oweals/u-boot.git
2016-06-13 Steve Raeboard: arm:: Add support for Broadcom BCM23550
2016-06-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arc
2016-06-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-ubi
2016-06-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-atmel
2016-06-13 Alexey Brodkinaxs103: Bump CPU frequency from 50MHz to 100MHz
2016-06-13 Alexey Brodkinarc: Update data accessors with use of memory barriers
2016-06-13 Alexey Brodkinboard: axs10x: Flush entire cache after programming...
2016-06-13 Alexey Brodkinarc/cache: Flush & invalidate all caches right before...
2016-06-13 Alexey Brodkinarc/cache: really do invalidate_dcache_all() even if...
2016-06-13 Marcin Niestrojcommon: env_ubi: Clear environment buffer before reading
2016-06-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-uniphier
2016-06-12 Masahiro Yamadaautoboot: follow-up cleanup after CONFIG_BOOTDELAY...
2016-06-12 Masahiro YamadaARM: stm32: remove unused CONFIG_AUTOBOOT
2016-06-12 Masahiro Yamadatools: fix define2mk.sed to not add quotes around negat...
2016-06-12 Joe Hershbergertools: moveconfig: Add a new --git-ref option
2016-06-12 Joe Hershbergertools: moveconfig: New color used for changed defconfig
2016-06-12 Joe Hershbergertools: moveconfig: Fix another typo
2016-06-12 Masahiro Yamadatools: moveconfig: make Slot.poll() more readable with...
2016-06-12 Masahiro Yamadatools: moveconfig: allow to run without any CONFIG...
2016-06-12 Masahiro Yamadatools: moveconfig: add --force-sync option
2016-06-12 Masahiro Yamadatools: moveconfig: report when defconfig is updated
2016-06-12 Masahiro Yamadatools: moveconfig: report when CONFIGs are removed...
2016-06-12 Masahiro Yamadatools: moveconfig: display log when savedefconfig occurs
2016-06-12 Masahiro Yamadatools: moveconfig: skip savedefconfig if .config was...
2016-06-12 Masahiro Yamadatools: moveconfig: refactor code to go back to idle...
2016-06-12 Masahiro Yamadatools: moveconfig: display log atomically in more reada...
2016-06-12 Masahiro Yamadatools: moveconfig: move log output code out of Kconfig...
2016-06-12 Masahiro Yamadatools: moveconfig: compute file paths just once
2016-06-12 Masahiro Yamadatools: moveconfig: allow to give CONFIG names as argume...
2016-06-12 Masahiro Yamadatools: moveconfig: drop code for handling type and...
2016-06-12 Masahiro Yamadatools: moveconfig: do not rely on type and default...
2016-06-12 Masahiro Yamadatools: moveconfig: increment number of processed files...
2016-06-12 Masahiro Yamadatools: moveconfig: exit with error message for not...
2016-06-12 Masahiro Yamadatools: moveconfig: check compilers before starting...
2016-06-12 Masahiro Yamadatools: moveconfig: check directory location before...
2016-06-12 Masahiro Yamadatools: moveconfig: remove redundant else: after sys...
2016-06-12 Masahiro Yamadatools: moveconfig: rename update_defconfig() to update_...
2016-06-12 Masahiro Yamadatools: moveconfig: fix --dry-run option
2016-06-12 Wenyou Yangserial: atmel_usart: Add device tree support
2016-06-12 Marek VasutARM: at91: Fix PMC bit definitions
2016-06-12 Marek VasutARM: at91: sama5: Extend boot device autodetection
2016-06-12 Andre Renaudarm: at91: Add support for gurnard
2016-06-12 Simon Glassfdt: Correct return value in fdtdec_decode_display_timing()
2016-06-12 Simon Glassat91: video: Support driver-model for the LCD driver
2016-06-12 Simon Glassat91: video: Prepare for driver-model conversion
2016-06-12 Andreas Bießmannlinux/compat.h: add dev_warn()
2016-06-12 Simon Glassat91: Add driver-model GPIO devices for AT91SAM9G45
2016-06-12 Andre Renaudat91: nand: Set up the ECC strength correctly
2016-06-12 Andre Renaudat91: Correct NAND ECC register access
2016-06-12 Andre Renaudarm: at91: Add a header file for the real-time clock
2016-06-12 Simon Glassarm: at91: dts: Bring in device tree file for AT91SAM9G45
2016-06-12 Simon Glassnet: macb: Convert to driver model
2016-06-12 Simon Glassnet: macb: Flush correct cache portion when sending
2016-06-12 Simon Glassnet: macb: Prepare for driver-model conversion
2016-06-12 Andre Renaudnet: Handle an empty bootp extension section
2016-06-12 Simon Glassbootm: Align cache flush end address correctly
2016-06-12 Simon Glassarm: Allow skipping of low-level init with I-cache on
2016-06-12 Andre Renaudat91: Add support for the AT91 slow clock controller
2016-06-12 Marek Vasutgpio: at91: Fix pullup/pulldown configuration on PIO3
2016-06-12 Teddy Reedverified-boot: Minimal support for booting U-Boot prope...
