oweals/u-boot.git
2018-01-24 Jaehoon Chungmmc: fix to assign to correct clock value when clock...
2018-01-24 Jaehoon Chungconfigs: odroid-xu3: enable the configs relevant to...
2018-01-24 Jaehoon Chungpower: pmic: s2mps11: probe the regulator driver
2018-01-24 Jaehoon Chungpower: regulator: s2mps11: add a regulator driver for...
2018-01-22 Benoît Thébaudeaummc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
2018-01-22 Jaehoon Chungmmc: fix the wrong disabling clock
2018-01-22 Masahiro Yamadammc: sdhci: change data transfer failure into debug...
2018-01-22 Masahiro Yamadammc: sdhci-cadence: add HS200 support
2018-01-22 Masahiro Yamadammc: sdhci-cadence: call mmc_of_parse()
2018-01-22 Masahiro Yamadammc: sdhci-cadence: use bitfield access macros for...
2018-01-22 Masahiro Yamadammc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()
2018-01-22 Masahiro Yamadammc: let mmc_of_parse() fail for insane bus-width value
2018-01-22 Masahiro Yamadammc: do not overwrite cfg->f_max if "max-frequency...
2018-01-22 Masahiro Yamadadm: add dev_read_u32()
2018-01-20 Tom RiniMerge git://git.denx.de/u-boot-marvell
2018-01-19 Tom RiniMerge git://git.denx.de/u-boot-arc
2018-01-19 Faiz Abbasconfigs: keystone2: env: Fix burn_uboot_spi command
2018-01-19 Tom Rinicheckpatch: Ignore 'short' Kconfig help entries
2018-01-19 Tuomas Tynkkynenpowerpc: Drop unreferenced CONFIG_* defines
2018-01-19 Patrice Chotardconfigs: stm32: move config flag from defconfig to...
2018-01-19 Patrice Chotardserial: stm32: Rename serial_stm32x7.c to serial_stm32.c
2018-01-19 Tuomas Tynkkynenm68k: Drop unreferenced CONFIG_* defines
2018-01-19 Tuomas Tynkkynennds32: Drop unreferenced CONFIG_ADP_AG101P
2018-01-19 Tuomas Tynkkynenpcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros
2018-01-19 Tuomas TynkkynenTravis-CI: Add job for running test.py on qemu_arm64
2018-01-19 Tuomas TynkkynenTravis-CI: Download ARM64 version of GRUB as well
2018-01-19 Tuomas TynkkynenARM: Document AArch64 version of qemu-arm
2018-01-19 Tuomas TynkkynenARM: qemu-arm: Add support for AArch64
2018-01-19 Andrew F. Davisarm: mach-omap2: Remove secure certificate name printing
2018-01-19 Madan Srinivasarm: am33xx: security: Fix size calculation on header
2018-01-19 Drew Moseleyrpi_0_w: Add configs consistent with RpI3
2018-01-19 Derald D. WoodsARM: omap3: evm: Add kernel image loading from UBIFS...
2018-01-19 Heinrich Schuchardtboard_r: remove superfluous #ifdef CONFIG_PRAM
2018-01-19 Tom RiniGPIO: tca642x: Rework to not include commands in SPL
2018-01-19 Tom RiniGPIO: pca953x: Rework to not include commands in SPL
2018-01-19 Klaus Gogercmd: pmic: update help description
2018-01-19 Heinrich Schuchardtfs/fat: remove distractive message in file_fat_read_at()
2018-01-19 Heinrich Schuchardtfs: remove distractive message in fs_read()
2018-01-19 Adam FordDA850evm: Remove dead code
2018-01-19 Derald D. WoodsARM: dts: omap3-beagle{-xm}: Enable DM and devicetree...
