oweals/u-boot.git
2018-05-14 Marek Behúnphy: marvell: a3700: Access USB3 register indirectly...
2018-05-14 Marek Behúnphy: marvell: a3700: Use reg_set_indirect istead of...
2018-05-14 Marek Behúnphy: marvell: a3700: Use (!ret) instead of (ret == 0)
2018-05-14 Marek Behúnphy: marvell: a3700: Use same timeout for all register...
2018-05-14 Marek Behúnphy: marvell: a3700: Don't create functional macro...
2018-05-14 Marek Behúnphy: marvell: a3700: Use reg_set16 instead of phy_write16
2018-05-14 Marek Behúnphy: marvell: a3700: Change return type of macro MVEBU_REG
2018-05-13 Marek Vasutmmc: Improve tinification
2018-05-11 Tom RiniMerge git://git.denx.de/u-boot-tegra
2018-05-11 Tom RiniSPDX: Correct SPDX tags from recent xilinx merge
2018-05-11 Tom RiniMerge tag 'xilinx-for-v2018.07' of git://denx.de/git...
2018-05-11 Tom RiniMerge git://git.denx.de/u-boot-fsl-qoriq
2018-05-11 Siva Durga... arm64: zynqmp: Enable UHS support for ZCU102 Rev1.0...
2018-05-11 Siva Durga... mmc: zynq_sdhci: Add support for SD3.0
2018-05-11 Siva Durga... mmc: sdhci: Read capabilities register1 and update...
2018-05-11 Siva Durga... mmc: sdhci: Invoke platform specific tuning and delay...
2018-05-11 Siva Durga... sdhci: Add new sdhci ops for platform specific tuning...
2018-05-11 Siva Durga... mmc: sdhci: Handle execute tuning command in sdhci_send...
2018-05-11 Siva Durga... mmc: sdhci: Add support for disabling clock
2018-05-11 Vipul Kumarmmc: Changed the datatype of the variable to handle...
2018-05-11 Michal Simekarm: zynqmp: Add ZynqMP minimal R5 support
2018-05-11 Alexander Graftools: zynqmpimage: Add bif support
2018-05-11 Alexander GrafMAINTAINERS: Declare tools/zynqmp* as Xilinx maintained
2018-05-11 Alexander Graftools: zynqmpimage: Move defines to header
2018-05-11 Alexander Graftools: zynqmpimage: Add partition read support
2018-05-11 Michal Simekarm64: zynqmp: Show model information instead of custom...
2018-05-11 Michal Simekarm64: zynqmp: Simplify boot_target variable composition
2018-05-11 Nitin Jainarm64: zynqmp: Setup MMU map for DDR at run time
2018-05-11 Michal Simekarm64: zynqmp: Enable cadence WDT for zcu100
2018-05-11 Michal Simekarm64: zynqmp: Wire watchdog internals
2018-05-11 Michal Simekwatchdog: cadence: Show used timeout value
2018-05-11 Michal Simekarm64: zynqmp: Reset FPD Watchdog on zcu100
2018-05-11 Siva Durga... nand: zynq: Send address cycles as per onfi parameter...
2018-05-11 Siva Durga... nand: zynq: Add support for 16-bit buswidth
2018-05-11 Michal SimekMAINTAINERS: zynqmp: Point to proper zynqmp folder
2018-05-11 Michal Simekserial: zynq: Remove header depedency on arm header...
2018-05-11 Michal Simektimer: Add Cadence TTC timer counter support
2018-05-11 Siva Durga... microblaze: Dont enable UBI support by default
2018-05-11 Siva Durga... arm64: zynqmp: Add new defconfig for zc1275 revB
2018-05-11 Michal Simekscsi: ceva: Convert driver to use UCLASS_AHCI instead...
2018-05-11 Michal Simekarm: zynq: Remove checkboard and enable DISPLAY_CPUINFO
2018-05-11 Michal Simekarm: zynq: Rework FPGA initialization
2018-05-11 Michal Simekarm: zynq: Enable debug_uart_init in spl when enabled
2018-05-11 Tom RiniMerge git://git.denx.de/u-boot-socfpga
2018-05-11 Tom RiniSPDX: Convert a few files that were missed before
2018-05-11 Heinrich Schuchardttools/file2include: avoid incorrect comments
2018-05-11 Heinrich Schuchardtinclude: update log2 header from the Linux kernel
2018-05-11 Heinrich Schuchardtxyz-modem: va_start() must be matched by va_end()
2018-05-11 Heinrich Schuchardttools/file2include: create Linux style SPDX header
2018-05-11 Hannes Schmelzerbootm: fix 'memory-fixup' for vxWorks boot
2018-05-11 Alex KiernanFix Ymodem build when DEBUG and CONFIG_USE_TINY_PRINTF...
