oweals/u-boot.git
2008-03-28 Mark Jonassh: Added support for SH7720 based board MPR2.
2008-03-28 Nobuhiro Iwamatsush: Fix receive FIFO level register of SH4A
2008-03-28 Yusuke Godash: Add support Renesas Solutions R7780MP
2008-03-28 Yusuke Godash: Add support PCI of SuperH and SH7780
2008-03-28 Yusuke Godash: Add support SH7780
2008-03-28 goda.yusukesh: Add support Renesas Solutions Migo-R board
2008-03-27 Bartlomiej... Fix host tool build breakage, take two
2008-03-27 Haavard Skinnemoennew-image: Fix host tool build breakage
2008-03-26 Wolfgang DenkMerge branch 'master' of git+ssh://10.10.0.7/home/wd...
2008-03-26 Anatolij GustschinFix out of tree building issue
2008-03-26 Wolfgang DenkMerge branch 'master' of git://denx.de/git/u-boot-mpc85xx
2008-03-26 Wolfgang DenkMerge branch 'master' of git://denx.de/git/u-boot-usb
2008-03-26 Anatolij GustschinREADME: update documentation (availability, links,...
2008-03-26 Anatolij GustschinFix compilation error in cmd_usb.c
2008-03-26 Timur TabiAdd support for setting the I2C bus speed in fsl_i2c.c
2008-03-26 Wolfgang DenkCoding style cleanup, update CHANGELOG
2008-03-26 Dave Liudrivers: add the support for Freescale SATA controller
2008-03-26 Dave Liuata: add the readme for SATA command line
2008-03-26 Dave Liuata: enable the sata initialize on boot up
2008-03-26 Dave Liuata: add the fis struct for SATA
2008-03-26 Dave Liuata: add the libata support
2008-03-26 Dave Liuata: make the ata_piix driver using new SATA framework
2008-03-26 Dave Liuata: add the support for SATA framework
2008-03-26 Dave Liuata: merge the header of ata_piix driver
2008-03-26 Dave Liuata: merge the ata_piix driver
2008-03-26 Markus KlotzbuecherUSB, Storage: fix a bug introduced in commit
2008-03-26 Anatolij GustschinFix compilation error in cmd_usb.c
2008-03-26 Kumar Gala85xx: Add cpu_mp_lmb_reserve helper to reserve boot...
2008-03-26 Kumar Gala85xx: Update multicore boot mechanism to ePAPR v0.81...
2008-03-26 Jon LoeligerFSL: Clean up board/freescale/common/Makefile
2008-03-26 Kumar Gala85xx: Fix merge duplication
2008-03-26 James Yang85xx: Expand CCSR space with more DDR controller registers.
2008-03-26 James Yang85xx: Speed up get_ddr_freq() and get_bus_freq()
2008-03-26 James Yang85xx: Show DDR memory data rate in addition to the...
2008-03-26 James Yang85xx: get_tbclk() speed up and rounding fix
2008-03-26 Andy FlemingUpdate SVR numbers to expand support
2008-03-26 Andy FlemingAdd the Freescale PCI device IDs
2008-03-26 Kumar Gala85xx: Added support for multicore boot mechanism
2008-03-26 Kumar Gala85xx: Added support for multicore boot mechanism
2008-03-26 Kumar Gala85xx: Add the concept of CFG_CCSRBAR_PHYS
2008-03-26 Wolfgang DenkCoding style cleanup.
2008-03-26 Joakim TjernlundAdd CFG_RTC_DS1337_NOOSC to turn off OSC output
2008-03-26 Wolfgang DenkCleanup coding style, update CHANGELOG
2008-03-26 Wolfgang DenkMerge branch 'master_merge_new-image' of /home/tur...
2008-03-26 Wolfgang DenkREADME: update documentation (availability, links,...
2008-03-26 Bartlomiej... Merge branch 'new-image' of git://denx.de/git/u-boot...
