oweals/u-boot.git
2011-09-04 Jason KridnerBeagleBoard: config: increase command-line functionality
2011-09-04 Jason KridnerBeagleBoard: config: make mtest run
2011-09-04 Koen KooiBeagleBoard: config: enable DSS
2011-09-04 Koen KooiBeagleBoard: config: enable asix driver and dhcp
2011-09-04 Koen KooiBeagleBoard: config: enable networking
2011-09-04 Koen KooiBeagleBoard: config: decrease bootdelay to 2 seconds
2011-09-04 Joel A FernandesBeagleBoard: config: use uImage.beagle for tftp
2011-09-04 Joel A FernandesBeagleBoard: config: hardcode MAC for onboard SMSC
2011-09-04 Koen KooiBeagleBoard: config: load kernel from MMC ext, not FAT
2011-09-04 Jason KridnerBeagleBoard: Configure DVI/S-video
2011-09-04 Jason KridnerBeagleBoard: Added userbutton command
2011-09-04 Koen KooiBeagleBoard: turn off clocks in ehci_stop
2011-09-04 Jason KridnerUSB: Remove __attribute__ ((packed)) for struct ehci_hc...
2011-09-04 Koen Kooibeagleboard: add support for xM revision C
2011-09-04 Koen Kooibeagle: pass expansionboard name in bootargs
2011-09-04 Steve SakomanOMAP: Remove omapfb.debug=y from Beagle and Overo env...
2011-09-04 Bob FeretichOMAP3 Beagle Pin Mux initialization glitch fix
2011-09-04 Nagabhushana... da850: modifications for Logic PD Rev.3 AM18xx EVM
2011-09-04 Nagabhushana... da850: fix the channel number for EMAC teardown init
2011-09-04 Manjunathappa... da850: add support for Spectrum Digital AM18xx EVM
2011-09-04 Nagabhushana... da850: add support to wake up DSP during board init
2011-09-04 Nagabhushana... da850: modify the U-Boot prompt string
2011-09-04 Nagabhushana... da850: add NOR boot mode support
2011-09-04 Sudhakar Rajashekharada8xx: add support for multiple PLL controllers
2011-09-04 Nagabhushana... da850: indicate cache usage disable in config file
2011-09-04 Rajashekhara... dm365: modify boot prompt from dm365 to dm36x
2011-09-04 Nagabhushana... dm365: disable cache usage due to coherency issues
2011-09-04 Nagabhushana... dm6446: disable cache usage due to coherency issues
2011-09-04 Tom RiniOMAP3: Remove legacy mmc driver
2011-09-04 Tom Rinidevkit8000: Use generic MMC driver
2011-09-04 Tom RiniTI OMAP3 SDP3430: Use generic MMC driver
2011-09-04 Tom RiniAM3517 CraneBoard: Use generic MMC driver
2011-09-04 Tom RiniOMAP3: pandora: Use generic MMC driver
2011-09-04 Tom RiniOMAP3: Zoom2: Use generic MMC driver
2011-09-04 Tom RiniOMAP3: Zoom1: Use generic MMC driver
2011-09-04 Tom RiniOMAP3: DIG297: Use generic MMC driver
2011-09-04 Tom RiniOMAP3: CM-T35: Use generic MMC driver
2011-09-04 Vaibhav Hirematham3517evm: Use generic MMC driver
2011-09-04 Vaibhav Hiremathomap3evm: Use generic MMC driver
2011-09-04 Vaibhav Hiremathomap3:clock: check cpu_family before enabling clks...
2011-09-04 Vaibhav Hiremathomap3:clock: configure GFX clock to 200MHz for AM/DM37x
2011-09-04 Vaibhav HiremathOMAP3/4: Increase console I/O buffer size
2011-09-04 Marek VasutPXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
2011-09-04 Marek VasutPXA: Fix CSB226, fix monitor length
2011-09-04 Marek VasutPXA: Fix Lubbock, remove redundant parenthesis
2011-09-04 Aneesh Varmv7: cache: remove flush on un-aligned invalidate
2011-09-04 Aneesh Varmv7: stronger barrier for cache-maintenance operations
2011-09-04 Aneesh Vomap: enable caches at system start-up
2011-09-04 Aneesh Varm: do not force d-cache enable on all boards
2011-09-04 Chander KashyapORIGEN: Add MMC SPL support
2011-09-04 Chander KashyapARMV7: Add support for Samsung ORIGEN board
2011-09-04 Łukasz Majewskii2c:gpio:s5p: Enable I2C GPIO on the GONI target
2011-09-04 Łukasz Majewskii2c:gpio:s5p: I2C GPIO Software implementation (via...