2016-06-12 Andrew F. Davisti_armv7_common: env: Remove no longer needed mem_reserve
2016-06-12 Michael Trimarchicmd: gpt: add - partition size parsing
2016-06-12 Keerthyarm: dra7xx: Assign omap_vcores based on board type
2016-06-12 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2016-06-12 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mips
2016-06-12 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2016-06-12 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-x86
2016-06-12 Bin Mengx86: broadwell: gpio: Remove the codes to set up pin...
2016-06-12 Bin Mengx86: Probe pinctrl driver in cpu_init_r()
2016-06-12 Bin Mengx86: Enable regmap and syscon for coreboot and qemu-x86
2016-06-12 Bin Mengx86: Update x86-pinctrl driver device-tree-bindings doc
2016-06-12 Bin Mengx86: baytrail: Configure card detect pin of the SD...
2016-06-12 Bin Mengx86: baytrail: Change fsp, emmc-boot-mode to "auto"
2016-06-12 Bin Mengx86: baytrail: Add 'reg' property in the pinctrl node
2016-06-12 Bin Mengx86: ich6_gpio: Output return value of syscon_get_by_dr...
2016-06-12 George McCollisterx86: acpi: Fix madt lapic generation
2016-06-10 Yuan Yaoarmv8: ls2080aqds: Enable QSPI boot support
2016-06-10 Yuan Yaoconfigs: ls2080aqds_nand_defconfig: Enable QSPI
2016-06-10 Yuan Yaoconfigs: ls2080a: Increase load image len in NAND boot
2016-06-10 Yuan Yaoarmv8: ls2080aqds: Config QSPI pin mux via FPGA in...
2016-06-10 Yuan Yaodts: ls2080aqds: Add QSPI dts node
2016-06-10 Yuan Yaoconfigs: ls2080aqds: Enable QSPI flash support
2016-06-10 Yuan Yaoarmv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI...
2016-06-10 Yuan Yaoconfigs: ls2080a_common: Remove duplicate NOR configs
2016-06-10 Yuan Yaoarmv8: ls2080aqds: Select QSPI CLK div via SCFG
2016-06-10 Yuan Yaodrivers: i2c: mxc: Add early init
2016-06-10 Pratiyush Mohan... board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment
2016-06-10 Yunhui Cuiarmv8/ls2080a: configure PMU's PCTBENR to enable WDT
2016-06-10 Siarhei Siamashkasunxi: Move the SPL stack top to 0x1A000 on Allwinner...
2016-06-10 Siarhei Siamashkasunxi: Downclock AHB1 to 100MHz on Allwinner A64
2016-06-10 Purna Chandra... spi: pic32_spi: add SPI master driver for PIC32 SoC.
2016-06-10 Paul BurtonMIPS: Make CONFIG_SYS_DCACHE_LINE_SIZE int, not hex
2016-06-10 Paul BurtonMIPS: Fix invalidate_dcache_range to operate on L1...
2016-06-10 Hans de Goedesunxi: musb: Properly turn of musb controller before...
2016-06-10 Hans de Goedesunxi: Add INITIAL_USB_SCAN_DELAY to Mele_A1000G_quad_d...
2016-06-10 Hans de Goedesunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfig
2016-06-09 Heiko Schochersiemens,am33x: add draco etamin board
2016-06-09 Heiko Schocherdfu, nand, ubi: fix erasing after write finish
2016-06-09 Heiko Schocheram335x, dxr2: get ECC sType from I2C eeprom
2016-06-09 Heiko Schochermtd: nand: omap: allow to switch to BCH16
next