2018-05-11 Fabio Estevamboard/freescale: Remove invalid fsl email addresses
2018-05-11 Fabio Estevamp1022ds: Change Timur's email address
2018-05-11 Lukasz Majewskibootcount: display5: config: Enable boot count feature...
2018-05-11 Lukasz Majewskibootcount: display5: spl: Extend DISPLAY5 board SPL...
2018-05-11 Lukasz Majewskibootcount: spl: Extend SPL to support bootcount increme...
2018-05-11 Lukasz Majewskibootcount: Rewrite autoboot to use wrapper functions...
2018-05-11 Lukasz Majewskibootcount: Add function wrappers to handle bootcount...
2018-05-11 Lukasz Majewskibootcount: Add include guards into bootcount.h file
2018-05-11 Lukasz Majewskibootcount: spl: Enable bootcount support in SPL
2018-05-10 Marcel Ziswilerapalis_t30: fix optional pcie port reset for reliable...
2018-05-10 Marcel Ziswilerapalis_t30: fix pcie port 0 and 1 pin muxing
2018-05-10 Marcel Ziswilerapalis_t30: describe pcie ports
2018-05-10 Marcel Ziswilerapalis-tk1: fix pcie reset for reliable gigabit etherne...
2018-05-10 Marcel Ziswilerpower: as3722: add as3722_ldo_set_voltage signature...
2018-05-10 Marcel Ziswilerpci: tegra: introduce weak tegra_pcie_board_port_reset...
2018-05-10 Marcel Ziswilerpower: as3722: fix ldo_get/set_enable for ldo index...
2018-05-10 Marcel Ziswilerapalis-tk1: add missing as3722 gpio0 configuration
2018-05-10 Sanchayan Maityconfigs: apalis-tk1: fix boot failure using ext4 rootfs
2018-05-10 Marcel Ziswilerconfigs: colibri_t20: enable mtd
2018-05-10 Marcel Ziswilerconfigs: harmony: enable live tree, mtd and ubi
2018-05-10 Marcel Ziswilermtd: nand: tegra: convert to driver model and live...
2018-05-10 Tom RiniMerge git://git.denx.de/u-boot-ubi
2018-05-09 Tom RiniMerge git://git.denx.de/u-boot-sunxi
2018-05-09 Yogesh Gaurdriver: net: fsl-mc: updated copyright info
2018-05-09 Jagdish Gediyamtd: nand: fsl_ifc: Fix nand waitfunc return value
2018-05-09 Hou Zhiqiangarmv8/fsl-lsch2: make the workaround for PIN MUX erratu...
2018-05-09 Hou Zhiqiangarmv8/fsl-lsch2: correct QMAN clock
2018-05-09 Sumit Gargarmv8: sec_firmware: Add support for multiple loadables
2018-05-09 Takuma Uebapowerpc: mpc85xx: Improve Work-around for Erratum A005125
2018-05-09 Ashish Kumararmv8: ls1088: Update 1900MT/s DDR timing to bring...
2018-05-09 Ashish Kumararmv8: ls1088aqds: Enable mdio commands on u-boot prompt
2018-05-09 Ruchika Guptaarmv8: sec_firmware: Remove JR3 from device tree node...
2018-05-09 Ashish Kumararmv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GRE...
2018-05-09 Sriram Dasharmv8: layerscape: Avoid code duplication for TZASC...
2018-05-09 Jagdish Gediyamtd: nand: fsl_ifc: Fix eccstat array overflow for...
2018-05-09 Rajat Srivastavaspi: fsl_qspi: Introduce is_controller_busy function
2018-05-09 Patrice Chotardubifs: avoid assert failed in ubifs.c
2018-05-08 Tom Rinibootm.c: Correct the flush_len used in bootm_load_os()
2018-05-08 Clément Péronimage: fit: Show signatures and hashes for configurations
2018-05-08 Grygorii Strashkoarm: bitops: fix find_next_zero_bit() for case size...
2018-05-08 Neil Armstrongcmd: add ADC cli commands
2018-05-08 Mario Sixpci: Don't use pci_indirect when DM is active
2018-05-08 Mario Sixgdsys: drivers: Add gdsys_rxaui_ctrl driver
2018-05-08 Mario Sixclk: Add ICS8N3QV01 driver
2018-05-08 Mario Sixihs_mdio: Make DM-compatible
2018-05-08 Mario Sixihs_mdio: Encapsulate register access
2018-05-08 Ramon Frieddb410c: set clk node to be probed before relocation
2018-05-08 Patrice ChotardARM: dts: sti: Add stih410-b2260-u-boot.dtsi
2018-05-08 Sam Protsenkoarm: ti: boot: Extract PARTS_DEFAULT to boot.h
next