oweals/u-boot.git
2014-02-11 Markus NiebelNET: fec_mxc: fix MDIO clock prescaler calculation
2014-02-11 Markus NiebelARM: imx6: fix wrong fec clk
2014-02-11 Marek Vasutpci: mx6: Implement reset callback
2014-02-11 Fabio Estevammx6: Enable L2 cache support
2014-02-11 Fabio Estevammx6qsabreauto: Update imximage.cfg
2014-02-11 Fabio Estevammx6: Distinguish mx6dual from mx6quad
2014-02-11 Fabio Estevamimx: Introduce a header for the imx cpu versions
2014-02-11 Fabio Estevamhummingboard: Return from cpu_eth_init() directly
2014-02-11 Anson Huangimx6: make sure MMDC_CHx_MASK is clear to avoid warm...
2014-02-11 Anson Huangimx6: ensure AHB clock is 132MHz in low freq boot mode
2014-02-11 Fabio Estevammx6sl: Adjust fdt_addr to avoid address overlapping
2014-02-11 Otavio Salvadorvf610twr: Set default environment to use zImage
2014-02-11 Otavio Salvadorudoo: Set default environment to use zImage
2014-02-11 Otavio Salvadormx6slevk: Set default environment to use zImage
2014-02-11 Otavio Salvadormx6sabre_common: Set default environment to use zImage
2014-02-11 Otavio Salvadormx6qarm2: Set default environment to use zImage
2014-02-11 Otavio Salvadormx53loco: Set default environment to use zImage
2014-02-11 Otavio Salvadormx51evk: Set default environment to use zImage
2014-02-11 Otavio Salvadormx28evk: Set default environment to use zImage
2014-02-11 Otavio Salvadormx23evk: Set default environment to use zImage
2014-02-11 Otavio Salvadorhummingboard: Set default environment to use zImage
2014-02-11 Otavio Salvadorcgtqmx6eval: Set default environment to use zImage
2014-01-26 Marek VasutARM: m53evk: Enable CONFIG_REGEX
2014-01-26 Marek VasutARM: m53evk: Rename mxc-nand to mxc_nand
2014-01-26 Fabio Estevamnitrogen6x: README: Do not refer to MAINTAINERS file
2014-01-26 Fabio Estevamnitrogen6x: README: Only calling 'make' is enough
2014-01-26 Marek VasutARM: mx6: Enable PCIe on Sabrelite
2014-01-26 Marek VasutARM: mx6: Add PCI express driver
2014-01-26 Marek VasutARM: mx6: Add PCI express clock configuration
2014-01-26 Marek VasutARM: armv7: Make indirect vector addresses globl
2014-01-26 Stefano BabicMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-17 Fabio Estevammx6: Revert "mx6: soc: Disable VDDPU regulator"
2014-01-15 Nobuhiro Iwamatsuarm: koelsch: Add support QSPI device and enable boot...
2014-01-15 Nobuhiro Iwamatsuarm: lager: Add support QSPI device and enable boot...
2014-01-15 Nobuhiro Iwamatsuspi: sh_qspi: Add header file that defines the address...
2014-01-15 Nobuhiro Iwamatsuarm: rmobile: Add SH QSPI base register address
2014-01-15 Nobuhiro Iwamatsuarm: lager: Disable TMU0 before OS boot
2014-01-15 Nobuhiro Iwamatsuarm: koelsch: Disable TMU0 before OS boot
2014-01-15 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-15 Fabio Estevammx6: Add initial support for the Hummingboard solo
2014-01-15 Fabio Estevammx6: clock: Pass the frequency as argument of enable_fe...
2014-01-14 Andreas Bießmannarm: use canonical sub mnemonic
2014-01-14 Albert ARIBAUDMerge 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-14 Albert ARIBAUDarm: put .hash, .got.plt and .machine_param back in...
2014-01-14 Albert ARIBAUDmx1ads: remove board support
2014-01-14 Albert ARIBAUDmini2440: remove board support
2014-01-13 Marek VasutARM: pxa: Fix OneNAND window access on VPAC270
2014-01-13 Marek VasutARM: pxa: Fix OneNAND SPL builds
2014-01-13 Fabio Estevammx6slevk: Include "mx6_common.h"
2014-01-13 Christian Gmeinerimx6: make use of lldiv(..)
2014-01-13 John Weberwandboard: Set default environment to use zImage
2014-01-13 Otavio Salvadormx6sabresd: Add eMMC specific environment to allow...
2014-01-13 Fabio Estevammx6slevk: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6sabresd: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6qsabreauto: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6qarm2: Remove unneeded error message when cpu_eth_in...
2014-01-13 Fabio Estevamtitanium: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevamwandboard: Return from cpu_eth_init() directly
2014-01-10 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-10 Jagannadha... doc: Update the zynq u-boot status
2014-01-10 Jagannadha... zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
2014-01-10 Jagannadha... dts: zynq: Add more zynq dts files
2014-01-10 Jagannadha... zynq-common: Enable verified boot(RSA)
2014-01-10 Jagannadha... gpio: zynq: Add dummy gpio routines
2014-01-10 Jagannadha... dts: zynq: Add basic fdt support
2014-01-10 Jagannadha... zynq-common: Define CONFIG_ENV_OVERWRITE
2014-01-10 Jagannadha... zynq-common: Define flash env. partition
2014-01-10 Jagannadha... zynq-common: Change Env. Sector size to 128Kb
2014-01-10 Jagannadha... zynq-common: Define default environment
2014-01-10 Jagannadha... zynq: Add support to find bootmode
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm012 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm013 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm010 board support
2014-01-10 Jagannadha... zynq: Add zynq microzed board support
2014-01-10 Jagannadha... zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
2014-01-10 Jagannadha... zynq-common: Define exact TEXT_BASE
2014-01-10 Jagannadha... zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
2014-01-10 Jagannadha... zynq: Add zynq zed board support
2014-01-10 Jagannadha... zynq: Add zynq zc70x board support
2014-01-10 Jagannadha... doc: zynq: Add information on zynq u-boot
2014-01-10 Jagannadha... zynq-common: Rename zynq with zynq-common
2014-01-10 Jagannadha... zynq: Add GEM0, GEM1 configs support
2014-01-10 Jagannadha... zynq: Add UART0, UART1 configs support
2014-01-10 Jagannadha... zynq: Enable cache options
2014-01-10 Jagannadha... zynq: Minor config cleanup
2014-01-10 Jagannadha... zynq: Cleanup on memory configs
2014-01-10 Jagannadha... zynq: Cleanup on miscellaneous configs
2014-01-10 Jagannadha... zynq: Enable Boot FreeBSD/vxWorks
2014-01-10 Jagannadha... zynq: Enable CONFIG_FIT_VERBOSE
2014-01-10 Albert ARIBAUDarm: make 'MAKEALL -a' distinguish between arm and...
2014-01-10 Tom Riniarmv8: Use __aarch64__ rather than CONFIG_ARM64 in...
2014-01-09 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mmc
2014-01-09 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2014-01-09 David Fengarm64: MAKEALL, filter armv8 boards from LIST_arm
2014-01-09 David Fengarm64: board support of vexpress_aemv8a
2014-01-09 David Fengarm64: generic board support
2014-01-09 David Fengarm64: core support
2014-01-09 Scott Woodarm64: Make checkarmreloc accept arm64 relocations
2014-01-09 Scott Woodarm64: Turn u-boot.bin back into an ELF file after...
2014-01-09 Scott Woodarm64: Add tool to statically apply RELA relocations
next