2008-03-26 Aras VaichasUSB Storage, add meaningful return value
2008-03-26 Anton Vorontsov83xx/fdt_support: let user specifiy FSL USB Dual-Role...
2008-03-26 Anton Vorontsovtsec: fix link detection for the RTL8211B PHY
2008-03-26 Anton Vorontsovmpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
2008-03-26 Joe D'AbbraccioModified the DDR SDRAM clock control register to delay...
2008-03-26 Scott Woodmpc83xx: Set PCI I/O bus-address base to zero.
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: add dhcp command
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: configure pario pins for AD7843...
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: add support for NAND
2008-03-26 Anton Vorontsovmpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
2008-03-26 Anton Vorontsovuec: add support for Broadcom BCM5481 Gigabit PHY
2008-03-26 Anton Vorontsovuec: add support for RGMII_RXID interface mode
2008-03-26 Anton Vorontsovuec: add support for gbit mii status readings
2008-03-26 Anton Vorontsov83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837X...
2008-03-26 Anton Vorontsov83xx: initialize serdes for MPC837XRDB boards
2008-03-26 Anton Vorontsov83xx: serdes setup routines
2008-03-26 Anton Vorontsov83xx: split COBJS onto separate lines
2008-03-26 Anton Vorontsov83xx: nand support for MPC837XRDB boards
2008-03-26 Jerry Van BarenEnable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
2008-03-26 Michael Barkowskimpc8323erdb: remove RTC and add EEPROM
2008-03-26 Michael Barkowskimpc8323erdb: Improve the system performance
2008-03-26 Michael Barkowskimpc8323erdb: use readable DDR config macros
2008-03-26 Timur Tabi83xx: Add Vitesse VSC7385 firmware uploading
2008-03-26 Timur TabiNET: Add Vitesse VSC7385 firmware uploading
2008-03-25 Wolfgang DenkCoding Style cleanyp; update CHANGELOG
2008-03-25 Wolfgang DenkMerge branch 'master' of git://denx.de/git/u-boot-mips
2008-03-25 Wolfgang DenkMerge branch 'master' of git://denx.de/git/u-boot-mpc86xx
2008-03-25 Jerry Van BarenRemove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF...
2008-03-25 Stefan Roesertc: Remove 2nd reference to max6900.o in drivers/rtc...
2008-03-25 Kyungmin ParkAdd Flex-OneNAND booting support
2008-03-25 André SchwarzMPC5200: support setup without FEC
2008-03-25 Jon LoeligerFSL: Move board/mpc8266ads under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc7448hpc2 under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8260ads under board/freescale
2008-03-25 goda.yusukenet: Add support AX88796L ethernet device
2008-03-25 Wolfgang Denkne2000 driver: change #ifdef to Makefile conditional...
2008-03-25 goda.yusukenet: Divided code of NE2000 ethernet driver
2008-03-25 Mike Frysingernet/Blackfin: move on-chip MAC driver into drivers...
2008-03-25 Mike Frysingersmc91111: use SSYNC() rather than asm(ssync) for Blackfin
2008-03-25 Bryan O'Donoghue8xx: Update OF support on 8xx
2008-03-25 Kumar Galappc: Allow boards to specify how much memory they can map
2008-03-25 Bryan O'Donoghue8xx : Add OF support to Adder875 board port - resubmit
2008-03-25 Kumar GalaAdd setexpr command
2008-03-25 Jon LoeligerFSL: Move board/mpc7448hpc2 under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8266ads under board/freescale
2008-03-25 Jon LoeligerFSL: Move board/mpc8260ads under board/freescale
2008-03-25 Shinya Kuribayashi[MIPS] Move gth2_config from ARM section to MIPS
2008-03-25 Shinya Kuribayashi[MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
2008-03-25 Shinya Kuribayashi[MIPS] Fix dcache_status()
2008-03-25 Shinya Kuribayashi[MIPS] Introduce _machine_restart
2008-03-25 Shinya Kuribayashi[MIPS] Cleanup CP0 Status initialization
next