oweals/u-boot.git
2015-05-26 Axel Linpwm: imx: Remove unreachable code
2015-05-26 Axel Linpwm: imx: Prevent NULL pointer dereference
2015-05-21 Tim Harveyimx: ventana: config: enable Falcon mode
2015-05-21 Fabio Estevamwandboard: Switch to SPL support
2015-05-19 Tim Harveythermal: imx_thermal: use CPU temperature grade for...
2015-05-19 Tim Harveyimx: mx6: add display of CPU temperature grade in print...
2015-05-19 Tim Harveyimx: mx6: add get_cpu_temp_grade to obtain cpu temperat...
2015-05-19 Tim Harveyimx: mx6: display max cpu frequency in print_cpuinfo()
2015-05-19 Tim Harveyimx: mx6: add get_cpu_speed_grade_hz func to return...
2015-05-19 Tim Harveymx6: add OTP bank1 registers
2015-05-19 Tim Harveyarm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit...
2015-05-19 Prabhakar Kushwahaarm/imx-common: Fix warning 'get_reset_cause' defined...
2015-05-19 Peng Fanpmic: pfuze100 fix typo
2015-05-19 Peng Fanimx: mx6sx enable SION for i2c pin mux
2015-05-19 Nikolay Dimitrovimx: marsboard: Enable thermal DM support
2015-05-19 Nikolay Dimitrovimx: riotboard: Enable thermal DM support
2015-05-19 Nikolay Dimitrovimx: riotboard, marsboard: Enable thermal support
2015-05-19 Fabio Estevamhummingboard: Remove unused directory
2015-05-19 Tim Harveyimx: ventana: add pmic_setup to SPL
2015-05-19 Tim Harveyimx: ventana: (cosmetic) clean up size defines for...
2015-05-19 Tim Harveyimx: ventana: config: use MMC SPL RAW support
2015-05-19 Tim Harveyenv_nand: use nand_spl_load_image for readenv if SPL
2015-05-15 Tim Harveyimx: ventana: use stack relocation
2015-05-15 Tim Harveyimx: ventana: add GSC boot watchdog disable to SPL
2015-05-15 Tim Harveyimx: ventana: add gpio setup to SPL
2015-05-15 Tim Harveyimx: ventana: use common uart and i2c setup functions...
2015-05-15 Tim Harveyimx: ventana: detect pmic using i2c probe instead of...
2015-05-15 Tim Harveyimx: ventana: move GSC boot watchdog disable function...
2015-05-15 Tim Harveyimx: ventana: split out common functions between SPL...
2015-05-15 Tim Harveyimx: ventana: default msata/pci mux to pci before PCI...
2015-05-15 Tim Harveyimx: ventana: fix pcie reset for GW522x
2015-05-15 Tim Harveyimx: ventana: config: enable Thermal support
2015-05-15 Tim Harveyimx: ventana: enable DM_SERIAL
2015-05-15 Tim Harveyimx: ventana: register gpio's with gpio_request
2015-05-15 Tim Harveyimx: ventana: config: enable driver model
2015-05-15 Tim Harveyimx: ventana: config: enable gpio command
2015-05-15 Tim Harveyimx: ventana: display SPL boot device
2015-05-15 Tim Harveyimx: ventana: set dtype env var to boot media
2015-05-15 Nikolay Dimitrovarm: mx6: ddr3: Remove dead code
2015-05-15 Fabio Estevammx6: Set shared override bit in PL310 AUX_CTRL register
2015-05-15 Soeren Mochtbs2910: add CONFIG_SUPPORT_EMMC_BOOT
2015-05-15 Soeren Mochtbs2910: use default CONFIG_SYS_PBSIZE
2015-05-15 Soeren Mochtbs2910: only enable vga output for stdout/stderr when...
2015-05-15 Soeren Mochtbs2910: support for usb otg host mode
2015-05-15 Fabio Estevamwarp: README: Fix typo
2015-05-15 Fabio Estevammx6cuboxi: Mention Cubox-i in the README
2015-05-15 Fabio Estevamhummingboard: Remove mx6solo specific support
2015-05-15 Tim Harveyimx: ventana: fix boot to SD
2015-05-15 Ulises Cardenasimx: dek_blob: Add explicit include for mapmem
2015-05-15 Brecht Neyrinckbugfix i.mx6 pwm: prevent overflow of period_c * duty_ns
2015-05-15 Fabio Estevammx6cuboxi: Skip usb initialization when booting without...
