oweals/u-boot.git
2015-06-04 Bin Mengx86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig
2015-06-04 Bin Mengvideo: Kconfig: Make VESA driver avaiable for non-x86...
2015-06-04 Bin Mengx86: Remove DECLARE_GLOBAL_DATA_PTR in board files
2015-06-04 Bin Mengx86: Update README.x86 for QEMU support
2015-06-04 Bin Mengx86: Change coreboot default build configuration to...
2015-06-04 Bin Mengx86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86...
2015-06-04 Bin Mengx86: Make QEMU the default vendor
2015-06-04 Bin Mengx86: Support QEMU x86 targets
2015-06-04 Bin Mengpci: Move pci_hose_phys_to_bus() to pci_common.c
2015-06-02 Hannes Schmelzerboard/BuR/common: fix netconsole
2015-06-02 Lars Poeschelconfigs: remove CONFIG_NET_MULTI
2015-06-02 Lars PoeschelARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ
2015-06-02 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
2015-06-01 Michal Simeknet: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 Joe Hershbergernet: Move the CMD_NET config to defconfigs
2015-06-01 Joe HershbergerMove setexpr to Kconfig
2015-06-01 Masahiro Yamadablackfin: fix build error on bct-brettl2 board
2015-06-01 Masahiro Yamadasparc: fix build error on gr_ep2s60 board
2015-06-01 Tom RiniMerge branch 'rmobile' of git://git.denx.de/u-boot-sh
2015-05-31 Nobuhiro Iwamatsuarm: rmobile: alt: Update to QoS revision 0.31 and...
2015-05-31 Nobuhiro Iwamatsuarm: rmobile: gose: Update to QoS revision 0.311
2015-05-31 Nobuhiro Iwamatsuarm: rmobile: koelsch: Update to QoS revision 0.411
2015-05-31 Nobuhiro Iwamatsuarm: rmobile: lager: Update to QoS revision 0.973
2015-05-31 Mitsuhiro Kimuraarm: rmobile: alt: Add ethernet function B support
2015-05-31 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-uniphier
2015-05-31 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2015-05-30 Masahiro YamadaARM: UniPhier: add pin mux setting for NAND CS1 of...
2015-05-30 Masahiro YamadaARM: UniPhier: fix pin mux setting for USB port 2 of...
2015-05-30 Masahiro YamadaARM: UniPhier: update DDR PHY register map for PH1...
2015-05-30 Masahiro YamadaARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDR
2015-05-30 Masahiro YamadaARM: UniPhier: set MACH_PH1_PRO4 as default SoC
2015-05-30 Masahiro YamadaARM: UniPhier: move CONFIG_SYS_TEXT_BASE to Kconfig
2015-05-30 Masahiro YamadaARM: UniPhier: remove meaningless CONFIG_SPL_BUILD...
2015-05-30 Masahiro YamadaARM: UniPhier: remove unnecessary cache coherency code
2015-05-30 Masahiro YamadaARM: UniPhier: use 32 bit register access for debug...
2015-05-30 Masahiro YamadaARM: UniPhier: update the vendor name of UniPhier in...
2015-05-30 Masahiro YamadaARM: UniPhier: replace <asm/io.h> with <linux/io.h>
2015-05-29 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun8i
2015-05-29 Chen-Yu TsaiARM: sunxi: Share sun6i PSCI backend with sun8i
2015-05-29 Chen-Yu TsaiARM: sunxi: Enable PSCI for sun6i
2015-05-29 Chen-Yu TsaiARM: sunxi: Add sun6i specific PSCI implementation
2015-05-29 Chen-Yu TsaiARM: sunxi: Make PSCI code sun7i specific
2015-05-29 Chen-Yu TsaiARM: sunxi: Document registers in PSCI code
2015-05-29 Daniel Kochmańskisunxi/nand: Add support to the SPL for loading u-boot...
2015-05-29 Roy Splietsunxi: Match sun4i, sun6i, sun9i CCI definitions for...
2015-05-29 Roy Splietsunxi: Add DMA definitions
2015-05-29 Daniel Kochmańskisunxi/nand: change BLOCK_SIZE in mksunxiboot to match...
2015-05-29 Hans de Goedesun9i: Add Merrii_A80_Optimus board / defconfig file
2015-05-29 Hans de Goedesun9i: Basic sun9i (A80) support
2015-05-29 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-05-29 Hans de Goedesunxi: Update sunxi-common.h to deal with different...
