oweals/u-boot.git
2016-04-01 Mateusz Kulikowskiehci-hcd: Add init_after_reset
2016-04-01 Mateusz Kulikowskimmc: Add support for Qualcomm SDHCI controller
2016-04-01 Mateusz Kulikowskigpio: Add support for Qualcomm gpio controller
2016-04-01 Mateusz Kulikowskiserial: Add support for Qualcomm serial port
2016-04-01 Dan Murphyboard: ti: DRA7: Add DP83867 TI phy for rev c
2016-04-01 Alexander Grafefi_loader: Always allocate the highest available address
2016-04-01 Paul Kocialkowskisniper: Change vendor name from lge to lg, matching...
2016-04-01 Paul Kocialkowskikc1: Proper reboot mode and boot reason validation
2016-04-01 Paul Kocialkowskisniper: Proper reboot mode and boot reason validation
2016-04-01 Paul Kocialkowskikc1: Add some sysboot and devicetree-related environmen...
2016-04-01 Paul Kocialkowskikc1: Select libfdt to allow running devicetree-based...
2016-04-01 Paul Kocialkowskikc1: Include explicit serial baudrate on bootargs
2016-04-01 Paul Kocialkowskisniper: Include explicit serial baudrate on bootargs
2016-04-01 Masahiro Yamadaarm64: booti: add missing unmap_sysmem()
2016-04-01 Vitaly Andrianovconfigs: ti_armv7_keystone2: make SYS_TEXT_BASE configu...
2016-04-01 Andreas Dannenbergarm: spl: Align default board_init_f comment with code
2016-04-01 Robert P. J... post: Remove references to scrapped "netta" board.
2016-04-01 Peng Fancommon: env_sf: Add exclamation mark
2016-04-01 Tom Rinijffs2: Fix set but not used warning
2016-04-01 Tom Rinilib/physmem.c: Switch to __weak for arch_phys_memset
2016-04-01 Robert P. J... post: Delete unnecessary bitmask of POST_MANUAL from...
2016-04-01 Robert P. J... post: Remove reference to deleted "lwmon" board from...
2016-04-01 Ahmed Samir... Common: SPL: spl_nand: Fixed debug correct NAND ECC...
2016-04-01 Stephen Warrenrpi: BCM2837 and Raspberry Pi 3 32-bit support
2016-04-01 Stephen WarrenARM: bcm2835: expand Kconfig target descriptions
2016-04-01 Stephen Warrenrpi: add Raspberry Pi 3 board ID
2016-04-01 Stephen Warrenrpi: use constant "unknown board" DT filename
2016-04-01 Stephen WarrenARM: bcm2835: move CONFIG_BCM283* to Kconfig
2016-04-01 Andreas Dannenbergdoc: clarify openssl-based key and certificate generati...
2016-04-01 Andreas Dannenbergdoc: fix file extension for flattened image tree blob
2016-04-01 Fabio EstevamREADME: Specify the full path for README.displaying...
2016-04-01 Nishanth MenonARM: keystone2: Add missing privilege ID settings
2016-04-01 Nishanth MenonARM: keystone2: Refactor MSMC macros to avoid #ifdeffery
2016-04-01 Stephen Warrensmsc95xx: fix operation on 64-bit systems
2016-04-01 Simon GlassDrop command-processing code when CONFIG_CMDLINE is...
2016-04-01 Rob Herringfastboot: allow retrieving fastboot variables from env
2016-04-01 Tom Riniarm: clang: Update support slightly
2016-04-01 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2016-04-01 Alexander Grafsunxi: Reserve ATF memory space on A64
2016-04-01 Siarhei Siamashkasunxi: Add Pine64+ support
2016-04-01 Siarhei Siamashkasunxi: Add support for Allwinner A64 SoCs
2016-04-01 Alexander Grafsunxi: Explicitly cast u32 pointer conversions
2016-04-01 Alexander Grafsunxi: Depend SPL configs on SUPPORT_SPL
2016-04-01 Alexander Grafsunxi: Move cpu independent code to mach directory
2016-04-01 Chen-Yu Tsaisunxi: Enable USB nodes for H8Homlet v2
2016-04-01 Chen-Yu Tsaisunxi: Enable USB on Cubietruck Plus
2016-04-01 Chen-Yu Tsaisunxi: Add USB and R_PIO nodes to sun8i-a83t.dtsi
2016-04-01 Chen-Yu Tsaisunxi: Cubietruck Plus: Enable USB Kconfig options...
2016-04-01 Chen-Yu Tsaisunxi: h8_homlet_v2: Enable USB Kconfig options in...
