oweals/u-boot.git
2016-02-23 Mugunthan V Ndrivers: dma: ti-edma3: convert driver to adopt driver...
2016-02-23 Mugunthan V Nspi: ti_qspi: compile out spi_flash_copy_mmap when...
2016-02-23 Mugunthan V Nsf: spi_flash: use dma to copy data from mmap region...
2016-02-23 Mugunthan V Ndma: Kconfig: Add TI_EDMA3 entry
2016-02-23 Mugunthan V Ndm: implement a DMA uclass
2016-02-23 Michal SimekARM: zynq: Wire-up saving environment to QSPI
2016-02-21 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2016-02-21 Peng Fanimx: mx7d: isolate resources to domain 0 for A7 core
2016-02-21 Peng Fanimx: mx7dsabresd: add command and macros for boot m4...
2016-02-21 Peng Fanimx: mx7: implement functions to boot auxiliary core
2016-02-21 Peng Fanimx: mx6sxsabresd: add command and macros for boot...
2016-02-21 Peng Fanimx: mx6: implement functions to boot auxiliary core
2016-02-21 Peng Fanimx: imx-common: introduce boot auxiliary core
2016-02-21 Peng Fanimx: mx7d: clock support for RDC
2016-02-21 Peng Fanimx: mx7d: Add RDC support
2016-02-21 Peng Fanimx: mx6sx Add RDC mappings of masters and peripherals
2016-02-21 Peng Fanimx: imx-common: introduce Resource Domain Controller...
2016-02-21 Peng Fanimx: mx6: introduce rdc regs
2016-02-21 Julien CORJONimx: mx6quq7: add sd card detection
2016-02-21 Julien CORJONimx: mx6quq7: specify max_bus_witdh directly in usdhc_cfg
2016-02-21 Julien CORJONimx: mx6quq7: fix USDHC4 declaration
2016-02-21 Soeren Mochboard: tbs2910: Autoselect environment device when...
2016-02-21 Soeren Mochimx: mx6: Implement mmc_get_env_part
2016-02-21 Peng Fanpinctrl: imx: Support i.MX7D
2016-02-21 Peng Fanpinctrl: imx: Introduce pinctrl driver for i.MX6
2016-02-21 Ulises Cardenasimx: Refactoring CAAM Job Ring structure and Secure...
2016-02-21 Fabio Estevammx7dsabresd: Make 'ums' command functional
2016-02-21 Fabio Estevammx7dsabresd: Use Adrian's NXP email address
2016-02-21 Fabio Estevammx6ul_14x14_evk: Select CONFIG_FSL_QSPI
2016-02-21 Andreas Bießmannmxsboot: remove unused include
2016-02-21 Bin Mengx86: doc: Update to include Intel Bayley Bay board...
2016-02-21 Bin Mengx86: Add Intel Cougar Canyon 2 board
2016-02-21 Bin Mengx86: ivybridge: bd82x6x: Support FSP enabled configuration
2016-02-21 Bin Mengx86: fsp: Make sure HOB list is not overwritten by...
2016-02-21 Bin Mengsuperio: Add SMSC SIO1007 driver
2016-02-21 Bin Mengx86: ivybridge: Add FSP support
2016-02-21 Stephen Warrenx86: fix memalign() parameter order
2016-02-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-atmel
2016-02-20 Andreas Bießmannvinco: add Maintainers file
2016-02-20 Alexey Brodkinarc: cache - utilize IO coherency (AKA IOC) engine
2016-02-20 Alexey Brodkinarc: cache - accommodate different L1 cache line lengths
2016-02-19 Guillaume GARDETspl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS
2016-02-19 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2016-02-19 Gregory CLEMENTARM: Add Support for the VInCo platform
2016-02-18 Samuel MescoffARM: at91: sama5d2: configure the L2 cache memory
2016-02-18 Marek Vasutarm: at91: Add support for DENX MA5D4 SoM and EVK
2016-02-18 Matthias Michelsiemens,at91: enable features for smartweb
2016-02-18 Wenyou Yangboard: atmel: clean up the PMC_PLLICPR init code
2016-02-18 Wenyou YangARM: at91: clean up the PMC_PLLICPR init code
2016-02-18 Wenyou YangARM: at91: clock: add PMC_PLLICPR init function
2016-02-18 Wenyou Yangboard: atmel: siemens: clean up PLLB code
2016-02-18 Wenyou Yangdrivers: usb: ohci-at91: clean up the PLLB code
2016-02-18 Wenyou YangARM: at91: clock: add PLLB enable/disable functions
2016-02-18 Wenyou Yangboard: atmel: siemens: clean up UTMI PLL code
2016-02-18 Wenyou Yangdrivers: usb: atmel: clean up the UTMI PLL code
2016-02-18 Wenyou YangARM: at91: armv7: clean up UTMI PLL handle code
2016-02-18 Wenyou YangARM: at91: clock: add UTMI PLL enable/disable function
2016-02-18 Wenyou Yangdrivers: at91: clean up peripheral clock code
2016-02-18 Wenyou Yangboard: atmel: clean up peripheral clock code
2016-02-18 Wenyou YangARM: cpu: at91: clean up peripheral clock code
2016-02-18 Wenyou YangARM: at91: clock: add a new file to handle clock
2016-02-18 Wenyou YangARM: at91: asm/at91_pmc.h: fix trival register offset
2016-02-18 Stefan Roesenet: phy: marvell: Fix problem with phy_reset() clearin...