2011-09-04 Simon GlassTegra2: Use clock and pinmux functions to simplify...
2011-09-04 Simon GlassTegra2: Add additional pin multiplexing features
2011-09-04 Simon GlassTegra2: Add more clock support
2011-09-04 Simon GlassTegra2: Add microsecond timer function
2011-09-04 Wolfgang DenkARM: remove broken "at91rm9200dk" board
2011-09-04 Wolfgang DenkARM: remove broken "m501sk" board
2011-09-04 Wolfgang DenkARM: remove broken "kb9202" board
2011-09-04 Wolfgang DenkARM: remove broken "csb637" board
2011-09-04 Wolfgang DenkARM: remove broken "cmc_pu2" board
2011-09-04 Wolfgang DenkARM: remove broken "at91cap9adk" board
2011-09-04 Wolfgang DenkARM: remove broken "voiceblue" board
2011-09-04 Wolfgang DenkARM: remove broken "smdk2400" board
2011-09-04 Wolfgang DenkARM: remove broken "sbc2410x" board
2011-09-04 Wolfgang DenkARM: remove broken "netstar" board
2011-09-04 Wolfgang DenkARM: remove broken "mx1fs2" board
2011-09-04 Wolfgang DenkARM: remove broken "lpd7a40x" boards
2011-09-04 Wolfgang DenkARM: remove broken "edb93xx" boards
2011-09-04 Wolfgang DenkARM: remove broken "B2" board
2011-09-04 Wolfgang DenkARM: remove broken "armadillo" board
2011-09-04 Wolfgang DenkARM: remove broken "assabet" board
2011-09-04 Stefano BabicARM: versatile: drop warnings
2011-09-04 Stefano BabicIMX: scb9328: drop warnings
2011-09-04 Stefano BabicMX31: imx31_litekit: make use of GPIO framework
2011-09-04 Stefano BabicMX31: mx31ads: make use of GPIO framework
2011-09-04 Stefano BabicMX5: mx51evk: make use of GPIO framework
2011-09-04 Stefano BabicMX35: mx35pdk: make use of GPIO framework
2011-09-04 Stefano BabicMX5: mx53loco: make use of GPIO framework
2011-09-04 Stefano BabicMX5: mx53evk: make use of GPIO framework
2011-09-04 Stefano BabicMX5: vision2: make use of GPIO framework
2011-09-04 Stefano BabicMX5: mx53smd: make use of GPIO framework
2011-09-04 Stefano BabicMX5: mx53ard: make use of GPIO framework
2011-09-04 Stefano BabicMX25: zmx25: make use of GPIO framework
2011-09-04 Stefano BabicMX5: efikamx: make use of GPIO framework
2011-09-04 Stefano BabicMX31: QONG: make use of GPIO framework
2011-09-04 Stefano BabicMX35: make use of GPIO framework for MX35 processor
2011-09-04 Stefano BabicMX5: make use of GPIO framework for MX5 processor
2011-09-04 Stefano BabicMX31: make use of GPIO framework for MX31 processor
2011-09-04 Stefano BabicMX25: make use of GPIO framework for MX25 processor
2011-09-04 Stefano BabicIMX: uniform GPIO interface using GPIO framework
2011-09-04 Stefano BabicMX: MX35 / MX5: uniform clock command with powerpc
2011-09-04 Stefano BabicMX35: MX35PDK: support additional RAM on CSD1
2011-09-04 Fabio Estevammx53: ddr3: Update DD3 initialization
2011-09-04 David JanderARM: MX51: PLL errata workaround
2011-09-04 Stefano BabicARM: versatilepb : drop warnings due to double definitions
2011-09-04 Aneesh Vomap4: increase SRAM budget to fix build error
2011-09-04 Aneesh Vomap4: fix build warning due to signed unsigned comparison
2011-09-04 Dirk Behmemkimage: Fix 'Unknown OMAP image type - 5'
next