2018-01-19 Derald D. WoodsARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard
2018-01-19 Lokesh Vutlaenv: ti: Select dtb name for dra76x and am574
2018-01-19 Lokesh VutlaARM: dts: am574x-idk: Add initial support
2018-01-19 Lokesh Vutlaboard: ti: am57xx: Enable CMD_DDR3
2018-01-19 Lokesh Vutlaboard: ti: am574x-idk: Update pinmux using latest PMT
2018-01-19 Lokesh Vutlaboard: ti: am574x-idk: Add ddr data support
2018-01-19 Lokesh Vutlaboard: ti: am574x-idk: Add hw data support
2018-01-19 Lokesh Vutlaboard: ti: am574x-idk: Add epprom support
2018-01-19 Lokesh Vutlaarm: dra762: Add support for device package identification
2018-01-19 Lokesh Vutlacmd: ti: Generalize cmd_ddr3 command
2018-01-19 Lokesh Vutlaarm: keystone: Move cmd_ddr3 to a common place
2018-01-19 Lokesh Vutlaarm: emif-common: Add suppport for enabling ECC
2018-01-19 Lokesh Vutlaarm: emif-common: Add ecc specific emif registers
2018-01-19 Tero Kristodrivers: dma: ti-edma3: add support for memory fill
2018-01-19 Felix Brackdt-bindings: leds: adopt Linux PCA9532 binding constants
2018-01-19 Lokesh Vutlaboard: ti: k2g: Make ddr3* declarations as static
2018-01-19 Tomi Valkeinenboard: ti: dra76: mux wakeup2 as gpio1_2
2018-01-19 Lokesh Vutlaarm: am33xx: Avoid writing into reserved DPLL divider
2018-01-19 Lokesh Vutlatools: omapimage: Fix mismatch of image size in header
2018-01-19 Rex Changboard: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support
2018-01-19 Lokesh Vutlaconfigs: k2g_evm: Allocate more space for u-boot
2018-01-19 Vignesh Rboard: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM
2018-01-19 Kishon Vijay... mmc: omap_hsmmc: Fix incorrect bit operations for disab...
2018-01-19 Kishon Vijay... mmc: omap_hsmmc: Enable Auto command (CMD12) enable
2018-01-19 Kishon Vijay... mmc: omap_hsmmc: Add support for DMA (ADMA2)
2018-01-19 Chris Packhamddr: marvell: update ddr controller init and freq
2018-01-19 Chris Packhamddr: marvell: update additional ODT setting
2018-01-19 Chris Packhamddr: marvell: use correct TREFI value
2018-01-19 Chris Packhamddr: marvell: only assert M_ODT[0] on write for a single CS
2018-01-19 Alexey BrodkinARC: devboards: Allow huge uImages (up to 128 MiB)
2018-01-19 Eugeniy PaltsevARC: Invalidate instruction and data caches early on...
2018-01-19 Eugeniy PaltsevARC: HSDK: DTS: Add cgu-clk node
2018-01-19 Eugeniy PaltsevARC: HSDK: CGU: Add 'Hz' when printing clock frequency
2018-01-19 Eugeniy PaltsevARC: HSDK: CGU: Use plat data instead of priv data
2018-01-19 Eugeniy PaltsevARC: HSDK: CGU: Update AXI, TUN, ARC clock options
2018-01-19 Eugeniy PaltsevARC: HSDK: Hang on panic
2018-01-19 Eugeniy PaltsevARC: Cache: Fix style violations reported by checkpatch
2018-01-19 Eugeniy PaltsevARC: Cache: Disable IOC by default
2018-01-19 Eugeniy PaltsevARC: ARCv2: Cache: Fixed operation without IOC
2018-01-19 Jean-Jacques... omap: Update the base address of the MMC controllers
2018-01-19 Jean-Jacques... Revert "omap_hsmmc: update struct hsmmc to accommodate...
2018-01-17 Tom RiniMerge git://git.denx.de/u-boot-fsl-qoriq
2018-01-17 Ashish Kumararmv8: ls1088ardb: Add environment variable address...
2018-01-17 Ashish Kumarenv: sf: Add support for env init for QSPI-NOR
2018-01-17 Ashish Kumararmv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
2018-01-17 Yuantian Tangarm64: ls1012a: Add sata distro boot support
2018-01-17 Yuantian Tangarm64: ls1046a: Add sata distro boot support
2018-01-17 Tom Rinifreescale: Ensure common commands are not included...
2018-01-16 Tom Rinitools: Update python "help" tests to cope with "more...
2018-01-16 Tom RiniMerge git://git.denx.de/u-boot-i2c
2018-01-16 Tom RiniMerge git://git.denx.de/u-boot-dm
2018-01-16 Peng Fani2c: mxc_i2c: Use or operation
2018-01-16 Peng Fanimx: mx7ulp: modify lpi2c seq number
2018-01-16 Peng Fani2c: lpi2c: do not add 4 for bus seq
2018-01-16 Simon Glasstest: Set the DTC environment variable
2018-01-16 Simon Glassdtoc: Allow DTC environment variable to provide path...
2018-01-16 Andre Przywaraarmv8: secure firmware: fix incorrect unit address...
2018-01-16 Andre Przywaratools: fix incorrect usage of DT node unit address
2018-01-16 Andre Przywarasunxi: arm64: correct usage of DT node address in FIT...
2018-01-16 Andre Przywarafix incorrect usage of DT node unit address in comments
next