2016-02-18 Stefan Roesenet: phy: marvell: Call phy_reset() where possible
2016-02-18 Stephen WarrenARM: tegra: enable USB device mode port on Dalmore
2016-02-18 Stephen WarrenARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNT
2016-02-17 Simon Glassvideo: tegra: Correct a Kconfig warning with VIDCONSOLE...
2016-02-16 Simon Glasstegra: video: Clean up the old LCD/PWM driver code
2016-02-16 Simon Glasstegra: video: Move LCD driver to use the DM PWM driver
2016-02-16 Simon Glasstegra: Convert CONFIG_PWM_TEGRA to Kconfig
2016-02-16 Simon Glasstegra: video: Move all fdt-decoding into a single function
2016-02-16 Simon Glasstegra: video: Move LCD enums into the driver
2016-02-16 Simon Glasstegra: video: Remove the static variables
2016-02-16 Simon Glasstegra: video: Convert tegra20 LCD driver to driver...
2016-02-16 Simon Glasstegra: video: Merge the two config structures together
2016-02-16 Simon Glasstegra: video: Move the check for CONFIG_OF_CONTROL...
2016-02-16 Simon Glasstegra: video: Merge the display driver into one file
2016-02-16 Simon Glasstegra: dts: Sync tegra20.dtsi with Linux v4.4
2016-02-16 Simon Glasstegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO...
2016-02-16 Simon Glasstegra: nyan-big: Move the LCD driver to driver model
2016-02-16 Simon Glasstegra: Allow CONFIG_DM_VIDEO to be used as well as...
2016-02-16 Simon Glasstegra: Allow driver model to be used for the PWM
2016-02-16 Simon Glasstegra: lcd: Merge tegra124-lcd.c into display.c
2016-02-16 Simon Glasstegra: pwm: Add a driver for the tegra PWM
2016-02-16 Simon Glasstegra: gpio: Show the GPIO value for outputs
2016-02-16 Simon Glasstegra: dts: Sync up nyan-big files with Linux
2016-02-16 Simon Glasstegra: dts: Sync up the tegra124 device tree files...
2016-02-16 Simon Glasstegra: mmc: Fix comments in the MMC driver init
2016-02-16 Simon Glassdm: video: Flush the cache after a puts()
2016-02-16 Simon Glasstegra: keyboard: Fix the init order
2016-02-15 Tom RiniPrepare v2016.03-rc2 v2016.03-rc2
2016-02-15 Stephen Warrentest/py: put "Starting U-Boot" into separate log section
2016-02-15 Stephen Warrentest/py: handle exceptions in console creation
2016-02-15 Stephen Warrentest/py: print summary in test order
2016-02-15 Stephen Warrentest/py: fix CONFIG_SPL test
2016-02-15 Stephen WarrenEnable test/py for sandbox in Travis CI
2016-02-15 Stephen Warrentest/py: don't import pexpect
2016-02-15 Stephen Warrentest/py: add docs for gdbserver and pytest options
2016-02-15 Stephen Warrentest/py: run all "ut" subtests
2016-02-15 Stephen WarrenMakefile: generate symbol list from u-boot
next