2015-05-15 Stefan Roesearm: mx6: tqma6: Update to optionally configure an...
2015-05-15 Stefan Roesearm: mx6: tqma6: Fix USB and add other filesystems
2015-05-15 Fabio Estevammx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
2015-05-15 Fabio Estevammx6cuboxi: Fix Ethernet PHY detection problem
2015-05-15 Fabio Estevamlogos: Add Solidrun's logo
2015-05-15 Fabio Estevammx6cuboxi: Allow HDMI and USB keyboard to be stdout...
2015-05-15 Fabio Estevammx6cuboxi: Add USB host support
2015-05-15 Fabio Estevammx6cuboxi: Add HDMI output support
2015-05-15 Ulises CardenasFix mxc_hab documenation
2015-05-15 Nikolay Dimitrovarm: mx6: Clamp MMDC and DDR3 clocks for timing calcula...
2015-05-15 Przemyslaw... sandbox: defconfig: enable support of sandbox PMIC...
2015-05-15 Przemyslaw... sandbox: dts: add sandbox_pmic.dtsi and include it...
2015-05-15 Przemyslaw... test: dm: test.dts - move to sandbox dts directory
2015-05-15 Przemyslaw... test: dm: add sandbox PMIC framework tests
2015-05-15 Przemyslaw... sandbox: add: sandbox PMIC device drivers: I2C emul...
2015-05-15 Przemyslaw... sandbox: i2c: search child emul dev and check its uclass id
2015-05-15 Przemyslaw... doc: driver-model: pmic-framework.txt - cleanup
2015-05-15 Przemyslaw... common: cmd regulator: command cleanup
2015-05-15 Przemyslaw... common: cmd pmic: command cleanup
2015-05-15 Przemyslaw... dm: regulator: uclass driver code cleanup
2015-05-15 Przemyslaw... dm: pmic: code cleanup of PMIC uclass driver
2015-05-15 Przemyslaw... odroid: enable driver model pmic/regulator API and...
2015-05-15 Przemyslaw... odroid: dts: add 'voltage-regulators' description to...
2015-05-15 Przemyslaw... dm: board:samsung: power_init_board: add requirement...
2015-05-15 Przemyslaw... doc: driver-model: pmic and regulator uclass documentation
2015-05-15 Przemyslaw... dm: regulator: add fixed voltage regulator driver
2015-05-15 Przemyslaw... dm: regulator: add max77686 regulator driver
2015-05-15 Przemyslaw... dm: pmic: add max77686 pmic driver
2015-05-15 Przemyslaw... pmic: max77686 set the same compatible as in the kernel
2015-05-15 Przemyslaw... dm: regulator: add regulator command
2015-05-15 Przemyslaw... dm: pmic: add pmic command
2015-05-15 Przemyslaw... dm: regulator: add implementation of driver model regul...
2015-05-15 Przemyslaw... dm: pmic: add implementation of driver model pmic uclass
2015-05-15 Przemyslaw... lib: Kconfig: add entry for errno_str() function
2015-05-15 Przemyslaw... exynos4-common: remove the unsued CONFIG_CMD_PMIC
2015-05-15 Przemyslaw... exynos5: fix build break by adding CONFIG_POWER
2015-05-15 Peng Fani2c: mxc: refactor i2c driver and support dm
2015-05-15 Peng Fanimx: mx27 move GPIO_PORTx to gpio.h
2015-05-15 Hans de Goedesunxi: Change usb-kbd interrupt polling to use an usb...
2015-05-15 Hans de Goedeusb: ohci: Add support for interrupt queues
2015-05-15 Hans de Goedeusb: ohci: Add an ohci_alloc_urb() function
2015-05-15 Hans de Goedeusb: ohci: Do not reuse ed for interrupt endpoints...
2015-05-15 Simon Glasssandbox: Support wide-screen LCD emulation
2015-05-15 Simon Glasssandbox: Fix warning in display_options
2015-05-15 Simon Glasssandbox: spi: Add newline to printf() in sandbox_sf_probe
2015-05-15 Simon Glasssandbox: cros_ec: Support EC_CMD_ENTERING_MODE emulation
2015-05-15 Simon Glasssandbox: Add missing errno.h includes in a few files
2015-05-15 Simon Glasssandbox: Correct error handling in state_read_file()
2015-05-15 Simon Glassarm: Add a prototype for save_boot_params_ret()
next