2016-03-31 Masahiro YamadaARM: uniphier: remove CONFIG_ARP_TIMEOUT define
2016-03-31 Masahiro Yamadacosmetic: Fix typos "privide"
2016-03-31 Masahiro YamadaARM: uniphier: rename function names ph1_* to uniphier_*
2016-03-31 Masahiro YamadaARM: uniphier: add pin-mux settings for NAND, eMMC...
2016-03-31 Masahiro YamadaARM: uniphier: enable eMMC on PH1-sLD3 reference board
2016-03-31 Masahiro YamadaARM: uniphier: adjust dram_init() and dram_init_banksiz...
2016-03-31 Masahiro YamadaARM: uniphier: drop unneeded defines related to legacy...
2016-03-31 Masahiro YamadaARM: dts: uniphier: add NAND pinmux node
2016-03-31 Masahiro YamadaARM: dts: uniphier: add clock-frequency to serial nodes...
2016-03-31 Masahiro Yamadapinctrl: uniphier: support UniPhier PH1-LD11 pinctrl...
2016-03-31 Masahiro Yamadapinctrl: uniphier: support UniPhier PH1-LD20 pinctrl...
2016-03-31 Masahiro Yamadapinctrl: uniphier: support per-pin input enable for...
2016-03-31 Masahiro Yamadapinctrl: uniphier: introduce capability flag
2016-03-31 Masahiro Yamadapinctrl: uniphier: use devm_get_addr() to get base...
2016-03-31 Masahiro Yamadammc: uniphier: use devm_get_addr() to get base address
2016-03-31 Masahiro Yamadagpio: uniphier: use devm_get_addr() to get base address
2016-03-31 Masahiro Yamadai2c: uniphier: use devm_get_addr() to get base address
2016-03-31 Masahiro Yamadaclk: uniphier: use devm_get_addr() to get base address
2016-03-31 Masahiro Yamadaserial: uniphier: use devm_get_addr() to get base address
2016-03-31 Masahiro YamadaARM: uniphier: add sramupdate command
2016-03-31 Masahiro YamadaARM: uniphier: make u-boot-with-spl.bin really available
2016-03-31 Graham Mooremtd: nand: denali: max_banks calculation changed in...
2016-03-31 Chen-Yu Tsaisunxi: ohci: Add A83T compatible
2016-03-31 Chen-Yu Tsaisunxi: ehci: Add A83T compatible
2016-03-31 Chen-Yu Tsaisunxi: clk: Fix USB PHY clock macros for A83T
2016-03-31 Chen-Yu Tsaisunxi: usb_phy: Add support for A83T USB PHYs
2016-03-31 Chen-Yu Tsaisunxi: h8_homlet_v2: Set DLDO4 to 3.3V
2016-03-31 Chen-Yu Tsaisunxi: h8_homlet_v2: Set DCDC1 to default voltage ...
2016-03-31 Chen-Yu Tsaipower: axp818: Add support for FLDOs
2016-03-31 Chen-Yu Tsaipower: axp818: Fix DCDC5 default voltage
2016-03-31 Chen-Yu Tsaisunxi: axp: Support VBUS drive GPIO on AXP818
2016-03-31 Chen-Yu Tsaisunxi: axp: Generalize register macros for VBUS drive...
2016-03-31 Chen-Yu Tsaimusb: sunxi: Add support for A83T
2016-03-31 Chen-Yu Tsaipower: axp818: Remove undefined axp818_init()
2016-03-31 Hans de Goedesunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime...
2016-03-31 Michael Haassunxi: A20-OLinuXino-Lime2: Force 8211CL to master
2016-03-31 Michael Haassunxi: A20-Olimex-SOM-EVB: Force 8211CL to master
2016-03-31 Michael Haasnet: phy: Optionally force master mode for RTL PHY
2016-03-31 Hans de Goedesunxi: Print soc-id from sram controller for sun8i...
2016-03-31 Hans de Goedesunxi: Add conditional magic sram poke for A33
2016-03-29 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2016-03-29 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-fsl...
2016-03-29 Stephen WarrenARM: tegra210: set PLLE_PTS bit when enabling PLLE
2016-03-29 Rai Harninderarmv8/ls2080ardb: Enable VID support
2016-03-29 Qianyu Gongarmv8/ls1043aqds: dts: Set SPI mode for DSPI
2016-03-29 Mingkai Huarmv8: fsl-layerscape: Add LS1023A SVR
2016-03-29 Mingkai Huarmv8: fsl-layerscape: Fix LS1043A SVR register
2016-03-29 Saksham JainSECURE BOOT: Change fsl_secboot_validate func to pass...
2016-03-29 Saksham JainSECURE BOOT: Halt execution when secure boot fail
2016-03-29 Saksham JainSECURE_BOOT: Use default bootargs
2016-03-29 Saksham Jaincrypto/fsl: Make CAAM transactions cacheable
next