristevconfigs: at91: sama5: enable CMD_IMI
2018-10-22 Eugen Hristevconfigs: at91: sam9x5: added FIT and iminfo support
2018-10-22 Eugen Hristevboard: at91sam9x5: add environment var for cpu type
2018-10-22 Adam FordARM: omap3logic: Fix MMC name
2018-10-22 Adam FordARM: omap3logic: Specify DM serial driver as omap_serial
2018-10-22 Adam FordARM: omap3logic: Encapsulate the MUSB functions in...
2018-10-22 Adam FordARM: omap3_logic.c: Optimize DDR timings based on OMAP3...
2018-10-22 Adam FordARM: da850evm_direct_nor: Remove DM_I2C_COMPAT
2018-10-22 Rui Miguel... warp7: configs: add bl33 defconfig
2018-10-22 Rui Miguel... warp7: include: configs: set skip low level init
2018-10-22 Rui Miguel... optee: adjust dependencies and default values for dram
2018-10-22 Rui Miguel... imx: mx7: avoid some initialization if low level is...
2018-10-22 Anatolij Gustschini2c: imx_lpi2c: fix typo and register base address...
2018-10-22 Xiaoliang YangKconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig
2018-10-22 Dan Cimpocaboard: ge: bx50v3: fix initialization of i2c bus0
2018-10-22 Ian Rayboard: ge: bx50v3: b{4,6}50v3 modeline
2018-10-22 Ian Rayboard: ge: bx50v3: correct LDB clock
2018-10-22 Fabien Lahoudereboard: ge: bx50v3: Change maintainer
2018-10-22 Breno Matheus... doc: imx: Improve i.MX documentation naming
2018-10-22 Breno Matheus... doc: imx: misc: Reorganize miscellaneous documentation
2018-10-22 Breno Matheus... doc: imx: hab: Reorganize High Assurance Boot documentation
2018-10-22 Breno Matheus... doc: imx: Reorganize i.MX SoC common documentation
2018-10-22 Breno Matheus... doc: imx: mkimage: reorganize i.MX mkimage documentation
2018-10-22 Breno Matheus... doc: imx: Move SPD related info to the appropriate doc
2018-10-22 Breno Matheus... doc: imx: reorganize i.MX documentation
2018-10-22 Peng Fanimx: imx8qxp_mek: update to build image in U-Boot
2018-10-22 Peng Fanarm: imx: include imx8image support
2018-10-22 Peng Fantools: add i.MX8/8X image support
2018-10-22 Peng Fanimx: add i.MX8QXP MEK board support
2018-10-22 Peng Fanarm: dts: introduce dtsi for i.MX8QXP
2018-10-22 Peng Fanmmc: fsl_esdhc: add uclass clk support
2018-10-22 Ye Lifsl_esdhc: Update usdhc driver to support i.MX8
2018-10-22 Peng Fanserial: lpuart: support uclass clk api
2018-10-22 Ye Liserial: lpuart: Enable RX and TX FIFO
2018-10-22 Peng Fanserial_lpuart: Update lpuart driver to support i.MX8
2018-10-22 Peng Fanclk: imx: add clk driver for i.MX8QXP
2018-10-22 Peng Fanpower: Add power domain driver for i.MX8
2018-10-22 Peng Fanpinctrl: Add pinctrl driver for i.MX8
2018-10-22 Peng Fangpio: mxc_gpio: add support for i.MX8
2018-10-22 Peng Fanimx8: add dummy clock
2018-10-22 Peng Fanimx8: add iomux configuration api
2018-10-22 Anatolij Gustschinimx8: cpu: add uclass based CPU driver
2018-10-22 Anatolij Gustschinimx8: cpu: add function for reading FEC MAC from fuse
2018-10-22 Peng Fanimx8: add arch_cpu_init arch_cpu_init_dm
2018-10-22 Peng Fanimx8: add mmu and dram related functions
2018-10-22 Peng Fanimx8: implement mmc_get_env_dev
2018-10-22 Peng Fanimx8: add boot device detection
2018-10-22 Peng Fanimx8: add basic cpu support
2018-10-22 Peng Fanarmv8: add cpu core helper functions
2018-10-22 Peng Fanimx: add i.MX8 cpu type
2018-10-22 Peng Fanimx8: pins: include i.MX8QXP pin header when CONFIG_IMX...
2018-10-22 Peng Fanimx8: add imx-regs header file
2018-10-22 Peng Fanimx: boot_mode: Add FLEXSPI boot entry
2018-10-22 Peng Fanmisc: imx8: add scfw api impementation
2018-10-22 Peng Fanmisc: add i.MX8 misc driver
2018-10-22 Peng Fanarm: global_data: add scu_dev for i.MX8
2018-10-22 Peng Fanarm: build mach-imx for i.MX8
2018-10-22 Peng Fanimx: add Kconfig entry for i.MX8QXP
2018-10-22 Peng Fanimx8: add scfw macro definition
2018-10-22 Peng Fandt-bindings: soc: add i.MX8QXP pm and rsrc definition
2018-10-22 Peng Fandt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP...
2018-10-22 Peng Fandt-bindings: pinctrl: add i.MX8QXP pads definition
2018-10-22 Bin Mengtravis: Add qemu-x86_64 target for test.py testing
2018-10-22 Bin Mengtravis: Update to use QEMU 3.0.0 for testing
2018-10-22 Bin Mengtravis: Generate grub_x64.efi for qemu-x86_64
2018-10-22 Bin Mengx86: quark: Specify X86_TSC_TIMER_EARLY_FREQ
next