projects / oweals / u-boot.git / search
| 2019-12-27 | Troy Kisky | ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL' Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-12-27 | Troy Kisky | nitrogen6x: prepare for CONFIG_MX6QDL Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-10-08 | Troy Kisky | configs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-10-08 | Troy Kisky | configs: nitrogen6x: Add DM_GPIO support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-10-08 | Troy Kisky | nitrogen6x: reserve used gpios Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-10-08 | Troy Kisky | configs: nitrogen6x: Add DM_MMC/DM_USB/AHCI support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2019-10-08 | Troy Kisky | nitrogen6x: migrate to using device tree Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2018-08-10 | Troy Kisky | sata: fix sata_Probe return value check Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2017-04-14 | Troy Kisky | usb: return 0 from usb_stor_get_info even if removable... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2015-10-07 | Troy Kisky | imximage: fix commands other than write_data Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2015-10-07 | Troy Kisky | imximage: header.length of 4 is valid Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2014-10-06 | Troy Kisky | nitrogen6x: config: allow more bootargs parameters Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2014-10-06 | Troy Kisky | nitrogen6x: phy: add 100 us delay after phy reset Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2014-10-06 | Troy Kisky | nitrogen6x: configure SGTL5000, CSI camera clock outputs Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2014-10-06 | Troy Kisky | nitrogen6x: simplify board_mmc_getcd Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-22 | Troy Kisky | usb: rename board_usb_init_type to usb_init_type Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: udc: add udc.h include file Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: split mv_udc.h file Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: optimize ep_enable Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: optimize bounce Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: fix full speed connections Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: ehci-mx6: add support for otg port Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: ehci-hcd: add enum usb_init_type parameter to... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: add enum usb_init_type parameter to usb_lowlevel_init Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: rename board_usb_init_type to usb_init_type Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | nitrogen6x: add CONFIG_MV_UDC Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | nitrogen6x: add otg usb host/device mode support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | mx6: iomux: add GPR1 defines for use with nitrogen6x Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: clear desc upon ep_disable Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: zero transfer descriptor memory... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: flush item before head Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: set is_dualspeed = 1 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: mv_udc: fix typo in error message Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: ether: return error from rx_submit if... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-10-20 | Troy Kisky | usb: gadget: ether set wMaxPacketSize Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-09-24 | Troy Kisky | usb: gadget: config: fix unaligned access issues Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-07-20 | Troy Kisky | ddr cfg: DRAM_RESET needs 0x00020030 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | mx6qsabrelite: search mii phy address 4-7 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: get phydev before fec_probe Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: only call phy_connect in fec_probe Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: use fec_set_dev_name to set name Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | phy: add phy_find_by_mask/phy_connect_dev Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: change fec_mii_setspeed parameter Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | net: fec_mxc: delete CONFIG_FEC_MXC_MULTI Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-28 | Troy Kisky | doc/README.fec_mxc: add documentation Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-22 | Troy Kisky | imximage.cfg: run files through C preprocessor Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2013-01-13 | Troy Kisky | mx31/mx35/mx51/mx53/mx6: add watchdog Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-11-10 | Troy Kisky | arch-mx6: add mx6dl_pins.h Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-11-10 | Troy Kisky | imx-common: cpu: add imx_ddr_size Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-11-10 | Troy Kisky | mx6: use CONFIG_MX6 instead of CONFIG_MX6Q Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-11-10 | Troy Kisky | mx6: soc: update get_cpu_rev and get_imx_type for mx6solo... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: make set_imx_hdr_v1/v2 easier to read Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: change parameters to set_imx_hdr Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: delay setting of image size Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: fix size of image to load. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: move flash_offset check to common location Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: remove redundant setting of app_dest_ptr Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-10-20 | Troy Kisky | imximage: check dcd_len as entries added Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-09-01 | Troy Kisky | USB: Fix strict aliasing in ohci-hcd Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-09-01 | Troy Kisky | mx53evk: add boot_mode support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-09-01 | Troy Kisky | mx6qsabrelite: add boot_mode support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-09-01 | Troy Kisky | imx-common/cmd_bmode.c: add imx bmode (bootmode) command Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-09-01 | Troy Kisky | iomux: move IOMUX_GPR13_xxx defines Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mx6qsabrelite: add i2c multi-bus support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | imx-common: add i2c.c for bus recovery support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | i.mx53: add definition for I2C3_BASE_ADDR Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | i.mx: iomux-v3.c: move to imx-common directory Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | i.mx: iomux-v3.h: move to imx-common include directory Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | iomux-v3: remove include of mx6x_pins.h Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: add bus recovery support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: prep work for multiple busses support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: add i2c_regs argument to i2c_imx_stop Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: add retries Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: check for arbitration lost Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: change slave addr if conflicts with destination. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: don't disable controller after every transaction Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: place i2c_reset code inline Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: place imx_start code inline Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: remove redundant read Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c.c: code i2c_probe as a 0 length i2c_write Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: create i2c_init_transfer Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: clear i2sr before waiting for bit Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: create tx_byte function Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: remove ifdef of CONFIG_HARD_I2C Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-31 | Troy Kisky | mxc_i2c: fix i2c_imx_stop Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-11 | Troy Kisky | net: phy: micrel: make ksz9021 phy accessible Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-11 | Troy Kisky | mxc_i2c: remove setting speed at each start Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-11 | Troy Kisky | mx6qsabrelite: add i2c support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-11 | Troy Kisky | mxc_i2c: specify i2c base address in config file Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-07-07 | Troy Kisky | DaVinci: fix ddr2 vtp i/o calibration Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-04-16 | Troy Kisky | MX53: DDR: Fix ZQHWCTRL field TZQ_CS Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-02-27 | Troy Kisky | i.mx6q: mx6qsabrelite: Update the network configuration Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-02-27 | Troy Kisky | net: phy: make board_phy_config responsible for calling... Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-02-27 | Troy Kisky | net: phy: add support for Micrel's KSZ9021 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| 2012-02-27 | Troy Kisky | net: fec_mxc: add PHYLIB support Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> |
commit | commitdiff | tree |
| next | |||