2015-05-29 Hans de Goedesunxi: Remove support for building "old-fashioned"...
2015-05-29 Hans de Goedesunxi: Use axp221 sid on a33
2015-05-29 Tom RiniMerge git://git.denx.de/u-boot-usb
2015-05-29 Hans de Goedeusb: kbd: Fix key repeat not always working
2015-05-29 Peter Griffinusb: dwc2: Add support for v3 snpsid value
2015-05-29 Siva Durga... ci_udc: Update the ci_udc driver to support bulk transfers
2015-05-29 Hans de Goedeusb: Remove unused variable in usb_setup_descriptor()
2015-05-28 Hannes Schmelzercosmetic: change Author/MAINTAINER Name from Petermaier...
2015-05-28 Heiko Schocheram33xx, spl, siemens: enable debug uart output again
2015-05-28 Joe Hershbergernet: Fix a warning added by 76ec988
2015-05-28 Tang Yuantianfsl/sata: Replace sprintf() with snprintf()
2015-05-28 Matt Portergpio: stm32: add stm32f1 support
2015-05-28 Matt PorterARMv7M: add STM32F1 support
2015-05-28 Matt Portercommon/cmd_boot: keep ARM v7M in thumb mode during...
2015-05-28 Matt Porterimage: fix build when CONFIG_NR_DRAM_BANKS is disabled...
2015-05-28 Marek VasutARM: bcm283x: Switch to generic timer
2015-05-28 Marek VasutARM: bcm283x: Reorder timer.h
2015-05-28 Marek VasutARM: bcm283x: Repair wdog.h
2015-05-28 Linus Walleijvexpress64: use uncompressed kernel by default
2015-05-28 Masahiro Yamadakbuild: define DO_DEPS_ONLY for u-boot.cfg to fix build...
2015-05-28 Andrew Bradfordmeminfo cmd: Enable printing >=4GiB SDRAM sizes
2015-05-28 Paul Kocialkowskispl: spl_mmc: Error and count distinction
2015-05-28 Karl Apsiteadd test for two 'loadables'
2015-05-28 Karl ApsiteCombine bootm_find_<thing> functions together
2015-05-28 Karl Apsiteadd boot_get_loadables() to load listed images
2015-05-28 Karl Apsitemkimage will now report information about loadable
2015-05-28 Masahiro Yamadapowerpc: gitignore: ignore PowerPC DTBs
2015-05-28 Thomas Petazzonitools: use pkg-config when available to get SSL flags
2015-05-28 Masahiro Yamadainclude: introduce include/linux/io.h as a wrapper...
2015-05-28 Linus Walleijvexpress64: let Juno wait for root device
2015-05-28 Evgeniy Dushistovbeagle-xm: gpio_63 fix wrong pin initialization
2015-05-28 Ricardo Ribaldappc: xilinx-ppc: Move to generic board support
2015-05-27 Ricardo Ribaldadoc/README.generic-board: Trivial spell check
2015-05-27 Linus Walleijvexpress64: fix various memory issues
2015-05-27 Chris PackhamMakefile: Add U_BOOT_TZ and include in version
2015-05-27 Tim Harveypci: display header for bus scan
2015-05-27 Tim Harveyenv_mmc: add error message to pass to set_default_env
2015-05-27 Ryan Harkinvexpress64: specify CONFIG_SYS_FLASH_CFI_WIDTH
2015-05-27 Lokesh VutlaARM: BeagleBoard-x15: Rev A2x5: Change UART3 mux
2015-05-27 Tuomas Tynkkynenmenu: Return an error code if Ctrl-C is pressed
2015-05-27 Tuomas Tynkkynenpxe: Fix crash if 'sysboot' is run without args
2015-05-27 Tom RiniRevert "Revert "stm32f4: fix serial output""
2015-05-26 Joe Hershbergermoveconfig: Print status about the processed defconfigs
2015-05-26 Joe Hershbergermoveconfig: Add a switch to enable printing errors
2015-05-26 Joe Hershbergermoveconfig: Print a message for missing compiler
2015-05-26 Joe Hershbergermoveconfig: Output a list of failed boards
2015-05-26 Joe Hershbergermoveconfig: Cleanup headers in arch and board
2015-05-26 Joe Hershbergermoveconfig: Add a switch to only cleanup headers
2015-05-26 Joe Hershbergermoveconfig: Add a parameter to accept a list to build
next